/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is JavaScript Engine testing utilities.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communication Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

gTestfile = 'forin-001.js';

/**
 *  File Name:          forin-001.js
 *  ECMA Section:
 *  Description:        The forin-001 statement
 *
 *  Verify that the property name is assigned to the property on the left
 *  hand side of the for...in expression.
 *
 *  Author:             christine@netscape.com
 *  Date:               28 August 1998
 */
var SECTION = "forin-001";
var VERSION = "ECMA_2";
var TITLE   = "The for...in  statement";
var BUGNUMBER="330890";
var BUGNUMBER="http://scopus.mcom.com/bugsplat/show_bug.cgi?id=344855";

startTest();
writeHeaderToLog( SECTION + " "+ TITLE);

ForIn_1( { length:4, company:"netscape", year:2000, 0:"zero" } );
ForIn_2( { length:4, company:"netscape", year:2000, 0:"zero" } );
ForIn_3( { length:4, company:"netscape", year:2000, 0:"zero" } );

//    ForIn_6({ length:4, company:"netscape", year:2000, 0:"zero" });
//    ForIn_7({ length:4, company:"netscape", year:2000, 0:"zero" });
ForIn_8({ length:4, company:"netscape", year:2000, 0:"zero" });

test();

/**
 *  Verify that the left side argument is evaluated with every iteration.
 *  Verify that the name of each property of the object is assigned to a
 *  a property.
 *
 */
function ForIn_1( object ) {
  PropertyArray = new Array();
  ValueArray = new Array();

  for ( PropertyArray[PropertyArray.length] in object ) {
    ValueArray[ValueArray.length] =
      object[PropertyArray[PropertyArray.length-1]];
  }

  for ( var i = 0; i < PropertyArray.length; i++ ) {
    new TestCase(
      SECTION,
      "object[" + PropertyArray[i] +"]",
      object[PropertyArray[i]],
      ValueArray[i]
      );
  }

  new TestCase(
    SECTION,
    "object.length",
    PropertyArray.length,
    object.length );
}

/**
 *  Similar to ForIn_1, except it should increment the counter variable
 *  every time the left hand expression is evaluated.
 */
function ForIn_2( object ) {
  PropertyArray = new Array();
  ValueArray = new Array();
  var i = 0;

  for ( PropertyArray[i++] in object ) {
    ValueArray[ValueArray.length] =
      object[PropertyArray[PropertyArray.length-1]];
  }

  for ( i = 0; i < PropertyArray.length; i++ ) {
    new TestCase(
      SECTION,
      "object[" + PropertyArray[i] +"]",
      object[PropertyArray[i]],
      ValueArray[i]
      );
  }

  new TestCase(
    SECTION,
    "object.length",
    PropertyArray.length,
    object.length );
}

/**
 *  Break out of a for...in loop
 *
 *
 */
function ForIn_3( object ) {
  var checkBreak = "pass";
  var properties = new Array();
  var values = new Array();

  for ( properties[properties.length] in object ) {
    values[values.length] = object[properties[properties.length-1]];
    break;
    checkBreak = "fail";
  }

  new TestCase(
    SECTION,
    "check break out of for...in",
    "pass",
    checkBreak );

  new TestCase(
    SECTION,
    "properties.length",
    1,
    properties.length );

  new TestCase(
    SECTION,
    "object["+properties[0]+"]",
    values[0],
    object[properties[0]] );
}

/**
 *  Break out of a labeled for...in loop.
 */
function ForIn_4( object ) {
  var result1 = 0;
  var result2 = 0;
  var result3 = 0;
  var result4 = 0;
  var i = 0;
  var property = new Array();

butterbean: {
    result1++;

    for ( property[i++] in object ) {
      result2++;
      break;
      result4++;
    }
    result3++;
  }

  new TestCase(
    SECTION,
    "verify labeled statement is only executed once",
    true,
    result1 == 1 );

  new TestCase(
    SECTION,
    "verify statements in for loop are evaluated",
    true,
    result2 == i );

  new TestCase(
    SECTION,
    "verify break out of labeled for...in loop",
    true,
    result4 == 0 );

  new TestCase(
    SECTION,
    "verify break out of labeled block",
    true,
    result3 == 0 );
}

/**
 *  Labeled break out of a labeled for...in loop.
 */
function ForIn_5 (object) {
  var result1 = 0;
  var result2 = 0;
  var result3 = 0;
  var result4 = 0;
  var i = 0;
  var property = new Array();

bigredbird: {
    result1++;
    for ( property[i++] in object ) {
      result2++;
      break bigredbird;
      result4++;
    }
    result3++;
  }

  new TestCase(
    SECTION,
    "verify labeled statement is only executed once",
    true,
    result1 == 1 );

  new TestCase(
    SECTION,
    "verify statements in for loop are evaluated",
    true,
    result2 == i );

  new TestCase(
    SECTION,
    "verify break out of labeled for...in loop",
    true,
    result4 == 0 );

  new TestCase(
    SECTION,
    "verify break out of labeled block",
    true,
    result3 == 0 );
}

/**
 *  Labeled continue from a labeled for...in loop
 */
function ForIn_7( object ) {
  var result1 = 0;
  var result2 = 0;
  var result3 = 0;
  var result4 = 0;
  var i = 0;
  var property = new Array();

bigredbird:
  for ( property[i++] in object ) {
    result2++;
    continue bigredbird;
    result4++;
  }

  new TestCase(
    SECTION,
    "verify statements in for loop are evaluated",
    true,
    result2 == i );

  new TestCase(
    SECTION,
    "verify break out of labeled for...in loop",
    true,
    result4 == 0 );

  new TestCase(
    SECTION,
    "verify break out of labeled block",
    true,
    result3 == 1 );
}


/**
 *  continue in a for...in loop
 *
 */
function ForIn_8( object ) {
  var checkBreak = "pass";
  var properties = new Array();
  var values = new Array();

  for ( properties[properties.length] in object ) {
    values[values.length] = object[properties[properties.length-1]];
    break;
    checkBreak = "fail";
  }

  new TestCase(
    SECTION,
    "check break out of for...in",
    "pass",
    checkBreak );

  new TestCase(
    SECTION,
    "properties.length",
    1,
    properties.length );

  new TestCase(
    SECTION,
    "object["+properties[0]+"]",
    values[0],
    object[properties[0]] );
}