diff options
Diffstat (limited to 'src/doc/src/detect-sd-card-device-name.qdocinc')
-rw-r--r-- | src/doc/src/detect-sd-card-device-name.qdocinc | 45 |
1 files changed, 45 insertions, 0 deletions
diff --git a/src/doc/src/detect-sd-card-device-name.qdocinc b/src/doc/src/detect-sd-card-device-name.qdocinc new file mode 100644 index 0000000..5f9803b --- /dev/null +++ b/src/doc/src/detect-sd-card-device-name.qdocinc @@ -0,0 +1,45 @@ +/**************************************************************************** +** +** Copyright (C) 2014 Digia Plc +** All rights reserved. +** For any questions to Digia, please use the contact form at +** http://qt.digia.com/ +** +** This file is part of Qt Enterprise Embedded. +** +** Licensees holding valid Qt Enterprise licenses may use this file in +** accordance with the Qt Enterprise License Agreement provided with the +** Software or, alternatively, in accordance with the terms contained in +** a written agreement between you and Digia. +** +** If you have questions regarding the use of this file, please use +** the contact form at http://qt.digia.com/ +** +****************************************************************************/ +/*! +//! [instructions] + Plug in the SD card or reader to the development host, + and use the following command to find out its device name: + + \code + lsblk -d + \endcode + + Removable devices such as SD cards have the value '1' in + the \e RM column. + + \warning Make sure to select the correct device, because selecting + the wrong one can result in a wiped hard drive. + + Typical device names for SD cards include \c {sdb} and + \c {mmcblk0}. The full device path is \c {/dev/} followed by + the name. + + To make sure that the SD card is not mounted, enter the following + command, where <device_name> is the device name: + + \code + umount /dev/<device_name> + \endcode +//! [instructions] +*/ |