1 files changed, 0 insertions, 202 deletions
diff --git a/tests/auto/declarative/parserstress/tests/ecma/String/15.5.4.9-1.js b/tests/auto/declarative/parserstress/tests/ecma/String/15.5.4.9-1.js
deleted file mode 100644
index 2184c60f45..0000000000
--- a/tests/auto/declarative/parserstress/tests/ecma/String/15.5.4.9-1.js
+++ /dev/null
@@ -1,202 +0,0 @@
-/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Mozilla Communicator client code, released
- * March 31, 1998.
- *
- * The Initial Developer of the Original Code is
- * Netscape Communications Corporation.
- * Portions created by the Initial Developer are Copyright (C) 1998
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-gTestfile = '15.5.4.9-1.js';
-
-/**
-   File Name:          15.5.4.9-1.js
-   ECMA Section:       15.5.4.9 String.prototype.substring( start )
-   Description:
-
-   15.5.4.9 String.prototype.substring(start)
-
-   Returns a substring of the result of converting this object to a string,
-   starting from character position start and running to the end of the
-   string. The result is a string value, not a String object.
-
-   If the argument is NaN or negative, it is replaced with zero; if the
-   argument is larger than the length of the string, it is replaced with the
-   length of the string.
-
-   When the substring method is called with one argument start, the following
-   steps are taken:
-
-   1.Call ToString, giving it the this value as its argument.
-   2.Call ToInteger(start).
-   3.Compute the number of characters in Result(1).
-   4.Compute min(max(Result(2), 0), Result(3)).
-   5.Return a string whose length is the difference between Result(3) and Result(4),
-   containing characters from Result(1), namely the characters with indices Result(4)
-   through Result(3)1, in ascending order.
-
-   Author:             christine@netscape.com
-   Date:               12 november 1997
-*/
-
-var SECTION = "15.5.4.9-1";
-var VERSION = "ECMA_1";
-startTest();
-var TITLE   = "String.prototype.substring( start )";
-
-writeHeaderToLog( SECTION + " "+ TITLE);
-
-new TestCase( SECTION,  "String.prototype.substring.length",        2,          String.prototype.substring.length );
-new TestCase( SECTION,  "delete String.prototype.substring.length", false,      delete String.prototype.substring.length );
-new TestCase( SECTION,  "delete String.prototype.substring.length; String.prototype.substring.length", 2,      eval("delete String.prototype.substring.length; String.prototype.substring.length") );
-
-// test cases for when substring is called with no arguments.
-
-// this is a string object
-
-new TestCase(   SECTION,
-		"var s = new String('this is a string object'); typeof s.substring()",
-		"string",
-		eval("var s = new String('this is a string object'); typeof s.substring()") );
-
-new TestCase(   SECTION,
-		"var s = new String(''); s.substring()",
-		"",
-		eval("var s = new String(''); s.substring()") );
-
-
-new TestCase(   SECTION,
-		"var s = new String('this is a string object'); s.substring()",
-		"this is a string object",
-		eval("var s = new String('this is a string object'); s.substring()") );
-
-new TestCase(   SECTION,
-		"var s = new String('this is a string object'); s.substring(NaN)",
-		"this is a string object",
-		eval("var s = new String('this is a string object'); s.substring(NaN)") );
-
-
-new TestCase(   SECTION,
-		"var s = new String('this is a string object'); s.substring(-0.01)",
-		"this is a string object",
-		eval("var s = new String('this is a string object'); s.substring(-0.01)") );
-
-
-new TestCase(   SECTION,
-		"var s = new String('this is a string object'); s.substring(s.length)",
-		"",
-		eval("var s = new String('this is a string object'); s.substring(s.length)") );
-
-new TestCase(   SECTION,
-		"var s = new String('this is a string object'); s.substring(s.length+1)",
-		"",
-		eval("var s = new String('this is a string object'); s.substring(s.length+1)") );
-
-
-new TestCase(   SECTION,
-		"var s = new String('this is a string object'); s.substring(Infinity)",
-		"",
-		eval("var s = new String('this is a string object'); s.substring(Infinity)") );
-
-new TestCase(   SECTION,
-		"var s = new String('this is a string object'); s.substring(-Infinity)",
-		"this is a string object",
-		eval("var s = new String('this is a string object'); s.substring(-Infinity)") );
-
-// this is not a String object, start is not an integer
-
-
-new TestCase(   SECTION,
-		"var s = new Array(1,2,3,4,5); s.substring = String.prototype.substring; s.substring()",
-		"1,2,3,4,5",
-		eval("var s = new Array(1,2,3,4,5); s.substring = String.prototype.substring; s.substring()") );
-
-new TestCase(   SECTION,
-		"var s = new Array(1,2,3,4,5); s.substring = String.prototype.substring; s.substring(true)",
-		",2,3,4,5",
-		eval("var s = new Array(1,2,3,4,5); s.substring = String.prototype.substring; s.substring(true)") );
-
-new TestCase(   SECTION,
-		"var s = new Array(1,2,3,4,5); s.substring = String.prototype.substring; s.substring('4')",
-		"3,4,5",
-		eval("var s = new Array(1,2,3,4,5); s.substring = String.prototype.substring; s.substring('4')") );
-
-new TestCase(   SECTION,
-		"var s = new Array(); s.substring = String.prototype.substring; s.substring('4')",
-		"",
-		eval("var s = new Array(); s.substring = String.prototype.substring; s.substring('4')") );
-
-// this is an object object
-new TestCase(   SECTION,
-		"var obj = new Object(); obj.substring = String.prototype.substring; obj.substring(8)",
-		"Object]",
-		eval("var obj = new Object(); obj.substring = String.prototype.substring; obj.substring(8)") );
-
-// this is a function object
-new TestCase(   SECTION,
-		"var obj = new Function(); obj.substring = String.prototype.substring; obj.toString = Object.prototype.toString; obj.substring(8)",
-		"Function]",
-		eval("var obj = new Function(); obj.substring = String.prototype.substring; obj.toString = Object.prototype.toString; obj.substring(8)") );
-// this is a number object
-new TestCase(   SECTION,
-		"var obj = new Number(NaN); obj.substring = String.prototype.substring; obj.substring(false)",
-		"NaN",
-		eval("var obj = new Number(NaN); obj.substring = String.prototype.substring; obj.substring(false)") );
-
-// this is the Math object
-new TestCase(   SECTION,
-		"var obj = Math; obj.substring = String.prototype.substring; obj.substring(Math.PI)",
-		"ject Math]",
-		eval("var obj = Math; obj.substring = String.prototype.substring; obj.substring(Math.PI)") );
-
-// this is a Boolean object
-
-new TestCase(   SECTION,
-		"var obj = new Boolean(); obj.substring = String.prototype.substring; obj.substring(new Array())",
-		"false",
-		eval("var obj = new Boolean(); obj.substring = String.prototype.substring; obj.substring(new Array())") );
-
-// this is a user defined object
-
-new TestCase( SECTION,
-	      "var obj = new MyObject( null ); obj.substring(0)",
-	      "null",
-	      eval( "var obj = new MyObject( null ); obj.substring(0)") );
-
-
-test();
-
-function MyObject( value ) {
-  this.value = value;
-  this.substring = String.prototype.substring;
-  this.toString = new Function ( "return this.value+''" );
-}