From 8f836989f4e91400123e9e499ff49175d6f8585d Mon Sep 17 00:00:00 2001 From: aavit Date: Wed, 26 Nov 2014 11:56:45 +0100 Subject: Doc: Add Tibidabo device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Change-Id: Iad4a7eb08ba3518e4f2110b2ba0048a5f46713d0 Reviewed-by: Kalle Viironen Reviewed-by: Topi Reiniö --- src/doc/src/devices/qtee-architech-tibidabo.qdoc | 68 ++++++++++++++++++++++++ 1 file changed, 68 insertions(+) create mode 100644 src/doc/src/devices/qtee-architech-tibidabo.qdoc (limited to 'src/doc/src/devices/qtee-architech-tibidabo.qdoc') diff --git a/src/doc/src/devices/qtee-architech-tibidabo.qdoc b/src/doc/src/devices/qtee-architech-tibidabo.qdoc new file mode 100644 index 0000000..a8b8214 --- /dev/null +++ b/src/doc/src/devices/qtee-architech-tibidabo.qdoc @@ -0,0 +1,68 @@ +/**************************************************************************** +** +** Copyright (C) 2014 Digia Plc +** All rights reserved. +** For any questions to Digia, please use the contact form at +** http://www.qt.io +** +** This file is part of Qt Enterprise Embedded. +** +** Licensees holding valid Qt Enterprise licenses may use this file in +** accordance with the Qt Enterprise License Agreement provided with the +** Software or, alternatively, in accordance with the terms contained in +** a written agreement between you and Digia. +** +** If you have questions regarding the use of this file, please use +** the contact form at http://www.qt.io +** +****************************************************************************/ +/*! + \target ArchiTech Tibidabo (embedded Linux) + \page qtee-preparing-hardware-tibidabo.html + \title Preparing ArchiTech Tibidabo + \previouspage qtee-installation-guide.html + + Take the following steps to prepare a SILICA + \l{http://www.silica.com/product/architech-tibidabo.html}{ArchiTech Tibidabo} for \B2Q. + + \note It is important that you repeat the steps in this section after you + update \SDK. + + The images containing the \B2Q stack for ArchiTech Tibidabo are included + in \SDK, ready to be copied to an SD card. + + \section1 Preparing an SD Card + + An SD card of at least 1 GB capacity is sufficient. + + \include detect-sd-card-device-name.qdocinc instructions + + \section1 Installing the \B2Q Image + + \include common.qdocinc wizard + + First, ensure that no partitions on the SD card are mounted: + + \include detect-sd-card-device-name.qdocinc unmount + + Then, use the following command: + + \badcode + cd + sudo ./Boot2Qt-4.x/tibidabo-eLinux/images/deploy.sh /dev/ + \endcode + + After the installation is complete, insert the SD card, power on the device and check that + the \B2Q welcome screen and/or demo appear. + + \section1 Setting up USB Access + + \include b2qt-post-install-setup.qdocinc setting up usb access + + \section1 Configuring a Device Kit in Qt Creator + + \include b2qt-post-install-setup.qdocinc configuring device kit + + You are now ready to start developing for your device. For more information, + see \l{Building and Running an Example}. +*/ -- cgit v1.2.3