From f02112c5feaa816b98d66c198e0635f3039c5c6c Mon Sep 17 00:00:00 2001 From: Topi Reinio Date: Thu, 29 Jan 2015 11:51:15 +0100 Subject: Doc: Move Toradex Colibri VF61 to Supported Device Group 1 Task-number: QTEE-893 Change-Id: I4ffdfdb3b9c72f3e36bd0670faa28b0dac13e18a Reviewed-by: Kalle Viironen --- src/doc/src/devices/qtee-supported-devices.qdoc | 35 ++++++++++++------------- 1 file changed, 17 insertions(+), 18 deletions(-) (limited to 'src/doc/src/devices') diff --git a/src/doc/src/devices/qtee-supported-devices.qdoc b/src/doc/src/devices/qtee-supported-devices.qdoc index 45eb804..a41a8bd 100644 --- a/src/doc/src/devices/qtee-supported-devices.qdoc +++ b/src/doc/src/devices/qtee-supported-devices.qdoc @@ -108,6 +108,12 @@ \li \image ok \li \image ok \header \li Devices Without GPU \li \li + \row \li \l{https://www.toradex.com/products/colibri-arm-computer-modules/freescale-vybrid-VF6xx-computer-module} + {Toradex Colibri VF61}\br + Dual-core (ARM Cortex-A5 + ARM Cortex-M4)\br + solution with 1 MB on-chip SRAM + \li \image ok + \li \row \li \l{https://www.toradex.com/products/colibri-arm-computer-modules/freescale-vybrid-VF5xx-computer-module} {Toradex Colibri VF50}\br Single-core (ARM Cortex-A5) solution with 1.5 MB on-chip SRAM @@ -162,13 +168,6 @@ @250MHz GPU, 512 MB (shared with GPU) RAM \li \image ok \li - \header \li Devices Without GPU \li \li - \row \li \l{https://www.toradex.com/products/colibri-arm-computer-modules/freescale-vybrid-VF6xx-computer-module} - {Toradex Colibri VF61}\br - Dual-core (ARM Cortex-A5 + ARM Cortex-M4)\br - solution with 1 MB on-chip SRAM - \li \image ok - \li \endtable \section2 Group 3 @@ -269,6 +268,17 @@ \li \image ok \li \image ok \li + \row \li Toradex Colibri VF61 + \li \image ok + \li \image ok + \li \image ok + \li + \li + \li \image ok + \li \image ok + \li \image ok + \li + \li \image ok \row \li Toradex Colibri VF50 \li \image ok \li \image ok @@ -336,17 +346,6 @@ \li \image ok \li \image ok \li - \row \li Toradex Colibri VF61 - \li \image ok - \li \image ok - \li \image ok - \li - \li - \li \image ok - \li \image ok - \li \image ok - \li - \li \image ok \endtable \section1 Supported Development Environment -- cgit v1.2.3 From 0aa0e22afad9dcc1773778a88e3411abaf2a26cf Mon Sep 17 00:00:00 2001 From: Topi Reinio Date: Wed, 18 Feb 2015 11:52:21 +0100 Subject: Doc: Update minimal hardware requirements Mention Qt Quick 2D Renderer as OpenGL ES 2.0 is no longer a hard requirement. Task-number: QTEE-917 Change-Id: Ia6b2ecfc5b27f44001a76078c6e2a1aa6f91739e Reviewed-by: Gatis Paeglis --- src/doc/src/devices/qtee-supported-devices.qdoc | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'src/doc/src/devices') diff --git a/src/doc/src/devices/qtee-supported-devices.qdoc b/src/doc/src/devices/qtee-supported-devices.qdoc index a41a8bd..07501b7 100644 --- a/src/doc/src/devices/qtee-supported-devices.qdoc +++ b/src/doc/src/devices/qtee-supported-devices.qdoc @@ -61,9 +61,12 @@ \list \li 256 MB of RAM \li 500 MHz CPU, 1 GHz preferred for 60-FPS velvet-smooth UI - \li OpenGL ES 2.0 support + \li OpenGL ES 2.0 support * \endlist + * On GPU-less hardware, \l {Qt Quick 2D Renderer} can replace the + OpenGL ES 2.0 requirement (with some limitations on graphics capabilities). + \B2QA requires hardware that has support for the Android operating system, version 4.2 or later. For rapid prototyping or feasibility testing, it is possible to install it on most programmable Android devices using @@ -229,7 +232,7 @@ \li HDMI \li HW Accelerated \br Video Playback \li Virtual Keyboard - \li Qt WiFi Module + \li B2Qt WiFi Module \li B2Qt Utils Module \li OpenGL ES 2.0 \li Qt Quick \br 2D Renderer -- cgit v1.2.3 From 287a9894ce65b6150fc54d6d151322c8b66e2cba Mon Sep 17 00:00:00 2001 From: Samuli Piippo Date: Tue, 26 May 2015 12:37:38 +0300 Subject: doc: Update colibri vf instructions New set of uboot commands to boot with latest kernel. Colibris have raw SLC NAND memory instead of eMMC. Change-Id: Id621fdb9692baffff14d78a18d9effe34928877e Reviewed-by: Eirik Aavitsland --- src/doc/src/devices/qtee-toradex-colibri-vf.qdoc | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'src/doc/src/devices') diff --git a/src/doc/src/devices/qtee-toradex-colibri-vf.qdoc b/src/doc/src/devices/qtee-toradex-colibri-vf.qdoc index 5c01753..c41728e 100644 --- a/src/doc/src/devices/qtee-toradex-colibri-vf.qdoc +++ b/src/doc/src/devices/qtee-toradex-colibri-vf.qdoc @@ -56,14 +56,14 @@ sudo Boot2Qt-4.x/colibri-vf-eLinux/images/deploy.sh /dev/ \endcode - By default, the Toradex Colibri-VF devices boot from their internal eMMC. In order to boot from + By default, the Toradex Colibri VF devices boot from their internal NAND memory. In order to boot from an external SD card, the U-Boot needs to be modified. Connect a serial cable to the device and enter into the U-Boot environment by pressing any key before the autoboot. Enter following commands into U-Boot: \badcode set bootcmd 'run sdboot; run ubiboot; run nfsboot;' - set sdboot 'run setup; setenv bootargs ${defargs} ${mmcargs} ${mtdparts} ${setupargs} ${vidargs}; echo Booting from MMC/SD card...; mmc part 0; fatload mmc 0:1 ${loadaddr} zImage && bootz' + set sddtbload 'setenv dtbparam; load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && setenv dtbparam ${fdt_addr_r}' save \endcode -- cgit v1.2.3 From cc30c5ebdef4d845bd18e39c07a5643af0f6c6a2 Mon Sep 17 00:00:00 2001 From: Samuli Piippo Date: Thu, 28 May 2015 13:41:40 +0300 Subject: doc: simpler uboot command for colibri vf MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Change-Id: I2124a91d6fd5f86dce7c5d3f341e505a8016dee0 Reviewed-by: Topi Reiniö Reviewed-by: Eirik Aavitsland --- src/doc/src/devices/qtee-toradex-colibri-vf.qdoc | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'src/doc/src/devices') diff --git a/src/doc/src/devices/qtee-toradex-colibri-vf.qdoc b/src/doc/src/devices/qtee-toradex-colibri-vf.qdoc index c41728e..5753256 100644 --- a/src/doc/src/devices/qtee-toradex-colibri-vf.qdoc +++ b/src/doc/src/devices/qtee-toradex-colibri-vf.qdoc @@ -62,9 +62,8 @@ Enter following commands into U-Boot: \badcode - set bootcmd 'run sdboot; run ubiboot; run nfsboot;' - set sddtbload 'setenv dtbparam; load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && setenv dtbparam ${fdt_addr_r}' - save + run setupdate + run update_uboot \endcode Reset or power cycle the device to continue. -- cgit v1.2.3