From 5bbd7f92e895d63439165fd0d3dfd5ee80bd6d7b Mon Sep 17 00:00:00 2001 From: Topi Reinio Date: Mon, 30 Jun 2014 11:37:43 +0200 Subject: Doc: split up the docs into multiple files Split up the monolithic b2qt.qdoc into separate documentation files, making future edits and maintenance easier. Device-specific instructions are created in devices/ subdirectory, and shared documentation (referenced in multiple places) are moved to shared/. Change-Id: I9425297781a1dda9c08a149b0870a0389c575560 Reviewed-by: Samuli Piippo Reviewed-by: Kalle Viironen --- src/doc/src/devices/qtee-supported-devices.qdoc | 106 ++++++++++++++++++++++++ 1 file changed, 106 insertions(+) create mode 100644 src/doc/src/devices/qtee-supported-devices.qdoc (limited to 'src/doc/src/devices/qtee-supported-devices.qdoc') diff --git a/src/doc/src/devices/qtee-supported-devices.qdoc b/src/doc/src/devices/qtee-supported-devices.qdoc new file mode 100644 index 0000000..ad33aa9 --- /dev/null +++ b/src/doc/src/devices/qtee-supported-devices.qdoc @@ -0,0 +1,106 @@ +/**************************************************************************** +** +** Copyright (C) 2014 Digia Plc +** All rights reserved. +** For any questions to Digia, please use the contact form at +** http://qt.digia.com/ +** +** This file is part of Qt Enterprise Embedded. +** +** Licensees holding valid Qt Enterprise licenses may use this file in +** accordance with the Qt Enterprise License Agreement provided with the +** Software or, alternatively, in accordance with the terms contained in +** a written agreement between you and Digia. +** +** If you have questions regarding the use of this file, please use +** the contact form at http://qt.digia.com/ +** +****************************************************************************/ + +/*! + \page qtee-preparing-hardware.html + \title Preparing Hardware + \previouspage qtee-supported-platforms.html + \nextpage qtee-building-and-running.html + + Before you can deploy and test your Qt application on hardware, you must + flash the target device with an image that contains the + \B2Q stack. These steps vary from device to device: + + \list + \li \l{Nexus 7 (2012/2013) (embedded Android)} + \li \l{BD-SL-i.MX6 (embedded Android and Linux)} + \li \l{SABRE SD i.MX6Quad (embedded Linux)} + \li \l{Toradex Apalis iMX6 (embedded Linux)} + \li \l{BeagleBone Black (embedded Android and Linux)} + \li \l{BeagleBoard-xM (embedded Linux)} + \li \l{Raspberry Pi Model B (embedded Linux)} + \endlist + + If you use only the emulator, you can skip this step + and continue straight to \l {Building and Running an Example}. +*/ + +/*! + \page qtee-supported-platforms.html + \title Supported Platforms + \previouspage qtee-installation-guide.html + \nextpage qtee-preparing-hardware.html + + \section1 Supported Reference Devices + + The \B2Q stack can be made to run on a variety of hardware. For \SDK license + holders, tooling is provided to customize the contents of the stack as well + as to take it into desired production hardware. For more information on how + to customize the stack for embedded Linux, see + \l {Building Your Own Embedded Linux Image}. + + Approximate minimal hardware requirements for running \B2Q are: + \list + \li 256 MB of RAM + \li 500 MHz CPU, 1 GHz preferred for 60-FPS velvet-smooth UI + \li OpenGL ES 2.0 support + \endlist + + \B2QA requires hardware that has support for the Android operating + system, version 4.2 or later. + + \B2Q software stack is provided pre-built, tested and supported for the + following hardware: + \list + \li \l{http://www.google.com/nexus/7/specs/} + {Google/Asus Nexus 7 (2012 and 2013 models)} + \li \l{http://beagleboard.org/products/beaglebone%20black} + {BeagleBone Black} + \li \l{http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=RDIMX6SABREBRD} + {Freescale SABRE SD i.MX6Quad} + \li \l{http://boundarydevices.com/products/sabre-lite-imx6-sbc/} + {BD-SL-i.MX6} + \li \l{http://www.toradex.com/products/apalis-arm-computer-modules/freescale-imx-6-computer-module} + {Toradex Apalis iMX6} + \li \l{http://www.raspberrypi.org/faqs} + {Raspberry Pi Model B} + \endlist + + \section2 Legacy Reference Devices + + The following devices are no longer tested or supported by the latest + release of \SDK. + + \list + \li \l{http://beagleboard.org/hardware-xM} + {BeagleBoard-xM} + \list + \li Starting from \SDK 3.0 release, BeagleBoard-xM is no longer + tested and supported. It is, however, still tested and supported + in the earlier 2.x releases. + \endlist + \endlist + + \section1 Supported Development Environment + + The development environment supported by \SDK is Ubuntu Linux 64-bit (12.04 LTS or later). + + \sa {Requirements for Development Host} + +*/ -- cgit v1.2.3