diff options
Diffstat (limited to 'src/doc/src/devices/qtee-beaglebone-black.qdoc')
-rw-r--r-- | src/doc/src/devices/qtee-beaglebone-black.qdoc | 101 |
1 files changed, 101 insertions, 0 deletions
diff --git a/src/doc/src/devices/qtee-beaglebone-black.qdoc b/src/doc/src/devices/qtee-beaglebone-black.qdoc new file mode 100644 index 0000000..360eb6d --- /dev/null +++ b/src/doc/src/devices/qtee-beaglebone-black.qdoc @@ -0,0 +1,101 @@ +/**************************************************************************** +** +** Copyright (C) 2014 Digia Plc +** All rights reserved. +** For any questions to Digia, please use the contact form at +** http://qt.digia.com/ +** +** This file is part of Qt Enterprise Embedded. +** +** Licensees holding valid Qt Enterprise licenses may use this file in +** accordance with the Qt Enterprise License Agreement provided with the +** Software or, alternatively, in accordance with the terms contained in +** a written agreement between you and Digia. +** +** If you have questions regarding the use of this file, please use +** the contact form at http://qt.digia.com/ +** +****************************************************************************/ +/*! + \target BeagleBone Black (embedded Android and Linux) + \page qtee-preparing-hardware-beaglebone.html + \title Preparing BeagleBone Black + \previouspage qtee-installation-guide.html + + Take the following steps to prepare a + \l{http://beagleboard.org/products/beaglebone%20black}{BeagleBone Black} for \B2Q. + + \note It is important that you repeat the steps in this section after you + update \SDK. + + The images containing the \B2Q stack for BeagleBone Black are included + in \SDK, ready to be copied to an SD card. + + \section1 Preparing an SD Card + + For \B2QA, an SD card of at least 2 GB capacity is needed. For \B2QL, + a card of at least 512 MB capacity is sufficient. + + \include detect-sd-card-device-name.qdocinc instructions + + \section1 Installing the Android image + + \e{If installing} \B2QL, \e{you can skip this step and proceed to} + \l{Installing the Boot to Qt Image}. + + Download the package \e{TI_Android_JB_4.2.2_DevKit_4.1.1_beagleboneblack.tar.gz} from + \l{http://downloads.ti.com/sitara_android/esd/TI_Android_DevKit/TI_Android_JB_4_2_2_DevKit_4_1_1/index_FDS.html} + {Texas Instruments} (search for \e {BeagleBone Black} in the list of download packages). + + Use the following commands to create an SD card containing the + downloaded image: + + \list 1 + \li Extract the downloaded package: + \badcode + ~$ tar zxvf ~/Downloads/TI_Android_JB_4.2.2_DevKit_4.1.1_beagleboneblack.tar.gz + \endcode + \li Run beagleboneblack/mkmmc-android.sh: + \badcode + ~$ cd beagleboneblack + ~/beagleboneblack$ sudo ./mkmmc-android.sh /dev/<device_name> + \endcode + \endlist + + \section1 Installing the \B2Q Image + + Then, upgrade the SD card with \B2Q. First, ensure that no partitions on the + SD card are mounted: + + \include detect-sd-card-device-name.qdocinc unmount + + Then, use one of the commands below, depending on whether you are developing + for embedded Android or Linux: + + \list + \li \b{\B2QA} + \badcode + cd <INSTALL_DIR> + ./Boot2Qt-3.x/generic-4.2-eAndroid/images/beaglebone/deploy.sh + \endcode + \li \b{\B2QL} + \badcode + cd <INSTALL_DIR> + sudo ./Boot2Qt-3.x/beaglebone-eLinux/images/deploy.sh /dev/<device_name> + \endcode + \endlist + + After the installation is complete, insert the SD card, power on the device and check that + the \B2Q welcome screen and/or demo appear. + + \section1 Setting up USB Access + + \include b2qt-post-install-setup.qdocinc setting up usb access + + \section1 Configuring a Device Kit in Qt Creator + + \include b2qt-post-install-setup.qdocinc configuring device kit android linux + + You are now ready to start developing for your device. For more information, + see \l{Building and Running an Example}. +*/ |