diff options
Diffstat (limited to 'src/doc/src')
-rw-r--r-- | src/doc/src/b2qt.qdoc | 70 |
1 files changed, 70 insertions, 0 deletions
diff --git a/src/doc/src/b2qt.qdoc b/src/doc/src/b2qt.qdoc index 3dad876..3902529 100644 --- a/src/doc/src/b2qt.qdoc +++ b/src/doc/src/b2qt.qdoc @@ -46,6 +46,7 @@ \li \l{Preparing Nexus 7 (2012/2013)}{Nexus 7 (2012/2013) (embedded Android)} \li \l{Preparing BD-SL-i.MX6}{BD-SL-i.MX6 (embedded Android and Linux)} \li \l{Preparing SABRE SD i.MX6Quad}{SABRE SD i.MX6Quad (embedded Linux)} + \li \l{Preparing Toradex Apalis iMX6}{Toradex Apalis iMX6 (embedded Linux)} \li \l{Preparing BeagleBone Black}{BeagleBone Black (embedded Android and Linux)} \li \l{Preparing BeagleBoard-xM}{BeagleBoard-xM (embedded Linux)} \li \l{Preparing Raspberry Pi}{Raspberry Pi Model B (embedded Linux)} @@ -309,6 +310,7 @@ \li \l{Nexus 7 (2012/2013) (embedded Android)} \li \l{BD-SL-i.MX6 (embedded Android and Linux)} \li \l{SABRE SD i.MX6Quad (embedded Linux)} + \li \l{Toradex Apalis iMX6 (embedded Linux)} \li \l{BeagleBone Black (embedded Android and Linux)} \li \l{BeagleBoard-xM (embedded Linux)} \li \l{Raspberry Pi Model B (embedded Linux)} @@ -601,6 +603,69 @@ */ /*! + \target Toradex Apalis iMX6 (embedded Linux) + \page qtee-preparing-hardware-apalis-imx6.html + \title Preparing Toradex Apalis iMX6 + \previouspage qtee-installation-guide.html + + Take the following steps to prepare a + \l{http://www.toradex.com/products/apalis-arm-computer-modules/freescale-imx-6-computer-module} + {Toradex Apalis iMX6} for \B2Q. + + \note It is important that you repeat the steps in this section after you + update \SDK. + + The images containing the \B2Q stack for Toradex Apalis iMX6 are included + in \SDK, ready to be copied to an SD card. + + \section1 Preparing an SD Card + + An SD card of at least 512 MB capacity is sufficient. + + \include detect-sd-card-device-name.qdocinc instructions + + \section1 Installing the \B2Q Image + + To write the image to the SD card, ensure that no partitions on the + SD card are mounted: + + \include detect-sd-card-device-name.qdocinc unmount + + Then, + + \badcode + cd <INSTALL_DIR> + sudo Boot2Qt-3.x/apalis-imx6-eLinux/images/deploy.sh /dev/<device_name> + \endcode + + By default, the Toradex Apalis iMX6 boots from its internal eMMC. In order to boot from + the external SD card, the U-Boot environment needs to be updated. Connect a serial cable + to the device and enter into the U-Boot environment by pressing any key before the autoboot. + Enter following lines into U-Boot: + + \badcode + setenv bootcmd 'run sdboot ; echo sdboot failed ; run emmcboot ; echo ; echo emmcboot failed ; run nfsboot ; echo ; echo nfsboot failed ; usb start ;setenv stdout serial,vga ; setenv stdin serial,usbkbd' + setenv sdboot 'run setup; setenv bootargs ${defargs} ${sdargs} ${setupargs} ${vidargs};echo Booting from SD card in 8bit slot...; fatload mmc 2:1 10800000 uImage && bootm 10800000' + setenv sdargs 'ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 rootwait' + saveenv + \endcode + + New U-Boot command are now stored into the device, and you can start \B2Q. For more information + about the boot process on Toredex Apalis iMX6, see + \l{http://developer.toradex.com/software-resources/arm-family/linux/linux-booting}{Toradex Linux Booting} + + After the image has been deployed, insert the SD card, power on the device and check that + the \B2Q welcome screen and/or demo appear. + + \section1 Configuring a Device Kit in Qt Creator + + \include b2qt-post-install-setup.qdocinc configuring network device + + You are now ready to start developing for your device. For more information, + see \l{Building and Running an Example}. +*/ + +/*! \target Raspberry Pi Model B (embedded Linux) \page qtee-preparing-hardware-rasberrypi.html \title Preparing Raspberry Pi @@ -1116,6 +1181,9 @@ \li Freescale SABRE SD i.MX6Quad \li imx6qsabresd \row + \li Toradex Apalis iMX6 + \li apalis-imx6 + \row \li Emulator \li emulator \endtable @@ -1204,6 +1272,8 @@ {Freescale SABRE SD i.MX6Quad} \li \l{http://boundarydevices.com/products/sabre-lite-imx6-sbc/} {BD-SL-i.MX6} + \li \l{http://www.toradex.com/products/apalis-arm-computer-modules/freescale-imx-6-computer-module} + {Toradex Apalis iMX6} \li \l{http://www.raspberrypi.org/faqs} {Raspberry Pi Model B} \endlist |