summaryrefslogtreecommitdiffstats
path: root/src/doc/src/devices/qtee-toradex-apalis.qdoc
diff options
context:
space:
mode:
authorTopi Reinio <topi.reinio@theqtcompany.com>2016-08-30 10:52:27 +0200
committerTopi Reiniƶ <topi.reinio@theqtcompany.com>2016-09-01 08:02:31 +0000
commiteebda51556daae681e9ddb878c36f79e497f5618 (patch)
treecdea68759f5ca59fee027b9ce75ad92d7825fe54 /src/doc/src/devices/qtee-toradex-apalis.qdoc
parentf10a492c8711d881da99554ca9a9fcd988080d3a (diff)
Doc: Remove generic Device Creation documentation
... and replace the documentation configuration with a one specific to Boot to Qt Utils. The removed documentation is available in a dedicated repository, tqtc-boot2qt/doc. The name of this module in 5.6 branch will be 'Qt for Device Creation: Add-On Modules'. The doc namespace and config files already reflect the name 'Qt Device Utilities', but that is not visible to the user in 5.6 (but will be in 5.7). Change-Id: Ib5a98d57b6ff5e7c29901f42697266f396abad82 Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
Diffstat (limited to 'src/doc/src/devices/qtee-toradex-apalis.qdoc')
-rw-r--r--src/doc/src/devices/qtee-toradex-apalis.qdoc106
1 files changed, 0 insertions, 106 deletions
diff --git a/src/doc/src/devices/qtee-toradex-apalis.qdoc b/src/doc/src/devices/qtee-toradex-apalis.qdoc
deleted file mode 100644
index b6acc6e..0000000
--- a/src/doc/src/devices/qtee-toradex-apalis.qdoc
+++ /dev/null
@@ -1,106 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2014 Digia Plc
-** All rights reserved.
-** For any questions to Digia, please use the contact form at
-** http://www.qt.io
-**
-** This file is part of Qt Enterprise Embedded.
-**
-** Licensees holding valid Qt Enterprise licenses may use this file in
-** accordance with the Qt Enterprise License Agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.
-**
-** If you have questions regarding the use of this file, please use
-** the contact form at http://www.qt.io
-**
-****************************************************************************/
-/*!
- \keyword Toradex Apalis iMX6
- \page qtee-preparing-hardware-apalis-imx6.html
- \title Preparing Toradex Apalis iMX6
- \previouspage qtee-installation-guide.html
-
- Take the following steps to prepare a
- \l{http://www.toradex.com/products/apalis-arm-computer-modules/freescale-imx-6-computer-module}
- {Toradex Apalis iMX6} for \B2Q.
-
- \note It is important that you repeat the steps in this section after you
- update \SDK.
-
- The images containing the \B2Q stack for Toradex Apalis iMX6 are included
- in \SDK, ready to be copied to an SD card.
-
- \section1 Preparing an SD Card
-
- An SD card of at least 1 GB capacity is sufficient.
-
- \include detect-sd-card-device-name.qdocinc instructions
-
- \section1 Installing the \B2Q Image
-
- \include common.qdocinc wizard
-
- To write the image to the SD card, ensure that no partitions on the
- SD card are mounted:
-
- \include detect-sd-card-device-name.qdocinc unmount
-
- Then,
-
- \badcode
- cd <INSTALL_DIR>
- sudo dd bs=4k if=5.6/Boot2Qt/apalis-imx6/images/b2qt-embedded-qt5-image-apalis-imx6.img of=/dev/<device_name>
- \endcode
-
- By default, the Toradex Apalis iMX6 boots from its internal eMMC. In order to boot from
- the external SD card, the U-Boot needs to be updated. Connect a serial cable
- to the device and enter into the U-Boot environment by pressing any key before the autoboot.
- Enter following commands into U-Boot:
-
- \badcode
- setenv drive 2
- setenv setupdate 'fatload mmc ${drive}:1 ${loadaddr} flash_mmc.img; source'
-
- run setupdate
- run update_uboot
- \endcode
-
- Reset or power cycle the device to start the new U-Boot.
- To reset the U-Boot environment to new default values, enter the following commands
- in the U-Boot command line
-
- \badcode
- env default -a
- saveenv
- \endcode
-
-
- New U-Boot commands are now stored into the device, and you can start \B2Q. For more information
- about the boot process on Toredex Apalis iMX6, see
- \l{http://developer.toradex.com/software-resources/arm-family/linux/linux-booting}{Toradex Linux Booting}.
-
- After the image has been deployed, insert the SD card, power on the device and check that
- the \B2Q welcome screen and/or demo appear.
-
- \section1 Setting up USB Access
-
- The \e {Ixora Carrier Board} on Toradex Apalis iMX6 includes a USB 2.0 port
- that can be used for an \c adb connection between the device and the
- development host, provided it's configured for USB OTG. To enable USB OTG
- connectivity, ensure that jumper JP2, located next to the USB ports, is open.
-
- For more information, see datasheet for
- \l{https://www.toradex.com/products/carrier-boards/ixora-carrier-board}
- {Ixora Carrier Board}.
-
- \include b2qt-post-install-setup.qdocinc setting up usb access
-
- \section1 Configuring a Device Kit in Qt Creator
-
- \include b2qt-post-install-setup.qdocinc configuring device kit
-
- You are now ready to start developing for your device. For more information,
- see \l{Building and Running an Example}.
-*/