From eebda51556daae681e9ddb878c36f79e497f5618 Mon Sep 17 00:00:00 2001 From: Topi Reinio Date: Tue, 30 Aug 2016 10:52:27 +0200 Subject: Doc: Remove generic Device Creation documentation ... and replace the documentation configuration with a one specific to Boot to Qt Utils. The removed documentation is available in a dedicated repository, tqtc-boot2qt/doc. The name of this module in 5.6 branch will be 'Qt for Device Creation: Add-On Modules'. The doc namespace and config files already reflect the name 'Qt Device Utilities', but that is not visible to the user in 5.6 (but will be in 5.7). Change-Id: Ib5a98d57b6ff5e7c29901f42697266f396abad82 Reviewed-by: Samuli Piippo --- src/doc/src/devices/qtee-supported-devices.qdoc | 322 ------------------------ 1 file changed, 322 deletions(-) delete mode 100644 src/doc/src/devices/qtee-supported-devices.qdoc (limited to 'src/doc/src/devices/qtee-supported-devices.qdoc') diff --git a/src/doc/src/devices/qtee-supported-devices.qdoc b/src/doc/src/devices/qtee-supported-devices.qdoc deleted file mode 100644 index b78449e..0000000 --- a/src/doc/src/devices/qtee-supported-devices.qdoc +++ /dev/null @@ -1,322 +0,0 @@ -/**************************************************************************** -** -** Copyright (C) 2014 Digia Plc -** All rights reserved. -** For any questions to Digia, please use the contact form at -** http://www.qt.io -** -** This file is part of Qt Enterprise Embedded. -** -** Licensees holding valid Qt Enterprise licenses may use this file in -** accordance with the Qt Enterprise License Agreement provided with the -** Software or, alternatively, in accordance with the terms contained in -** a written agreement between you and Digia. -** -** If you have questions regarding the use of this file, please use -** the contact form at http://www.qt.io -** -****************************************************************************/ - -/*! - \page qtee-preparing-hardware.html - \title Preparing Hardware - \previouspage qtee-supported-platforms.html - \nextpage qtee-building-and-running.html - - Before you can deploy and test your Qt application on hardware, you must - flash the target device with an image that contains the - \B2Q stack. These steps vary from device to device: - - \list - \li \l{Boundary Devices i.MX6 Boards} - \li \l{SABRE SD i.MX6Quad} - \li \l{Toradex Apalis iMX6} - \li \l{Toradex Colibri iMX6} - \li \l{Toradex Colibri VF50 and VF61} - \li \l{ArchiTech Tibidabo} - \li \l{Kontron SMARC-sAMX6i} - \li \l{BeagleBone Black} - \li \l{Raspberry Pi 2 Model B} - \endlist - - If you use only the emulator, you can skip this step - and continue straight to \l {Building and Running an Example}. -*/ - -/*! - \page qtee-supported-platforms.html - \title Supported Platforms - \previouspage qtee-installation-guide.html - \nextpage qtee-preparing-hardware.html - - \section1 Supported Reference Devices - - The \B2Q stack can be made to run on a variety of hardware. For \SDK license - holders, tooling is provided to customize the contents of the stack as well - as to take it into desired production hardware. For more information on how - to customize the stack for embedded Linux, see - \l {Building Your Own Embedded Linux Image}. - - Approximate minimal hardware requirements for running \B2Q are: - \list - \li 256 MB of RAM - \li 500 MHz CPU, 1 GHz preferred for 60-FPS velvet-smooth UI - \li OpenGL ES 2.0 support * - \endlist - - * On GPU-less hardware, \l {Qt Quick 2D Renderer} can replace the - OpenGL ES 2.0 requirement (with some limitations on graphics capabilities). - - \section1 Support Lifecycle Policy - - The Qt Company will continue providing support for this release of \SDK - two years after the release date of a version that supercedes it. - - Release dates and support end-of-life dates for each version are listed - in the ChangeLog. - - \section2 Emulator Support - - Support for the emulator is limited to the \SDK release and pre-compiled - emulator images it shipped with. Using the emulator application to run - images from previous releases is not supported. - - \section1 Supported Device Groups - - The reference devices are divided into three groups, based on level - of support The Qt Company provides for the device: - - \section2 Group 1 - - Qt is fully supported unless otherwise stated due to limitations on the - platform level. Support can help with any issues relating to the Qt - libraries and tools, but not the third party elements. Any problems found - need to be reproducible with Qt libraries for further investigation by - the support team. - - Pre-compiled embedded Linux images for group 1 devices are available via - the Qt online installer. - - \table - \header \li Devices with GPU - \row \li \l{http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=RDIMX6SABREBRD} - {Freescale® SABRE SD i.MX6Quad} (Freescale® i.MX6)\br - 4x ARM Cortex A9, Vivante GC2000 GPU, 1GB RAM - \row \li \l{http://beagleboard.org/products/beaglebone%20black} - {BeagleBone Black}\br - TIAM335x 1GHz ARM® Cortex-A8, 512 MB RAM - \row \li \b{\B2Q Emulator}\br - Included in the development environment - \header \li Devices Without GPU - \row \li \l{https://www.toradex.com/products/colibri-arm-computer-modules/freescale-vybrid-VF6xx-computer-module} - {Toradex Colibri VF61}\br - Dual-core (ARM Cortex-A5 + ARM Cortex-M4)\br - solution with 1 MB on-chip SRAM - \row \li \l{https://www.toradex.com/products/colibri-arm-computer-modules/freescale-vybrid-VF5xx-computer-module} - {Toradex Colibri VF50}\br - Single-core (ARM Cortex-A5) solution with 1.5 MB on-chip SRAM - \endtable - - \section2 Group 2 - - Qt is fully supported unless otherwise stated due to limitations on the - platform level. Support can help with any issues relating to the Qt - libraries and tools, but not the third party elements. Any problems found - need to be reproducible with Qt libraries. - - If an issue is reproducible on either the desktop or a group 1 platform, - then it will be investigated further by the support team. Otherwise, a - bug report will be created, to be handled by the party responsible for the - Qt port to the platform. - - Pre-compiled images for group 2 devices are available via the Qt - online installer. - - \table - \header \li Devices with GPU - \row \li \l{http://boundarydevices.com/product-selector-guide/} - {Boundary Devices i.MX6 Boards}\br - Freescale® i.MX 6 based devices with\br - Vivante GC880 or GC2000 GPU - \row \li \l{http://www.silica.com/product/architech-tibidabo.html} - {SILICA ArchiTech Tibidabo}\br - Freescale® i.MX 6Q ARM Cortex™-A9 @800 MHz,\br - 2GB DDR3, 128MB NOR, Vivante GC2000 GPU - \row \li \l{http://www.toradex.com/products/apalis-arm-computer-modules/freescale-imx-6-computer-module} - {Toradex Apalis iMX6}\br - Freescale® i.MX 6Q ARM Cortex™-A9 @1 GHz,\br - 1GB DDR3, 4GB eMMC, Vivante GC2000 GPU - \row \li \l{http://developer.toradex.com/product-selector/colibri-imx6} - {Toradex Colibri iMX6}\br - Freescale® i.MX6S or i.MX6DL ARM Cortex™-A9 @800MHz - 1GHz,\br - 256MB (single core), 512MB (dual core) DDR3, 4GB eMMC,\br - Vivante 2D/3D GPU - \row \li \l{http://www.kontron.com/products/boards-and-standard-form-factors/smarc/smarc-samx6i.html} - {Kontron SMARC-sAMX6i}\br - Freescale® i.MX 6 ARM Cortex™-A9 @800MHz - 1.2GHz,\br - 2GB DDR3, 2-64GB eMMC, Vivante GC2000 GPU - \row \li \l{https://www.raspberrypi.org/products/raspberry-pi-2-model-b/} - {Raspberry Pi 2 Model B}\br - 900 Mhz ARM Cortex™-A7, Broadcom VideoCore IV\br - @250MHz GPU, 1GB LPDDR2 SDRAM - \endtable - - \section2 Group 3 - - No support provided. If a Qt related problem is found and reproducible with - the Qt libraries on either desktop or a group 1 platform then it will be - investigated further by the support team. - - To use these devices, you need to build images by yourself or contact - The Qt Company for consultancy services. - - \table - \header \li Device - \row \li \l{http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=RDIMX6SABREBRD} - {Freescale® SABRE SD i.MX6Dual} (Freescale® i.MX6)\br - 2x ARM Cortex A9, Vivante GC2000 GPU, 1GB RAM - \row \li \l{http://beagleboard.org/hardware-xM} - {BeagleBoard-xM}\br - 1GHz ARM Cortex A8, PowerVR SGX530 GPU,\br - 512MB RAM - \row \li \l{http://processors.wiki.ti.com/index.php/AM335x_Starter_Kit} - {Sitara AM335x Starter Kit}\br - 720 MHZ ARM Cortex™-A8 Starter Kit\br - with 4.3-inch LCD touchscreen - \row \li \l{http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=IMX53QSB} - {Freescale® iMX53 Quick Start Board}\br - 1GHz ARM Cortex™-A8 - \row \li \l{https://www.raspberrypi.org/products/model-b/} - {Raspberry Pi Model B}\br - 700 Mhz ARM11, Broadcom VideoCore IV\br - @250MHz GPU, 512 MB (shared with GPU) RAM - \endtable - - \section2 Supported Features on Reference Devices - - The following features are supported without any modification on the - pre-built images available for the reference devices: - - \table - \header \li Device - \li Touchscreen - \li ADB via Network - \li ADB via USB - \li HDMI - \li HW Accelerated \br Video Playback - \li Virtual Keyboard - \li B2Qt WiFi Module - \li B2Qt Utils Module - \li OpenGL ES 2.0 - \li Qt Quick \br 2D Renderer - - \header \li Group 1 \li \li \li \li \li \li \li \li \li \li - \row \li Freescale SABRE SD i.MX6 - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li - \row \li BeagleBone Black - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li - \row \li Toradex Colibri VF61 - \li \image ok - \li \image ok - \li \image ok - \li - \li - \li \image ok - \li \image ok - \li \image ok - \li - \li \image ok - \row \li Toradex Colibri VF50 - \li \image ok - \li \image ok - \li \image ok - \li - \li - \li \image ok - \li \image ok - \li \image ok - \li - \li \image ok - \header \li Group 2 \li \li \li \li \li \li \li \li \li \li - \row \li Boundary Devices i.MX6 Boards - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li - \row \li SILICA ArchiTech Tibidabo - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li - \row \li Toradex Apalis/Colibri i.MX6 - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li - \row \li Kontron SMARC-sAMX6i - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li - \row \li Raspberry Pi 2 - \li \image ok - \li \image ok - \li - \li \image ok - \li - \li \image ok - \li \image ok - \li \image ok - \li \image ok - \li - \endtable - - \section1 Supported Development Environment - - The development environment supported by \SDK is Ubuntu Linux 64-bit (12.04 LTS or later). - - \sa {Requirements for Development Host} - -*/ -- cgit v1.2.3