diff options
Diffstat (limited to 'src/doc/src')
-rw-r--r-- | src/doc/src/devices/qtee-bd-sl-imx6.qdoc | 23 | ||||
-rw-r--r-- | src/doc/src/devices/qtee-kontron-smarc-samx6i.qdoc | 88 | ||||
-rw-r--r-- | src/doc/src/devices/qtee-supported-devices.qdoc | 16 | ||||
-rw-r--r-- | src/doc/src/qtee-changelog.qdoc | 32 | ||||
-rw-r--r-- | src/doc/src/qtee-custom-embedded-linux.qdoc | 6 | ||||
-rw-r--r-- | src/doc/src/qtee-index.qdoc | 2 | ||||
-rw-r--r-- | src/doc/src/qtee-install-guide.qdoc | 2 |
7 files changed, 155 insertions, 14 deletions
diff --git a/src/doc/src/devices/qtee-bd-sl-imx6.qdoc b/src/doc/src/devices/qtee-bd-sl-imx6.qdoc index e46882a..e6c90f8 100644 --- a/src/doc/src/devices/qtee-bd-sl-imx6.qdoc +++ b/src/doc/src/devices/qtee-bd-sl-imx6.qdoc @@ -100,6 +100,29 @@ \endcode \endlist + \b {Setup for 1280×800 displays} + + Boundary Devices offers 1280x800 LCD touch panels that require changes in U-Boot environment + variable to be correctly identified. + + Use one of the two following options to enable the scripts boot the device + with correct display panel setting: + + \list + \li Write a \c uEnv.txt file on to the boot partition of SD card with the following + content: + + \badcode + panel=LDB-WXGA + \endcode + + \li Access the device's console and run the following commands on the U-Boot prompt: + \badcode + U-Boot > setenv panel LDB-WXGA + U-Boot > saveenv + \endcode + \endlist + \section1 Setting up USB Access \include b2qt-post-install-setup.qdocinc setting up usb access diff --git a/src/doc/src/devices/qtee-kontron-smarc-samx6i.qdoc b/src/doc/src/devices/qtee-kontron-smarc-samx6i.qdoc new file mode 100644 index 0000000..a0f2549 --- /dev/null +++ b/src/doc/src/devices/qtee-kontron-smarc-samx6i.qdoc @@ -0,0 +1,88 @@ +/**************************************************************************** +** +** Copyright (C) 2014 Digia Plc +** All rights reserved. +** For any questions to Digia, please use the contact form at +** http://www.qt.io +** +** This file is part of Qt Enterprise Embedded. +** +** Licensees holding valid Qt Enterprise licenses may use this file in +** accordance with the Qt Enterprise License Agreement provided with the +** Software or, alternatively, in accordance with the terms contained in +** a written agreement between you and Digia. +** +** If you have questions regarding the use of this file, please use +** the contact form at http://www.qt.io +** +****************************************************************************/ +/*! + \keyword Kontron SMARC-sAMX6i + \page qtee-preparing-hardware-smarc-samx6i.html + \title Preparing Kontron SMARC-sAMX6i + \previouspage qtee-installation-guide.html + + Take the following steps to prepare a + \l{http://www.kontron.com/products/boards-and-standard-form-factors/smarc/smarc-samx6i.html} + {Kontron SMARC-sAMX6i} for \B2Q. + + \note It is important that you repeat the steps in this section after you + update \SDK. + + The images containing the \B2Q stack for Kontron SMARC-sAMX6i are included + in \SDK, ready to be copied to an SD card. + + \section1 Preparing an SD Card + + An SD card of at least 1 GB capacity is sufficient. + + \include detect-sd-card-device-name.qdocinc instructions + + \section1 Installing the \B2Q Image + + \include common.qdocinc wizard + + To write the image to the SD card, ensure that no partitions on the + SD card are mounted: + + \include detect-sd-card-device-name.qdocinc unmount + + Then, + + \badcode + cd <INSTALL_DIR> + sudo 5.5/Boot2Qt/apalis-imx6-eLinux/images/deploy.sh /dev/<device_name> + \endcode + + By default, the Kontron SMARC-sAMX6i boots from its internal eMMC. In order to boot from + the external SD card, the U-Boot environment needs to be updated. Connect a serial cable + to the device and enter into the U-Boot environment by pressing any key before the autoboot. + Enter following commands into U-Boot: + + \badcode + setenv mmcdev 1 + setenv mmcpart 2 + setenv bootcmd 'mmc dev ${mmcdev}; if mmc rescan; then if run loadfdt; then if run loaduimage; then run mmcboot; else run netboot; fi; else run netboot; fi; else run netboot; fi;' + setenv uimage /boot/uImage + setenv fdtfile /boot/imx6q-smx6-lcd.dtb + setenv mmcroot /dev/mmcblk0p2 rootwait rw + setenv mmcargs 'setenv bootargs video=mxcfb0:dev=hdmi,1280x720M@60,if=RGB24 fbmem=28M console=${console},${baudrate} root=${mmcroot}' + saveenv + \endcode + + New U-Boot commands are now stored into the device, and you can start \B2Q. + + After the image has been deployed, insert the SD card, power on the device and check that + the \B2Q welcome screen and/or demo appear. + + \section1 Setting up USB Access + + \include b2qt-post-install-setup.qdocinc setting up usb access + + \section1 Configuring a Device Kit in Qt Creator + + \include b2qt-post-install-setup.qdocinc configuring device kit + + You are now ready to start developing for your device. For more information, + see \l{Building and Running an Example}. +*/ diff --git a/src/doc/src/devices/qtee-supported-devices.qdoc b/src/doc/src/devices/qtee-supported-devices.qdoc index 04d6203..360c940 100644 --- a/src/doc/src/devices/qtee-supported-devices.qdoc +++ b/src/doc/src/devices/qtee-supported-devices.qdoc @@ -34,6 +34,7 @@ \li \l{Toradex Colibri iMX6} \li \l{Toradex Colibri VF50 and VF61} \li \l{ArchiTech Tibidabo} + \li \l{Kontron SMARC-sAMX6i} \li \l{BeagleBone Black} \li \l{Raspberry Pi 2 Model B} \endlist @@ -150,6 +151,10 @@ Freescale® i.MX6S or i.MX6DL ARM Cortex™-A9 @800MHz - 1GHz,\br 256MB (single core), 512MB (dual core) DDR3, 4GB eMMC,\br Vivante 2D/3D GPU + \row \li \l{http://www.kontron.com/products/boards-and-standard-form-factors/smarc/smarc-samx6i.html} + {Kontron SMARC-sAMX6i}\br + Freescale® i.MX 6 ARM Cortex™-A9 @800MHz - 1.2GHz,\br + 2GB DDR3, 2-64GB eMMC, Vivante GC2000 GPU \row \li \l{https://www.raspberrypi.org/products/raspberry-pi-2-model-b/} {Raspberry Pi 2 Model B}\br 900 Mhz ARM Cortex™-A7, Broadcom VideoCore IV\br @@ -284,6 +289,17 @@ \li \image ok \li \image ok \li + \row \li Kontron SMARC-sAMX6i + \li \image ok + \li \image ok + \li \image ok + \li \image ok + \li \image ok + \li \image ok + \li \image ok + \li \image ok + \li \image ok + \li \row \li Raspberry Pi 2 \li \image ok \li \image ok diff --git a/src/doc/src/qtee-changelog.qdoc b/src/doc/src/qtee-changelog.qdoc index b771193..98358c7 100644 --- a/src/doc/src/qtee-changelog.qdoc +++ b/src/doc/src/qtee-changelog.qdoc @@ -23,13 +23,29 @@ \previouspage qtee-customization.html \nextpage qtee-troubleshooting.html + \section1 Boot to Qt 5.5.1 + \list + \li Release date: Sep 24, 2015 + \endlist + + \b{New Features}: + \list + \li \B2Q stack was updated to use Qt 5.5.1. + \li New reference device: Kontron SMARC-sAMX6i + \endlist + + \b{Improvements}: + \list + \li Enabled \l {Qt Quick Compiler} to run on add-on components. + \li Improved The Planets demo to work better on small displays. + \endlist + \section1 Boot to Qt 5.5.0 \list \li Release date: Jul 01, 2015 + \li Supported until: Sep 24, 2017 \endlist - \section2 Changes - \b{Deprecated Platforms}: \list \li Support for the embedded Android platform was deprecated. @@ -63,10 +79,9 @@ \section1 Boot to Qt 4.2.0 \list \li Release date: Jun 02, 2015 + \li Supported until: Jul 01, 2017 \endlist - \section2 Changes - \b{New Features}: \list \li \B2Q stack was updated to use Qt 5.4.2 on embedded Android @@ -89,7 +104,6 @@ \li Supported until: Jun 02, 2017 \endlist - \section2 Changes \b{New Features}: \list \li \B2Q stack was updated to use Qt 5.4.1 on embedded Android @@ -119,7 +133,6 @@ \li Supported until: Feb 19, 2017 \endlist - \section2 Changes \b{New Features}: \list \li \B2Q stack was updated to use Qt 5.4.0 on embedded Android @@ -173,7 +186,6 @@ \li Supported until: Dec 10, 2016 \endlist - \section2 Changes \b {New Features}: \list \li \B2Q stack was updated to use Qt 5.3.2 on embedded Android @@ -215,7 +227,6 @@ \li Supported until: Oct 14, 2016 \endlist - \section2 Changes \b {Fixed Bugs}: \list \li \l {Building Your Own Embedded Linux Image}: @@ -229,7 +240,6 @@ \li Supported until: Aug 20, 2016 \endlist - \section2 Changes \b {New Features}: \list \li Boot to Qt stack was updated to use Qt 5.3.1 on embedded Android @@ -271,7 +281,6 @@ \li Supported until: July 03, 2016 \endlist - \section2 Changes \b {New Features}: \list \li \B2Q stack was updated to use Qt 5.3 on embedded Android and Linux @@ -308,7 +317,6 @@ \li Supported until: May 22, 2016 \endlist - \section2 Changes \b {New Features}: \list \li \l {Qt Data Visualization} version 1.0 was added to the \B2Q stack @@ -363,7 +371,6 @@ \li Supported until: Apr. 15, 2016 \endlist - \section2 Changes \b {New Features}: \list \li \B2Q stack was updated to use Qt 5.2.1 on embedded Android and Linux @@ -414,7 +421,6 @@ \li Supported until: Feb. 25, 2016 \endlist - \section2 Changes \list \li Emulator: Remote control widget version shown together with emulator version \li Emulator: Mouse events are sent instead of touch events diff --git a/src/doc/src/qtee-custom-embedded-linux.qdoc b/src/doc/src/qtee-custom-embedded-linux.qdoc index 0064e35..5d2a577 100644 --- a/src/doc/src/qtee-custom-embedded-linux.qdoc +++ b/src/doc/src/qtee-custom-embedded-linux.qdoc @@ -84,6 +84,9 @@ <INSTALL_DIR>/5.6/Boot2Qt/sources/b2qt-yocto-meta/b2qt-init-build-env help \endcode + \note Support for Kontron SMARC-sAMX6i requires additional Yocto Board Support Package that is + downloadable from \l{http://emdcustomersection.kontron.com/?page_id=2750}{Kontron Customer Section}. + \section1 Building the Image and Toolchain After the Yocto environment is set up, you need to configure the @@ -131,6 +134,9 @@ \li SILICA ArchiTech Tibidabo \li tibidabo \row + \li Kontron SMARC-sAMX6i + \li smarc-smax6i + \row \li Emulator \li emulator \endtable diff --git a/src/doc/src/qtee-index.qdoc b/src/doc/src/qtee-index.qdoc index 2f9f9e8..edec7bb 100644 --- a/src/doc/src/qtee-index.qdoc +++ b/src/doc/src/qtee-index.qdoc @@ -22,6 +22,7 @@ \nextpage qtee-overview.html \title Qt 5.6 for Device Creation + \welcome \e {Qt for Device Creation} is a commercial offering, providing a fully-integrated solution for creating embedded Linux-based products. It provides the complete toolchain required for faster software development, @@ -49,6 +50,7 @@ \li \l{Preparing Toradex Colibri iMX6}{Toradex Colibri iMX6} \li \l{Preparing Toradex Colibri VF50 and VF61}{Toradex Colibri VF50 and VF61} \li \l{Preparing ArchiTech Tibidabo}{ArchiTech Tibidabo} + \li \l{Preparing Kontron SMARC-sAMX6i}{Kontron SMARC-sAMX6i} \li \l{Preparing BeagleBone Black}{BeagleBone Black} \li \l{Preparing Raspberry Pi 2}{Raspberry Pi 2 Model B} \endlist diff --git a/src/doc/src/qtee-install-guide.qdoc b/src/doc/src/qtee-install-guide.qdoc index 4fb097d..2c0669d 100644 --- a/src/doc/src/qtee-install-guide.qdoc +++ b/src/doc/src/qtee-install-guide.qdoc @@ -82,7 +82,7 @@ \li Start the VirtualBox user interface. \li Select \b{File > Preferences} > \b{Network} to open VirtualBox network settings. - \li Create a new network named \e{vboxnet0} and edit its properties: + \li Create a new host-only network named \e{vboxnet0} and edit its properties: \list 1 \li Change the IPv4 address to \c{192.168.56.1} and the IPv4 network |