| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We cannot use reinterpret_cast here, because testUnit->constants()
returns a pointer to quint64_le data, which needs to be converted to
native endianness first.
Here I used the QV4::Value converter that accepts quint64, so this
conversion now happens implicitly.
Change-Id: Iff6e3e4554af8890e61cb06e6fd79339c7a14653
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
(cherry picked from commit dab0d62b655ce9a476993de2558a573a5066288c)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
|
|
|
|
|
|
|
|
|
| |
Remove all qmake project files, except for examples which are used to
test that qmake continues to work.
Change-Id: Ic4abb72dc2dcd75df7a797c56056b6b3c5fe62ac
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
| |
If we load the same file multiple times, we can re-use the old mapping.
In fact we may leak memory if we don't. The fact that we have to use a
mutex here is somewhat regrettable, but I haven't found a better way
of serializing access.
Task-number: QTBUG-89659
Pick-to: 5.15
Change-Id: Iaa44ac80faa5e95f30c05e950ab35083a8b0416b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
|
|
|
|
|
|
|
|
| |
Modify special case locations to use the new API as well.
Task-number: QTBUG-86815
Change-Id: I3b964e3baf0cc7040830156dac30358ea1152801
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
|
|
|
|
|
|
|
| |
Change-Id: I48d7fd306f3d1b161a8e73029282ee591b1ef612
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
|
|\
| |
| |
| | |
Change-Id: I0c5b939c70bdb91ccdf7068784308416dcaa5736
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Apparently some machines on the CI take north of 10s to compile a
component.
Change-Id: Ia01c55c0f248e061bea8a3bc194c65e4e5f663b5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
| |
| |
| |
| |
| |
| | |
Change-Id: Ie0db35f674137c229eaf049616f38f8e818f7092
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
| |
| |
| |
| |
| |
| | |
Change-Id: I67a6c8f1659e7b471a4fcb92a2699292cf4eea81
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
|\|
| |
| |
| | |
Change-Id: I4a91928610f79c8e21a05781953ffa41508c828a
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
We rely on the qmlimportscanner to find out what to deploy, but it is
limited to scanning .qml files. These tests creates the QML code from C++,
so qmlimportscanner fails to detect those dependencies.
Therefore, we add a dummy_imports.qml file that has the sole purpose of
giving qmlimportscanner which additional dependencies the test has.
Change-Id: I4237b738e408c309b9b21de7e53d1a4e4acb7e2e
Task-number: QTBUG-73512
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
|
|/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
All tests compile and run on a developer build.
These tests are failing:
tst_qqmlsqldatabase Fails due to missing sql driver
tst_qqmlsqldatabase Fails in wip/qt6
tst_ququicklayouts Fails in wip/qt6
tst_flickableinterop Fails in wip/qt6
tst_qquickpinchandler Fails in wip/qt6
tst_qquickflickable Fails in wip/qt6
tst_qquickgridview Fails in wip/qt6
tst_qquickimage Fails due to missing jpeg plugin
tst_qquicklistview Fails in wip/qt6
tst_qquicktext Fails in wip/qt6
tst_qquickcanvasitem Fails in wip/qt6
tst_scenegraph Fails due to missing jpeg plugin
tst_TestFiltering Fails in wip/qt6
Change-Id: I4b9d69c118e23c095cb72ad5a67653fc30943bb1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
|
|
|
|
|
|
|
| |
No one can read this mess.
Change-Id: Icec4f2afc466435c1ae5e4e80fa2c1b5baf7d087
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Libraries:
scenegraph/util/qsgdepthstencilbuffer.cpp:186:57: warning: 'T* QWeakPointer<T>::data() const [with T = QSGDepthStencilBuffer]' is deprecated: Use toStrongRef() instead, and data() on the returned QSharedPointer [-Wdeprecated-declarations]
scenegraph/qsgdefaultcontext.cpp:163:89: warning: 'QList<T> QSet<T>::toList() const [with T = QByteArray]' is deprecated: Use values() instead. [-Wdeprecated-declarations]
util/qquickpath.cpp:573:40: warning: 'QList<T> QSet<T>::toList() const [with T = QString]' is deprecated: Use values() instead. [-Wdeprecated-declarations]
util/qquickpath.cpp:606:29: warning: 'QList<T> QSet<T>::toList() const [with T = QString]' is deprecated: Use values() instead. [-Wdeprecated-declarations]
quicktest.cpp:562:73: warning: 'QSet<T> QList<T>::toSet() const [with T = QString]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
quicktest.cpp:604:77: warning: 'QSet<T> QList<T>::toSet() const [with T = QString]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
qquickitemparticle.cpp:233:49: warning: 'static QSet<T> QSet<T>::fromList(const QList<T>&) [with T = QQuickItem*]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
qquickitemparticle.cpp:239:37: warning: 'QList<T> QSet<T>::toList() const [with T = QQuickItem*]' is deprecated: Use values() instead. [-Wdeprecated-declarations]
Tests:
tst_propertyrequirements.cpp:123:58: warning: 'QList<T> QSet<T>::toList() const [with T = QString]' is deprecated: Use values() instead. [-Wdeprecated-declarations]
tst_propertyrequirements.cpp:161:40: warning: 'static QSet<T> QSet<T>::fromList(const QList<T>&) [with T = QString]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
tst_propertyrequirements.cpp:161:77: warning: 'static QSet<T> QSet<T>::fromList(const QList<T>&) [with T = QString]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
/data1/frkleint/qt-dev/qtbase/include/QtCore/../../src/corelib/tools/qset.h:400:23: warning: 'QSet<T> QList<T>::toSet() const [with T = QString]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
../shared/viewtestutil.cpp:331:26: warning: 'QSet<T> QList<T>::toSet() const [with T = int]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
...
tst_qmldiskcache.cpp:651:81: warning: 'QSet<T> QList<T>::toSet() const [with T = QString]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
tst_qmldiskcache.cpp:663:81: warning: 'QSet<T> QList<T>::toSet() const [with T = QString]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
tst_qmldiskcache.cpp:693:85: warning: 'QSet<T> QList<T>::toSet() const [with T = QString]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
tst_qmldiskcache.cpp:918:81: warning: 'QSet<T> QList<T>::toSet() const [with T = QString]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
tst_qmldiskcache.cpp:940:69: warning: 'QSet<T> QList<T>::toSet() const [with T = QString]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
tst_qquickgridview.cpp:6437:70: warning: 'QSet<T> QList<T>::toSet() const [with T = int]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
tst_qquickgridview.cpp:6438:46: warning: 'QSet<T> QList<T>::toSet() const [with T = int]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
tst_qquickgridview.cpp:6440:66: warning: 'QSet<T> QList<T>::toSet() const [with T = int]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
tst_qquicktableview.cpp:53:20: warning: 'kTableViewPropName' defined but not used [-Wunused-variable]
tst_qquicklistview.cpp:7269:70: warning: 'QSet<T> QList<T>::toSet() const [with T = int]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
tst_qquicklistview.cpp:7270:46: warning: 'QSet<T> QList<T>::toSet() const [with T = int]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
tst_qquicklistview.cpp:7272:66: warning: 'QSet<T> QList<T>::toSet() const [with T = int]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
tst_qquickpositioners.cpp:4033:70: warning: 'QSet<T> QList<T>::toSet() const [with T = int]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
tst_qquickpositioners.cpp:4034:46: warning: 'QSet<T> QList<T>::toSet() const [with T = int]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
tst_qquickpositioners.cpp:4036:66: warning: 'QSet<T> QList<T>::toSet() const [with T = int]' is deprecated: Use QSet<T>(list.begin(), list.end()) instead. [-Wdeprecated-declarations]
Change-Id: I9a177f83f07ae5162f7cc231a8c164ba32ffa5bc
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
|
|
|
|
|
|
|
|
|
|
| |
This reduces our dependence on QV4::Value in the devtools.
Change-Id: I4b3f937bc08c16f7e2543fdc5cc34c0cfb121f8f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
|
|
|
|
|
|
|
| |
We need a CompilationUnit that only holds the data needed for
compilation and another one that is executable by the runtime.
Change-Id: I704d859ba028576a18460f5e3a59f210f64535d3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
|
|
|
|
| |
Change-Id: Ic135a863581d29a3afb9c6c7f070d2630b3913b4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|
|
|
|
|
|
|
|
| |
Rewrite the tests to not try to delete the cache, but operate
on sets of newly created files.
Task-number: QTBUG-70609
Change-Id: I63135794e2c52048da12977e5c40c0bcce5a24b1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Two minor fixes needed for this otherwise straight-forward change:
(1) When compiling modules, use the full url for the source file of
the compilation unit, as that's what we use for the relocation check
when loading the cache file.
(2) Record the proper source time stamp for cache invalidation.
As a bonus, when importing scripts from .qml files, we now also attempt
to use the cached version that we created on the fly in an effort to
replace heap memory with mmap backed memory - just like we do for .qml
files.
Change-Id: I5b03a18e3c44d537c3242cb1d969636df32fe42a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Separate the qml data (objects/imports) from the general compilation
unit data. It's only the former that needs to be re-generated as part of
the type re-compilation and by separating it we can allocate memory just
for that and keep using the mmap'ed general unit data for everything
else (including byte code).
Another upside of this change is that it allows eliminating the recently
introduced concept of a backing unit again.
Saves ~149K RAM with the QQC1 gallery.
Task-number: QTBUG-69588
Change-Id: Ie88a4286feb7e2f472f58a28fa5dd6ff0a91c4b6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|
|
|
|
|
|
|
| |
This will make it easier to move the data out of CompiledData::Unit and
into a separate data structure.
Change-Id: I32e6233a66f2279b44cc06ef7c3505db4a565f98
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|
|
|
|
|
|
|
|
| |
Replace use of CompiledData::Unit::stringAt with
CompilationUnit::stringAt as central place, in preparation for allowing
derived compilation units to retrieve strings from base units.
Change-Id: Ifafe6c18a9fd8d1e2259a60c17200124869b4c2d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|
|
|
|
|
|
|
|
|
| |
Store doubles in bindings in the constant table of the compilation unit
instead of each binding. This removes one of the two 8 byte members of
the value union and also allows for sharing of constants throughout a
.qml file.
Change-Id: I1d7daafdb7f24e34c14cd160d2dcb2c5aaac1c50
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|
|
|
|
|
|
|
|
|
|
| |
Loading those must not fail the file relocation test, so set the source
file names to empty, as we also do for .qml files.
Also added tests for all the scenarios: no embedded file paths for AOT
files but absolute paths for run-time created cache files.
Change-Id: I3fc92e89cfd0da512afeac22bd0da3e915ec46ea
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|\
| |
| |
| |
| |
| |
| |
| | |
Conflicts:
examples/quick/tableview/pixelator/main.cpp
examples/quick/demos/
Change-Id: Id7eaae6584017a4ab4ec9dd97b56d5c1a417f0e3
|
| |
| |
| |
| |
| |
| |
| |
| | |
On some systems, we *do* have sub-second file time resolution, so we
don't have to wait one second.
Change-Id: Id2be776c7ae0467c9d9ffffd1543325ce53f10fd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This could happen if the .qmlc file is stale or corrupt for some reason.
In that case, we should try to load a cache file from the user's
CacheLocation.
Change-Id: Id2be776c7ae0467c9d9ffffd1543204272a531d1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
|/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch eliminates the annoying behavior of the QML compiler that .qmlc cache
files are stored alongside the sources. When cache files are generated at
run-time, then they are always stored in the application's local cache directory
defined by QStandardPaths::CacheLocation (qmlcache subfolder). The application's
uninstaller is responsible for cleaning up the cache directory during removal.
If explicitly precompiled QML files exist at the source location, then they are
loaded from there and no cache file is being generated.
Storing cache files in the source directory is as problematic as an in-tree
build. The cache files pollute the source directory and create unnecessary
inconvenience with version control systems.
[ChangeLog][QtQml][QQmlEngine] QML cache files are now always stored in the
application's cache directory when being generated at run-time. If precompiled
QML files exist at the source location, then they are loaded and no cache file
is being generated. The application's uninstaller is responsible for cleaning up
the cache during removal.
Task-number: QTBUG-56150
Change-Id: I5a64b7f958e782e03c71873a82cef4b07011cbf1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
|
|
|
|
|
|
|
| |
The cache files are architecture and ABI independent, so we can remove
any associated field/code as well as the workaround for Android.
Change-Id: Ia52a5be886fc22a2105460e003e7a76af7dc1818
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Conflicts:
src/qml/compiler/qv4codegen.cpp
src/qml/compiler/qv4compileddata.cpp
src/qml/compiler/qv4compileddata_p.h
src/qml/compiler/qv4isel_moth_p.h
src/qml/compiler/qv4ssa.cpp
src/qml/jit/qv4assembler_p.h
src/qml/jit/qv4isel_masm_p.h
src/qml/jit/qv4regalloc.cpp
src/qml/jsruntime/qv4engine.cpp
src/qml/jsruntime/qv4qmlcontext_p.h
src/qml/jsruntime/qv4regexp.cpp
src/qml/jsruntime/qv4regexp_p.h
src/qml/jsruntime/qv4regexpobject.cpp
src/qml/jsruntime/qv4runtime.cpp
src/qml/jsruntime/qv4vme_moth.cpp
src/qml/qml/v8/qqmlbuiltinfunctions.cpp
tests/auto/qml/qml.pro
tests/auto/qml/qmlplugindump/tst_qmlplugindump.cpp
tools/qmlcachegen/qmlcachegen.cpp
Change-Id: I1577e195c736f3414089036b957a01cb91a3ca23
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
When a qml file uses a qml singleton, we need to reliably detect when
the singleton changes and re-generate the cache of the qml file using
it. This is a scenario covered and fixed by commit
5b94de09cc738837d1539e28b3c0dccd17c18d29, with the exception that
currently QML singletons registered via qmlRegisterSingleton were not
added to the list of dependent singletons for a qml file. We can fix
this by extending findCompositeSingletons() to also cover the singletons
that do not originate from a qmldir file.
[ChangeLog][Qt][Qml] Fixed bug where sometimes changes to a qml
singleton would not propagate to the users or cause crashes.
Task-number: QTBUG-62243
Change-Id: I16c3d9ba65fd82e898a29b946c341907751135a9
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| | |
The code for a function are now stored inline to the function, so the
previous offsets were bogus.
Change-Id: Ia8f28e56116bd9bcce1c5619e45af866f1bbf5e4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
|\|
| |
| |
| | |
Change-Id: Iff06429f948ac6cdec77a9e5bb8c5375c56fe705
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
QQmlType is now refcounted, and we need to use it by
value, to control it's lifetime properly. This is
required, so we can clean up the QQmlMetaTypeData
cache on engine destruction and with trimComponentCache()
Task-number: QTBUG-61536
Change-Id: If86391c86ea20a646ded7c9925d8f743f628fb91
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
| |
| |
| |
| |
| | |
Change-Id: If6e5b29d17b35d62ffb3fe9f7d47ceb1fcbbfad2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Add correct generator name (always moth for the interpreter). Also fix
the test: where we generated a dummy function 0, we now don't do that
anymore, so correct the function index, and the check for the code
offset.
Change-Id: I4c07b2b53483c513dfaf8993e1d0111bcc825179
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
And changed the namespace of those classes to
QV4::Compiler.
ScanFunctions should over time also move into its
own file.
Change-Id: If084acea4a9a20b9c79ad47dac19e02dc720e098
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Remove all files from the old compiler pipeline that are now
unused. This includes the whole IR, JIT code generation,
and the old Moth Isel.
Change-Id: I50d06abfbcf0e9755a54ed94638f8bb74f9512b1
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
|
|/
|
|
|
|
|
|
| |
Make sure all libs and tests compile again after
the latest changes.
Change-Id: I749d3d2d0109cc97df2ecec93809ea8a1b3014a9
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
When a QML file depends on a QML singleton, we failed to include it in
the dependency hash. Thus changes to the QML singleton did not result in
a re-creation of the caches of files that use it.
The list of singletons comes from random-ordered hashes in the qml
import handling. We provide an order to the direct dependencies by
sorting by the singleton type names.
Task-number: QTBUG-58486
Change-Id: Ie7e9d006f9bf3a60af1f819ee439c29bc234bd8a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|/
|
|
|
|
|
|
|
| |
For timestamp comparison it is not necessary to create another
QFileInfo() object and call exists() and lastModified(), when we can
pass that information through from the type loader.
Change-Id: I225cd36e672f1f390bddb4e6ebfafa3fc1269795
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
| |
When somebody renames the directory name underneath a QML file and its
cache file, then we need to re-generate the cache as it contains the
fully path of the source path. That is sometimes used to resolve
relative URLs (such as images) and therefore needs updating (by
re-creating the cache).
Task-number: QTBUG-57644
Change-Id: I9766668859aad8e9d71f278c3f26c0585258c14e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use the right function for converting a qrc:/// url to a local path.
QUrl::toLocalFile() gives us an empty path, which prevents us from
getting a time stamp and comparing it against the stamp in the cache
file.
This fixes disk caching with samegame.
Change-Id: Id3eb270f1f7a7f25143d2f075a45f32bdb0384c5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|
|
|
|
|
|
|
|
| |
Make this test pass when we have the time stamp available in the qrc
data (since commit d20773824529d191e7b483b505107dce6c1b1c3d in qtbase)
or when not (when the engine falls back to the program executable).
Change-Id: Idb9a6951d76515a2482d573b40da99871bc442cd
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We use an MD5 checksum over the meta-object data to verify that the
types a QML file depends on haven't changed since the cache was
generated. However when the dependent types are QML types, then the
meta-object data contains dynamically generated type names such as
QMLTYPE_1234, which is non-deterministic. To address this, we resort to
the checksum over the meta-object data only for C++ types (if those
change it's likely an incompatible change) and for QML types use the
fact that all the information about the QML declared types comes from
the QML file only, which means we can in that case simply use a checksum
over the QV4::CompiledData memory chunk.
In addition we need to ensure that the generated CompiledData memory chunk
is deterministic by avoiding any uninitialized bytes (memset) and using
a map instead of a hash for the mapping of object index to object id.
Task-number: QTBUG-55926
Change-Id: I27c840b1960ad36b486198e504b70989c22a3972
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
|
|
|
|
|
|
|
|
|
|
| |
For loading and verification we compare against the time stamp of the
executable, so we should do the same thing when generating the cache
data.
Task-number: QTBUG-55926
Change-Id: If5922e76b8ae86185f6eacb6aeeb5c3afbc1f8d5
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
|
|
|
|
|
|
|
|
| |
By storing the cached data in QStandardPaths::CacheDir + "/qmlcache/"
+ sha1(filename)
Change-Id: I6a8b4ca701019204fff362504697c3dac9f54bf1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|
|
|
|
|
|
|
| |
Local aliases are always "resolved". We must be careful not to access
the same field in the union otherwise and mistake it as property index.
Change-Id: I6369cdba145a62dcdaa10d8f4ee84bfa3cbfa0e3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
|
|
|
|
|
|
|
| |
Except on Windows, where there is still one bug to fix.
Change-Id: I1a22f42859733eedd37596a3e8fc09680720ff10
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
|