1 files changed, 276 insertions, 0 deletions
diff --git a/tests/auto/qml/parserstress/tests/ecma_3/Unicode/uc-005.js b/tests/auto/qml/parserstress/tests/ecma_3/Unicode/uc-005.js
new file mode 100644
index 0000000000..3727042046
--- /dev/null
+++ b/tests/auto/qml/parserstress/tests/ecma_3/Unicode/uc-005.js
@@ -0,0 +1,276 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is JavaScript Engine testing utilities.
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corp.
+ * Portions created by the Initial Developer are Copyright (C) 2002
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *   rogerl@netscape.com, pschwartau@netscape.com
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+/*
+ *
+ * Date:    15 July 2002
+ * SUMMARY: Testing identifiers with double-byte names
+ * See http://bugzilla.mozilla.org/show_bug.cgi?id=58274
+ *
+ * Here is a sample of the problem:
+ *
+ *    js> function f\u02B1 () {}
+ *
+ *    js> f\u02B1.toSource();
+ *    function f¦() {}
+ *
+ *    js> f\u02B1.toSource().toSource();
+ *    (new String("function f\xB1() {}"))
+ *
+ *
+ * See how the high-byte information (the 02) has been lost?
+ * The same thing was happening with the toString() method:
+ *
+ *    js> f\u02B1.toString();
+ *
+ *    function f¦() {
+ *    }
+ *
+ *    js> f\u02B1.toString().toSource();
+ *    (new String("\nfunction f\xB1() {\n}\n"))
+ *
+ */
+//-----------------------------------------------------------------------------
+var gTestfile = 'uc-005.js';
+var UBound = 0;
+var BUGNUMBER = 58274;
+var summary = 'Testing identifiers with double-byte names';
+var status = '';
+var statusitems = [];
+var actual = '';
+var actualvalues = [];
+var expect= '';
+var expectedvalues = [];
+
+
+/*
+ * Define a function that uses double-byte identifiers in
+ * "every possible way"
+ *
+ * Then recover each double-byte identifier via f.toString().
+ * To make this easier, put a 'Z' token before every one.
+ *
+ * Our eval string will be:
+ *
+ * sEval = "function Z\u02b1(Z\u02b2, b) {
+ *          try { Z\u02b3 : var Z\u02b4 = Z\u02b1; }
+ *          catch (Z\u02b5) { for (var Z\u02b6 in Z\u02b5)
+ *          {for (1; 1<0; Z\u02b7++) {new Array()[Z\u02b6] = 1;} };} }";
+ *
+ * It will be helpful to build this string in stages:
+ */
+var s0 =  'function Z';
+var s1 =  '\u02b1(Z';
+var s2 =  '\u02b2, b) {try { Z';
+var s3 =  '\u02b3 : var Z';
+var s4 =  '\u02b4 = Z';
+var s5 =  '\u02b1; } catch (Z'
+  var s6 =  '\u02b5) { for (var Z';
+var s7 =  '\u02b6 in Z';
+var s8 =  '\u02b5){for (1; 1<0; Z';
+var s9 =  '\u02b7++) {new Array()[Z';
+var s10 = '\u02b6] = 1;} };} }';
+
+
+/*
+ * Concatenate these and eval() to create the function Z\u02b1
+ */
+var sEval = s0 + s1 + s2 + s3 + s4 + s5 + s6 + s7 + s8 + s9 + s10;
+eval(sEval);
+
+
+/*
+ * Recover all the double-byte identifiers via Z\u02b1.toString().
+ * We'll recover the 1st one as arrID[1], the 2nd one as arrID[2],
+ * and so on ...
+ */
+var arrID = getIdentifiers(Z\u02b1);
+
+
+/*
+ * Now check that we got back what we put in -
+ */
+status = inSection(1);
+actual = arrID[1];
+expect = s1.charAt(0);
+addThis();
+
+status = inSection(2);
+actual = arrID[2];
+expect = s2.charAt(0);
+addThis();
+
+status = inSection(3);
+actual = arrID[3];
+expect = s3.charAt(0);
+addThis();
+
+status = inSection(4);
+actual = arrID[4];
+expect = s4.charAt(0);
+addThis();
+
+status = inSection(5);
+actual = arrID[5];
+expect = s5.charAt(0);
+addThis();
+
+status = inSection(6);
+actual = arrID[6];
+expect = s6.charAt(0);
+addThis();
+
+status = inSection(7);
+actual = arrID[7];
+expect = s7.charAt(0);
+addThis();
+
+status = inSection(8);
+actual = arrID[8];
+expect = s8.charAt(0);
+addThis();
+
+status = inSection(9);
+actual = arrID[9];
+expect = s9.charAt(0);
+addThis();
+
+status = inSection(10);
+actual = arrID[10];
+expect = s10.charAt(0);
+addThis();
+
+
+
+
+//-----------------------------------------------------------------------------
+test();
+//-----------------------------------------------------------------------------
+
+
+
+/*
+ * Goal: recover the double-byte identifiers from f.toString()
+ * by getting the very next character after each 'Z' token.
+ *
+ * The return value will be an array |arr| indexed such that
+ * |arr[1]| is the 1st identifier, |arr[2]| the 2nd, and so on.
+ *
+ * Note, however, f.toString() is implementation-independent.
+ * For example, it may begin with '\nfunction' instead of 'function'.
+ *
+ * Rhino uses a Unicode representation for f.toString(); whereas
+ * SpiderMonkey uses an ASCII representation, putting escape sequences
+ * for non-ASCII characters. For example, if a function is called f\u02B1,
+ * then in Rhino the toString() method will present a 2-character Unicode
+ * string for its name, whereas SpiderMonkey will present a 7-character
+ * ASCII string for its name: the string literal 'f\u02B1'.
+ *
+ * So we force the lexer to condense the string before we use it.
+ * This will give uniform results in Rhino and SpiderMonkey.
+ */
+function getIdentifiers(f)
+{
+  var str = condenseStr(f.toString());
+  var arr = str.split('Z');
+
+  /*
+   * The identifiers are the 1st char of each split substring
+   * EXCEPT the first one, which is just ('\n' +) 'function '.
+   *
+   * Thus note the 1st identifier will be stored in |arr[1]|,
+   * the 2nd one in |arr[2]|, etc., making the indexing easy -
+   */
+  for (i in arr)
+    arr[i] = arr[i].charAt(0);
+  return arr;
+}
+
+
+/*
+ * This function is the opposite of a functions like escape(), which take
+ * Unicode characters and return escape sequences for them. Here, we force
+ * the lexer to turn escape sequences back into single characters.
+ *
+ * Note we can't simply do |eval(str)|, since in practice |str| will be an
+ * identifier somewhere in the program (e.g. a function name); thus |eval(str)|
+ * would return the object that the identifier represents: not what we want.
+ *
+ * So we surround |str| lexicographically with quotes to force the lexer to
+ * evaluate it as a string. Have to strip out any linefeeds first, however -
+ */
+function condenseStr(str)
+{
+  /*
+   * You won't be able to do the next step if |str| has
+   * any carriage returns or linefeeds in it. For example:
+   *
+   *  js> eval("'" + '\nHello' + "'");
+   *  1: SyntaxError: unterminated string literal:
+   *  1: '
+   *  1: ^
+   *
+   * So replace them with the empty string -
+   */
+  str = str.replace(/[\r\n]/g, '')
+    return eval("'" + str + "'")
+    }
+
+
+function addThis()
+{
+  statusitems[UBound] = status;
+  actualvalues[UBound] = actual;
+  expectedvalues[UBound] = expect;
+  UBound++;
+}
+
+
+function test()
+{
+  enterFunc('test');
+  printBugNumber(BUGNUMBER);
+  printStatus(summary);
+
+  for (var i=0; i<UBound; i++)
+  {
+    reportCompare(expectedvalues[i], actualvalues[i], statusitems[i]);
+  }
+
+  exitFunc ('test');
+}