/**************************************************************************** ** ** Copyright (C) 2014 Digia Plc ** All rights reserved. ** For any questions to Digia, please use the contact form at ** http://qt.digia.com/ ** ** This file is part of Qt Enterprise Embedded. ** ** Licensees holding valid Qt Enterprise licenses may use this file in ** accordance with the Qt Enterprise License Agreement provided with the ** Software or, alternatively, in accordance with the terms contained in ** a written agreement between you and Digia. ** ** If you have questions regarding the use of this file, please use ** the contact form at http://qt.digia.com/ ** ****************************************************************************/ /*! //! [instructions] Plug in the SD card or reader to the development host, and use the following command to find out its device name: \code lsblk -d \endcode Removable devices such as SD cards have the value '1' in the \e RM column. \warning Make sure to select the correct device, because selecting the wrong one can result in a wiped hard drive. Typical device names for SD cards include \c {sdb} and \c {mmcblk0}. The full device path is \c {/dev/} followed by the name. To make sure that the SD card is not mounted, enter the following command, where is the device name: \code umount /dev/ \endcode //! [instructions] */