From 1812b8e95b8b27b0879c97e66fcda739b502f7aa Mon Sep 17 00:00:00 2001 From: Topi Reinio Date: Thu, 1 Sep 2016 10:43:52 +0200 Subject: Doc: Remove rest of the generic Qt for Device Creation doc files MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit These are moved to tqtc-boot2qt/doc repository. Change-Id: I8772597b684f292cfffe583e4eaa01679e7ec80b Reviewed-by: Topi Reiniö --- src/doc/src/devices/qtee-drive-cx.qdoc | 65 ---------------------------- src/doc/src/devices/qtee-intel-nuc.qdoc | 75 --------------------------------- 2 files changed, 140 deletions(-) delete mode 100644 src/doc/src/devices/qtee-drive-cx.qdoc delete mode 100644 src/doc/src/devices/qtee-intel-nuc.qdoc (limited to 'src/doc/src/devices') diff --git a/src/doc/src/devices/qtee-drive-cx.qdoc b/src/doc/src/devices/qtee-drive-cx.qdoc deleted file mode 100644 index 439d2a4..0000000 --- a/src/doc/src/devices/qtee-drive-cx.qdoc +++ /dev/null @@ -1,65 +0,0 @@ -/**************************************************************************** -** -** Copyright (C) 2016 The Qt Company Ltd. -** All rights reserved. -** For any questions to The Qt Company, please use the contact form at -** http://www.qt.io/contact-us -** -** This file is part of Qt for Device Creation. -** -** Licensees holding valid commercial Qt licenses may use this file in -** accordance with the commercial license agreement provided with the -** Software or, alternatively, in accordance with the terms contained in -** a written agreement between you and The Qt Company. For licensing terms -** and conditions see http://www.qt.io/terms-conditions. For further -** information use the contact form at http://www.qt.io/contact-us. -** -****************************************************************************/ -/*! - \page qtee-preparing-hardware-drivecx.html - \title NVIDIA DRIVE CX - \previouspage qtee-installation-guide.html - - Take the following steps when preparing \l {http://www.nvidia.com/object/drive-cx.html} - {NVIDIA DRIVE CX} for \B2Q: - - \note It is important that you repeat the steps in this section after you - update \QAS. - - The image containing the \B2Q stack for the device, as well as the - flashing tool are included in \QAS. - - \section1 Installing the \B2Q Image - - Connect the DRIVE CX board to the development host via USB, and set it in - \e {recovery mode} by changing the position of J9 jumper on the board. - - Then, run the flashing tool: - - \badcode - cd - sudo 5.7/Automotive/tegra-t18x/flash-nvidia/flash_device.sh - \endcode - - After the installation is complete, replace the J9 jumper to its original - position, and restart the device. After reboot, check that the automotive - UI appears. - - \section1 Setting up USB Access - - \include b2qt-post-install-setup.qdocinc setting up usb access - - \section1 Configuring a Device Kit in Qt Creator - - After you have prepared the hardware, you must perform one final step - to set up the development tools in Qt Creator for your device. Run the - following command: - - \badcode - cd - 5.7/Automotive/tegra-t18x/toolchain/configure-qtcreator.sh - \endcode - - You are now ready to start developing for your device. For more information, - see \l{Building and Running an Example}. -*/ diff --git a/src/doc/src/devices/qtee-intel-nuc.qdoc b/src/doc/src/devices/qtee-intel-nuc.qdoc deleted file mode 100644 index 7213e3b..0000000 --- a/src/doc/src/devices/qtee-intel-nuc.qdoc +++ /dev/null @@ -1,75 +0,0 @@ -/**************************************************************************** -** -** Copyright (C) 2016 The Qt Company Ltd. -** All rights reserved. -** For any questions to The Qt Company, please use the contact form at -** http://www.qt.io/contact-us -** -** This file is part of Qt for Device Creation. -** -** Licensees holding valid commercial Qt licenses may use this file in -** accordance with the commercial license agreement provided with the -** Software or, alternatively, in accordance with the terms contained in -** a written agreement between you and The Qt Company. For licensing terms -** and conditions see http://www.qt.io/terms-conditions. For further -** information use the contact form at http://www.qt.io/contact-us. -** -****************************************************************************/ -/*! - \page qtee-preparing-hardware-nuc.html - \title Intel NUC - \previouspage qtee-installation-guide.html - - Take the following steps when preparing an - \l {http://www.intel.com/content/www/us/en/nuc/overview.html}{Intel NUC} - for \B2Q: - - \note It is important that you repeat the steps in this section after you - update \SDK. - - The images containing the \B2Q stack for the device are included - in \SDK. In these instructions, we prepare a USB device (a flash drive - or an external USB hard drive) to boot from. - - \section1 Preparing a USB Boot Device - - For \B2Q, a USB drive of at least 2 GB capacity is needed. - - \include detect-sd-card-device-name.qdocinc instructions-usbdevice - - \section1 Installing the \B2Q Image - - \include common.qdocinc wizard - - Install the \B2Q image onto the USB device. First, ensure that no - partitions are mounted: - - \include detect-sd-card-device-name.qdocinc unmount - - Then, use the following command to install the image: - - \badcode - cd - sudo dd bs=4k if=5.7/Automotive/intel-corei7-64/images/b2qt-embedded-qt5-image-intel-corei7-64.img of=/dev/ - \endcode - - After the installation is complete, connect the USB drive to the device, - power it on, and enter the BIOS setup (\b F2). Follow the instructions on - \l {http://www.intel.com/content/www/us/en/support/boards-and-kits/000005471.html} - {Operating System Installation for Intel® NUC} for how to select the - USB drive as a boot device. - - Press \b F10 to save your changes and exit BIOS setup. After reboot, check that the - \B2Q welcome screen and/or demo appear. - - \section1 Setting up USB Access - - \include b2qt-post-install-setup.qdocinc setting up usb access - - \section1 Configuring a Device Kit in Qt Creator - - \include b2qt-post-install-setup.qdocinc configuring device kit linux - - You are now ready to start developing for your device. For more information, - see \l{Building and Running an Example}. -*/ -- cgit v1.2.3