diff options
Diffstat (limited to 'tests/auto/qml/parserstress/tests/ecma/GlobalObject/15.1.2.3-1.js')
| -rw-r--r-- | tests/auto/qml/parserstress/tests/ecma/GlobalObject/15.1.2.3-1.js | 441 |
1 files changed, 441 insertions, 0 deletions
diff --git a/tests/auto/qml/parserstress/tests/ecma/GlobalObject/15.1.2.3-1.js b/tests/auto/qml/parserstress/tests/ecma/GlobalObject/15.1.2.3-1.js new file mode 100644 index 0000000000..56bf83adcc --- /dev/null +++ b/tests/auto/qml/parserstress/tests/ecma/GlobalObject/15.1.2.3-1.js @@ -0,0 +1,441 @@ +/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is Mozilla Communicator client code, released + * March 31, 1998. + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +gTestfile = '15.1.2.3-1.js'; + +/** + File Name: 15.1.2.3.js + ECMA Section: 15.1.2.3 Function properties of the global object: + parseFloat( string ) + + Description: The parseFloat function produces a number value dictated + by the interpretation of the contents of the string + argument defined as a decimal literal. + + When the parseFloat function is called, the following + steps are taken: + + 1. Call ToString( string ). + 2. Remove leading whitespace Result(1). + 3. If neither Result(2) nor any prefix of Result(2) + satisfies the syntax of a StrDecimalLiteral, + return NaN. + 4. Compute the longest prefix of Result(2) which might + be Resusult(2) itself, that satisfies the syntax of + a StrDecimalLiteral + 5. Return the number value for the MV of Result(4). + + Note that parseFloate may interpret only a leading + portion of the string as a number value; it ignores any + characters that cannot be interpreted as part of the + notation of a decimal literal, and no indication is given + that such characters were ignored. + + StrDecimalLiteral:: + Infinity + DecimalDigits.DecimalDigits opt ExponentPart opt + .DecimalDigits ExponentPart opt + DecimalDigits ExponentPart opt + + Author: christine@netscape.com + Date: 28 october 1997 + +*/ + +var SECTION = "15.1.2.3-1"; +var VERSION = "ECMA_1"; +var TITLE = "parseFloat(string)"; +var BUGNUMBER="none"; + +startTest(); +writeHeaderToLog( SECTION + " "+ TITLE); + +new TestCase( SECTION, "parseFloat.length", 1, parseFloat.length ); + +new TestCase( SECTION, "parseFloat.length = null; parseFloat.length", 1, eval("parseFloat.length = null; parseFloat.length") ); +new TestCase( SECTION, "delete parseFloat.length", false, delete parseFloat.length ); +new TestCase( SECTION, "delete parseFloat.length; parseFloat.length", 1, eval("delete parseFloat.length; parseFloat.length") ); +new TestCase( SECTION, "var MYPROPS=''; for ( var p in parseFloat ) { MYPROPS += p }; MYPROPS", "prototype", eval("var MYPROPS=''; for ( var p in parseFloat ) { MYPROPS += p }; MYPROPS") ); + +new TestCase( SECTION, "parseFloat()", Number.NaN, parseFloat() ); +new TestCase( SECTION, "parseFloat('')", Number.NaN, parseFloat('') ); + +new TestCase( SECTION, "parseFloat(' ')", Number.NaN, parseFloat(' ') ); +new TestCase( SECTION, "parseFloat(true)", Number.NaN, parseFloat(true) ); +new TestCase( SECTION, "parseFloat(false)", Number.NaN, parseFloat(false) ); +new TestCase( SECTION, "parseFloat('string')", Number.NaN, parseFloat("string") ); + +new TestCase( SECTION, "parseFloat(' Infinity')", Infinity, parseFloat("Infinity") ); +new TestCase( SECTION, "parseFloat(' Infinity ')", Infinity, parseFloat(' Infinity ') ); + +new TestCase( SECTION, "parseFloat('Infinity')", Infinity, parseFloat("Infinity") ); +new TestCase( SECTION, "parseFloat(Infinity)", Infinity, parseFloat(Infinity) ); + + +new TestCase( SECTION, "parseFloat(' +Infinity')", +Infinity, parseFloat("+Infinity") ); +new TestCase( SECTION, "parseFloat(' -Infinity ')", -Infinity, parseFloat(' -Infinity ') ); + +new TestCase( SECTION, "parseFloat('+Infinity')", +Infinity, parseFloat("+Infinity") ); +new TestCase( SECTION, "parseFloat(-Infinity)", -Infinity, parseFloat(-Infinity) ); + +new TestCase( SECTION, "parseFloat('0')", 0, parseFloat("0") ); +new TestCase( SECTION, "parseFloat('-0')", -0, parseFloat("-0") ); +new TestCase( SECTION, "parseFloat('+0')", 0, parseFloat("+0") ); + +new TestCase( SECTION, "parseFloat('1')", 1, parseFloat("1") ); +new TestCase( SECTION, "parseFloat('-1')", -1, parseFloat("-1") ); +new TestCase( SECTION, "parseFloat('+1')", 1, parseFloat("+1") ); + +new TestCase( SECTION, "parseFloat('2')", 2, parseFloat("2") ); +new TestCase( SECTION, "parseFloat('-2')", -2, parseFloat("-2") ); +new TestCase( SECTION, "parseFloat('+2')", 2, parseFloat("+2") ); + +new TestCase( SECTION, "parseFloat('3')", 3, parseFloat("3") ); +new TestCase( SECTION, "parseFloat('-3')", -3, parseFloat("-3") ); +new TestCase( SECTION, "parseFloat('+3')", 3, parseFloat("+3") ); + +new TestCase( SECTION, "parseFloat('4')", 4, parseFloat("4") ); +new TestCase( SECTION, "parseFloat('-4')", -4, parseFloat("-4") ); +new TestCase( SECTION, "parseFloat('+4')", 4, parseFloat("+4") ); + +new TestCase( SECTION, "parseFloat('5')", 5, parseFloat("5") ); +new TestCase( SECTION, "parseFloat('-5')", -5, parseFloat("-5") ); +new TestCase( SECTION, "parseFloat('+5')", 5, parseFloat("+5") ); + +new TestCase( SECTION, "parseFloat('6')", 6, parseFloat("6") ); +new TestCase( SECTION, "parseFloat('-6')", -6, parseFloat("-6") ); +new TestCase( SECTION, "parseFloat('+6')", 6, parseFloat("+6") ); + +new TestCase( SECTION, "parseFloat('7')", 7, parseFloat("7") ); +new TestCase( SECTION, "parseFloat('-7')", -7, parseFloat("-7") ); +new TestCase( SECTION, "parseFloat('+7')", 7, parseFloat("+7") ); + +new TestCase( SECTION, "parseFloat('8')", 8, parseFloat("8") ); +new TestCase( SECTION, "parseFloat('-8')", -8, parseFloat("-8") ); +new TestCase( SECTION, "parseFloat('+8')", 8, parseFloat("+8") ); + +new TestCase( SECTION, "parseFloat('9')", 9, parseFloat("9") ); +new TestCase( SECTION, "parseFloat('-9')", -9, parseFloat("-9") ); +new TestCase( SECTION, "parseFloat('+9')", 9, parseFloat("+9") ); + +new TestCase( SECTION, "parseFloat('3.14159')", 3.14159, parseFloat("3.14159") ); +new TestCase( SECTION, "parseFloat('-3.14159')", -3.14159, parseFloat("-3.14159") ); +new TestCase( SECTION, "parseFloat('+3.14159')", 3.14159, parseFloat("+3.14159") ); + +new TestCase( SECTION, "parseFloat('3.')", 3, parseFloat("3.") ); +new TestCase( SECTION, "parseFloat('-3.')", -3, parseFloat("-3.") ); +new TestCase( SECTION, "parseFloat('+3.')", 3, parseFloat("+3.") ); + +new TestCase( SECTION, "parseFloat('3.e1')", 30, parseFloat("3.e1") ); +new TestCase( SECTION, "parseFloat('-3.e1')", -30, parseFloat("-3.e1") ); +new TestCase( SECTION, "parseFloat('+3.e1')", 30, parseFloat("+3.e1") ); + +new TestCase( SECTION, "parseFloat('3.e+1')", 30, parseFloat("3.e+1") ); +new TestCase( SECTION, "parseFloat('-3.e+1')", -30, parseFloat("-3.e+1") ); +new TestCase( SECTION, "parseFloat('+3.e+1')", 30, parseFloat("+3.e+1") ); + +new TestCase( SECTION, "parseFloat('3.e-1')", .30, parseFloat("3.e-1") ); +new TestCase( SECTION, "parseFloat('-3.e-1')", -.30, parseFloat("-3.e-1") ); +new TestCase( SECTION, "parseFloat('+3.e-1')", .30, parseFloat("+3.e-1") ); + +// StrDecimalLiteral::: .DecimalDigits ExponentPart opt + +new TestCase( SECTION, "parseFloat('.00001')", 0.00001, parseFloat(".00001") ); +new TestCase( SECTION, "parseFloat('+.00001')", 0.00001, parseFloat("+.00001") ); +new TestCase( SECTION, "parseFloat('-0.0001')", -0.00001, parseFloat("-.00001") ); + +new TestCase( SECTION, "parseFloat('.01e2')", 1, parseFloat(".01e2") ); +new TestCase( SECTION, "parseFloat('+.01e2')", 1, parseFloat("+.01e2") ); +new TestCase( SECTION, "parseFloat('-.01e2')", -1, parseFloat("-.01e2") ); + +new TestCase( SECTION, "parseFloat('.01e+2')", 1, parseFloat(".01e+2") ); +new TestCase( SECTION, "parseFloat('+.01e+2')", 1, parseFloat("+.01e+2") ); +new TestCase( SECTION, "parseFloat('-.01e+2')", -1, parseFloat("-.01e+2") ); + +new TestCase( SECTION, "parseFloat('.01e-2')", 0.0001, parseFloat(".01e-2") ); +new TestCase( SECTION, "parseFloat('+.01e-2')", 0.0001, parseFloat("+.01e-2") ); +new TestCase( SECTION, "parseFloat('-.01e-2')", -0.0001, parseFloat("-.01e-2") ); + +// StrDecimalLiteral::: DecimalDigits ExponentPart opt + +new TestCase( SECTION, "parseFloat('1234e5')", 123400000, parseFloat("1234e5") ); +new TestCase( SECTION, "parseFloat('+1234e5')", 123400000, parseFloat("+1234e5") ); +new TestCase( SECTION, "parseFloat('-1234e5')", -123400000, parseFloat("-1234e5") ); + +new TestCase( SECTION, "parseFloat('1234e+5')", 123400000, parseFloat("1234e+5") ); +new TestCase( SECTION, "parseFloat('+1234e+5')", 123400000, parseFloat("+1234e+5") ); +new TestCase( SECTION, "parseFloat('-1234e+5')", -123400000, parseFloat("-1234e+5") ); + +new TestCase( SECTION, "parseFloat('1234e-5')", 0.01234, parseFloat("1234e-5") ); +new TestCase( SECTION, "parseFloat('+1234e-5')", 0.01234, parseFloat("+1234e-5") ); +new TestCase( SECTION, "parseFloat('-1234e-5')", -0.01234, parseFloat("-1234e-5") ); + + +new TestCase( SECTION, "parseFloat(0)", 0, parseFloat(0) ); +new TestCase( SECTION, "parseFloat(-0)", -0, parseFloat(-0) ); + +new TestCase( SECTION, "parseFloat(1)", 1, parseFloat(1) ); +new TestCase( SECTION, "parseFloat(-1)", -1, parseFloat(-1) ); + +new TestCase( SECTION, "parseFloat(2)", 2, parseFloat(2) ); +new TestCase( SECTION, "parseFloat(-2)", -2, parseFloat(-2) ); + +new TestCase( SECTION, "parseFloat(3)", 3, parseFloat(3) ); +new TestCase( SECTION, "parseFloat(-3)", -3, parseFloat(-3) ); + +new TestCase( SECTION, "parseFloat(4)", 4, parseFloat(4) ); +new TestCase( SECTION, "parseFloat(-4)", -4, parseFloat(-4) ); + +new TestCase( SECTION, "parseFloat(5)", 5, parseFloat(5) ); +new TestCase( SECTION, "parseFloat(-5)", -5, parseFloat(-5) ); + +new TestCase( SECTION, "parseFloat(6)", 6, parseFloat(6) ); +new TestCase( SECTION, "parseFloat(-6)", -6, parseFloat(-6) ); + +new TestCase( SECTION, "parseFloat(7)", 7, parseFloat(7) ); +new TestCase( SECTION, "parseFloat(-7)", -7, parseFloat(-7) ); + +new TestCase( SECTION, "parseFloat(8)", 8, parseFloat(8) ); +new TestCase( SECTION, "parseFloat(-8)", -8, parseFloat(-8) ); + +new TestCase( SECTION, "parseFloat(9)", 9, parseFloat(9) ); +new TestCase( SECTION, "parseFloat(-9)", -9, parseFloat(-9) ); + +new TestCase( SECTION, "parseFloat(3.14159)", 3.14159, parseFloat(3.14159) ); +new TestCase( SECTION, "parseFloat(-3.14159)", -3.14159, parseFloat(-3.14159) ); + +new TestCase( SECTION, "parseFloat(3.)", 3, parseFloat(3.) ); +new TestCase( SECTION, "parseFloat(-3.)", -3, parseFloat(-3.) ); + +new TestCase( SECTION, "parseFloat(3.e1)", 30, parseFloat(3.e1) ); +new TestCase( SECTION, "parseFloat(-3.e1)", -30, parseFloat(-3.e1) ); + +new TestCase( SECTION, "parseFloat(3.e+1)", 30, parseFloat(3.e+1) ); +new TestCase( SECTION, "parseFloat(-3.e+1)", -30, parseFloat(-3.e+1) ); + +new TestCase( SECTION, "parseFloat(3.e-1)", .30, parseFloat(3.e-1) ); +new TestCase( SECTION, "parseFloat(-3.e-1)", -.30, parseFloat(-3.e-1) ); + + +new TestCase( SECTION, "parseFloat(3.E1)", 30, parseFloat(3.E1) ); +new TestCase( SECTION, "parseFloat(-3.E1)", -30, parseFloat(-3.E1) ); + +new TestCase( SECTION, "parseFloat(3.E+1)", 30, parseFloat(3.E+1) ); +new TestCase( SECTION, "parseFloat(-3.E+1)", -30, parseFloat(-3.E+1) ); + +new TestCase( SECTION, "parseFloat(3.E-1)", .30, parseFloat(3.E-1) ); +new TestCase( SECTION, "parseFloat(-3.E-1)", -.30, parseFloat(-3.E-1) ); + +// StrDecimalLiteral::: .DecimalDigits ExponentPart opt + +new TestCase( SECTION, "parseFloat(.00001)", 0.00001, parseFloat(.00001) ); +new TestCase( SECTION, "parseFloat(-0.0001)", -0.00001, parseFloat(-.00001) ); + +new TestCase( SECTION, "parseFloat(.01e2)", 1, parseFloat(.01e2) ); +new TestCase( SECTION, "parseFloat(-.01e2)", -1, parseFloat(-.01e2) ); + +new TestCase( SECTION, "parseFloat(.01e+2)", 1, parseFloat(.01e+2) ); +new TestCase( SECTION, "parseFloat(-.01e+2)", -1, parseFloat(-.01e+2) ); + +new TestCase( SECTION, "parseFloat(.01e-2)", 0.0001, parseFloat(.01e-2) ); +new TestCase( SECTION, "parseFloat(-.01e-2)", -0.0001, parseFloat(-.01e-2) ); + +// StrDecimalLiteral::: DecimalDigits ExponentPart opt + +new TestCase( SECTION, "parseFloat(1234e5)", 123400000, parseFloat(1234e5) ); +new TestCase( SECTION, "parseFloat(-1234e5)", -123400000, parseFloat(-1234e5) ); + +new TestCase( SECTION, "parseFloat(1234e+5)", 123400000, parseFloat(1234e+5) ); +new TestCase( SECTION, "parseFloat(-1234e+5)", -123400000, parseFloat(-1234e+5) ); + +new TestCase( SECTION, "parseFloat(1234e-5)", 0.01234, parseFloat(1234e-5) ); +new TestCase( SECTION, "parseFloat(-1234e-5)", -0.01234, parseFloat(-1234e-5) ); + +// hex cases should all return 0 (0 is the longest string that satisfies a StringDecimalLiteral) + +new TestCase( SECTION, "parseFloat('0x0')", 0, parseFloat("0x0")); +new TestCase( SECTION, "parseFloat('0x1')", 0, parseFloat("0x1")); +new TestCase( SECTION, "parseFloat('0x2')", 0, parseFloat("0x2")); +new TestCase( SECTION, "parseFloat('0x3')", 0, parseFloat("0x3")); +new TestCase( SECTION, "parseFloat('0x4')", 0, parseFloat("0x4")); +new TestCase( SECTION, "parseFloat('0x5')", 0, parseFloat("0x5")); +new TestCase( SECTION, "parseFloat('0x6')", 0, parseFloat("0x6")); +new TestCase( SECTION, "parseFloat('0x7')", 0, parseFloat("0x7")); +new TestCase( SECTION, "parseFloat('0x8')", 0, parseFloat("0x8")); +new TestCase( SECTION, "parseFloat('0x9')", 0, parseFloat("0x9")); +new TestCase( SECTION, "parseFloat('0xa')", 0, parseFloat("0xa")); +new TestCase( SECTION, "parseFloat('0xb')", 0, parseFloat("0xb")); +new TestCase( SECTION, "parseFloat('0xc')", 0, parseFloat("0xc")); +new TestCase( SECTION, "parseFloat('0xd')", 0, parseFloat("0xd")); +new TestCase( SECTION, "parseFloat('0xe')", 0, parseFloat("0xe")); +new TestCase( SECTION, "parseFloat('0xf')", 0, parseFloat("0xf")); +new TestCase( SECTION, "parseFloat('0xA')", 0, parseFloat("0xA")); +new TestCase( SECTION, "parseFloat('0xB')", 0, parseFloat("0xB")); +new TestCase( SECTION, "parseFloat('0xC')", 0, parseFloat("0xC")); +new TestCase( SECTION, "parseFloat('0xD')", 0, parseFloat("0xD")); +new TestCase( SECTION, "parseFloat('0xE')", 0, parseFloat("0xE")); +new TestCase( SECTION, "parseFloat('0xF')", 0, parseFloat("0xF")); + +new TestCase( SECTION, "parseFloat('0X0')", 0, parseFloat("0X0")); +new TestCase( SECTION, "parseFloat('0X1')", 0, parseFloat("0X1")); +new TestCase( SECTION, "parseFloat('0X2')", 0, parseFloat("0X2")); +new TestCase( SECTION, "parseFloat('0X3')", 0, parseFloat("0X3")); +new TestCase( SECTION, "parseFloat('0X4')", 0, parseFloat("0X4")); +new TestCase( SECTION, "parseFloat('0X5')", 0, parseFloat("0X5")); +new TestCase( SECTION, "parseFloat('0X6')", 0, parseFloat("0X6")); +new TestCase( SECTION, "parseFloat('0X7')", 0, parseFloat("0X7")); +new TestCase( SECTION, "parseFloat('0X8')", 0, parseFloat("0X8")); +new TestCase( SECTION, "parseFloat('0X9')", 0, parseFloat("0X9")); +new TestCase( SECTION, "parseFloat('0Xa')", 0, parseFloat("0Xa")); +new TestCase( SECTION, "parseFloat('0Xb')", 0, parseFloat("0Xb")); +new TestCase( SECTION, "parseFloat('0Xc')", 0, parseFloat("0Xc")); +new TestCase( SECTION, "parseFloat('0Xd')", 0, parseFloat("0Xd")); +new TestCase( SECTION, "parseFloat('0Xe')", 0, parseFloat("0Xe")); +new TestCase( SECTION, "parseFloat('0Xf')", 0, parseFloat("0Xf")); +new TestCase( SECTION, "parseFloat('0XA')", 0, parseFloat("0XA")); +new TestCase( SECTION, "parseFloat('0XB')", 0, parseFloat("0XB")); +new TestCase( SECTION, "parseFloat('0XC')", 0, parseFloat("0XC")); +new TestCase( SECTION, "parseFloat('0XD')", 0, parseFloat("0XD")); +new TestCase( SECTION, "parseFloat('0XE')", 0, parseFloat("0XE")); +new TestCase( SECTION, "parseFloat('0XF')", 0, parseFloat("0XF")); +new TestCase( SECTION, "parseFloat(' 0XF ')", 0, parseFloat(" 0XF ")); + +// hex literals should still succeed + +new TestCase( SECTION, "parseFloat(0x0)", 0, parseFloat(0x0)); +new TestCase( SECTION, "parseFloat(0x1)", 1, parseFloat(0x1)); +new TestCase( SECTION, "parseFloat(0x2)", 2, parseFloat(0x2)); +new TestCase( SECTION, "parseFloat(0x3)", 3, parseFloat(0x3)); +new TestCase( SECTION, "parseFloat(0x4)", 4, parseFloat(0x4)); +new TestCase( SECTION, "parseFloat(0x5)", 5, parseFloat(0x5)); +new TestCase( SECTION, "parseFloat(0x6)", 6, parseFloat(0x6)); +new TestCase( SECTION, "parseFloat(0x7)", 7, parseFloat(0x7)); +new TestCase( SECTION, "parseFloat(0x8)", 8, parseFloat(0x8)); +new TestCase( SECTION, "parseFloat(0x9)", 9, parseFloat(0x9)); +new TestCase( SECTION, "parseFloat(0xa)", 10, parseFloat(0xa)); +new TestCase( SECTION, "parseFloat(0xb)", 11, parseFloat(0xb)); +new TestCase( SECTION, "parseFloat(0xc)", 12, parseFloat(0xc)); +new TestCase( SECTION, "parseFloat(0xd)", 13, parseFloat(0xd)); +new TestCase( SECTION, "parseFloat(0xe)", 14, parseFloat(0xe)); +new TestCase( SECTION, "parseFloat(0xf)", 15, parseFloat(0xf)); +new TestCase( SECTION, "parseFloat(0xA)", 10, parseFloat(0xA)); +new TestCase( SECTION, "parseFloat(0xB)", 11, parseFloat(0xB)); +new TestCase( SECTION, "parseFloat(0xC)", 12, parseFloat(0xC)); +new TestCase( SECTION, "parseFloat(0xD)", 13, parseFloat(0xD)); +new TestCase( SECTION, "parseFloat(0xE)", 14, parseFloat(0xE)); +new TestCase( SECTION, "parseFloat(0xF)", 15, parseFloat(0xF)); + +new TestCase( SECTION, "parseFloat(0X0)", 0, parseFloat(0X0)); +new TestCase( SECTION, "parseFloat(0X1)", 1, parseFloat(0X1)); +new TestCase( SECTION, "parseFloat(0X2)", 2, parseFloat(0X2)); +new TestCase( SECTION, "parseFloat(0X3)", 3, parseFloat(0X3)); +new TestCase( SECTION, "parseFloat(0X4)", 4, parseFloat(0X4)); +new TestCase( SECTION, "parseFloat(0X5)", 5, parseFloat(0X5)); +new TestCase( SECTION, "parseFloat(0X6)", 6, parseFloat(0X6)); +new TestCase( SECTION, "parseFloat(0X7)", 7, parseFloat(0X7)); +new TestCase( SECTION, "parseFloat(0X8)", 8, parseFloat(0X8)); +new TestCase( SECTION, "parseFloat(0X9)", 9, parseFloat(0X9)); +new TestCase( SECTION, "parseFloat(0Xa)", 10, parseFloat(0Xa)); +new TestCase( SECTION, "parseFloat(0Xb)", 11, parseFloat(0Xb)); +new TestCase( SECTION, "parseFloat(0Xc)", 12, parseFloat(0Xc)); +new TestCase( SECTION, "parseFloat(0Xd)", 13, parseFloat(0Xd)); +new TestCase( SECTION, "parseFloat(0Xe)", 14, parseFloat(0Xe)); +new TestCase( SECTION, "parseFloat(0Xf)", 15, parseFloat(0Xf)); +new TestCase( SECTION, "parseFloat(0XA)", 10, parseFloat(0XA)); +new TestCase( SECTION, "parseFloat(0XB)", 11, parseFloat(0XB)); +new TestCase( SECTION, "parseFloat(0XC)", 12, parseFloat(0XC)); +new TestCase( SECTION, "parseFloat(0XD)", 13, parseFloat(0XD)); +new TestCase( SECTION, "parseFloat(0XE)", 14, parseFloat(0XE)); +new TestCase( SECTION, "parseFloat(0XF)", 15, parseFloat(0XF)); + + +// A StringNumericLiteral may not use octal notation + +new TestCase( SECTION, "parseFloat('00')", 0, parseFloat("00")); +new TestCase( SECTION, "parseFloat('01')", 1, parseFloat("01")); +new TestCase( SECTION, "parseFloat('02')", 2, parseFloat("02")); +new TestCase( SECTION, "parseFloat('03')", 3, parseFloat("03")); +new TestCase( SECTION, "parseFloat('04')", 4, parseFloat("04")); +new TestCase( SECTION, "parseFloat('05')", 5, parseFloat("05")); +new TestCase( SECTION, "parseFloat('06')", 6, parseFloat("06")); +new TestCase( SECTION, "parseFloat('07')", 7, parseFloat("07")); +new TestCase( SECTION, "parseFloat('010')", 10, parseFloat("010")); +new TestCase( SECTION, "parseFloat('011')", 11, parseFloat("011")); + +// A StringNumericLIteral may have any number of leading 0 digits + +new TestCase( SECTION, "parseFloat('001')", 1, parseFloat("001")); +new TestCase( SECTION, "parseFloat('0001')", 1, parseFloat("0001")); +new TestCase( SECTION, "parseFloat(' 0001 ')", 1, parseFloat(" 0001 ")); + +// an octal numeric literal should be treated as an octal + +new TestCase( SECTION, "parseFloat(00)", 0, parseFloat(00)); +new TestCase( SECTION, "parseFloat(01)", 1, parseFloat(01)); +new TestCase( SECTION, "parseFloat(02)", 2, parseFloat(02)); +new TestCase( SECTION, "parseFloat(03)", 3, parseFloat(03)); +new TestCase( SECTION, "parseFloat(04)", 4, parseFloat(04)); +new TestCase( SECTION, "parseFloat(05)", 5, parseFloat(05)); +new TestCase( SECTION, "parseFloat(06)", 6, parseFloat(06)); +new TestCase( SECTION, "parseFloat(07)", 7, parseFloat(07)); +new TestCase( SECTION, "parseFloat(010)", 8, parseFloat(010)); +new TestCase( SECTION, "parseFloat(011)", 9, parseFloat(011)); + +// A StringNumericLIteral may have any number of leading 0 digits + +new TestCase( SECTION, "parseFloat(001)", 1, parseFloat(001)); +new TestCase( SECTION, "parseFloat(0001)", 1, parseFloat(0001)); + +// make sure it's reflexive +new TestCase( SECTION, "parseFloat(Math.PI)", Math.PI, parseFloat(Math.PI)); +new TestCase( SECTION, "parseFloat(Math.LN2)", Math.LN2, parseFloat(Math.LN2)); +new TestCase( SECTION, "parseFloat(Math.LN10)", Math.LN10, parseFloat(Math.LN10)); +new TestCase( SECTION, "parseFloat(Math.LOG2E)", Math.LOG2E, parseFloat(Math.LOG2E)); +new TestCase( SECTION, "parseFloat(Math.LOG10E)", Math.LOG10E, parseFloat(Math.LOG10E)); +new TestCase( SECTION, "parseFloat(Math.SQRT2)", Math.SQRT2, parseFloat(Math.SQRT2)); +new TestCase( SECTION, "parseFloat(Math.SQRT1_2)", Math.SQRT1_2, parseFloat(Math.SQRT1_2)); + +new TestCase( SECTION, "parseFloat(Math.PI+'')", Math.PI, parseFloat(Math.PI+'')); +new TestCase( SECTION, "parseFloat(Math.LN2+'')", Math.LN2, parseFloat(Math.LN2+'')); +new TestCase( SECTION, "parseFloat(Math.LN10+'')", Math.LN10, parseFloat(Math.LN10+'')); +new TestCase( SECTION, "parseFloat(Math.LOG2E+'')", Math.LOG2E, parseFloat(Math.LOG2E+'')); +new TestCase( SECTION, "parseFloat(Math.LOG10E+'')", Math.LOG10E, parseFloat(Math.LOG10E+'')); +new TestCase( SECTION, "parseFloat(Math.SQRT2+'')", Math.SQRT2, parseFloat(Math.SQRT2+'')); +new TestCase( SECTION, "parseFloat(Math.SQRT1_2+'')", Math.SQRT1_2, parseFloat(Math.SQRT1_2+'')); + +test(); |