diff options
Diffstat (limited to 'tests/auto/qml/parserstress/tests/ecma/Expressions/11.2.1-1.js')
| -rw-r--r-- | tests/auto/qml/parserstress/tests/ecma/Expressions/11.2.1-1.js | 272 |
1 files changed, 272 insertions, 0 deletions
diff --git a/tests/auto/qml/parserstress/tests/ecma/Expressions/11.2.1-1.js b/tests/auto/qml/parserstress/tests/ecma/Expressions/11.2.1-1.js new file mode 100644 index 0000000000..91e25b01f1 --- /dev/null +++ b/tests/auto/qml/parserstress/tests/ecma/Expressions/11.2.1-1.js @@ -0,0 +1,272 @@ +/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is Mozilla Communicator client code, released + * March 31, 1998. + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +gTestfile = '11.2.1-1.js'; + +/** + File Name: 11.2.1-1.js + ECMA Section: 11.2.1 Property Accessors + Description: + + Properties are accessed by name, using either the dot notation: + MemberExpression . Identifier + CallExpression . Identifier + + or the bracket notation: MemberExpression [ Expression ] + CallExpression [ Expression ] + + The dot notation is explained by the following syntactic conversion: + MemberExpression . Identifier + is identical in its behavior to + MemberExpression [ <identifier-string> ] + and similarly + CallExpression . Identifier + is identical in its behavior to + CallExpression [ <identifier-string> ] + where <identifier-string> is a string literal containing the same sequence + of characters as the Identifier. + + The production MemberExpression : MemberExpression [ Expression ] is + evaluated as follows: + + 1. Evaluate MemberExpression. + 2. Call GetValue(Result(1)). + 3. Evaluate Expression. + 4. Call GetValue(Result(3)). + 5. Call ToObject(Result(2)). + 6. Call ToString(Result(4)). + 7. Return a value of type Reference whose base object is Result(5) and + whose property name is Result(6). + + The production CallExpression : CallExpression [ Expression ] is evaluated + in exactly the same manner, except that the contained CallExpression is + evaluated in step 1. + + Author: christine@netscape.com + Date: 12 november 1997 +*/ +var SECTION = "11.2.1-1"; +var VERSION = "ECMA_1"; +startTest(); +var TITLE = "Property Accessors"; +writeHeaderToLog( SECTION + " "+TITLE ); + +// go through all Native Function objects, methods, and properties and get their typeof. + +var PROPERTY = new Array(); +var p = 0; + +// properties and functions of the global object + +PROPERTY[p++] = new Property( "this", "NaN", "number" ); +PROPERTY[p++] = new Property( "this", "Infinity", "number" ); +PROPERTY[p++] = new Property( "this", "eval", "function" ); +PROPERTY[p++] = new Property( "this", "parseInt", "function" ); +PROPERTY[p++] = new Property( "this", "parseFloat", "function" ); +PROPERTY[p++] = new Property( "this", "escape", "function" ); +PROPERTY[p++] = new Property( "this", "unescape", "function" ); +PROPERTY[p++] = new Property( "this", "isNaN", "function" ); +PROPERTY[p++] = new Property( "this", "isFinite", "function" ); +PROPERTY[p++] = new Property( "this", "Object", "function" ); +PROPERTY[p++] = new Property( "this", "Number", "function" ); +PROPERTY[p++] = new Property( "this", "Function", "function" ); +PROPERTY[p++] = new Property( "this", "Array", "function" ); +PROPERTY[p++] = new Property( "this", "String", "function" ); +PROPERTY[p++] = new Property( "this", "Boolean", "function" ); +PROPERTY[p++] = new Property( "this", "Date", "function" ); +PROPERTY[p++] = new Property( "this", "Math", "object" ); + +// properties and methods of Object objects + +PROPERTY[p++] = new Property( "Object", "prototype", "object" ); +PROPERTY[p++] = new Property( "Object", "toString", "function" ); +PROPERTY[p++] = new Property( "Object", "valueOf", "function" ); +PROPERTY[p++] = new Property( "Object", "constructor", "function" ); + +// properties of the Function object + +PROPERTY[p++] = new Property( "Function", "prototype", "function" ); +PROPERTY[p++] = new Property( "Function.prototype", "toString", "function" ); +PROPERTY[p++] = new Property( "Function.prototype", "length", "number" ); +PROPERTY[p++] = new Property( "Function.prototype", "valueOf", "function" ); + +Function.prototype.myProperty = "hi"; + +PROPERTY[p++] = new Property( "Function.prototype", "myProperty", "string" ); + +// properties of the Array object +PROPERTY[p++] = new Property( "Array", "prototype", "object" ); +PROPERTY[p++] = new Property( "Array", "length", "number" ); +PROPERTY[p++] = new Property( "Array.prototype", "constructor", "function" ); +PROPERTY[p++] = new Property( "Array.prototype", "toString", "function" ); +PROPERTY[p++] = new Property( "Array.prototype", "join", "function" ); +PROPERTY[p++] = new Property( "Array.prototype", "reverse", "function" ); +PROPERTY[p++] = new Property( "Array.prototype", "sort", "function" ); + +// properties of the String object +PROPERTY[p++] = new Property( "String", "prototype", "object" ); +PROPERTY[p++] = new Property( "String", "fromCharCode", "function" ); +PROPERTY[p++] = new Property( "String.prototype", "toString", "function" ); +PROPERTY[p++] = new Property( "String.prototype", "constructor", "function" ); +PROPERTY[p++] = new Property( "String.prototype", "valueOf", "function" ); +PROPERTY[p++] = new Property( "String.prototype", "charAt", "function" ); +PROPERTY[p++] = new Property( "String.prototype", "charCodeAt", "function" ); +PROPERTY[p++] = new Property( "String.prototype", "indexOf", "function" ); +PROPERTY[p++] = new Property( "String.prototype", "lastIndexOf", "function" ); +PROPERTY[p++] = new Property( "String.prototype", "split", "function" ); +PROPERTY[p++] = new Property( "String.prototype", "substring", "function" ); +PROPERTY[p++] = new Property( "String.prototype", "toLowerCase", "function" ); +PROPERTY[p++] = new Property( "String.prototype", "toUpperCase", "function" ); +PROPERTY[p++] = new Property( "String.prototype", "length", "number" ); + +// properties of the Boolean object +PROPERTY[p++] = new Property( "Boolean", "prototype", "object" ); +PROPERTY[p++] = new Property( "Boolean", "constructor", "function" ); +PROPERTY[p++] = new Property( "Boolean.prototype", "valueOf", "function" ); +PROPERTY[p++] = new Property( "Boolean.prototype", "toString", "function" ); + +// properties of the Number object + +PROPERTY[p++] = new Property( "Number", "MAX_VALUE", "number" ); +PROPERTY[p++] = new Property( "Number", "MIN_VALUE", "number" ); +PROPERTY[p++] = new Property( "Number", "NaN", "number" ); +PROPERTY[p++] = new Property( "Number", "NEGATIVE_INFINITY", "number" ); +PROPERTY[p++] = new Property( "Number", "POSITIVE_INFINITY", "number" ); +PROPERTY[p++] = new Property( "Number.prototype", "toString", "function" ); +PROPERTY[p++] = new Property( "Number.prototype", "constructor", "function" ); +PROPERTY[p++] = new Property( "Number.prototype", "valueOf", "function" ); + +// properties of the Math Object. +PROPERTY[p++] = new Property( "Math", "E", "number" ); +PROPERTY[p++] = new Property( "Math", "LN10", "number" ); +PROPERTY[p++] = new Property( "Math", "LN2", "number" ); +PROPERTY[p++] = new Property( "Math", "LOG2E", "number" ); +PROPERTY[p++] = new Property( "Math", "LOG10E", "number" ); +PROPERTY[p++] = new Property( "Math", "PI", "number" ); +PROPERTY[p++] = new Property( "Math", "SQRT1_2", "number" ); +PROPERTY[p++] = new Property( "Math", "SQRT2", "number" ); +PROPERTY[p++] = new Property( "Math", "abs", "function" ); +PROPERTY[p++] = new Property( "Math", "acos", "function" ); +PROPERTY[p++] = new Property( "Math", "asin", "function" ); +PROPERTY[p++] = new Property( "Math", "atan", "function" ); +PROPERTY[p++] = new Property( "Math", "atan2", "function" ); +PROPERTY[p++] = new Property( "Math", "ceil", "function" ); +PROPERTY[p++] = new Property( "Math", "cos", "function" ); +PROPERTY[p++] = new Property( "Math", "exp", "function" ); +PROPERTY[p++] = new Property( "Math", "floor", "function" ); +PROPERTY[p++] = new Property( "Math", "log", "function" ); +PROPERTY[p++] = new Property( "Math", "max", "function" ); +PROPERTY[p++] = new Property( "Math", "min", "function" ); +PROPERTY[p++] = new Property( "Math", "pow", "function" ); +PROPERTY[p++] = new Property( "Math", "random", "function" ); +PROPERTY[p++] = new Property( "Math", "round", "function" ); +PROPERTY[p++] = new Property( "Math", "sin", "function" ); +PROPERTY[p++] = new Property( "Math", "sqrt", "function" ); +PROPERTY[p++] = new Property( "Math", "tan", "function" ); + +// properties of the Date object +PROPERTY[p++] = new Property( "Date", "parse", "function" ); +PROPERTY[p++] = new Property( "Date", "prototype", "object" ); +PROPERTY[p++] = new Property( "Date", "UTC", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "constructor", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "toString", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "valueOf", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "getTime", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "getYear", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "getFullYear", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "getUTCFullYear", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "getMonth", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "getUTCMonth", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "getDate", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "getUTCDate", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "getDay", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "getUTCDay", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "getHours", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "getUTCHours", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "getMinutes", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "getUTCMinutes", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "getSeconds", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "getUTCSeconds", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "getMilliseconds","function" ); +PROPERTY[p++] = new Property( "Date.prototype", "getUTCMilliseconds", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "setTime", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "setMilliseconds","function" ); +PROPERTY[p++] = new Property( "Date.prototype", "setUTCMilliseconds", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "setSeconds", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "setUTCSeconds", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "setMinutes", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "setUTCMinutes", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "setHours", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "setUTCHours", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "setDate", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "setUTCDate", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "setMonth", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "setUTCMonth", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "setFullYear", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "setUTCFullYear", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "setYear", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "toLocaleString", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "toUTCString", "function" ); +PROPERTY[p++] = new Property( "Date.prototype", "toGMTString", "function" ); + +for ( var i = 0, RESULT; i < PROPERTY.length; i++ ) { + RESULT = eval("typeof " + PROPERTY[i].object + "." + PROPERTY[i].name ); + + new TestCase( SECTION, + "typeof " + PROPERTY[i].object + "." + PROPERTY[i].name, + PROPERTY[i].type, + RESULT ); + + RESULT = eval("typeof " + PROPERTY[i].object + "['" + PROPERTY[i].name +"']"); + + new TestCase( SECTION, + "typeof " + PROPERTY[i].object + "['" + PROPERTY[i].name +"']", + PROPERTY[i].type, + RESULT ); +} + +test(); + +function MyObject( arg0, arg1, arg2, arg3, arg4 ) { + this.name = arg0; +} +function Property( object, name, type ) { + this.object = object; + this.name = name; + this.type = type; +} |