diff options
Diffstat (limited to 'src/doc/src/devices')
| -rw-r--r-- | src/doc/src/devices/qtee-raspberry-pi.qdoc | 12 | ||||
| -rw-r--r-- | src/doc/src/devices/qtee-supported-devices.qdoc | 16 |
2 files changed, 16 insertions, 12 deletions
diff --git a/src/doc/src/devices/qtee-raspberry-pi.qdoc b/src/doc/src/devices/qtee-raspberry-pi.qdoc index 9e58089..d634be2 100644 --- a/src/doc/src/devices/qtee-raspberry-pi.qdoc +++ b/src/doc/src/devices/qtee-raspberry-pi.qdoc @@ -17,19 +17,19 @@ ** ****************************************************************************/ /*! - \keyword Raspberry Pi 2 Model B + \keyword Raspberry Pi 3 Model B \page qtee-preparing-hardware-rasberrypi.html - \title Preparing Raspberry Pi 2 + \title Preparing Raspberry Pi 3 \previouspage qtee-installation-guide.html \nextpage qtee-building-and-running.html - Take the following steps to prepare a \l{https://www.raspberrypi.org/products/raspberry-pi-2-model-b/} - {Raspberry Pi 2} for \B2Q. + Take the following steps to prepare a \l{https://www.raspberrypi.org/products/raspberry-pi-3-model-b/} + {Raspberry Pi 3} for \B2Q. \note It is important that you repeat the steps in this section after you update \SDK. - The image containing \B2Q stack for Raspberry Pi 2 is included in the SDK, + The image containing \B2Q stack for Raspberry Pi 3 is included in the SDK, ready to be copied to an SD card. \section1 Preparing an SD Card @@ -51,7 +51,7 @@ \badcode cd <INSTALL_DIR> - sudo dd bs=4k if=5.6/Boot2Qt/raspberrypi2/images/b2qt-embedded-qt5-image-raspberrypi2.img of=/dev/<device_name> + sudo dd bs=4k if=5.7/Boot2Qt/raspberrypi3/images/b2qt-embedded-qt5-image-raspberrypi3.img of=/dev/<device_name> \endcode After the image has been deployed, insert the SD card, power on the device and check that diff --git a/src/doc/src/devices/qtee-supported-devices.qdoc b/src/doc/src/devices/qtee-supported-devices.qdoc index b78449e..2d730c8 100644 --- a/src/doc/src/devices/qtee-supported-devices.qdoc +++ b/src/doc/src/devices/qtee-supported-devices.qdoc @@ -36,7 +36,7 @@ \li \l{ArchiTech Tibidabo} \li \l{Kontron SMARC-sAMX6i} \li \l{BeagleBone Black} - \li \l{Raspberry Pi 2 Model B} + \li \l{Raspberry Pi 3 Model B} \endlist If you use only the emulator, you can skip this step @@ -155,10 +155,10 @@ {Kontron SMARC-sAMX6i}\br Freescale® i.MX 6 ARM Cortex™-A9 @800MHz - 1.2GHz,\br 2GB DDR3, 2-64GB eMMC, Vivante GC2000 GPU - \row \li \l{https://www.raspberrypi.org/products/raspberry-pi-2-model-b/} - {Raspberry Pi 2 Model B}\br - 900 Mhz ARM Cortex™-A7, Broadcom VideoCore IV\br - @250MHz GPU, 1GB LPDDR2 SDRAM + \row \li \l{https://www.raspberrypi.org/products/raspberry-pi-3-model-b/} + {Raspberry Pi 3 Model B}\br + 1.2 Ghz ARM Cortex™-A53, Broadcom VideoCore IV\br + @400MHz GPU, 1GB LPDDR2 SDRAM \endtable \section2 Group 3 @@ -190,6 +190,10 @@ {Raspberry Pi Model B}\br 700 Mhz ARM11, Broadcom VideoCore IV\br @250MHz GPU, 512 MB (shared with GPU) RAM + \row \li \l{https://www.raspberrypi.org/products/raspberry-pi-2-model-b/} + {Raspberry Pi 2 Model B}\br + 900 Mhz ARM Cortex™-A7, Broadcom VideoCore IV\br + @250MHz GPU, 1GB LPDDR2 SDRAM \endtable \section2 Supported Features on Reference Devices @@ -300,7 +304,7 @@ \li \image ok \li \image ok \li - \row \li Raspberry Pi 2 + \row \li Raspberry Pi 3 \li \image ok \li \image ok \li |