path: root/src/doc/src/devices/qtee-sabre-sd-imx6.qdoc
diff options
authorTopi Reinio <>2016-08-30 10:52:27 +0200
committerTopi Reiniƶ <>2016-09-01 08:02:31 +0000
commiteebda51556daae681e9ddb878c36f79e497f5618 (patch)
treecdea68759f5ca59fee027b9ce75ad92d7825fe54 /src/doc/src/devices/qtee-sabre-sd-imx6.qdoc
parentf10a492c8711d881da99554ca9a9fcd988080d3a (diff)
Doc: Remove generic Device Creation documentation
... and replace the documentation configuration with a one specific to Boot to Qt Utils. The removed documentation is available in a dedicated repository, tqtc-boot2qt/doc. The name of this module in 5.6 branch will be 'Qt for Device Creation: Add-On Modules'. The doc namespace and config files already reflect the name 'Qt Device Utilities', but that is not visible to the user in 5.6 (but will be in 5.7). Change-Id: Ib5a98d57b6ff5e7c29901f42697266f396abad82 Reviewed-by: Samuli Piippo <>
Diffstat (limited to 'src/doc/src/devices/qtee-sabre-sd-imx6.qdoc')
1 files changed, 0 insertions, 71 deletions
diff --git a/src/doc/src/devices/qtee-sabre-sd-imx6.qdoc b/src/doc/src/devices/qtee-sabre-sd-imx6.qdoc
deleted file mode 100644
index 86f696f..0000000
--- a/src/doc/src/devices/qtee-sabre-sd-imx6.qdoc
+++ /dev/null
@@ -1,71 +0,0 @@
-** Copyright (C) 2014 Digia Plc
-** All rights reserved.
-** For any questions to Digia, please use the contact form at
-** This file is part of Qt Enterprise Embedded.
-** Licensees holding valid Qt Enterprise licenses may use this file in
-** accordance with the Qt Enterprise License Agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.
-** If you have questions regarding the use of this file, please use
-** the contact form at
- \keyword SABRE SD i.MX6Quad
- \page qtee-preparing-hardware-imx6sabresd.html
- \title Preparing SABRE SD i.MX6Quad
- \previouspage qtee-installation-guide.html
- Take the following steps to prepare
- \l {}
- {Freescale SABRE SD i.MX6Quad} for \B2Q:
- \note It is important that you repeat the steps in this section after you
- update \SDK.
- The images containing the \B2Q stack for the above devices are included
- in \SDK, ready to be copied to an SD card.
- \section1 Preparing an SD Card
- An SD card of at least 1 GB capacity is sufficient.
- \include detect-sd-card-device-name.qdocinc instructions
- \section1 Installing the \B2Q Image
- \include common.qdocinc wizard
- To write the image to the SD card, ensure that no partitions on the
- SD card are mounted:
- \include detect-sd-card-device-name.qdocinc unmount
- To deploy the image, enter the following commands:
- \badcode
- sudo dd bs=4k if=5.6/Boot2Qt/imx6qsabresd/images/b2qt-embedded-qt5-image-imx6qsabresd.img of=/dev/<device_name>
- \endcode
- After the image has been deployed, insert the SD card, power on the device and check that
- the \B2Q welcome screen and/or demo appear.
- \section1 Setting up USB Access
- \include b2qt-post-install-setup.qdocinc setting up usb access
- \section1 Configuring a Device Kit in Qt Creator
- \include b2qt-post-install-setup.qdocinc configuring device kit
- You are now ready to start developing for your device. For more information,
- see \l{Building and Running an Example}.