aboutsummaryrefslogtreecommitdiffstats
path: root/tests/auto/qml/parserstress/tests/ecma/TypeConversion/9.3.1-1.js
diff options
context:
space:
mode:
Diffstat (limited to 'tests/auto/qml/parserstress/tests/ecma/TypeConversion/9.3.1-1.js')
-rw-r--r--tests/auto/qml/parserstress/tests/ecma/TypeConversion/9.3.1-1.js323
1 files changed, 323 insertions, 0 deletions
diff --git a/tests/auto/qml/parserstress/tests/ecma/TypeConversion/9.3.1-1.js b/tests/auto/qml/parserstress/tests/ecma/TypeConversion/9.3.1-1.js
new file mode 100644
index 0000000000..da3e8794c0
--- /dev/null
+++ b/tests/auto/qml/parserstress/tests/ecma/TypeConversion/9.3.1-1.js
@@ -0,0 +1,323 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is Mozilla Communicator client code, released
+ * March 31, 1998.
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+gTestfile = '9.3.1-1.js';
+
+/**
+ File Name: 9.3.1-1.js
+ ECMA Section: 9.3 Type Conversion: ToNumber
+ Description: rules for converting an argument to a number.
+ see 9.3.1 for cases for converting strings to numbers.
+ special cases:
+ undefined NaN
+ Null NaN
+ Boolean 1 if true; +0 if false
+ Number the argument ( no conversion )
+ String see test 9.3.1
+ Object see test 9.3-1
+
+
+ This tests ToNumber applied to the string type
+
+ Author: christine@netscape.com
+ Date: 10 july 1997
+
+*/
+var SECTION = "9.3.1-1";
+var VERSION = "ECMA_1";
+var TITLE = "ToNumber applied to the String type";
+var BUGNUMBER="77391";
+
+startTest();
+
+writeHeaderToLog( SECTION + " "+ TITLE);
+
+
+// StringNumericLiteral:::StrWhiteSpace:::StrWhiteSpaceChar StrWhiteSpace:::
+//
+// Name Unicode Value Escape Sequence
+// <TAB> 0X0009 \t
+// <SP> 0X0020
+// <FF> 0X000C \f
+// <VT> 0X000B
+// <CR> 0X000D \r
+// <LF> 0X000A \n
+new TestCase( SECTION, "Number('')", 0, Number("") );
+new TestCase( SECTION, "Number(' ')", 0, Number(" ") );
+new TestCase( SECTION, "Number(\\t)", 0, Number("\t") );
+new TestCase( SECTION, "Number(\\n)", 0, Number("\n") );
+new TestCase( SECTION, "Number(\\r)", 0, Number("\r") );
+new TestCase( SECTION, "Number(\\f)", 0, Number("\f") );
+
+new TestCase( SECTION, "Number(String.fromCharCode(0x0009)", 0, Number(String.fromCharCode(0x0009)) );
+new TestCase( SECTION, "Number(String.fromCharCode(0x0020)", 0, Number(String.fromCharCode(0x0020)) );
+new TestCase( SECTION, "Number(String.fromCharCode(0x000C)", 0, Number(String.fromCharCode(0x000C)) );
+new TestCase( SECTION, "Number(String.fromCharCode(0x000B)", 0, Number(String.fromCharCode(0x000B)) );
+new TestCase( SECTION, "Number(String.fromCharCode(0x000D)", 0, Number(String.fromCharCode(0x000D)) );
+new TestCase( SECTION, "Number(String.fromCharCode(0x000A)", 0, Number(String.fromCharCode(0x000A)) );
+
+// a StringNumericLiteral may be preceeded or followed by whitespace and/or
+// line terminators
+
+new TestCase( SECTION, "Number( ' ' + 999 )", 999, Number( ' '+999) );
+new TestCase( SECTION, "Number( '\\n' + 999 )", 999, Number( '\n' +999) );
+new TestCase( SECTION, "Number( '\\r' + 999 )", 999, Number( '\r' +999) );
+new TestCase( SECTION, "Number( '\\t' + 999 )", 999, Number( '\t' +999) );
+new TestCase( SECTION, "Number( '\\f' + 999 )", 999, Number( '\f' +999) );
+
+new TestCase( SECTION, "Number( 999 + ' ' )", 999, Number( 999+' ') );
+new TestCase( SECTION, "Number( 999 + '\\n' )", 999, Number( 999+'\n' ) );
+new TestCase( SECTION, "Number( 999 + '\\r' )", 999, Number( 999+'\r' ) );
+new TestCase( SECTION, "Number( 999 + '\\t' )", 999, Number( 999+'\t' ) );
+new TestCase( SECTION, "Number( 999 + '\\f' )", 999, Number( 999+'\f' ) );
+
+new TestCase( SECTION, "Number( '\\n' + 999 + '\\n' )", 999, Number( '\n' +999+'\n' ) );
+new TestCase( SECTION, "Number( '\\r' + 999 + '\\r' )", 999, Number( '\r' +999+'\r' ) );
+new TestCase( SECTION, "Number( '\\t' + 999 + '\\t' )", 999, Number( '\t' +999+'\t' ) );
+new TestCase( SECTION, "Number( '\\f' + 999 + '\\f' )", 999, Number( '\f' +999+'\f' ) );
+
+new TestCase( SECTION, "Number( ' ' + '999' )", 999, Number( ' '+'999') );
+new TestCase( SECTION, "Number( '\\n' + '999' )", 999, Number( '\n' +'999') );
+new TestCase( SECTION, "Number( '\\r' + '999' )", 999, Number( '\r' +'999') );
+new TestCase( SECTION, "Number( '\\t' + '999' )", 999, Number( '\t' +'999') );
+new TestCase( SECTION, "Number( '\\f' + '999' )", 999, Number( '\f' +'999') );
+
+new TestCase( SECTION, "Number( '999' + ' ' )", 999, Number( '999'+' ') );
+new TestCase( SECTION, "Number( '999' + '\\n' )", 999, Number( '999'+'\n' ) );
+new TestCase( SECTION, "Number( '999' + '\\r' )", 999, Number( '999'+'\r' ) );
+new TestCase( SECTION, "Number( '999' + '\\t' )", 999, Number( '999'+'\t' ) );
+new TestCase( SECTION, "Number( '999' + '\\f' )", 999, Number( '999'+'\f' ) );
+
+new TestCase( SECTION, "Number( '\\n' + '999' + '\\n' )", 999, Number( '\n' +'999'+'\n' ) );
+new TestCase( SECTION, "Number( '\\r' + '999' + '\\r' )", 999, Number( '\r' +'999'+'\r' ) );
+new TestCase( SECTION, "Number( '\\t' + '999' + '\\t' )", 999, Number( '\t' +'999'+'\t' ) );
+new TestCase( SECTION, "Number( '\\f' + '999' + '\\f' )", 999, Number( '\f' +'999'+'\f' ) );
+
+new TestCase( SECTION, "Number( String.fromCharCode(0x0009) + '99' )", 99, Number( String.fromCharCode(0x0009) + '99' ) );
+new TestCase( SECTION, "Number( String.fromCharCode(0x0020) + '99' )", 99, Number( String.fromCharCode(0x0020) + '99' ) );
+new TestCase( SECTION, "Number( String.fromCharCode(0x000C) + '99' )", 99, Number( String.fromCharCode(0x000C) + '99' ) );
+new TestCase( SECTION, "Number( String.fromCharCode(0x000B) + '99' )", 99, Number( String.fromCharCode(0x000B) + '99' ) );
+new TestCase( SECTION, "Number( String.fromCharCode(0x000D) + '99' )", 99, Number( String.fromCharCode(0x000D) + '99' ) );
+new TestCase( SECTION, "Number( String.fromCharCode(0x000A) + '99' )", 99, Number( String.fromCharCode(0x000A) + '99' ) );
+
+new TestCase( SECTION, "Number( String.fromCharCode(0x0009) + '99' + String.fromCharCode(0x0009)", 99, Number( String.fromCharCode(0x0009) + '99' + String.fromCharCode(0x0009)) );
+new TestCase( SECTION, "Number( String.fromCharCode(0x0020) + '99' + String.fromCharCode(0x0020)", 99, Number( String.fromCharCode(0x0009) + '99' + String.fromCharCode(0x0020)) );
+new TestCase( SECTION, "Number( String.fromCharCode(0x000C) + '99' + String.fromCharCode(0x000C)", 99, Number( String.fromCharCode(0x0009) + '99' + String.fromCharCode(0x000C)) );
+new TestCase( SECTION, "Number( String.fromCharCode(0x000D) + '99' + String.fromCharCode(0x000D)", 99, Number( String.fromCharCode(0x0009) + '99' + String.fromCharCode(0x000D)) );
+new TestCase( SECTION, "Number( String.fromCharCode(0x000B) + '99' + String.fromCharCode(0x000B)", 99, Number( String.fromCharCode(0x0009) + '99' + String.fromCharCode(0x000B)) );
+new TestCase( SECTION, "Number( String.fromCharCode(0x000A) + '99' + String.fromCharCode(0x000A)", 99, Number( String.fromCharCode(0x0009) + '99' + String.fromCharCode(0x000A)) );
+
+new TestCase( SECTION, "Number( '99' + String.fromCharCode(0x0009)", 99, Number( '99' + String.fromCharCode(0x0009)) );
+new TestCase( SECTION, "Number( '99' + String.fromCharCode(0x0020)", 99, Number( '99' + String.fromCharCode(0x0020)) );
+new TestCase( SECTION, "Number( '99' + String.fromCharCode(0x000C)", 99, Number( '99' + String.fromCharCode(0x000C)) );
+new TestCase( SECTION, "Number( '99' + String.fromCharCode(0x000D)", 99, Number( '99' + String.fromCharCode(0x000D)) );
+new TestCase( SECTION, "Number( '99' + String.fromCharCode(0x000B)", 99, Number( '99' + String.fromCharCode(0x000B)) );
+new TestCase( SECTION, "Number( '99' + String.fromCharCode(0x000A)", 99, Number( '99' + String.fromCharCode(0x000A)) );
+
+new TestCase( SECTION, "Number( String.fromCharCode(0x0009) + 99 )", 99, Number( String.fromCharCode(0x0009) + 99 ) );
+new TestCase( SECTION, "Number( String.fromCharCode(0x0020) + 99 )", 99, Number( String.fromCharCode(0x0020) + 99 ) );
+new TestCase( SECTION, "Number( String.fromCharCode(0x000C) + 99 )", 99, Number( String.fromCharCode(0x000C) + 99 ) );
+new TestCase( SECTION, "Number( String.fromCharCode(0x000B) + 99 )", 99, Number( String.fromCharCode(0x000B) + 99 ) );
+new TestCase( SECTION, "Number( String.fromCharCode(0x000D) + 99 )", 99, Number( String.fromCharCode(0x000D) + 99 ) );
+new TestCase( SECTION, "Number( String.fromCharCode(0x000A) + 99 )", 99, Number( String.fromCharCode(0x000A) + 99 ) );
+
+new TestCase( SECTION, "Number( String.fromCharCode(0x0009) + 99 + String.fromCharCode(0x0009)", 99, Number( String.fromCharCode(0x0009) + 99 + String.fromCharCode(0x0009)) );
+new TestCase( SECTION, "Number( String.fromCharCode(0x0020) + 99 + String.fromCharCode(0x0020)", 99, Number( String.fromCharCode(0x0009) + 99 + String.fromCharCode(0x0020)) );
+new TestCase( SECTION, "Number( String.fromCharCode(0x000C) + 99 + String.fromCharCode(0x000C)", 99, Number( String.fromCharCode(0x0009) + 99 + String.fromCharCode(0x000C)) );
+new TestCase( SECTION, "Number( String.fromCharCode(0x000D) + 99 + String.fromCharCode(0x000D)", 99, Number( String.fromCharCode(0x0009) + 99 + String.fromCharCode(0x000D)) );
+new TestCase( SECTION, "Number( String.fromCharCode(0x000B) + 99 + String.fromCharCode(0x000B)", 99, Number( String.fromCharCode(0x0009) + 99 + String.fromCharCode(0x000B)) );
+new TestCase( SECTION, "Number( String.fromCharCode(0x000A) + 99 + String.fromCharCode(0x000A)", 99, Number( String.fromCharCode(0x0009) + 99 + String.fromCharCode(0x000A)) );
+
+new TestCase( SECTION, "Number( 99 + String.fromCharCode(0x0009)", 99, Number( 99 + String.fromCharCode(0x0009)) );
+new TestCase( SECTION, "Number( 99 + String.fromCharCode(0x0020)", 99, Number( 99 + String.fromCharCode(0x0020)) );
+new TestCase( SECTION, "Number( 99 + String.fromCharCode(0x000C)", 99, Number( 99 + String.fromCharCode(0x000C)) );
+new TestCase( SECTION, "Number( 99 + String.fromCharCode(0x000D)", 99, Number( 99 + String.fromCharCode(0x000D)) );
+new TestCase( SECTION, "Number( 99 + String.fromCharCode(0x000B)", 99, Number( 99 + String.fromCharCode(0x000B)) );
+new TestCase( SECTION, "Number( 99 + String.fromCharCode(0x000A)", 99, Number( 99 + String.fromCharCode(0x000A)) );
+
+
+// StrNumericLiteral:::StrDecimalLiteral:::Infinity
+
+new TestCase( SECTION, "Number('Infinity')", Math.pow(10,10000), Number("Infinity") );
+new TestCase( SECTION, "Number('-Infinity')", -Math.pow(10,10000), Number("-Infinity") );
+new TestCase( SECTION, "Number('+Infinity')", Math.pow(10,10000), Number("+Infinity") );
+
+// StrNumericLiteral::: StrDecimalLiteral ::: DecimalDigits . DecimalDigits opt ExponentPart opt
+
+new TestCase( SECTION, "Number('0')", 0, Number("0") );
+new TestCase( SECTION, "Number('-0')", -0, Number("-0") );
+new TestCase( SECTION, "Number('+0')", 0, Number("+0") );
+
+new TestCase( SECTION, "Number('1')", 1, Number("1") );
+new TestCase( SECTION, "Number('-1')", -1, Number("-1") );
+new TestCase( SECTION, "Number('+1')", 1, Number("+1") );
+
+new TestCase( SECTION, "Number('2')", 2, Number("2") );
+new TestCase( SECTION, "Number('-2')", -2, Number("-2") );
+new TestCase( SECTION, "Number('+2')", 2, Number("+2") );
+
+new TestCase( SECTION, "Number('3')", 3, Number("3") );
+new TestCase( SECTION, "Number('-3')", -3, Number("-3") );
+new TestCase( SECTION, "Number('+3')", 3, Number("+3") );
+
+new TestCase( SECTION, "Number('4')", 4, Number("4") );
+new TestCase( SECTION, "Number('-4')", -4, Number("-4") );
+new TestCase( SECTION, "Number('+4')", 4, Number("+4") );
+
+new TestCase( SECTION, "Number('5')", 5, Number("5") );
+new TestCase( SECTION, "Number('-5')", -5, Number("-5") );
+new TestCase( SECTION, "Number('+5')", 5, Number("+5") );
+
+new TestCase( SECTION, "Number('6')", 6, Number("6") );
+new TestCase( SECTION, "Number('-6')", -6, Number("-6") );
+new TestCase( SECTION, "Number('+6')", 6, Number("+6") );
+
+new TestCase( SECTION, "Number('7')", 7, Number("7") );
+new TestCase( SECTION, "Number('-7')", -7, Number("-7") );
+new TestCase( SECTION, "Number('+7')", 7, Number("+7") );
+
+new TestCase( SECTION, "Number('8')", 8, Number("8") );
+new TestCase( SECTION, "Number('-8')", -8, Number("-8") );
+new TestCase( SECTION, "Number('+8')", 8, Number("+8") );
+
+new TestCase( SECTION, "Number('9')", 9, Number("9") );
+new TestCase( SECTION, "Number('-9')", -9, Number("-9") );
+new TestCase( SECTION, "Number('+9')", 9, Number("+9") );
+
+new TestCase( SECTION, "Number('3.14159')", 3.14159, Number("3.14159") );
+new TestCase( SECTION, "Number('-3.14159')", -3.14159, Number("-3.14159") );
+new TestCase( SECTION, "Number('+3.14159')", 3.14159, Number("+3.14159") );
+
+new TestCase( SECTION, "Number('3.')", 3, Number("3.") );
+new TestCase( SECTION, "Number('-3.')", -3, Number("-3.") );
+new TestCase( SECTION, "Number('+3.')", 3, Number("+3.") );
+
+new TestCase( SECTION, "Number('3.e1')", 30, Number("3.e1") );
+new TestCase( SECTION, "Number('-3.e1')", -30, Number("-3.e1") );
+new TestCase( SECTION, "Number('+3.e1')", 30, Number("+3.e1") );
+
+new TestCase( SECTION, "Number('3.e+1')", 30, Number("3.e+1") );
+new TestCase( SECTION, "Number('-3.e+1')", -30, Number("-3.e+1") );
+new TestCase( SECTION, "Number('+3.e+1')", 30, Number("+3.e+1") );
+
+new TestCase( SECTION, "Number('3.e-1')", .30, Number("3.e-1") );
+new TestCase( SECTION, "Number('-3.e-1')", -.30, Number("-3.e-1") );
+new TestCase( SECTION, "Number('+3.e-1')", .30, Number("+3.e-1") );
+
+// StrDecimalLiteral::: .DecimalDigits ExponentPart opt
+
+new TestCase( SECTION, "Number('.00001')", 0.00001, Number(".00001") );
+new TestCase( SECTION, "Number('+.00001')", 0.00001, Number("+.00001") );
+new TestCase( SECTION, "Number('-0.0001')", -0.00001, Number("-.00001") );
+
+new TestCase( SECTION, "Number('.01e2')", 1, Number(".01e2") );
+new TestCase( SECTION, "Number('+.01e2')", 1, Number("+.01e2") );
+new TestCase( SECTION, "Number('-.01e2')", -1, Number("-.01e2") );
+
+new TestCase( SECTION, "Number('.01e+2')", 1, Number(".01e+2") );
+new TestCase( SECTION, "Number('+.01e+2')", 1, Number("+.01e+2") );
+new TestCase( SECTION, "Number('-.01e+2')", -1, Number("-.01e+2") );
+
+new TestCase( SECTION, "Number('.01e-2')", 0.0001, Number(".01e-2") );
+new TestCase( SECTION, "Number('+.01e-2')", 0.0001, Number("+.01e-2") );
+new TestCase( SECTION, "Number('-.01e-2')", -0.0001, Number("-.01e-2") );
+
+// StrDecimalLiteral::: DecimalDigits ExponentPart opt
+
+new TestCase( SECTION, "Number('1234e5')", 123400000, Number("1234e5") );
+new TestCase( SECTION, "Number('+1234e5')", 123400000, Number("+1234e5") );
+new TestCase( SECTION, "Number('-1234e5')", -123400000, Number("-1234e5") );
+
+new TestCase( SECTION, "Number('1234e+5')", 123400000, Number("1234e+5") );
+new TestCase( SECTION, "Number('+1234e+5')", 123400000, Number("+1234e+5") );
+new TestCase( SECTION, "Number('-1234e+5')", -123400000, Number("-1234e+5") );
+
+new TestCase( SECTION, "Number('1234e-5')", 0.01234, Number("1234e-5") );
+new TestCase( SECTION, "Number('+1234e-5')", 0.01234, Number("+1234e-5") );
+new TestCase( SECTION, "Number('-1234e-5')", -0.01234, Number("-1234e-5") );
+
+// StrNumericLiteral::: HexIntegerLiteral
+
+new TestCase( SECTION, "Number('0x0')", 0, Number("0x0"));
+new TestCase( SECTION, "Number('0x1')", 1, Number("0x1"));
+new TestCase( SECTION, "Number('0x2')", 2, Number("0x2"));
+new TestCase( SECTION, "Number('0x3')", 3, Number("0x3"));
+new TestCase( SECTION, "Number('0x4')", 4, Number("0x4"));
+new TestCase( SECTION, "Number('0x5')", 5, Number("0x5"));
+new TestCase( SECTION, "Number('0x6')", 6, Number("0x6"));
+new TestCase( SECTION, "Number('0x7')", 7, Number("0x7"));
+new TestCase( SECTION, "Number('0x8')", 8, Number("0x8"));
+new TestCase( SECTION, "Number('0x9')", 9, Number("0x9"));
+new TestCase( SECTION, "Number('0xa')", 10, Number("0xa"));
+new TestCase( SECTION, "Number('0xb')", 11, Number("0xb"));
+new TestCase( SECTION, "Number('0xc')", 12, Number("0xc"));
+new TestCase( SECTION, "Number('0xd')", 13, Number("0xd"));
+new TestCase( SECTION, "Number('0xe')", 14, Number("0xe"));
+new TestCase( SECTION, "Number('0xf')", 15, Number("0xf"));
+new TestCase( SECTION, "Number('0xA')", 10, Number("0xA"));
+new TestCase( SECTION, "Number('0xB')", 11, Number("0xB"));
+new TestCase( SECTION, "Number('0xC')", 12, Number("0xC"));
+new TestCase( SECTION, "Number('0xD')", 13, Number("0xD"));
+new TestCase( SECTION, "Number('0xE')", 14, Number("0xE"));
+new TestCase( SECTION, "Number('0xF')", 15, Number("0xF"));
+
+new TestCase( SECTION, "Number('0X0')", 0, Number("0X0"));
+new TestCase( SECTION, "Number('0X1')", 1, Number("0X1"));
+new TestCase( SECTION, "Number('0X2')", 2, Number("0X2"));
+new TestCase( SECTION, "Number('0X3')", 3, Number("0X3"));
+new TestCase( SECTION, "Number('0X4')", 4, Number("0X4"));
+new TestCase( SECTION, "Number('0X5')", 5, Number("0X5"));
+new TestCase( SECTION, "Number('0X6')", 6, Number("0X6"));
+new TestCase( SECTION, "Number('0X7')", 7, Number("0X7"));
+new TestCase( SECTION, "Number('0X8')", 8, Number("0X8"));
+new TestCase( SECTION, "Number('0X9')", 9, Number("0X9"));
+new TestCase( SECTION, "Number('0Xa')", 10, Number("0Xa"));
+new TestCase( SECTION, "Number('0Xb')", 11, Number("0Xb"));
+new TestCase( SECTION, "Number('0Xc')", 12, Number("0Xc"));
+new TestCase( SECTION, "Number('0Xd')", 13, Number("0Xd"));
+new TestCase( SECTION, "Number('0Xe')", 14, Number("0Xe"));
+new TestCase( SECTION, "Number('0Xf')", 15, Number("0Xf"));
+new TestCase( SECTION, "Number('0XA')", 10, Number("0XA"));
+new TestCase( SECTION, "Number('0XB')", 11, Number("0XB"));
+new TestCase( SECTION, "Number('0XC')", 12, Number("0XC"));
+new TestCase( SECTION, "Number('0XD')", 13, Number("0XD"));
+new TestCase( SECTION, "Number('0XE')", 14, Number("0XE"));
+new TestCase( SECTION, "Number('0XF')", 15, Number("0XF"));
+
+test();
+
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-01 02:43:03 +0000