diff options
| -rw-r--r-- | src/doc/src/devices/qtee-toradex-colibri-vf.qdoc | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/src/doc/src/devices/qtee-toradex-colibri-vf.qdoc b/src/doc/src/devices/qtee-toradex-colibri-vf.qdoc index 5c01753..c41728e 100644 --- a/src/doc/src/devices/qtee-toradex-colibri-vf.qdoc +++ b/src/doc/src/devices/qtee-toradex-colibri-vf.qdoc @@ -56,14 +56,14 @@ sudo Boot2Qt-4.x/colibri-vf-eLinux/images/deploy.sh /dev/<device_name> \endcode - By default, the Toradex Colibri-VF devices boot from their internal eMMC. In order to boot from + By default, the Toradex Colibri VF devices boot from their internal NAND memory. In order to boot from an external SD card, the U-Boot needs to be modified. Connect a serial cable to the device and enter into the U-Boot environment by pressing any key before the autoboot. Enter following commands into U-Boot: \badcode set bootcmd 'run sdboot; run ubiboot; run nfsboot;' - set sdboot 'run setup; setenv bootargs ${defargs} ${mmcargs} ${mtdparts} ${setupargs} ${vidargs}; echo Booting from MMC/SD card...; mmc part 0; fatload mmc 0:1 ${loadaddr} zImage && bootz' + set sddtbload 'setenv dtbparam; load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && setenv dtbparam ${fdt_addr_r}' save \endcode |