diff options
Diffstat (limited to 'src/doc/src/devices/qtee-intel-nuc.qdoc')
-rw-r--r-- | src/doc/src/devices/qtee-intel-nuc.qdoc | 75 |
1 files changed, 75 insertions, 0 deletions
diff --git a/src/doc/src/devices/qtee-intel-nuc.qdoc b/src/doc/src/devices/qtee-intel-nuc.qdoc new file mode 100644 index 0000000..7213e3b --- /dev/null +++ b/src/doc/src/devices/qtee-intel-nuc.qdoc @@ -0,0 +1,75 @@ +/**************************************************************************** +** +** Copyright (C) 2016 The Qt Company Ltd. +** All rights reserved. +** For any questions to The Qt Company, please use the contact form at +** http://www.qt.io/contact-us +** +** This file is part of Qt for Device Creation. +** +** Licensees holding valid commercial Qt licenses may use this file in +** accordance with the commercial license agreement provided with the +** Software or, alternatively, in accordance with the terms contained in +** a written agreement between you and The Qt Company. For licensing terms +** and conditions see http://www.qt.io/terms-conditions. For further +** information use the contact form at http://www.qt.io/contact-us. +** +****************************************************************************/ +/*! + \page qtee-preparing-hardware-nuc.html + \title Intel NUC + \previouspage qtee-installation-guide.html + + Take the following steps when preparing an + \l {http://www.intel.com/content/www/us/en/nuc/overview.html}{Intel NUC} + for \B2Q: + + \note It is important that you repeat the steps in this section after you + update \SDK. + + The images containing the \B2Q stack for the device are included + in \SDK. In these instructions, we prepare a USB device (a flash drive + or an external USB hard drive) to boot from. + + \section1 Preparing a USB Boot Device + + For \B2Q, a USB drive of at least 2 GB capacity is needed. + + \include detect-sd-card-device-name.qdocinc instructions-usbdevice + + \section1 Installing the \B2Q Image + + \include common.qdocinc wizard + + Install the \B2Q image onto the USB device. First, ensure that no + partitions are mounted: + + \include detect-sd-card-device-name.qdocinc unmount + + Then, use the following command to install the image: + + \badcode + cd <INSTALL_DIR> + sudo dd bs=4k if=5.7/Automotive/intel-corei7-64/images/b2qt-embedded-qt5-image-intel-corei7-64.img of=/dev/<device_name> + \endcode + + After the installation is complete, connect the USB drive to the device, + power it on, and enter the BIOS setup (\b F2). Follow the instructions on + \l {http://www.intel.com/content/www/us/en/support/boards-and-kits/000005471.html} + {Operating System Installation for IntelĀ® NUC} for how to select the + USB drive as a boot device. + + Press \b F10 to save your changes and exit BIOS setup. After reboot, check that the + \B2Q welcome screen and/or demo appear. + + \section1 Setting up USB Access + + \include b2qt-post-install-setup.qdocinc setting up usb access + + \section1 Configuring a Device Kit in Qt Creator + + \include b2qt-post-install-setup.qdocinc configuring device kit linux + + You are now ready to start developing for your device. For more information, + see \l{Building and Running an Example}. +*/ |