Merge remote-tracking branch 'origin/5.7' into dev

* origin/5.7:
  Doc: Document QtDeviceUtilities
  Doc: Remove rest of the generic Qt for Device Creation doc files
  Doc: Bump version to 5.7.1
  Doc: Remove generic Device Creation documentation
  Added additional instructions for Windows users using BeagleBone Black
  Fixes to networkSettingsService model handling
  Updated icons
  Doc: Add documentation for NVIDIA DRIVE CX
  Doc: Add documentation for Intel NUC
  Doc: Remove references to SILICA ArchiTech Tibidabo
  Doc: Bump version to 5.7.0
  Fixed connman backend crashes and changed it as default.

Conflicts:
	src/doc/src/qtee-changelog.qdoc
	src/doc/src/qtee-index.qdoc
	src/doc/src/qtee-static-linking.qdoc

Change-Id: Idb13f9fd130211213434576ab5cc3d38766e9711

1 files changed, 0 insertions, 137 deletions

diff --git a/src/doc/src/devices/qtee-bd-sl-imx6.qdoc b/src/doc/src/devices/qtee-bd-sl-imx6.qdoc
deleted file mode 100644
index 6aa39ac..0000000
--- a/src/doc/src/devices/qtee-bd-sl-imx6.qdoc
+++ /dev/null
@@ -1,137 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2014 Digia Plc
-** All rights reserved.
-** For any questions to Digia, please use the contact form at
-** http://www.qt.io
-**
-** This file is part of Qt Enterprise Embedded.
-**
-** Licensees holding valid Qt Enterprise licenses may use this file in
-** accordance with the Qt Enterprise License Agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.
-**
-** If you have questions regarding the use of this file, please use
-** the contact form at http://www.qt.io
-**
-****************************************************************************/
-/*!
-    \page qtee-preparing-hardware-imx6.html
-    \title Boundary Devices i.MX6 Boards
-    \previouspage qtee-installation-guide.html
-
-    Take the following steps when preparing these boards for \B2Q:
-
-    \list
-        \li \l{http://boundarydevices.com/products/sabre-lite-imx6-sbc/}
-            {Boundary Devices BD-SL-i.MX6 (SABRE Lite)}
-        \li \l{http://boundarydevices.com/product/nitrogen6x-copy/}
-            {Boundary Devices Nitrogen6X}
-        \li \l{http://boundarydevices.com/product/nitrogen6_lite/}
-            {Boundary Devices Nitrogen6_Lite}
-        \li \l{http://boundarydevices.com/product/nitrogen6max/}
-            {Boundary Devices Nitrogen6_MAX}
-        \li \l{http://boundarydevices.com/product/nitrogen6x-som/}
-            {Boundary Devices Nitrogen6X_SOM}
-    \endlist
-
-    \note It is important that you repeat the steps in this section after you
-    update \SDK.
-
-    The images containing the \B2Q stack for the device are included
-    in \SDK, ready to be copied to an SD card.
-
-    \section1 Preparing an SD Card
-
-    For \B2QL, an SD card of at least 1 GB capacity is needed.
-
-    \include detect-sd-card-device-name.qdocinc instructions
-
-    \section1 Installing the \B2Q Image
-
-    \include common.qdocinc wizard
-
-    Make sure you have the required tools installed in your development machine:
-
-    \badcode
-        sudo apt-get install u-boot-tools
-    \endcode
-
-    Then, upgrade the SD card with \B2Q. First, ensure that no partitions on the
-    SD card are mounted:
-
-    \include detect-sd-card-device-name.qdocinc unmount
-
-    Then, use the following command to install the embedded Linux image:
-
-    \badcode
-        cd <INSTALL_DIR>
-        sudo dd bs=4k if=5.6/Boot2Qt/nitrogen6x/images/b2qt-embedded-qt5-image-nitrogen6x.img of=/dev/<device_name>
-    \endcode
-
-    After the installation is complete, insert the SD card, power on the device and check that
-    the \B2Q welcome screen and/or demo appear.
-
-    \b {Updating U-Boot}
-
-    If you are updating from an older image, you may also need to update the version of U-Boot on the device.
-    The prebuilt image already contains U-Boot versions for most of the device variants from Boundary Devices,
-    but the update needs to be done manually when first starting the device. Correct device type is selected by
-    setting the \c uboot_defconfig U-Boot environment variable. More information available from
-    \l{https://boundarydevices.com/compiling-latest-u-boot-for-i-mx6-2015-edition/}{Boundary Devices}.
-
-    Access the device's console and run the following commands on the U-Boot prompt:
-
-    \badcode
-        setenv uboot_defconfig <device type>
-        run upgradeu
-    \endcode
-
-    Reset or power cycle the device to start the new U-Boot.
-    To reset the U-Boot environment to new default values, enter the following commands
-    in the U-Boot command line
-
-    \badcode
-        env default -a
-        saveenv
-    \endcode
-
-    \b {Setup for Nitrogen6_Lite Device}
-
-    The boot script requires the environment variables, \c dtbname and \c gpumem, to identify
-    the device as Nitrogen6_Lite. Otherwise, the device is booted with the default GPU
-    memory setting of 512MiB, which is more than what is available on the Nitrogen_Lite devices
-    (128MibB).
-
-    Use one of the two following options to enable the scripts boot the device
-    with correct GPU memory setting:
-
-    \list
-     \li Write a \c uEnv.txt file on to the boot partition of SD card with the following
-         content:
-
-         \badcode
-             gpumem=67108864
-             dtbname=imx6dl-nit6xlite.dtb
-         \endcode
-
-     \li Access the device's console and run the following commands on the U-Boot prompt:
-         \badcode
-             U-Boot > setenv gpumem 67108864
-             U-Boot > setenv dtbname imx6dl-nit6xlite.dtb
-             U-Boot > saveenv
-         \endcode
-    \endlist
-
-    \section1 Setting up USB Access
-
-    \include b2qt-post-install-setup.qdocinc setting up usb access
-
-    \section1 Configuring a Device Kit in Qt Creator
-
-    \include b2qt-post-install-setup.qdocinc configuring device kit linux
-
-    You are now ready to start developing for your device. For more information,
-    see \l{Building and Running an Example}.
-*/