8 files changed, 9 insertions, 9 deletions
diff --git a/src/doc/src/devices/qtee-architech-tibidabo.qdoc b/src/doc/src/devices/qtee-architech-tibidabo.qdoc
index 87d070a..a94f04d 100644
--- a/src/doc/src/devices/qtee-architech-tibidabo.qdoc
+++ b/src/doc/src/devices/qtee-architech-tibidabo.qdoc
@@ -49,7 +49,7 @@
 
     \badcode
         cd <INSTALL_DIR>
-        sudo 5.5/Boot2Qt/tibidabo-eLinux/images/deploy.sh /dev/<device_name>
+        sudo dd bs=4k if=5.6/Boot2Qt/tibidabo/images/b2qt-embedded-qt5-image-tibidabo.img of=/dev/<device_name>
     \endcode
 
     After the installation is complete, insert the SD card, power on the device and check that
diff --git a/src/doc/src/devices/qtee-bd-sl-imx6.qdoc b/src/doc/src/devices/qtee-bd-sl-imx6.qdoc
index 17d5796..e46882a 100644
--- a/src/doc/src/devices/qtee-bd-sl-imx6.qdoc
+++ b/src/doc/src/devices/qtee-bd-sl-imx6.qdoc
@@ -67,7 +67,7 @@
 
     \badcode
         cd <INSTALL_DIR>
-        sudo 5.5/Boot2Qt/nitrogen6x-eLinux/images/deploy.sh /dev/<device_name>
+        sudo dd bs=4k if=5.6/Boot2Qt/nitrogen6x/images/b2qt-embedded-qt5-image-nitrogen6x.img of=/dev/<device_name>
     \endcode
 
     After the installation is complete, insert the SD card, power on the device and check that
diff --git a/src/doc/src/devices/qtee-beaglebone-black.qdoc b/src/doc/src/devices/qtee-beaglebone-black.qdoc
index dc9dce9..cbc8887 100644
--- a/src/doc/src/devices/qtee-beaglebone-black.qdoc
+++ b/src/doc/src/devices/qtee-beaglebone-black.qdoc
@@ -49,7 +49,7 @@
 
     \badcode
         cd <INSTALL_DIR>
-        sudo 5.5/Boot2Qt/beaglebone-eLinux/images/deploy.sh /dev/<device_name>
+        sudo dd bs=4k if=5.6/Boot2Qt/beaglebone/images/b2qt-embedded-qt5-image-beaglebone.img of=/dev/<device_name>
     \endcode
 
     After the installation is complete, insert the SD card, power on the device and check that
diff --git a/src/doc/src/devices/qtee-raspberry-pi.qdoc b/src/doc/src/devices/qtee-raspberry-pi.qdoc
index 4340065..c99c472 100644
--- a/src/doc/src/devices/qtee-raspberry-pi.qdoc
+++ b/src/doc/src/devices/qtee-raspberry-pi.qdoc
@@ -51,7 +51,7 @@
 
     \badcode
         cd <INSTALL_DIR>
-        sudo 5.5/Boot2Qt/raspberrypi2-eLinux/images/deploy.sh /dev/<device_name>
+        sudo dd bs=4k if=5.6/Boot2Qt/raspberrypi2/images/b2qt-embedded-qt5-image-raspberrypi2.img of=/dev/<device_name>
     \endcode
 
     After the image has been deployed, insert the SD card, power on the device and check that
diff --git a/src/doc/src/devices/qtee-sabre-sd-imx6.qdoc b/src/doc/src/devices/qtee-sabre-sd-imx6.qdoc
index 819da9f..a50817d 100644
--- a/src/doc/src/devices/qtee-sabre-sd-imx6.qdoc
+++ b/src/doc/src/devices/qtee-sabre-sd-imx6.qdoc
@@ -56,7 +56,7 @@
 
     \badcode
         cd <INSTALL_DIR>
-        sudo 5.5/Boot2Qt/imx6qsabresd-eLinux/images/deploy.sh /dev/<device_name>
+        sudo dd bs=4k if=5.6/Boot2Qt/imx6qsabresd/images/b2qt-embedded-qt5-image-imx6qsabresd.img of=/dev/<device_name>
     \endcode
 
     To deploy the image on \b {i.MX6Dual}, you need to enter an additional boot
@@ -64,7 +64,7 @@
 
     \badcode
         cd <INSTALL_DIR>
-        sudo 5.5/Boot2Qt/imx6qsabresd-eLinux/images/deploy.sh --uboot u-boot-imx6dlsabresd.imx /dev/<device_name>
+        sudo 5.6/Boot2Qt/imx6qsabresd-eLinux/images/deploy.sh --uboot u-boot-imx6dlsabresd.imx /dev/<device_name>
     \endcode
 
     After the image has been deployed, insert the SD card, power on the device and check that
diff --git a/src/doc/src/devices/qtee-toradex-apalis.qdoc b/src/doc/src/devices/qtee-toradex-apalis.qdoc
index 8d04b6e..220d5e5 100644
--- a/src/doc/src/devices/qtee-toradex-apalis.qdoc
+++ b/src/doc/src/devices/qtee-toradex-apalis.qdoc
@@ -51,7 +51,7 @@
 
     \badcode
         cd <INSTALL_DIR>
-        sudo 5.5/Boot2Qt/apalis-imx6-eLinux/images/deploy.sh /dev/<device_name>
+        sudo dd bs=4k if=5.6/Boot2Qt/apalis-imx6/images/b2qt-embedded-qt5-image-apalis-imx6.img of=/dev/<device_name>
     \endcode
 
     By default, the Toradex Apalis iMX6 boots from its internal eMMC. In order to boot from
diff --git a/src/doc/src/devices/qtee-toradex-colibri-imx6.qdoc b/src/doc/src/devices/qtee-toradex-colibri-imx6.qdoc
index 475a05e..5b28425 100644
--- a/src/doc/src/devices/qtee-toradex-colibri-imx6.qdoc
+++ b/src/doc/src/devices/qtee-toradex-colibri-imx6.qdoc
@@ -51,7 +51,7 @@
 
     \badcode
         cd <INSTALL_DIR>
-        sudo 5.5/Boot2Qt/colibri-imx6-eLinux/images/deploy.sh /dev/<device_name>
+        sudo dd bs=4k if=5.6/Boot2Qt/colibri-imx6/images/b2qt-embedded-qt5-image-colibri-imx6.img of=/dev/<device_name>
     \endcode
 
     By default, the Toradex Colibri iMX6 boots from its internal eMMC. In order to boot from
diff --git a/src/doc/src/devices/qtee-toradex-colibri-vf.qdoc b/src/doc/src/devices/qtee-toradex-colibri-vf.qdoc
index 7329fbf..d27030c 100644
--- a/src/doc/src/devices/qtee-toradex-colibri-vf.qdoc
+++ b/src/doc/src/devices/qtee-toradex-colibri-vf.qdoc
@@ -53,7 +53,7 @@
 
     \badcode
         cd <INSTALL_DIR>
-        sudo 5.5/Boot2Qt/colibri-vf-eLinux/images/deploy.sh /dev/<device_name>
+        sudo dd bs=4k if=5.6/Boot2Qt/colibri-vf/images/b2qt-embedded-qt5-image-colibri-vf.img of=/dev/<device_name>
     \endcode
 
     By default, the Toradex Colibri VF devices boot from their internal NAND memory. In order to boot from