/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is Mozilla Communicator client code, released
 * March 31, 1998.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

gTestfile = '11.2.1-1.js';

/**
   File Name:          11.2.1-1.js
   ECMA Section:       11.2.1 Property Accessors
   Description:

   Properties are accessed by name, using either the dot notation:
   MemberExpression . Identifier
   CallExpression . Identifier

   or the bracket notation:    MemberExpression [ Expression ]
   CallExpression [ Expression ]

   The dot notation is explained by the following syntactic conversion:
   MemberExpression . Identifier
   is identical in its behavior to
   MemberExpression [ <identifier-string> ]
   and similarly
   CallExpression . Identifier
   is identical in its behavior to
   CallExpression [ <identifier-string> ]
   where <identifier-string> is a string literal containing the same sequence
   of characters as the Identifier.

   The production MemberExpression : MemberExpression [ Expression ] is
   evaluated as follows:

   1.  Evaluate MemberExpression.
   2.  Call GetValue(Result(1)).
   3.  Evaluate Expression.
   4.  Call GetValue(Result(3)).
   5.  Call ToObject(Result(2)).
   6.  Call ToString(Result(4)).
   7.  Return a value of type Reference whose base object is Result(5) and
   whose property name is Result(6).

   The production CallExpression : CallExpression [ Expression ] is evaluated
   in exactly the same manner, except that the contained CallExpression is
   evaluated in step 1.

   Author:             christine@netscape.com
   Date:               12 november 1997
*/
var SECTION = "11.2.1-1";
var VERSION = "ECMA_1";
startTest();
var TITLE   = "Property Accessors";
writeHeaderToLog( SECTION + " "+TITLE );

// go through all Native Function objects, methods, and properties and get their typeof.

var PROPERTY = new Array();
var p = 0;

// properties and functions of the global object

PROPERTY[p++] = new Property( "this",   "NaN",          "number" );
PROPERTY[p++] = new Property( "this",   "Infinity",     "number" );
PROPERTY[p++] = new Property( "this",   "eval",         "function" );
PROPERTY[p++] = new Property( "this",   "parseInt",     "function" );
PROPERTY[p++] = new Property( "this",   "parseFloat",   "function" );
PROPERTY[p++] = new Property( "this",   "escape",       "function" );
PROPERTY[p++] = new Property( "this",   "unescape",     "function" );
PROPERTY[p++] = new Property( "this",   "isNaN",        "function" );
PROPERTY[p++] = new Property( "this",   "isFinite",     "function" );
PROPERTY[p++] = new Property( "this",   "Object",       "function" );
PROPERTY[p++] = new Property( "this",   "Number",       "function" );
PROPERTY[p++] = new Property( "this",   "Function",     "function" );
PROPERTY[p++] = new Property( "this",   "Array",        "function" );
PROPERTY[p++] = new Property( "this",   "String",       "function" );
PROPERTY[p++] = new Property( "this",   "Boolean",      "function" );
PROPERTY[p++] = new Property( "this",   "Date",         "function" );
PROPERTY[p++] = new Property( "this",   "Math",         "object" );

// properties and  methods of Object objects

PROPERTY[p++] = new Property( "Object", "prototype",    "object" );
PROPERTY[p++] = new Property( "Object", "toString",     "function" );
PROPERTY[p++] = new Property( "Object", "valueOf",      "function" );
PROPERTY[p++] = new Property( "Object", "constructor",  "function" );

// properties of the Function object

PROPERTY[p++] = new Property( "Function",   "prototype",    "function" );
PROPERTY[p++] = new Property( "Function.prototype",   "toString",     "function" );
PROPERTY[p++] = new Property( "Function.prototype",   "length",       "number" );
PROPERTY[p++] = new Property( "Function.prototype",   "valueOf",      "function" );

Function.prototype.myProperty = "hi";

PROPERTY[p++] = new Property( "Function.prototype",   "myProperty",   "string" );

// properties of the Array object
PROPERTY[p++] = new Property( "Array",      "prototype",    "object" );
PROPERTY[p++] = new Property( "Array",      "length",       "number" );
PROPERTY[p++] = new Property( "Array.prototype",      "constructor",  "function" );
PROPERTY[p++] = new Property( "Array.prototype",      "toString",     "function" );
PROPERTY[p++] = new Property( "Array.prototype",      "join",         "function" );
PROPERTY[p++] = new Property( "Array.prototype",      "reverse",      "function" );
PROPERTY[p++] = new Property( "Array.prototype",      "sort",         "function" );

// properties of the String object
PROPERTY[p++] = new Property( "String",     "prototype",    "object" );
PROPERTY[p++] = new Property( "String",     "fromCharCode", "function" );
PROPERTY[p++] = new Property( "String.prototype",     "toString",     "function" );
PROPERTY[p++] = new Property( "String.prototype",     "constructor",  "function" );
PROPERTY[p++] = new Property( "String.prototype",     "valueOf",      "function" );
PROPERTY[p++] = new Property( "String.prototype",     "charAt",       "function" );
PROPERTY[p++] = new Property( "String.prototype",     "charCodeAt",   "function" );
PROPERTY[p++] = new Property( "String.prototype",     "indexOf",      "function" );
PROPERTY[p++] = new Property( "String.prototype",     "lastIndexOf",  "function" );
PROPERTY[p++] = new Property( "String.prototype",     "split",        "function" );
PROPERTY[p++] = new Property( "String.prototype",     "substring",    "function" );
PROPERTY[p++] = new Property( "String.prototype",     "toLowerCase",  "function" );
PROPERTY[p++] = new Property( "String.prototype",     "toUpperCase",  "function" );
PROPERTY[p++] = new Property( "String.prototype",     "length",       "number" );

// properties of the Boolean object
PROPERTY[p++] = new Property( "Boolean",    "prototype",    "object" );
PROPERTY[p++] = new Property( "Boolean",    "constructor",  "function" );
PROPERTY[p++] = new Property( "Boolean.prototype",    "valueOf",      "function" );
PROPERTY[p++] = new Property( "Boolean.prototype",    "toString",     "function" );

// properties of the Number object

PROPERTY[p++] = new Property( "Number",     "MAX_VALUE",    "number" );
PROPERTY[p++] = new Property( "Number",     "MIN_VALUE",    "number" );
PROPERTY[p++] = new Property( "Number",     "NaN",          "number" );
PROPERTY[p++] = new Property( "Number",     "NEGATIVE_INFINITY",    "number" );
PROPERTY[p++] = new Property( "Number",     "POSITIVE_INFINITY",    "number" );
PROPERTY[p++] = new Property( "Number.prototype",     "toString",     "function" );
PROPERTY[p++] = new Property( "Number.prototype",     "constructor",  "function" );
PROPERTY[p++] = new Property( "Number.prototype",     "valueOf",        "function" );

// properties of the Math Object.
PROPERTY[p++] = new Property( "Math",   "E",        "number" );
PROPERTY[p++] = new Property( "Math",   "LN10",     "number" );
PROPERTY[p++] = new Property( "Math",   "LN2",      "number" );
PROPERTY[p++] = new Property( "Math",   "LOG2E",    "number" );
PROPERTY[p++] = new Property( "Math",   "LOG10E",   "number" );
PROPERTY[p++] = new Property( "Math",   "PI",       "number" );
PROPERTY[p++] = new Property( "Math",   "SQRT1_2",  "number" );
PROPERTY[p++] = new Property( "Math",   "SQRT2",    "number" );
PROPERTY[p++] = new Property( "Math",   "abs",      "function" );
PROPERTY[p++] = new Property( "Math",   "acos",     "function" );
PROPERTY[p++] = new Property( "Math",   "asin",     "function" );
PROPERTY[p++] = new Property( "Math",   "atan",     "function" );
PROPERTY[p++] = new Property( "Math",   "atan2",    "function" );
PROPERTY[p++] = new Property( "Math",   "ceil",     "function" );
PROPERTY[p++] = new Property( "Math",   "cos",      "function" );
PROPERTY[p++] = new Property( "Math",   "exp",      "function" );
PROPERTY[p++] = new Property( "Math",   "floor",    "function" );
PROPERTY[p++] = new Property( "Math",   "log",      "function" );
PROPERTY[p++] = new Property( "Math",   "max",      "function" );
PROPERTY[p++] = new Property( "Math",   "min",      "function" );
PROPERTY[p++] = new Property( "Math",   "pow",      "function" );
PROPERTY[p++] = new Property( "Math",   "random",   "function" );
PROPERTY[p++] = new Property( "Math",   "round",    "function" );
PROPERTY[p++] = new Property( "Math",   "sin",      "function" );
PROPERTY[p++] = new Property( "Math",   "sqrt",     "function" );
PROPERTY[p++] = new Property( "Math",   "tan",      "function" );

// properties of the Date object
PROPERTY[p++] = new Property( "Date",   "parse",        "function" );
PROPERTY[p++] = new Property( "Date",   "prototype",    "object" );
PROPERTY[p++] = new Property( "Date",   "UTC",          "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "constructor",    "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "toString",       "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "valueOf",        "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "getTime",        "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "getYear",        "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "getFullYear",    "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "getUTCFullYear", "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "getMonth",       "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "getUTCMonth",    "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "getDate",        "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "getUTCDate",     "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "getDay",         "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "getUTCDay",      "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "getHours",       "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "getUTCHours",    "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "getMinutes",     "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "getUTCMinutes",  "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "getSeconds",     "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "getUTCSeconds",  "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "getMilliseconds","function" );
PROPERTY[p++] = new Property( "Date.prototype",   "getUTCMilliseconds", "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "setTime",        "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "setMilliseconds","function" );
PROPERTY[p++] = new Property( "Date.prototype",   "setUTCMilliseconds", "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "setSeconds",     "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "setUTCSeconds",  "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "setMinutes",     "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "setUTCMinutes",  "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "setHours",       "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "setUTCHours",    "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "setDate",        "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "setUTCDate",     "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "setMonth",       "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "setUTCMonth",    "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "setFullYear",    "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "setUTCFullYear", "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "setYear",        "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "toLocaleString", "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "toUTCString",    "function" );
PROPERTY[p++] = new Property( "Date.prototype",   "toGMTString",    "function" );

for ( var i = 0, RESULT; i < PROPERTY.length; i++ ) {
  RESULT = eval("typeof " + PROPERTY[i].object + "." + PROPERTY[i].name );

  new TestCase( SECTION,
                "typeof " + PROPERTY[i].object + "." + PROPERTY[i].name,
                PROPERTY[i].type,
                RESULT );

  RESULT = eval("typeof " + PROPERTY[i].object + "['" + PROPERTY[i].name +"']");

  new TestCase( SECTION,
                "typeof " + PROPERTY[i].object + "['" + PROPERTY[i].name +"']",
                PROPERTY[i].type,
                RESULT );
}

test();

function MyObject( arg0, arg1, arg2, arg3, arg4 ) {
  this.name   = arg0;
}
function Property( object, name, type ) {
  this.object = object;
  this.name = name;
  this.type = type;
}