Doc: Remove BeagleBoard-xM device

Hasn't been supported since 2.x.
Listed under Legacy Reference Devices.

Change-Id: I16773eac6429b82bf90f4e9f50416bea567d8498
Reviewed-by: Kalle Viironen <kalle.viironen@theqtcompany.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>

3 files changed, 0 insertions, 71 deletions

diff --git a/src/doc/src/devices/qtee-beagleboard-xm.qdoc b/src/doc/src/devices/qtee-beagleboard-xm.qdoc
deleted file mode 100644
index bbd3f0a..0000000
--- a/src/doc/src/devices/qtee-beagleboard-xm.qdoc
+++ /dev/null
@@ -1,69 +0,0 @@
-/****************************************************************************
-**
-** Copyright (C) 2014 Digia Plc
-** All rights reserved.
-** For any questions to Digia, please use the contact form at
-** http://www.qt.io
-**
-** This file is part of Qt Enterprise Embedded.
-**
-** Licensees holding valid Qt Enterprise licenses may use this file in
-** accordance with the Qt Enterprise License Agreement provided with the
-** Software or, alternatively, in accordance with the terms contained in
-** a written agreement between you and Digia.
-**
-** If you have questions regarding the use of this file, please use
-** the contact form at http://www.qt.io
-**
-****************************************************************************/
-/*!
-    \target BeagleBoard-xM (embedded Linux)
-    \page qtee-preparing-hardware-beagleboard.html
-    \title Preparing BeagleBoard-xM
-    \previouspage qtee-installation-guide.html
-    \nextpage qtee-building-and-running.html
-
-    Take the following steps to prepare a \l{http://beagleboard.org/hardware-xM}
-    {BeagleBoard-xM} for
-    \B2Q.
-
-    \note BeagleBoard-xM is no longer supported in \SDK 3.0. It is still,
-    however, supported and tested under the previous 2.x versions.
-
-    The image containing \B2Q stack for BeagleBoard-xM are included in \SDK,
-    ready to be copied to an SD card.
-
-    \section1 Preparing an SD Card
-
-    An SD card of at least 1 GB capacity is needed.
-
-    \include detect-sd-card-device-name.qdocinc instructions
-
-    \section1 Installing the \B2Q Image
-
-    To write the image to the SD card, ensure that no partitions on the
-    SD card are mounted:
-
-    \include detect-sd-card-device-name.qdocinc unmount
-
-    Then,
-
-    \badcode
-        cd <INSTALL_DIR>
-        sudo Boot2Qt-4.x/beagleboard-eLinux/images/deploy.sh /dev/<device_name>
-    \endcode
-
-    After the image has been deployed, power on the device and check that
-    the \B2Q welcome screen and/or demo appear.
-
-    \section1 Setting up USB Access
-
-    \include b2qt-post-install-setup.qdocinc setting up usb access
-
-    \section1 Configuring a Device Kit in Qt Creator
-
-    \include b2qt-post-install-setup.qdocinc configuring device kit
-
-    You are now ready to start developing for your device. For more information,
-    see \l{Building and Running an Example}.
-*/
diff --git a/src/doc/src/devices/qtee-supported-devices.qdoc b/src/doc/src/devices/qtee-supported-devices.qdoc
index b9b0ea3..78e5d42 100644
--- a/src/doc/src/devices/qtee-supported-devices.qdoc
+++ b/src/doc/src/devices/qtee-supported-devices.qdoc
@@ -34,7 +34,6 @@
         \li \l{Toradex Apalis iMX6 (embedded Linux)}
         \li \l{ArchiTech Tibidabo (embedded Linux)}
         \li \l{BeagleBone Black (embedded Linux)}
-        \li \l{BeagleBoard-xM (embedded Linux)}
         \li \l{Raspberry Pi Model B (embedded Linux)}
     \endlist
 
diff --git a/src/doc/src/qtee-index.qdoc b/src/doc/src/qtee-index.qdoc
index 3e75638..c978416 100644
--- a/src/doc/src/qtee-index.qdoc
+++ b/src/doc/src/qtee-index.qdoc
@@ -50,7 +50,6 @@
             \li \l{Preparing Toradex Apalis iMX6}{Toradex Apalis iMX6 (embedded Linux)}
             \li \l{Preparing ArchiTech Tibidabo}{ArchiTech Tibidabo (embedded Linux)}
             \li \l{Preparing BeagleBone Black}{BeagleBone Black (embedded Linux)}
-            \li \l{Preparing BeagleBoard-xM}{BeagleBoard-xM (embedded Linux)}
             \li \l{Preparing Raspberry Pi}{Raspberry Pi Model B (embedded Linux)}
         \endlist
         \li \l{Building and Running Embedded Applications}