diff options
Diffstat (limited to 'src/doc/src/detect-sd-card-device-name.qdocinc')
| -rw-r--r-- | src/doc/src/detect-sd-card-device-name.qdocinc | 34 |
1 files changed, 26 insertions, 8 deletions
diff --git a/src/doc/src/detect-sd-card-device-name.qdocinc b/src/doc/src/detect-sd-card-device-name.qdocinc index 825be80..40d7f51 100644 --- a/src/doc/src/detect-sd-card-device-name.qdocinc +++ b/src/doc/src/detect-sd-card-device-name.qdocinc @@ -1,27 +1,45 @@ +/**************************************************************************** +** +** Copyright (C) 2013 Digia Plc +** All rights reserved. +** For any questions to Digia, please use the contact form at +** http://qt.digia.com/ +** +** This file is part of Qt Enterprise Embedded. +** +** Licensees holding valid Qt Enterprise licenses may use this file in +** accordance with the Qt Enterprise License Agreement provided with the +** Software or, alternatively, in accordance with the terms contained in +** a written agreement between you and Digia. +** +** If you have questions regarding the use of this file, please use +** the contact form at http://qt.digia.com/ +** +****************************************************************************/ /*! //! [instructions] - Plug the micro-SD card or reader into the development host PC, + Plug in the SD card or reader to the development host, and use the following command to find out its device name: \code lsblk -d \endcode - Removable devices such as SD cards have a value '1' in + Removable devices such as SD cards have the value '1' in the \e RM column. - \warning \b{Make very sure you select the right device. Selecting - the wrong one can result in a wiped hard drive}. + \warning Make sure to select the correct device, because selecting + the wrong one can result in a wiped hard drive. Typical device names for SD cards include \c {sdb} and \c {mmcblk0}. The full device path is \c {/dev/} followed by - the name. Replace \b XXX with the device name in below - instructions. + the name. - Now make sure the micro-SD card is not mounted: + To make sure that the SD card is not mounted, enter the following + command, where <device_name> is the device name: \code - umount /dev/XXX + umount /dev/<device_name> \endcode //! [instructions] */ |