From 360d20515d56b503565f85258fadcfb3c35dfc90 Mon Sep 17 00:00:00 2001 From: Topi Reinio Date: Fri, 21 Nov 2014 09:48:49 +0100 Subject: Doc: Discuss Flashing Wizard in the device setup instructions Mention the wizard as an easy alternative for setting up a device with B2Qt image. Change-Id: Ie58ee110f190c87164f36b5985dcc3613b9b6fb9 Reviewed-by: Rainer Keller --- src/doc/src/devices/qtee-bd-sl-imx6.qdoc | 4 +++- src/doc/src/devices/qtee-beaglebone-black.qdoc | 7 ++++--- src/doc/src/devices/qtee-nexus-7.qdoc | 2 ++ src/doc/src/devices/qtee-raspberry-pi.qdoc | 2 ++ src/doc/src/devices/qtee-sabre-sd-imx6quad.qdoc | 2 ++ src/doc/src/devices/qtee-toradex-apalis.qdoc | 6 ++++-- 6 files changed, 17 insertions(+), 6 deletions(-) (limited to 'src/doc/src/devices') diff --git a/src/doc/src/devices/qtee-bd-sl-imx6.qdoc b/src/doc/src/devices/qtee-bd-sl-imx6.qdoc index af040b3..e94835b 100644 --- a/src/doc/src/devices/qtee-bd-sl-imx6.qdoc +++ b/src/doc/src/devices/qtee-bd-sl-imx6.qdoc @@ -50,7 +50,7 @@ \include detect-sd-card-device-name.qdocinc instructions - \section1 Installing the Android image + \section1 Installing the Android Image \e{If installing} \B2QL, \e{you can skip this step and proceed to} \l{#Installing the Boot to Qt Image}{Installing the Boot to Qt Image}. @@ -78,6 +78,8 @@ \section1 Installing the \B2Q Image + \include common.qdocinc wizard + Make sure you have the required tools installed in your development machine: \badcode diff --git a/src/doc/src/devices/qtee-beaglebone-black.qdoc b/src/doc/src/devices/qtee-beaglebone-black.qdoc index 4a4c597..d05d54f 100644 --- a/src/doc/src/devices/qtee-beaglebone-black.qdoc +++ b/src/doc/src/devices/qtee-beaglebone-black.qdoc @@ -38,7 +38,7 @@ \include detect-sd-card-device-name.qdocinc instructions - \section1 Installing the Android image + \section1 Installing the Android Image \e{If installing} \B2QL, \e{you can skip this step and proceed to} \l{#Installing the Boot to Qt Image}{Installing the Boot to Qt Image}. @@ -64,8 +64,9 @@ \section1 Installing the \B2Q Image - Then, upgrade the SD card with \B2Q. First, ensure that no partitions on the - SD card are mounted: + \include common.qdocinc wizard + + First, ensure that no partitions on the SD card are mounted: \include detect-sd-card-device-name.qdocinc unmount diff --git a/src/doc/src/devices/qtee-nexus-7.qdoc b/src/doc/src/devices/qtee-nexus-7.qdoc index c2e7c6a..54ba445 100644 --- a/src/doc/src/devices/qtee-nexus-7.qdoc +++ b/src/doc/src/devices/qtee-nexus-7.qdoc @@ -67,6 +67,8 @@ \section1 Deploying the \B2Q Stack + \include common.qdocinc wizard + Depending on the edition of your Nexus 7 device, use one of the commands below to install the \B2Q stack. Replace \c{X.Y} with the device's Android version number, for example \c{4.2} or \c{4.4}. diff --git a/src/doc/src/devices/qtee-raspberry-pi.qdoc b/src/doc/src/devices/qtee-raspberry-pi.qdoc index f530333..60fb6af 100644 --- a/src/doc/src/devices/qtee-raspberry-pi.qdoc +++ b/src/doc/src/devices/qtee-raspberry-pi.qdoc @@ -45,6 +45,8 @@ \section1 Installing the \B2Q Image + \include common.qdocinc wizard + To write the image to the SD card, ensure that no partitions on the SD card are mounted: diff --git a/src/doc/src/devices/qtee-sabre-sd-imx6quad.qdoc b/src/doc/src/devices/qtee-sabre-sd-imx6quad.qdoc index fda1f9e..f462159 100644 --- a/src/doc/src/devices/qtee-sabre-sd-imx6quad.qdoc +++ b/src/doc/src/devices/qtee-sabre-sd-imx6quad.qdoc @@ -40,6 +40,8 @@ \section1 Installing the \B2Q Image + \include common.qdocinc wizard + To write the image to the SD card, ensure that no partitions on the SD card are mounted: diff --git a/src/doc/src/devices/qtee-toradex-apalis.qdoc b/src/doc/src/devices/qtee-toradex-apalis.qdoc index 0f38fc9..451c961 100644 --- a/src/doc/src/devices/qtee-toradex-apalis.qdoc +++ b/src/doc/src/devices/qtee-toradex-apalis.qdoc @@ -40,6 +40,8 @@ \section1 Installing the \B2Q Image + \include common.qdocinc wizard + To write the image to the SD card, ensure that no partitions on the SD card are mounted: @@ -75,9 +77,9 @@ \endcode - New U-Boot command are now stored into the device, and you can start \B2Q. For more information + New U-Boot commands are now stored into the device, and you can start \B2Q. For more information about the boot process on Toredex Apalis iMX6, see - \l{http://developer.toradex.com/software-resources/arm-family/linux/linux-booting}{Toradex Linux Booting} + \l{http://developer.toradex.com/software-resources/arm-family/linux/linux-booting}{Toradex Linux Booting}. After the image has been deployed, insert the SD card, power on the device and check that the \B2Q welcome screen and/or demo appear. -- cgit v1.2.3