1 files changed, 186 insertions, 0 deletions
diff --git a/tests/auto/qml/parserstress/tests/ecma/Date/15.9.4.3.js b/tests/auto/qml/parserstress/tests/ecma/Date/15.9.4.3.js
new file mode 100644
index 0000000000..b0549588aa
--- /dev/null
+++ b/tests/auto/qml/parserstress/tests/ecma/Date/15.9.4.3.js
@@ -0,0 +1,186 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is Mozilla Communicator client code, released
+ * March 31, 1998.
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+gTestfile = '15.9.4.3.js';
+
+var SECTION = "15.9.4.3";
+var TITLE = "Date.UTC( year, month, date, hours, minutes, seconds, ms )";
+startTest();
+
+// Dates around 1970
+
+addNewTestCase( Date.UTC( 1970,0,1,0,0,0,0),
+		"Date.UTC( 1970,0,1,0,0,0,0)",
+		utc(1970,0,1,0,0,0,0) );
+
+addNewTestCase( Date.UTC( 1969,11,31,23,59,59,999),
+		"Date.UTC( 1969,11,31,23,59,59,999)",
+		utc(1969,11,31,23,59,59,999) );
+addNewTestCase( Date.UTC( 1972,1,29,23,59,59,999),
+		"Date.UTC( 1972,1,29,23,59,59,999)",
+		utc(1972,1,29,23,59,59,999) );
+addNewTestCase( Date.UTC( 1972,2,1,23,59,59,999),
+		"Date.UTC( 1972,2,1,23,59,59,999)",
+		utc(1972,2,1,23,59,59,999) );
+addNewTestCase( Date.UTC( 1968,1,29,23,59,59,999),
+		"Date.UTC( 1968,1,29,23,59,59,999)",
+		utc(1968,1,29,23,59,59,999) );
+addNewTestCase( Date.UTC( 1968,2,1,23,59,59,999),
+		"Date.UTC( 1968,2,1,23,59,59,999)",
+		utc(1968,2,1,23,59,59,999) );
+addNewTestCase( Date.UTC( 1969,0,1,0,0,0,0),
+		"Date.UTC( 1969,0,1,0,0,0,0)",
+		utc(1969,0,1,0,0,0,0) );
+addNewTestCase( Date.UTC( 1969,11,31,23,59,59,1000),
+		"Date.UTC( 1969,11,31,23,59,59,1000)",
+		utc(1970,0,1,0,0,0,0) );
+addNewTestCase( Date.UTC( 1969,Number.NaN,31,23,59,59,999),
+		"Date.UTC( 1969,Number.NaN,31,23,59,59,999)",
+		utc(1969,Number.NaN,31,23,59,59,999) );
+
+// Dates around 2000
+
+addNewTestCase( Date.UTC( 1999,11,31,23,59,59,999),
+		"Date.UTC( 1999,11,31,23,59,59,999)",
+		utc(1999,11,31,23,59,59,999) );
+addNewTestCase( Date.UTC( 2000,0,1,0,0,0,0),
+		"Date.UTC( 2000,0,1,0,0,0,0)",
+		utc(2000,0,1,0,0,0,0) );
+
+// Dates around 1900
+addNewTestCase( Date.UTC( 1899,11,31,23,59,59,999),
+		"Date.UTC( 1899,11,31,23,59,59,999)",
+		utc(1899,11,31,23,59,59,999) );
+addNewTestCase( Date.UTC( 1900,0,1,0,0,0,0),
+		"Date.UTC( 1900,0,1,0,0,0,0)",
+		utc(1900,0,1,0,0,0,0) );
+addNewTestCase( Date.UTC( 1973,0,1,0,0,0,0),
+		"Date.UTC( 1973,0,1,0,0,0,0)",
+		utc(1973,0,1,0,0,0,0) );
+addNewTestCase( Date.UTC( 1776,6,4,12,36,13,111),
+		"Date.UTC( 1776,6,4,12,36,13,111)",
+		utc(1776,6,4,12,36,13,111) );
+addNewTestCase( Date.UTC( 2525,9,18,15,30,1,123),
+		"Date.UTC( 2525,9,18,15,30,1,123)",
+		utc(2525,9,18,15,30,1,123) );
+
+// Dates around 29 Feb 2000
+
+addNewTestCase( Date.UTC( 2000,1,29,0,0,0,0 ),
+		"Date.UTC( 2000,1,29,0,0,0,0 )",
+		utc(2000,1,29,0,0,0,0) );
+addNewTestCase( Date.UTC( 2000,1,29,8,0,0,0 ),
+		"Date.UTC( 2000,1,29,8,0,0,0 )",
+		utc(2000,1,29,8,0,0,0) );
+
+// Dates around 1 Jan 2005
+
+addNewTestCase( Date.UTC( 2005,0,1,0,0,0,0 ),
+		"Date.UTC( 2005,0,1,0,0,0,0 )",
+		utc(2005,0,1,0,0,0,0) );
+addNewTestCase( Date.UTC( 2004,11,31,16,0,0,0 ),
+		"Date.UTC( 2004,11,31,16,0,0,0 )",
+		utc(2004,11,31,16,0,0,0) );
+
+test();
+
+function addNewTestCase( DateCase, DateString, ExpectDate) {
+  DateCase = DateCase;
+
+  new TestCase( SECTION, DateString,         ExpectDate.value,       DateCase );
+  new TestCase( SECTION, DateString,         ExpectDate.value,       DateCase );
+}
+
+function MyDate() {
+  this.year = 0;
+  this.month = 0;
+  this.date = 0;
+  this.hours = 0;
+  this.minutes = 0;
+  this.seconds = 0;
+  this.ms = 0;
+}
+
+function utc( year, month, date, hours, minutes, seconds, ms ) {
+  d = new MyDate();
+  d.year      = Number(year);
+
+  if (month)
+    d.month     = Number(month);
+  if (date)
+    d.date      = Number(date);
+  if (hours)
+    d.hours     = Number(hours);
+  if (minutes)
+    d.minutes   = Number(minutes);
+  if (seconds)
+    d.seconds   = Number(seconds);
+  if (ms)
+    d.ms        = Number(ms);
+
+  if ( isNaN(d.year) && 0 <= ToInteger(d.year) && d.year <= 99 ) {
+    d.year = 1900 + ToInteger(d.year);
+  }
+
+  if (isNaN(month) || isNaN(year) || isNaN(date) || isNaN(hours) ||
+      isNaN(minutes) || isNaN(seconds) || isNaN(ms) ) {
+    d.year = Number.NaN;
+    d.month = Number.NaN;
+    d.date = Number.NaN;
+    d.hours = Number.NaN;
+    d.minutes = Number.NaN;
+    d.seconds = Number.NaN;
+    d.ms = Number.NaN;
+    d.value = Number.NaN;
+    d.time = Number.NaN;
+    d.day =Number.NaN;
+    return d;
+  }
+
+  d.day = MakeDay( d.year, d.month, d.date );
+  d.time = MakeTime( d.hours, d.minutes, d.seconds, d.ms );
+  d.value = (TimeClip( MakeDate(d.day,d.time)));
+
+  return d;
+}
+
+function UTCTime( t ) {
+  sign = ( t < 0 ) ? -1 : 1;
+  return ( (t +(TZ_DIFF*msPerHour)) );
+}
+