/**************************************************************************** ** ** Copyright (C) 2016 The Qt Company Ltd. ** Contact: https://www.qt.io/licensing/ ** ** This file is part of the test suite of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:GPL-EXCEPT$ ** Commercial License Usage ** Licensees holding valid commercial Qt licenses may use this file in ** accordance with the commercial license agreement provided with the ** Software or, alternatively, in accordance with the terms contained in ** a written agreement between you and The Qt Company. For licensing terms ** and conditions see https://www.qt.io/terms-conditions. For further ** information use the contact form at https://www.qt.io/contact-us. ** ** GNU General Public License Usage ** Alternatively, this file may be used under the terms of the GNU ** General Public License version 3 as published by the Free Software ** Foundation with exceptions as appearing in the file LICENSE.GPL3-EXCEPT ** included in the packaging of this file. Please review the following ** information to ensure the GNU General Public License requirements will ** be met: https://www.gnu.org/licenses/gpl-3.0.html. ** ** $QT_END_LICENSE$ ** ****************************************************************************/ //TESTED_COMPONENT=qtdeclarative testcase = { using_section_delegates: function() { // Test Meta-data testTitle = "Using and changing section delegate properties"; testBinary = "sections.qml"; testSource: "$QTDIR/qtdeclarative/tests/system/listview"; testGoal = "Verify that a Component can be set as a section header, using various properties for different collections."; testPreconditions = "None"; testGroups = "BAT,QtQuick 2.0"; // Test Steps prompt(twiki('---+++ ' + testTitle + '

*Goal:* ' + testGoal + '
*Pre-Requisites:* ' + testPreconditions + '
*Tested Binary:* ' + testBinary + '
| *Step* | *Verification* | | Run '+testBinary+' | Application has started, showing a ListView | | | The view shows a single character section header for each element | | Press the Criteria button | The section headers now show the full name of each item | | Press Property | The section headers now show the id value for the items | | Press Criteria | The section headers now only show i - the first character of id | | Press Property | The section headers show the first character of the item names |')); }, updating_sections: function() { // Test Meta-data testTitle = "Updating Collected Sections"; testBinary = "sections.qml"; testSource: "$QTDIR/qtdeclarative/tests/system/listview"; testGoal = "Verify that a section is updated when items are added."; testPreconditions = "None"; testGroups = "BAT,QtQuick 2.0"; // Test Steps prompt(twiki('---+++ ' + testTitle + '

*Goal:* ' + testGoal + '
*Pre-Requisites:* ' + testPreconditions + '
*Tested Binary:* ' + testBinary + '
| *Step* | *Verification* | | Run '+testBinary+' | Application has started, showing a ListView | | | The view shows a single character section header for each element | | Press the + button | A duplicate of every name is added | | | Each duplicate is place in the same section as the original |')); }, changing_section_delegates: function() { // Test Meta-data testTitle = "Changing Section Delegates"; testBinary = "sections.qml"; testSource: "$QTDIR/qtdeclarative/tests/system/listview"; testGoal = "Verify that a section delegate can be changed."; testPreconditions = "None"; testGroups = "BAT,QtQuick 2.0"; // Test Steps prompt(twiki('---+++ ' + testTitle + '

*Goal:* ' + testGoal + '
*Pre-Requisites:* ' + testPreconditions + '
*Tested Binary:* ' + testBinary + '
| *Step* | *Verification* | | Run '+testBinary+' | Application has started, showing a ListView | | | The view shows a single character section header for each element | | Press the Delegate button | The section headers now show as light blue rectangles | | Press the Criteria button | The headers show as full names, still within light blue rectangles |')); }, altering_listview_primary_properties: function() { // Test Meta-data testTitle = "Altering ListView primary properties"; testBinary = "alteredViews.qml"; testSource: "$QTDIR/qtdeclarative/tests/system/listview"; testGoal = "Verify that the model and delegate for a ListView can be changed"; testPreconditions = "None"; testGroups = "BAT,QtQuick 2.0"; // Test Steps prompt(twiki('---+++ ' + testTitle + '

*Goal:* ' + testGoal + '
*Pre-Requisites:* ' + testPreconditions + '
*Tested Binary:* ' + testBinary + '
| *Step* | *Verification* | | Run '+testBinary+' | Application has started, showing a ListView | | | The view shows items named Model1_1 - 5, and the delegates are white with a black border | | Press the Mod button | The view now shows items named Model2_1 - 5 | | Press Del | The delegates are now golden with a black border | | Press Mod, then Del | The view again shows items named Model1_1 - 5, and are white |')); }, altering_listview_orientation: function() { // Test Meta-data testTitle = "Altering ListView orientation"; testBinary = "alteredViews.qml"; testSource: "$QTDIR/qtdeclarative/tests/system/listview"; testGoal = "Verify that the orientation of a listview can be changed at runtime"; testPreconditions = "None"; testGroups = "BAT,QtQuick 2.0"; // Test Steps prompt(twiki('---+++ ' + testTitle + '

*Goal:* ' + testGoal + '
*Pre-Requisites:* ' + testPreconditions + '
*Tested Binary:* ' + testBinary + '
| *Step* | *Verification* | | Run '+testBinary+' | Application has started, showing a ListView | | | The view shows items named Model1_1 - 5, and the delegates are white with a black border | | Press the Ori button | The view is now displayed in a horizontal orientation | | | The delegates should have resized quickly and smoothly, and the text rotated anticlockwise (both animated) | | Press Del | The delegates are now golden with a black border, still in horizontal orientation | | Press Ori | The view again shows in a vertical orientation, with the golden delegates |')); }, basic_view_transition: function() { // Test Meta-data testTitle = "Basic View Transitions"; testBinary = "viewTransitions.qml"; testSource: "$QTDIR/qtdeclarative/tests/system/listview"; testGoal = "Verify a basic transition can be applied to a ListView action"; testPreconditions = "None"; testGroups = "BAT,QtQuick 2.0"; testRequirements = "QTBUG-21504: Enable transitions for add/move/remove operations on views"; // Test Steps prompt(twiki('---+++ ' + testTitle + '

*Goal:* ' + testGoal + '
*Pre-Requisites:* ' + testPreconditions + '
*Tested Binary:* ' + testBinary + '
| *Step* | *Verification* | | Run '+testBinary+' | Application has started, showing a ListView | | Press the Set A button | The Set A button shows green | | Press Add | A new yellow item fades in after the currently selected item | | | The other items slide down, with a slight delay for each item, giving it a flowing effect | | Select the new item | | | Press To Top | The item changes to light blue and moves to the top, curving out to the right of the ListView | | Select an item near the top and press Remove | The selected item fades out | | | The other items slide up, with a slight delay for each item, giving it a flowing effect |')); }, switching_view_transition: function() { // Test Meta-data testTitle = "Switching View Transitions"; testBinary = "viewTransitions.qml"; testSource: "$QTDIR/qtdeclarative/tests/system/listview"; testGoal = "Verify a basic ListView transition can be changed to another"; testPreconditions = "None"; testGroups = "BAT,QtQuick 2.0"; testRequirements = "QTBUG-21504: Enable transitions for add/move/remove operations on views"; // Test Steps prompt(twiki('---+++ ' + testTitle + '

*Goal:* ' + testGoal + '
*Pre-Requisites:* ' + testPreconditions + '
*Tested Binary:* ' + testBinary + '
| *Step* | *Verification* | | Run '+testBinary+' | Application has started, showing a ListView | | Press the Set A button | The Set A button shows green | | Press Add | A new yellow item fades in after the currently selected item | | | The other items slide down, with a slight delay for each item, giving it a flowing effect | | Select the new item | | | Press To Top | The item changes to light blue and moves to the top, curving out to the right of the ListView | | Select an item near the top and press Remove | The selected item fades out | | | The other items slide up, with a slight delay for each item, giving it a flowing effect | | Press the Set B button | The Set B button shows green | | Press Add | A new yellow item pops in after the currently selected item | | | The other items tumble down in a disorderly manner | | Select the new item | | | Press To Top | The item changes from red to light blue and curves out to the right of the ListView, bouncing in at the top | | Select an item near the top and press Remove | The selected item pops out | | | The other items slide up, with a slight delay for each item, giving it a flowing effect |')); }, different_transitions_for_every_operation: function() { // Test Meta-data testTitle = "Different Transitions for all Operations"; testBinary = "viewTransitions.qml"; testSource: "$QTDIR/qtdeclarative/tests/system/listview"; testGoal = "Verify a different Transition can be applied to displacement from adding, moving and removing."; testPreconditions = "None"; testGroups = "BAT,QtQuick 2.0"; testRequirements = "QTBUG-21504: Enable transitions for add/move/remove operations on views"; // Test Steps prompt(twiki('---+++ ' + testTitle + '

*Goal:* ' + testGoal + '
*Pre-Requisites:* ' + testPreconditions + '
*Tested Binary:* ' + testBinary + '
| *Step* | *Verification* | | Run '+testBinary+' | Application has started, showing a ListView | | Press the Set C button | The Set C button shows green | | Press Add | A new yellow item swoops in from the side | | | The other items jitter down, with a slight delay for each item | | Select the new item | | | Press To Top | The item changes from red to light blue and moves to the top, curving out to the right of the ListView | | | The other items bounce down in a solid block | | Select an item near the top and press Remove | The selected item fades out in a flashing manner | | | The other items snap up, with a slight delay for each item | | Press the Append button a few times | Each added item swoops in from alternating sides | ')); }, delegates_and_effects: function() { testTitle = "Delegates and effects"; testBinary = "viewTransitions.qml"; testSource: "$QTDIR/qtdeclarative/tests/system/listview"; testGoal = "Verify a delegate in transition can show effects."; testPreconditions = "None"; testGroups = "BAT,QtQuick 2.0"; testRequirements = "QTBUG-21504: Enable transitions for add/move/remove operations on views"; // Test Steps prompt(twiki('---+++ ' + testTitle + '

*Goal:* ' + testGoal + '
*Pre-Requisites:* ' + testPreconditions + '
*Tested Binary:* ' + testBinary + '
| *Step* | *Verification* | | Run '+testBinary+' | Application has started, showing a ListView | | Press the Set D button | The Set D button shows green | | Select a lower item | The item is highlighted | | Press To Top | The item fades to red particles, shifts to the top, and fades back to a normal delegate | | | The other items shuffle down |')); }, attached_onremove_property: function() { testTitle = "Using the attached onRemove property"; testBinary = "onRemove.qml"; testSource: "$QTDIR/qtdeclarative/tests/system/listview"; testGoal = "Verify the onRemove attached property can be assigned."; testPreconditions = "None"; testGroups = "BAT,QtQuick 2.0"; testRequirements = "QTBUG-21504: Enable transitions for add/move/remove operations on views"; // Test Steps prompt(twiki('---+++ ' + testTitle + '

*Goal:* ' + testGoal + '
*Pre-Requisites:* ' + testPreconditions + '
*Tested Binary:* ' + testBinary + '
| *Step* | *Verification* | | Run '+testBinary+' | Application has started, showing a ListView | | Press the - button | The selected item disappears in a shower of sparks |')); } }