/****************************************************************************
**
** Copyright (C) 2012 Nokia Corporation and/or its subsidiary(-ies).
** Contact: http://www.qt-project.org/
**
** This file is part of the test suite of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL$
** GNU Lesser General Public License Usage
** This file may be used under the terms of the GNU Lesser General Public
** License version 2.1 as published by the Free Software Foundation and
** appearing in the file LICENSE.LGPL included in the packaging of this
** file. Please review the following information to ensure the GNU Lesser
** General Public License version 2.1 requirements will be met:
** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain additional
** rights. These rights are described in the Nokia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU General
** Public License version 3.0 as published by the Free Software Foundation
** and appearing in the file LICENSE.GPL included in the packaging of this
** file. Please review the following information to ensure the GNU General
** Public License version 3.0 requirements will be met:
** http://www.gnu.org/copyleft/gpl.html.
**
** Other Usage
** Alternatively, this file may be used in accordance with the terms and
** conditions contained in a signed written agreement between you and Nokia.
**
**
**
**
**
**
** $QT_END_LICENSE$
**
****************************************************************************/

/*!
    \qmlclass TestCase TestCase
    \brief The TestCase item represents a unit test case.
    \since 4.8
    \ingroup qtest::qml

    \section1 Introduction to QML test cases

    Test cases are written as JavaScript functions within a TestCase
    element:

    \code
    import QtQuick 1.0
    import QtQuickTest 1.0

    TestCase {
        name: "MathTests"

        function test_math() {
            compare(2 + 2, 4, "2 + 2 = 4")
        }

        function test_fail() {
            compare(2 + 2, 5, "2 + 2 = 5")
        }
    }
    \endcode

    Functions whose names start with "test_" are treated as test cases
    to be executed.  The \l name property is used to prefix the functions
    in the output:

    \code
    ********* Start testing of MathTests *********
    Config: Using QTest library 4.7.2, Qt 4.7.2
    PASS   : MathTests::initTestCase()
    FAIL!  : MathTests::test_fail() 2 + 2 = 5
       Actual (): 4
       Expected (): 5
       Loc: [/home/.../tst_math.qml(12)]
    PASS   : MathTests::test_math()
    PASS   : MathTests::cleanupTestCase()
    Totals: 3 passed, 1 failed, 0 skipped
    ********* Finished testing of MathTests *********
    \endcode

    Because of the way JavaScript properties work, the order in which the
    test functions are found is unpredictable.  To assist with predictability,
    the test framework will sort the functions on ascending order of name.
    This can help when there are two tests that must be run in order.

    Multiple TestCase elements can be supplied.  The test program will exit
    once they have all completed.  If a test case doesn't need to run
    (because a precondition has failed), then \l optional can be set to true.

    \section1 Data-driven tests

    Table data can be provided to a test using a function name that ends
    with "_data":

    \code
    import QtQuick 1.0
    import QtQuickTest 1.0

    TestCase {
        name: "DataTests"

        function test_table_data() {
            return [
                {tag: "2 + 2 = 4", a: 2, b: 2, answer: 4 },
                {tag: "2 + 6 = 8", a: 2, b: 6, answer: 8 },
            ]
        }

        function test_table(data) {
            compare(data.a + data.b, data.answer)
        }
    }
    \endcode

    The test framework will iterate over all of the rows in the table
    and pass each row to the test function.  As shown, the columns can be
    extracted for use in the test.  The \c tag column is special - it is
    printed by the test framework when a row fails, to help the reader
    identify which case failed amongst a set of otherwise passing tests.

    \section1 Benchmarks

    Functions whose names start with "benchmark_" will be run multiple
    times with the Qt benchmark framework, with an average timing value
    reported for the runs.  This is equivalent to using the \c{QBENCHMARK}
    macro in the C++ version of QTestLib.

    \code
    TestCase {
        id: top
        name: "CreateBenchmark"

        function benchmark_create_component() {
            var component = Qt.createComponent("item.qml")
            var obj = component.createObject(top)
            obj.destroy()
            component.destroy()
        }
    }

    RESULT : CreateBenchmark::benchmark_create_component:
         0.23 msecs per iteration (total: 60, iterations: 256)
    PASS   : CreateBenchmark::benchmark_create_component()
    \endcode

    To get the effect of the \c{QBENCHMARK_ONCE} macro, prefix the test
    function name with "benchmark_once_".

    \section1 Simulating keyboard and mouse events

    The keyPress(), keyRelease(), and keyClick() methods can be used
    to simulate keyboard events within unit tests.  The events are
    delivered to the currently focused QML item.

    \code
    Rectangle {
        width: 50; height: 50
        focus: true

        TestCase {
            name: "KeyClick"
            when: windowShown

            function test_key_click() {
                keyClick(Qt.Key_Left)
                ...
            }
        }
    }
    \endcode

    The mousePress(), mouseRelease(), mouseClick(), mouseDoubleClick(),
    and mouseMove() methods can be used to simulate mouse events in a
    similar fashion.

    \b{Note:} keyboard and mouse events can only be delivered once the
    main window has been shown.  Attempts to deliver events before then
    will fail.  Use the \l when and windowShown properties to track
    when the main window has been shown.

    \sa SignalSpy
*/

/*!
    \qmlproperty string TestCase::name

    This property defines the name of the test case for result reporting.
    The default is the empty string.

    \code
    TestCase {
        name: "ButtonTests"
        ...
    }
    \endcode
*/

/*!
    \qmlproperty bool TestCase::when

    This property should be set to true when the application wants
    the test cases to run.  The default value is true.  In the following
    example, a test is run when the user presses the mouse button:

    \code
    Rectangle {
        id: foo
        width: 640; height: 480
        color: "cyan"

        MouseArea {
            id: area
            anchors.fill: parent
        }

        property bool bar: true

        TestCase {
            name: "ItemTests"
            when: area.pressed
            id: test1

            function test_bar() {
                verify(bar)
            }
        }
    }
    \endcode

    The test application will exit once all \l TestCase elements
    have been triggered and have run.  The \l optional property can
    be used to exclude a \l TestCase element.

    \sa optional, completed
*/

/*!
    \qmlproperty bool TestCase::optional

    Multiple \l TestCase elements can be supplied in a test application.
    The application will exit once they have all completed.  If a test case
    does not need to run (because a precondition has failed), then this
    property can be set to true.  The default value is false.

    \code
    TestCase {
        when: false
        optional: true
        function test_not_run() {
            verify(false)
        }
    }
    \endcode

    \sa when, completed
*/

/*!
    \qmlproperty bool TestCase::completed

    This property will be set to true once the test case has completed
    execution.  Test cases are only executed once.  The initial value
    is false.

    \sa running, when
*/

/*!
    \qmlproperty bool TestCase::running

    This property will be set to true while the test case is running.
    The initial value is false, and the value will become false again
    once the test case completes.

    \sa completed, when
*/

/*!
    \qmlproperty bool TestCase::windowShown

    This property will be set to true after the QML viewing window has
    been displayed.  Normally test cases run as soon as the test application
    is loaded and before a window is displayed.  If the test case involves
    visual elements and behaviors, then it may need to be delayed until
    after the window is shown.

    \code
    Button {
        id: button
        onClicked: text = "Clicked"
        TestCase {
            name: "ClickTest"
            when: windowShown
            function test_click() {
                button.clicked();
                compare(button.text, "Clicked");
            }
        }
    }
    \endcode
*/

/*!
    \qmlmethod TestCase::fail(message = "")

    Fails the current test case, with the optional \a message.
    Similar to \c{QFAIL(message)} in C++.
*/

/*!
    \qmlmethod TestCase::verify(condition, message = "")

    Fails the current test case if \a condition is false, and
    displays the optional \a message.  Similar to \c{QVERIFY(condition)}
    or \c{QVERIFY2(condition, message)} in C++.
*/

/*!
    \qmlmethod TestCase::compare(actual, expected, message = "")

    Fails the current test case if \a actual is not the same as
    \a expected, and displays the optional \a message.  Similar
    to \c{QCOMPARE(actual, expected)} in C++.

    \sa tryCompare()
*/

/*!
    \qmlmethod TestCase::tryCompare(obj, property, expected, timeout = 5000)

    Fails the current test case if the specified \a property on \a obj
    is not the same as \a expected.  The test will be retried multiple
    times until the \a timeout (in milliseconds) is reached.

    This function is intended for testing applications where a property
    changes value based on asynchronous events.  Use compare() for testing
    synchronous property changes.

    \code
    tryCompare(img, "status", BorderImage.Ready)
    compare(img.width, 120)
    compare(img.height, 120)
    compare(img.horizontalTileMode, BorderImage.Stretch)
    compare(img.verticalTileMode, BorderImage.Stretch)
    \endcode

    SignalSpy::wait() provides an alternative method to wait for a
    signal to be emitted.

    \sa compare(), SignalSpy::wait()
*/

/*!
    \qmlmethod TestCase::skip(message = "")

    Skips the current test case and prints the optional \a message.
    If this is a data-driven test, then only the current row is skipped.
    Similar to \c{QSKIP(message)} in C++.
*/

/*!
    \qmlmethod TestCase::expectFail(tag, message)

    In a data-driven test, marks the row associated with \a tag as
    expected to fail.  When the fail occurs, display the \a message,
    abort the test, and mark the test as passing.  Similar to
    \c{QEXPECT_FAIL(tag, message, Abort)} in C++.

    If the test is not data-driven, then \a tag must be set to
    the empty string.

    \sa expectFailContinue()
*/

/*!
    \qmlmethod TestCase::expectFailContinue(tag, message)

    In a data-driven test, marks the row associated with \a tag as
    expected to fail.  When the fail occurs, display the \a message,
    and then continue the test.  Similar to
    \c{QEXPECT_FAIL(tag, message, Continue)} in C++.

    If the test is not data-driven, then \a tag must be set to
    the empty string.

    \sa expectFail()
*/

/*!
    \qmlmethod TestCase::warn(message)

    Prints \a message as a warning message.  Similar to
    \c{QWARN(message)} in C++.

    \sa ignoreWarning()
*/

/*!
    \qmlmethod TestCase::ignoreWarning(message)

    Marks \a message as an ignored warning message.  When it occurs,
    the warning will not be printed and the test passes.  If the message
    does not occur, then the test will fail.  Similar to
    \c{QTest::ignoreMessage(QtWarningMsg, message)} in C++.

    \sa warn()
*/

/*!
    \qmlmethod TestCase::wait(ms)

    Waits for \a ms milliseconds while processing Qt events.

    \sa sleep()
*/

/*!
    \qmlmethod TestCase::sleep(ms)

    Sleeps for \a ms milliseconds without processing Qt events.

    \sa wait()
*/

/*!
    \qmlmethod TestCase::keyClick(key, modifiers = Qt.NoModifier, delay = -1)

    Simulates clicking of \a key with an optional \a modifier on the currently
    focused item.  If \a delay is larger than 0, the test will wait for
    \a delay milliseconds.

    \sa keyPress(), keyRelease()
*/

/*!
    \qmlmethod TestCase::keyPress(key, modifiers = Qt.NoModifier, delay = -1)

    Simulates pressing a \a key with an optional \a modifier on the currently
    focused item.  If \a delay is larger than 0, the test will wait for
    \a delay milliseconds.

    \b{Note:} At some point you should release the key using keyRelease().

    \sa keyRelease(), keyClick()
*/

/*!
    \qmlmethod TestCase::keyRelease(key, modifiers = Qt.NoModifier, delay = -1)

    Simulates releasing a \a key with an optional \a modifier on the currently
    focused item.  If \a delay is larger than 0, the test will wait for
    \a delay milliseconds.

    \sa keyPress(), keyClick()
*/

/*!
    \qmlmethod TestCase::mousePress(item, x, y, button = Qt.LeftButton, modifiers = Qt.NoModifier, delay = -1)

    Simulates pressing a mouse \a button with an optional \a modifier
    on an \a item.  The position is defined by \a x and \a y.  If \a delay is
    specified, the test will wait for the specified amount of milliseconds
    before the press.

    The position given by \a x and \a y is transformed from the co-ordinate
    system of \a item into window co-ordinates and then delivered.
    If \a item is obscured by another item, or a child of \a item occupies
    that position, then the event will be delivered to the other item instead.

    \sa mouseRelease(), mouseClick(), mouseDoubleClick(), mouseMove()
*/

/*!
    \qmlmethod TestCase::mouseRelease(item, x, y, button = Qt.LeftButton, modifiers = Qt.NoModifier, delay = -1)

    Simulates releasing a mouse \a button with an optional \a modifier
    on an \a item.  The position of the release is defined by \a x and \a y.
    If \a delay is specified, the test will wait for the specified amount of
    milliseconds before releasing the button.

    The position given by \a x and \a y is transformed from the co-ordinate
    system of \a item into window co-ordinates and then delivered.
    If \a item is obscured by another item, or a child of \a item occupies
    that position, then the event will be delivered to the other item instead.

    \sa mousePress(), mouseClick(), mouseDoubleClick(), mouseMove()
*/

/*!
    \qmlmethod TestCase::mouseClick(item, x, y, button = Qt.LeftButton, modifiers = Qt.NoModifier, delay = -1)

    Simulates clicking a mouse \a button with an optional \a modifier
    on an \a item.  The position of the click is defined by \a x and \a y.
    If \a delay is specified, the test will wait for the specified amount of
    milliseconds before pressing and before releasing the button.

    The position given by \a x and \a y is transformed from the co-ordinate
    system of \a item into window co-ordinates and then delivered.
    If \a item is obscured by another item, or a child of \a item occupies
    that position, then the event will be delivered to the other item instead.

    \sa mousePress(), mouseRelease(), mouseDoubleClick(), mouseMove()
*/

/*!
    \qmlmethod TestCase::mouseDoubleClick(item, x, y, button = Qt.LeftButton, modifiers = Qt.NoModifier, delay = -1)

    Simulates double-clicking a mouse \a button with an optional \a modifier
    on an \a item.  The position of the click is defined by \a x and \a y.
    If \a delay is specified, the test will wait for the specified amount of
    milliseconds before pressing and before releasing the button.

    The position given by \a x and \a y is transformed from the co-ordinate
    system of \a item into window co-ordinates and then delivered.
    If \a item is obscured by another item, or a child of \a item occupies
    that position, then the event will be delivered to the other item instead.

    \sa mousePress(), mouseRelease(), mouseClick(), mouseMove()
*/

/*!
    \qmlmethod TestCase::mouseMove(item, x, y, delay = -1)

    Moves the mouse pointer to the position given by \a x and \a y within
    \a item.  If a \a delay (in milliseconds) is given, the test will wait
    before moving the mouse pointer.

    The position given by \a x and \a y is transformed from the co-ordinate
    system of \a item into window co-ordinates and then delivered.
    If \a item is obscured by another item, or a child of \a item occupies
    that position, then the event will be delivered to the other item instead.

    \sa mousePress(), mouseRelease(), mouseClick(), mouseDoubleClick()
*/

/*!
    \qmlmethod TestCase::initTestCase()

    This function is called before any other test functions in the
    \l TestCase element.  The default implementation does nothing.
    The application can provide its own implementation to perform
    test case initialization.

    \sa cleanupTestCase(), init()
*/

/*!
    \qmlmethod TestCase::cleanupTestCase()

    This function is called after all other test functions in the
    \l TestCase element have completed.  The default implementation
    does nothing.  The application can provide its own implementation
    to perform test case cleanup.

    \sa initTestCase(), cleanup()
*/

/*!
    \qmlmethod TestCase::init()

    This function is called before each test function that is
    executed in the \l TestCase element.  The default implementation
    does nothing.  The application can provide its own implementation
    to perform initialization before each test function.

    \sa cleanup(), initTestCase()
*/

/*!
    \qmlmethod TestCase::cleanup()

    This function is called after each test function that is
    executed in the \l TestCase element.  The default implementation
    does nothing.  The application can provide its own implementation
    to perform cleanup after each test function.

    \sa init(), cleanupTestCase()
*/