/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ /* ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is Mozilla Communicator client code, released * March 31, 1998. * * The Initial Developer of the Original Code is * Netscape Communications Corporation. * Portions created by the Initial Developer are Copyright (C) 1998 * the Initial Developer. All Rights Reserved. * * Contributor(s): * * Alternatively, the contents of this file may be used under the terms of * either the GNU General Public License Version 2 or later (the "GPL"), or * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ gTestfile = '15.1.2.2-1.js'; /** File Name: 15.1.2.2-1.js ECMA Section: 15.1.2.2 Function properties of the global object parseInt( string, radix ) Description: The parseInt function produces an integer value dictated by intepretation of the contents of the string argument according to the specified radix. When the parseInt function is called, the following steps are taken: 1. Call ToString(string). 2. Compute a substring of Result(1) consisting of the leftmost character that is not a StrWhiteSpaceChar and all characters to the right of that character. (In other words, remove leading whitespace.) 3. Let sign be 1. 4. If Result(2) is not empty and the first character of Result(2) is a minus sign -, let sign be -1. 5. If Result(2) is not empty and the first character of Result(2) is a plus sign + or a minus sign -, then Result(5) is the substring of Result(2) produced by removing the first character; otherwise, Result(5) is Result(2). 6. If the radix argument is not supplied, go to step 12. 7. Call ToInt32(radix). 8. If Result(7) is zero, go to step 12; otherwise, if Result(7) < 2 or Result(7) > 36, return NaN. 9. Let R be Result(7). 10. If R = 16 and the length of Result(5) is at least 2 and the first two characters of Result(5) are either "0x" or "0X", let S be the substring of Result(5) consisting of all but the first two characters; otherwise, let S be Result(5). 11. Go to step 22. 12. If Result(5) is empty or the first character of Result(5) is not 0, go to step 20. 13. If the length of Result(5) is at least 2 and the second character of Result(5) is x or X, go to step 17. 14. Let R be 8. 15. Let S be Result(5). 16. Go to step 22. 17. Let R be 16. 18. Let S be the substring of Result(5) consisting of all but the first two characters. 19. Go to step 22. 20. Let R be 10. 21. Let S be Result(5). 22. If S contains any character that is not a radix-R digit, then let Z be the substring of S consisting of all characters to the left of the leftmost such character; otherwise, let Z be S. 23. If Z is empty, return NaN. 24. Compute the mathematical integer value that is represented by Z in radix-R notation. (But if R is 10 and Z contains more than 20 significant digits, every digit after the 20th may be replaced by a 0 digit, at the option of the implementation; and if R is not 2, 4, 8, 10, 16, or 32, then Result(24) may be an implementation-dependent approximation to the mathematical integer value that is represented by Z in radix-R notation.) 25. Compute the number value for Result(24). 26. Return sign Result(25). Note that parseInt may interpret only a leading portion of the string as an integer value; it ignores any characters that cannot be interpreted as part of the notation of an integer, and no indication is given that any such characters were ignored. Author: christine@netscape.com Date: 28 october 1997 */ var SECTION = "15.1.2.2-1"; var VERSION = "ECMA_1"; var TITLE = "parseInt(string, radix)"; var BUGNUMBER = "none"; startTest(); writeHeaderToLog( SECTION + " "+ TITLE); var HEX_STRING = "0x0"; var HEX_VALUE = 0; new TestCase( SECTION, "parseInt.length", 2, parseInt.length ); new TestCase( SECTION, "parseInt.length = 0; parseInt.length", 2, eval("parseInt.length = 0; parseInt.length") ); new TestCase( SECTION, "var PROPS=''; for ( var p in parseInt ) { PROPS += p; }; PROPS", "prototype", eval("var PROPS=''; for ( var p in parseInt ) { PROPS += p; }; PROPS") ); new TestCase( SECTION, "delete parseInt.length", false, delete parseInt.length ); new TestCase( SECTION, "delete parseInt.length; parseInt.length", 2, eval("delete parseInt.length; parseInt.length") ); new TestCase( SECTION, "parseInt.length = null; parseInt.length", 2, eval("parseInt.length = null; parseInt.length") ); new TestCase( SECTION, "parseInt()", NaN, parseInt() ); new TestCase( SECTION, "parseInt('')", NaN, parseInt("") ); new TestCase( SECTION, "parseInt('','')", NaN, parseInt("","") ); new TestCase( SECTION, "parseInt(\" 0xabcdef ", 11259375, parseInt( " 0xabcdef " )); new TestCase( SECTION, "parseInt(\" 0XABCDEF ", 11259375, parseInt( " 0XABCDEF " ) ); new TestCase( SECTION, "parseInt( 0xabcdef )", 11259375, parseInt( "0xabcdef") ); new TestCase( SECTION, "parseInt( 0XABCDEF )", 11259375, parseInt( "0XABCDEF") ); for ( HEX_STRING = "0x0", HEX_VALUE = 0, POWER = 0; POWER < 15; POWER++, HEX_STRING = HEX_STRING +"f" ) { new TestCase( SECTION, "parseInt("+HEX_STRING+")", HEX_VALUE, parseInt(HEX_STRING) ); HEX_VALUE += Math.pow(16,POWER)*15; } for ( HEX_STRING = "0X0", HEX_VALUE = 0, POWER = 0; POWER < 15; POWER++, HEX_STRING = HEX_STRING +"f" ) { new TestCase( SECTION, "parseInt("+HEX_STRING+")", HEX_VALUE, parseInt(HEX_STRING) ); HEX_VALUE += Math.pow(16,POWER)*15; } for ( HEX_STRING = "0x0", HEX_VALUE = 0, POWER = 0; POWER < 15; POWER++, HEX_STRING = HEX_STRING +"f" ) { new TestCase( SECTION, "parseInt("+HEX_STRING+",16)", HEX_VALUE, parseInt(HEX_STRING,16) ); HEX_VALUE += Math.pow(16,POWER)*15; } for ( HEX_STRING = "0x0", HEX_VALUE = 0, POWER = 0; POWER < 15; POWER++, HEX_STRING = HEX_STRING +"f" ) { new TestCase( SECTION, "parseInt("+HEX_STRING+",16)", HEX_VALUE, parseInt(HEX_STRING,16) ); HEX_VALUE += Math.pow(16,POWER)*15; } for ( HEX_STRING = "0x0", HEX_VALUE = 0, POWER = 0; POWER < 15; POWER++, HEX_STRING = HEX_STRING +"f" ) { new TestCase( SECTION, "parseInt("+HEX_STRING+",null)", HEX_VALUE, parseInt(HEX_STRING,null) ); HEX_VALUE += Math.pow(16,POWER)*15; } for ( HEX_STRING = "0x0", HEX_VALUE = 0, POWER = 0; POWER < 15; POWER++, HEX_STRING = HEX_STRING +"f" ) { new TestCase( SECTION, "parseInt("+HEX_STRING+", void 0)", HEX_VALUE, parseInt(HEX_STRING, void 0) ); HEX_VALUE += Math.pow(16,POWER)*15; } // a few tests with spaces for ( var space = " ", HEX_STRING = "0x0", HEX_VALUE = 0, POWER = 0; POWER < 15; POWER++, HEX_STRING = HEX_STRING +"f", space += " ") { new TestCase( SECTION, "parseInt("+space+HEX_STRING+space+", void 0)", HEX_VALUE, parseInt(space+HEX_STRING+space, void 0) ); HEX_VALUE += Math.pow(16,POWER)*15; } // a few tests with negative numbers for ( HEX_STRING = "-0x0", HEX_VALUE = 0, POWER = 0; POWER < 15; POWER++, HEX_STRING = HEX_STRING +"f" ) { new TestCase( SECTION, "parseInt("+HEX_STRING+")", HEX_VALUE, parseInt(HEX_STRING) ); HEX_VALUE -= Math.pow(16,POWER)*15; } // we should stop parsing when we get to a value that is not a numeric literal for the type we expect for ( HEX_STRING = "0x0", HEX_VALUE = 0, POWER = 0; POWER < 15; POWER++, HEX_STRING = HEX_STRING +"f" ) { new TestCase( SECTION, "parseInt("+HEX_STRING+"g,16)", HEX_VALUE, parseInt(HEX_STRING+"g",16) ); HEX_VALUE += Math.pow(16,POWER)*15; } for ( HEX_STRING = "0x0", HEX_VALUE = 0, POWER = 0; POWER < 15; POWER++, HEX_STRING = HEX_STRING +"f" ) { new TestCase( SECTION, "parseInt("+HEX_STRING+"g,16)", HEX_VALUE, parseInt(HEX_STRING+"G",16) ); HEX_VALUE += Math.pow(16,POWER)*15; } for ( HEX_STRING = "-0x0", HEX_VALUE = 0, POWER = 0; POWER < 15; POWER++, HEX_STRING = HEX_STRING +"f" ) { new TestCase( SECTION, "parseInt("+HEX_STRING+")", HEX_VALUE, parseInt(HEX_STRING) ); HEX_VALUE -= Math.pow(16,POWER)*15; } for ( HEX_STRING = "-0X0", HEX_VALUE = 0, POWER = 0; POWER < 15; POWER++, HEX_STRING = HEX_STRING +"f" ) { new TestCase( SECTION, "parseInt("+HEX_STRING+")", HEX_VALUE, parseInt(HEX_STRING) ); HEX_VALUE -= Math.pow(16,POWER)*15; } for ( HEX_STRING = "-0x0", HEX_VALUE = 0, POWER = 0; POWER < 15; POWER++, HEX_STRING = HEX_STRING +"f" ) { new TestCase( SECTION, "parseInt("+HEX_STRING+",16)", HEX_VALUE, parseInt(HEX_STRING,16) ); HEX_VALUE -= Math.pow(16,POWER)*15; } for ( HEX_STRING = "-0x0", HEX_VALUE = 0, POWER = 0; POWER < 15; POWER++, HEX_STRING = HEX_STRING +"f" ) { new TestCase( SECTION, "parseInt("+HEX_STRING+",16)", HEX_VALUE, parseInt(HEX_STRING,16) ); HEX_VALUE -= Math.pow(16,POWER)*15; } // let us do some octal tests. numbers that start with 0 and do not provid a radix should // default to using "0" as a radix. var OCT_STRING = "0"; var OCT_VALUE = 0; for ( OCT_STRING = "0", OCT_VALUE = 0, POWER = 0; POWER < 15; POWER++, OCT_STRING = OCT_STRING +"7" ) { new TestCase( SECTION, "parseInt("+OCT_STRING+")", OCT_VALUE, parseInt(OCT_STRING) ); OCT_VALUE += Math.pow(8,POWER)*7; } for ( OCT_STRING = "-0", OCT_VALUE = 0, POWER = 0; POWER < 15; POWER++, OCT_STRING = OCT_STRING +"7" ) { new TestCase( SECTION, "parseInt("+OCT_STRING+")", OCT_VALUE, parseInt(OCT_STRING) ); OCT_VALUE -= Math.pow(8,POWER)*7; } // should get the same results as above if we provid the radix of 8 (or 010) for ( OCT_STRING = "0", OCT_VALUE = 0, POWER = 0; POWER < 15; POWER++, OCT_STRING = OCT_STRING +"7" ) { new TestCase( SECTION, "parseInt("+OCT_STRING+",8)", OCT_VALUE, parseInt(OCT_STRING,8) ); OCT_VALUE += Math.pow(8,POWER)*7; } for ( OCT_STRING = "-0", OCT_VALUE = 0, POWER = 0; POWER < 15; POWER++, OCT_STRING = OCT_STRING +"7" ) { new TestCase( SECTION, "parseInt("+OCT_STRING+",010)", OCT_VALUE, parseInt(OCT_STRING,010) ); OCT_VALUE -= Math.pow(8,POWER)*7; } // we shall stop parsing digits when we get one that isn't a numeric literal of the type we think // it should be. for ( OCT_STRING = "0", OCT_VALUE = 0, POWER = 0; POWER < 15; POWER++, OCT_STRING = OCT_STRING +"7" ) { new TestCase( SECTION, "parseInt("+OCT_STRING+"8,8)", OCT_VALUE, parseInt(OCT_STRING+"8",8) ); OCT_VALUE += Math.pow(8,POWER)*7; } for ( OCT_STRING = "-0", OCT_VALUE = 0, POWER = 0; POWER < 15; POWER++, OCT_STRING = OCT_STRING +"7" ) { new TestCase( SECTION, "parseInt("+OCT_STRING+"8,010)", OCT_VALUE, parseInt(OCT_STRING+"8",010) ); OCT_VALUE -= Math.pow(8,POWER)*7; } new TestCase( SECTION, "parseInt( '0x' )", NaN, parseInt("0x") ); new TestCase( SECTION, "parseInt( '0X' )", NaN, parseInt("0X") ); new TestCase( SECTION, "parseInt( '11111111112222222222' )", 11111111112222222222, parseInt("11111111112222222222") ); new TestCase( SECTION, "parseInt( '111111111122222222223' )", 111111111122222222220, parseInt("111111111122222222223") ); new TestCase( SECTION, "parseInt( '11111111112222222222',10 )", 11111111112222222222, parseInt("11111111112222222222",10) ); new TestCase( SECTION, "parseInt( '111111111122222222223',10 )", 111111111122222222220, parseInt("111111111122222222223",10) ); new TestCase( SECTION, "parseInt( '01234567890', -1 )", Number.NaN, parseInt("01234567890",-1) ); new TestCase( SECTION, "parseInt( '01234567890', 0 )", Number.NaN, parseInt("01234567890",1) ); new TestCase( SECTION, "parseInt( '01234567890', 1 )", Number.NaN, parseInt("01234567890",1) ); new TestCase( SECTION, "parseInt( '01234567890', 2 )", 1, parseInt("01234567890",2) ); new TestCase( SECTION, "parseInt( '01234567890', 3 )", 5, parseInt("01234567890",3) ); new TestCase( SECTION, "parseInt( '01234567890', 4 )", 27, parseInt("01234567890",4) ); new TestCase( SECTION, "parseInt( '01234567890', 5 )", 194, parseInt("01234567890",5) ); new TestCase( SECTION, "parseInt( '01234567890', 6 )", 1865, parseInt("01234567890",6) ); new TestCase( SECTION, "parseInt( '01234567890', 7 )", 22875, parseInt("01234567890",7) ); new TestCase( SECTION, "parseInt( '01234567890', 8 )", 342391, parseInt("01234567890",8) ); new TestCase( SECTION, "parseInt( '01234567890', 9 )", 6053444, parseInt("01234567890",9) ); new TestCase( SECTION, "parseInt( '01234567890', 10 )", 1234567890, parseInt("01234567890",10) ); // need more test cases with hex radix new TestCase( SECTION, "parseInt( '1234567890', '0xa')", 1234567890, parseInt("1234567890","0xa") ); new TestCase( SECTION, "parseInt( '012345', 11 )", 17715, parseInt("012345",11) ); new TestCase( SECTION, "parseInt( '012345', 35 )", 1590195, parseInt("012345",35) ); new TestCase( SECTION, "parseInt( '012345', 36 )", 1776965, parseInt("012345",36) ); new TestCase( SECTION, "parseInt( '012345', 37 )", Number.NaN, parseInt("012345",37) ); test();