From eebda51556daae681e9ddb878c36f79e497f5618 Mon Sep 17 00:00:00 2001 From: Topi Reinio Date: Tue, 30 Aug 2016 10:52:27 +0200 Subject: Doc: Remove generic Device Creation documentation ... and replace the documentation configuration with a one specific to Boot to Qt Utils. The removed documentation is available in a dedicated repository, tqtc-boot2qt/doc. The name of this module in 5.6 branch will be 'Qt for Device Creation: Add-On Modules'. The doc namespace and config files already reflect the name 'Qt Device Utilities', but that is not visible to the user in 5.6 (but will be in 5.7). Change-Id: Ib5a98d57b6ff5e7c29901f42697266f396abad82 Reviewed-by: Samuli Piippo --- src/doc/src/devices/qtee-sabre-sd-imx6.qdoc | 71 ----------------------------- 1 file changed, 71 deletions(-) delete mode 100644 src/doc/src/devices/qtee-sabre-sd-imx6.qdoc (limited to 'src/doc/src/devices/qtee-sabre-sd-imx6.qdoc') diff --git a/src/doc/src/devices/qtee-sabre-sd-imx6.qdoc b/src/doc/src/devices/qtee-sabre-sd-imx6.qdoc deleted file mode 100644 index 86f696f..0000000 --- a/src/doc/src/devices/qtee-sabre-sd-imx6.qdoc +++ /dev/null @@ -1,71 +0,0 @@ -/**************************************************************************** -** -** Copyright (C) 2014 Digia Plc -** All rights reserved. -** For any questions to Digia, please use the contact form at -** http://www.qt.io -** -** This file is part of Qt Enterprise Embedded. -** -** Licensees holding valid Qt Enterprise licenses may use this file in -** accordance with the Qt Enterprise License Agreement provided with the -** Software or, alternatively, in accordance with the terms contained in -** a written agreement between you and Digia. -** -** If you have questions regarding the use of this file, please use -** the contact form at http://www.qt.io -** -****************************************************************************/ -/*! - \keyword SABRE SD i.MX6Quad - \page qtee-preparing-hardware-imx6sabresd.html - \title Preparing SABRE SD i.MX6Quad - \previouspage qtee-installation-guide.html - - Take the following steps to prepare - \l {http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=RDIMX6SABREBRD} - {Freescale SABRE SD i.MX6Quad} for \B2Q: - - \note It is important that you repeat the steps in this section after you - update \SDK. - - The images containing the \B2Q stack for the above devices are included - in \SDK, ready to be copied to an SD card. - - \section1 Preparing an SD Card - - An SD card of at least 1 GB capacity is sufficient. - - \include detect-sd-card-device-name.qdocinc instructions - - \section1 Installing the \B2Q Image - - \include common.qdocinc wizard - - To write the image to the SD card, ensure that no partitions on the - SD card are mounted: - - \include detect-sd-card-device-name.qdocinc unmount - - To deploy the image, enter the following commands: - - \badcode - cd - sudo dd bs=4k if=5.6/Boot2Qt/imx6qsabresd/images/b2qt-embedded-qt5-image-imx6qsabresd.img of=/dev/ - \endcode - - After the image has been deployed, insert the SD card, power on the device and check that - the \B2Q welcome screen and/or demo appear. - - \section1 Setting up USB Access - - \include b2qt-post-install-setup.qdocinc setting up usb access - - \section1 Configuring a Device Kit in Qt Creator - - \include b2qt-post-install-setup.qdocinc configuring device kit - - You are now ready to start developing for your device. For more information, - see \l{Building and Running an Example}. -*/ - -- cgit v1.2.3