Rearrange the automatic tests.

Split them into unit and integration tests.  Integration tests really
need to be run on the real platform (not in a VM etc) since they are
somewhat unstable or nonfunctional otherwise.

A few tests were previously broken by QUrl changes and they were repaired.
Removed one test since it was not providing a lot of value.

There are still a number of tests that rely on Q_AUTOTEST_EXPORT symbols.

Change-Id: Ic402abf0af946baa5945075d975b3f584f9ef280
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>

4 files changed, 1147 insertions, 0 deletions

diff --git a/tests/auto/integration/qaudioinput/qaudioinput.pro b/tests/auto/integration/qaudioinput/qaudioinput.pro
new file mode 100644
index 000000000..b70c6ee48
--- /dev/null
+++ b/tests/auto/integration/qaudioinput/qaudioinput.pro
@@ -0,0 +1,12 @@
+TARGET = tst_qaudioinput
+
+QT += core multimedia-private testlib
+CONFIG += no_private_qt_headers_warning
+
+# This is more of a system test
+# CONFIG += testcase
+
+DEFINES += SRCDIR=\\\"$$PWD/\\\"
+
+HEADERS += wavheader.h
+SOURCES += wavheader.cpp tst_qaudioinput.cpp
diff --git a/tests/auto/integration/qaudioinput/tst_qaudioinput.cpp b/tests/auto/integration/qaudioinput/tst_qaudioinput.cpp
new file mode 100755
index 000000000..30ed2e10a
--- /dev/null
+++ b/tests/auto/integration/qaudioinput/tst_qaudioinput.cpp
@@ -0,0 +1,850 @@
+/****************************************************************************
+**
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the test suite of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** GNU Lesser General Public License Usage
+** This file may be used under the terms of the GNU Lesser General Public
+** License version 2.1 as published by the Free Software Foundation and
+** appearing in the file LICENSE.LGPL included in the packaging of this
+** file. Please review the following information to ensure the GNU Lesser
+** General Public License version 2.1 requirements will be met:
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain additional
+** rights. These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU General
+** Public License version 3.0 as published by the Free Software Foundation
+** and appearing in the file LICENSE.GPL included in the packaging of this
+** file. Please review the following information to ensure the GNU General
+** Public License version 3.0 requirements will be met:
+** http://www.gnu.org/copyleft/gpl.html.
+**
+** Other Usage
+** Alternatively, this file may be used in accordance with the terms and
+** conditions contained in a signed written agreement between you and Nokia.
+**
+**
+**
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include <QtTest/QtTest>
+#include <QtCore/qlocale.h>
+
+#include <qaudioinput.h>
+#include <qaudiodeviceinfo.h>
+#include <qaudioformat.h>
+#include <qaudio.h>
+
+#include "wavheader.h"
+
+//TESTED_COMPONENT=src/multimedia
+
+#define AUDIO_BUFFER 192000
+
+#ifndef QTRY_VERIFY2
+#define QTRY_VERIFY2(__expr,__msg) \
+    do { \
+        const int __step = 50; \
+        const int __timeout = 5000; \
+        if (!(__expr)) { \
+            QTest::qWait(0); \
+        } \
+        for (int __i = 0; __i < __timeout && !(__expr); __i+=__step) { \
+            QTest::qWait(__step); \
+        } \
+        QVERIFY2(__expr,__msg); \
+    } while(0)
+#endif
+
+class tst_QAudioInput : public QObject
+{
+    Q_OBJECT
+public:
+    tst_QAudioInput(QObject* parent=0) : QObject(parent) {}
+
+private slots:
+    void initTestCase();
+
+    void format();
+    void invalidFormat_data();
+    void invalidFormat();
+
+    void bufferSize();
+
+    void notifyInterval();
+    void disableNotifyInterval();
+
+    void stopWhileStopped();
+    void suspendWhileStopped();
+    void resumeWhileStopped();
+
+    void pull();
+    void pullSuspendResume();
+
+    void push();
+    void pushSuspendResume();
+
+    void reset();
+
+    void cleanupTestCase();
+
+private:
+    QString formatToFileName(const QAudioFormat &format);
+    QString workingDir();
+
+    QAudioDeviceInfo audioDevice;
+    QList<QAudioFormat> testFormats;
+    QList<QFile*> audioFiles;
+
+    QScopedPointer<QByteArray> m_byteArray;
+    QScopedPointer<QBuffer> m_buffer;
+};
+
+QString tst_QAudioInput::formatToFileName(const QAudioFormat &format)
+{
+    const QString formatEndian = (format.byteOrder() == QAudioFormat::LittleEndian)
+        ?   QString("LE") : QString("BE");
+
+    const QString formatSigned = (format.sampleType() == QAudioFormat::SignedInt)
+        ?   QString("signed") : QString("unsigned");
+
+    return QString("%1_%2_%3_%4_%5")
+        .arg(format.frequency())
+        .arg(format.sampleSize())
+        .arg(formatSigned)
+        .arg(formatEndian)
+        .arg(format.channels());
+}
+
+
+QString tst_QAudioInput::workingDir()
+{
+    QDir working(QString(SRCDIR));
+
+    if (working.exists())
+        return QString(SRCDIR);
+
+    return QDir::currentPath();
+}
+
+void tst_QAudioInput::initTestCase()
+{
+    qRegisterMetaType<QAudioFormat>();
+
+    // Only perform tests if audio output device exists
+    const QList<QAudioDeviceInfo> devices =
+        QAudioDeviceInfo::availableDevices(QAudio::AudioInput);
+
+    if (devices.size() <= 0)
+        QSKIP("No audio backend", SkipAll);
+
+    audioDevice = QAudioDeviceInfo::defaultInputDevice();
+
+
+    QAudioFormat format;
+
+    format.setCodec("audio/pcm");
+
+    if (audioDevice.isFormatSupported(audioDevice.preferredFormat()))
+        testFormats.append(audioDevice.preferredFormat());
+
+    // PCM 8000  mono S8
+    format.setFrequency(8000);
+    format.setSampleSize(8);
+    format.setSampleType(QAudioFormat::SignedInt);
+    format.setByteOrder(QAudioFormat::LittleEndian);
+    format.setChannels(1);
+    if (audioDevice.isFormatSupported(format))
+        testFormats.append(format);
+
+    // PCM 11025 mono S16LE
+    format.setFrequency(11025);
+    format.setSampleSize(16);
+    if (audioDevice.isFormatSupported(format))
+        testFormats.append(format);
+
+    // PCM 22050 mono S16LE
+    format.setFrequency(22050);
+    if (audioDevice.isFormatSupported(format))
+        testFormats.append(format);
+
+    // PCM 22050 stereo S16LE
+    format.setChannels(2);
+    if (audioDevice.isFormatSupported(format))
+        testFormats.append(format);
+
+    // PCM 44100 stereo S16LE
+    format.setFrequency(44100);
+    if (audioDevice.isFormatSupported(format))
+        testFormats.append(format);
+
+    // PCM 48000 stereo S16LE
+    format.setFrequency(48000);
+    if (audioDevice.isFormatSupported(format))
+        testFormats.append(format);
+
+    QVERIFY(testFormats.size());
+
+    foreach (const QAudioFormat &format, testFormats) {
+        QFile* file = new QFile(workingDir() + formatToFileName(format) + QString(".wav"));
+        audioFiles.append(file);
+    }
+}
+
+void tst_QAudioInput::format()
+{
+    QAudioInput audioInput(audioDevice.preferredFormat(), this);
+
+    QAudioFormat requested = audioDevice.preferredFormat();
+    QAudioFormat actual    = audioInput.format();
+
+    QVERIFY2((requested.channels() == actual.channels()),
+            QString("channels: requested=%1, actual=%2").arg(requested.channels()).arg(actual.channels()).toLocal8Bit().constData());
+    QVERIFY2((requested.frequency() == actual.frequency()),
+            QString("frequency: requested=%1, actual=%2").arg(requested.frequency()).arg(actual.frequency()).toLocal8Bit().constData());
+    QVERIFY2((requested.sampleSize() == actual.sampleSize()),
+            QString("sampleSize: requested=%1, actual=%2").arg(requested.sampleSize()).arg(actual.sampleSize()).toLocal8Bit().constData());
+    QVERIFY2((requested.codec() == actual.codec()),
+            QString("codec: requested=%1, actual=%2").arg(requested.codec()).arg(actual.codec()).toLocal8Bit().constData());
+    QVERIFY2((requested.byteOrder() == actual.byteOrder()),
+            QString("byteOrder: requested=%1, actual=%2").arg(requested.byteOrder()).arg(actual.byteOrder()).toLocal8Bit().constData());
+    QVERIFY2((requested.sampleType() == actual.sampleType()),
+            QString("sampleType: requested=%1, actual=%2").arg(requested.sampleType()).arg(actual.sampleType()).toLocal8Bit().constData());
+}
+
+void tst_QAudioInput::invalidFormat_data()
+{
+    QTest::addColumn<QAudioFormat>("invalidFormat");
+
+    QAudioFormat format;
+
+    QTest::newRow("Null Format")
+            << format;
+
+    format = audioDevice.preferredFormat();
+    format.setChannelCount(0);
+    QTest::newRow("Channel count 0")
+            << format;
+
+    format = audioDevice.preferredFormat();
+    format.setSampleRate(0);
+    QTest::newRow("Sample rate 0")
+            << format;
+
+    format = audioDevice.preferredFormat();
+    format.setSampleSize(0);
+    QTest::newRow("Sample size 0")
+            << format;
+}
+
+void tst_QAudioInput::invalidFormat()
+{
+    QFETCH(QAudioFormat, invalidFormat);
+
+    QVERIFY2(!audioDevice.isFormatSupported(invalidFormat),
+            "isFormatSupported() is returning true on an invalid format");
+
+    QAudioInput audioInput(invalidFormat, this);
+
+    // Check that we are in the default state before calling start
+    QVERIFY2((audioInput.state() == QAudio::StoppedState), "state() was not set to StoppedState before start()");
+    QVERIFY2((audioInput.error() == QAudio::NoError), "error() was not set to QAudio::NoError before start()");
+
+    audioInput.start();
+
+    // Check that error is raised
+    QTRY_VERIFY2((audioInput.error() == QAudio::OpenError),"error() was not set to QAudio::OpenError after start()");
+}
+
+void tst_QAudioInput::bufferSize()
+{
+    QAudioInput audioInput(audioDevice.preferredFormat(), this);
+
+    QVERIFY2((audioInput.error() == QAudio::NoError), "error() was not set to QAudio::NoError on creation");
+
+    audioInput.setBufferSize(512);
+    QVERIFY2((audioInput.error() == QAudio::NoError), "error() is not QAudio::NoError after setBufferSize(512)");
+    QVERIFY2((audioInput.bufferSize() == 512),
+            QString("bufferSize: requested=512, actual=%2").arg(audioInput.bufferSize()).toLocal8Bit().constData());
+
+    audioInput.setBufferSize(4096);
+    QVERIFY2((audioInput.error() == QAudio::NoError), "error() is not QAudio::NoError after setBufferSize(4096)");
+    QVERIFY2((audioInput.bufferSize() == 4096),
+            QString("bufferSize: requested=4096, actual=%2").arg(audioInput.bufferSize()).toLocal8Bit().constData());
+
+    audioInput.setBufferSize(8192);
+    QVERIFY2((audioInput.error() == QAudio::NoError), "error() is not QAudio::NoError after setBufferSize(8192)");
+    QVERIFY2((audioInput.bufferSize() == 8192),
+            QString("bufferSize: requested=8192, actual=%2").arg(audioInput.bufferSize()).toLocal8Bit().constData());
+}
+
+void tst_QAudioInput::notifyInterval()
+{
+    QAudioInput audioInput(audioDevice.preferredFormat(), this);
+
+    QVERIFY2((audioInput.error() == QAudio::NoError), "error() was not set to QAudio::NoError on creation");
+
+    audioInput.setNotifyInterval(50);
+    QVERIFY2((audioInput.error() == QAudio::NoError), "error() is not QAudio::NoError after setNotifyInterval(50)");
+    QVERIFY2((audioInput.notifyInterval() == 50),
+            QString("notifyInterval: requested=50, actual=%2").arg(audioInput.notifyInterval()).toLocal8Bit().constData());
+
+    audioInput.setNotifyInterval(100);
+    QVERIFY2((audioInput.error() == QAudio::NoError), "error() is not QAudio::NoError after setNotifyInterval(100)");
+    QVERIFY2((audioInput.notifyInterval() == 100),
+            QString("notifyInterval: requested=100, actual=%2").arg(audioInput.notifyInterval()).toLocal8Bit().constData());
+
+    audioInput.setNotifyInterval(250);
+    QVERIFY2((audioInput.error() == QAudio::NoError), "error() is not QAudio::NoError after setNotifyInterval(250)");
+    QVERIFY2((audioInput.notifyInterval() == 250),
+            QString("notifyInterval: requested=250, actual=%2").arg(audioInput.notifyInterval()).toLocal8Bit().constData());
+
+    audioInput.setNotifyInterval(1000);
+    QVERIFY2((audioInput.error() == QAudio::NoError), "error() is not QAudio::NoError after setNotifyInterval(1000)");
+    QVERIFY2((audioInput.notifyInterval() == 1000),
+            QString("notifyInterval: requested=1000, actual=%2").arg(audioInput.notifyInterval()).toLocal8Bit().constData());
+}
+
+void tst_QAudioInput::disableNotifyInterval()
+{
+    // Sets an invalid notification interval (QAudioInput::setNotifyInterval(0))
+    // Checks that
+    //  - No error is raised (QAudioInput::error() returns QAudio::NoError)
+    //  - if <= 0, set to zero and disable notify signal
+
+    QAudioInput audioInput(audioDevice.preferredFormat(), this);
+
+    QVERIFY2((audioInput.error() == QAudio::NoError), "error() was not set to QAudio::NoError on creation");
+
+    audioInput.setNotifyInterval(0);
+    QVERIFY2((audioInput.error() == QAudio::NoError), "error() is not QAudio::NoError after setNotifyInterval(0)");
+    QVERIFY2((audioInput.notifyInterval() == 0),
+            "notifyInterval() is not zero after setNotifyInterval(0)");
+
+    audioInput.setNotifyInterval(-1);
+    QVERIFY2((audioInput.error() == QAudio::NoError), "error() is not QAudio::NoError after setNotifyInterval(-1)");
+    QVERIFY2((audioInput.notifyInterval() == 0),
+            "notifyInterval() is not zero after setNotifyInterval(-1)");
+
+    //start and run to check if notify() is emitted
+    if (audioFiles.size() > 0) {
+        QAudioInput audioInputCheck(testFormats.at(0), this);
+        audioInputCheck.setNotifyInterval(0);
+        QSignalSpy notifySignal(&audioInputCheck, SIGNAL(notify()));
+        audioFiles.at(0)->open(QIODevice::WriteOnly);
+        audioInputCheck.start(audioFiles.at(0));
+        QTest::qWait(3000); // 3 seconds should be plenty
+        audioInputCheck.stop();
+        QVERIFY2((notifySignal.count() == 0),
+                QString("didn't disable notify interval: shouldn't have got any but got %1").arg(notifySignal.count()).toLocal8Bit().constData());
+        audioFiles.at(0)->close();
+    }
+}
+
+void tst_QAudioInput::stopWhileStopped()
+{
+    // Calls QAudioInput::stop() when object is already in StoppedState
+    // Checks that
+    //  - No state change occurs
+    //  - No error is raised (QAudioInput::error() returns QAudio::NoError)
+
+    QAudioInput audioInput(audioDevice.preferredFormat(), this);
+
+    QVERIFY2((audioInput.state() == QAudio::StoppedState), "state() was not set to StoppedState before start()");
+    QVERIFY2((audioInput.error() == QAudio::NoError), "error() was not set to QAudio::NoError before start()");
+
+    QSignalSpy stateSignal(&audioInput, SIGNAL(stateChanged(QAudio::State)));
+    audioInput.stop();
+
+    // Check that no state transition occurred
+    QVERIFY2((stateSignal.count() == 0), "stop() while stopped is emitting a signal and it shouldn't");
+    QVERIFY2((audioInput.error() == QAudio::NoError), "error() was not set to QAudio::NoError after stop()");
+}
+
+void tst_QAudioInput::suspendWhileStopped()
+{
+    // Calls QAudioInput::suspend() when object is already in StoppedState
+    // Checks that
+    //  - No state change occurs
+    //  - No error is raised (QAudioInput::error() returns QAudio::NoError)
+
+    QAudioInput audioInput(audioDevice.preferredFormat(), this);
+
+    QVERIFY2((audioInput.state() == QAudio::StoppedState), "state() was not set to StoppedState before start()");
+    QVERIFY2((audioInput.error() == QAudio::NoError), "error() was not set to QAudio::NoError before start()");
+
+    QSignalSpy stateSignal(&audioInput, SIGNAL(stateChanged(QAudio::State)));
+    audioInput.suspend();
+
+    // Check that no state transition occurred
+    QVERIFY2((stateSignal.count() == 0), "stop() while suspended is emitting a signal and it shouldn't");
+    QVERIFY2((audioInput.error() == QAudio::NoError), "error() was not set to QAudio::NoError after stop()");
+}
+
+void tst_QAudioInput::resumeWhileStopped()
+{
+    // Calls QAudioInput::resume() when object is already in StoppedState
+    // Checks that
+    //  - No state change occurs
+    //  - No error is raised (QAudioInput::error() returns QAudio::NoError)
+
+    QAudioInput audioInput(audioDevice.preferredFormat(), this);
+
+    QVERIFY2((audioInput.state() == QAudio::StoppedState), "state() was not set to StoppedState before start()");
+    QVERIFY2((audioInput.error() == QAudio::NoError), "error() was not set to QAudio::NoError before start()");
+
+    QSignalSpy stateSignal(&audioInput, SIGNAL(stateChanged(QAudio::State)));
+    audioInput.resume();
+
+    // Check that no state transition occurred
+    QVERIFY2((stateSignal.count() == 0), "resume() while stopped is emitting a signal and it shouldn't");
+    QVERIFY2((audioInput.error() == QAudio::NoError), "error() was not set to QAudio::NoError after resume()");
+}
+
+void tst_QAudioInput::pull()
+{
+    for(int i=0; i<audioFiles.count(); i++) {
+        QAudioInput audioInput(testFormats.at(i), this);
+
+        audioInput.setNotifyInterval(100);
+
+        QSignalSpy notifySignal(&audioInput, SIGNAL(notify()));
+        QSignalSpy stateSignal(&audioInput, SIGNAL(stateChanged(QAudio::State)));
+
+        // Check that we are in the default state before calling start
+        QVERIFY2((audioInput.state() == QAudio::StoppedState), "state() was not set to StoppedState before start()");
+        QVERIFY2((audioInput.error() == QAudio::NoError), "error() was not set to QAudio::NoError before start()");
+        QVERIFY2((audioInput.elapsedUSecs() == qint64(0)),"elapsedUSecs() not zero on creation");
+
+        audioFiles.at(i)->close();
+        audioFiles.at(i)->open(QIODevice::WriteOnly);
+        WavHeader wavHeader(testFormats.at(i));
+        QVERIFY(wavHeader.write(*audioFiles.at(i)));
+
+        audioInput.start(audioFiles.at(i));
+
+        // Check that QAudioInput immediately transitions to ActiveState or IdleState
+        QTRY_VERIFY2((stateSignal.count() > 0),"didn't emit signals on start()");
+        QVERIFY2((audioInput.state() == QAudio::ActiveState || audioInput.state() == QAudio::IdleState),
+                "didn't transition to ActiveState or IdleState after start()");
+        QVERIFY2((audioInput.error() == QAudio::NoError), "error state is not equal to QAudio::NoError after start()");
+        QVERIFY(audioInput.periodSize() > 0);
+        stateSignal.clear();
+
+        // Check that 'elapsed' increases
+        QTest::qWait(40);
+        QVERIFY2((audioInput.elapsedUSecs() > 0), "elapsedUSecs() is still zero after start()");
+
+        // Allow some recording to happen
+        QTest::qWait(3000); // 3 seconds should be plenty
+
+        stateSignal.clear();
+
+        qint64 processedUs = audioInput.processedUSecs();
+
+        audioInput.stop();
+        QTest::qWait(40);
+        QVERIFY2((stateSignal.count() == 1),
+            QString("didn't emit StoppedState signal after stop(), got %1 signals instead").arg(stateSignal.count()).toLocal8Bit().constData());
+        QVERIFY2((audioInput.state() == QAudio::StoppedState), "didn't transitions to StoppedState after stop()");
+
+        QVERIFY2((processedUs > 2800000 && processedUs < 3200000),
+                QString("processedUSecs() doesn't fall in acceptable range, should be 3040000 (%1)").arg(processedUs).toLocal8Bit().constData());
+        QVERIFY2((audioInput.error() == QAudio::NoError), "error() is not QAudio::NoError after stop()");
+        QVERIFY2((audioInput.elapsedUSecs() == (qint64)0), "elapsedUSecs() not equal to zero in StoppedState");
+        QVERIFY2((notifySignal.count() > 20 && notifySignal.count() < 40),
+                QString("notify() signals emitted (%1) should be 30").arg(notifySignal.count()).toLocal8Bit().constData());
+
+        WavHeader::writeDataLength(*audioFiles.at(i),audioFiles.at(i)->pos()-WavHeader::headerLength());
+        audioFiles.at(i)->close();
+    }
+}
+
+void tst_QAudioInput::pullSuspendResume()
+{
+    for(int i=0; i<audioFiles.count(); i++) {
+        QAudioInput audioInput(testFormats.at(i), this);
+
+        audioInput.setNotifyInterval(100);
+
+        QSignalSpy notifySignal(&audioInput, SIGNAL(notify()));
+        QSignalSpy stateSignal(&audioInput, SIGNAL(stateChanged(QAudio::State)));
+
+        // Check that we are in the default state before calling start
+        QVERIFY2((audioInput.state() == QAudio::StoppedState), "state() was not set to StoppedState before start()");
+        QVERIFY2((audioInput.error() == QAudio::NoError), "error() was not set to QAudio::NoError before start()");
+        QVERIFY2((audioInput.elapsedUSecs() == qint64(0)),"elapsedUSecs() not zero on creation");
+
+        audioFiles.at(i)->close();
+        audioFiles.at(i)->open(QIODevice::WriteOnly);
+        WavHeader wavHeader(testFormats.at(i));
+        QVERIFY(wavHeader.write(*audioFiles.at(i)));
+
+        audioInput.start(audioFiles.at(i));
+
+        // Check that QAudioInput immediately transitions to ActiveState or IdleState
+        QTRY_VERIFY2((stateSignal.count() > 0),"didn't emit signals on start()");
+        QVERIFY2((audioInput.state() == QAudio::ActiveState || audioInput.state() == QAudio::IdleState),
+                "didn't transition to ActiveState or IdleState after start()");
+        QVERIFY2((audioInput.error() == QAudio::NoError), "error state is not equal to QAudio::NoError after start()");
+        QVERIFY(audioInput.periodSize() > 0);
+        stateSignal.clear();
+
+        // Check that 'elapsed' increases
+        QTest::qWait(40);
+        QVERIFY2((audioInput.elapsedUSecs() > 0), "elapsedUSecs() is still zero after start()");
+
+        // Allow some recording to happen
+        QTest::qWait(3000); // 3 seconds should be plenty
+
+        QVERIFY2((audioInput.state() == QAudio::ActiveState),
+                "didn't transition to ActiveState after some recording");
+        QVERIFY2((audioInput.error() == QAudio::NoError), "error state is not equal to QAudio::NoError after some recording");
+
+        stateSignal.clear();
+
+        audioInput.suspend();
+
+        // Give backends running in separate threads a chance to suspend.
+        QTest::qWait(100);
+
+        QVERIFY2((stateSignal.count() == 1),
+            QString("didn't emit SuspendedState signal after suspend(), got %1 signals instead").arg(stateSignal.count()).toLocal8Bit().constData());
+        QVERIFY2((audioInput.state() == QAudio::SuspendedState), "didn't transitions to SuspendedState after stop()");
+        QVERIFY2((audioInput.error() == QAudio::NoError), "error() is not QAudio::NoError after stop()");
+        stateSignal.clear();
+
+        // Check that only 'elapsed', and not 'processed' increases while suspended
+        qint64 elapsedUs = audioInput.elapsedUSecs();
+        qint64 processedUs = audioInput.processedUSecs();
+        QTest::qWait(1000);
+        QVERIFY(audioInput.elapsedUSecs() > elapsedUs);
+        QVERIFY(audioInput.processedUSecs() == processedUs);
+
+        audioInput.resume();
+
+        // Give backends running in separate threads a chance to resume.
+        QTest::qWait(100);
+
+        // Check that QAudioInput immediately transitions to ActiveState
+        QVERIFY2((stateSignal.count() == 1),
+                QString("didn't emit signal after resume(), got %1 signals instead").arg(stateSignal.count()).toLocal8Bit().constData());
+        QVERIFY2((audioInput.state() == QAudio::ActiveState), "didn't transition to ActiveState after resume()");
+        QVERIFY2((audioInput.error() == QAudio::NoError), "error state is not equal to QAudio::NoError after resume()");
+        stateSignal.clear();
+
+        processedUs = audioInput.processedUSecs();
+
+        audioInput.stop();
+        QTest::qWait(40);
+        QVERIFY2((stateSignal.count() == 1),
+            QString("didn't emit StoppedState signal after stop(), got %1 signals instead").arg(stateSignal.count()).toLocal8Bit().constData());
+        QVERIFY2((audioInput.state() == QAudio::StoppedState), "didn't transitions to StoppedState after stop()");
+
+        QVERIFY2((processedUs > 2800000 && processedUs < 3200000),
+                QString("processedUSecs() doesn't fall in acceptable range, should be 3040000 (%1)").arg(processedUs).toLocal8Bit().constData());
+        QVERIFY2((audioInput.error() == QAudio::NoError), "error() is not QAudio::NoError after stop()");
+        QVERIFY2((audioInput.elapsedUSecs() == (qint64)0), "elapsedUSecs() not equal to zero in StoppedState");
+        QVERIFY2((notifySignal.count() > 20 && notifySignal.count() < 40),
+                QString("notify() signals emitted (%1) should be 30").arg(notifySignal.count()).toLocal8Bit().constData());
+
+        WavHeader::writeDataLength(*audioFiles.at(i),audioFiles.at(i)->pos()-WavHeader::headerLength());
+        audioFiles.at(i)->close();
+    }
+}
+
+void tst_QAudioInput::push()
+{
+    for(int i=0; i<audioFiles.count(); i++) {
+        QAudioInput audioInput(testFormats.at(i), this);
+
+        audioInput.setNotifyInterval(100);
+
+        QSignalSpy notifySignal(&audioInput, SIGNAL(notify()));
+        QSignalSpy stateSignal(&audioInput, SIGNAL(stateChanged(QAudio::State)));
+
+        // Check that we are in the default state before calling start
+        QVERIFY2((audioInput.state() == QAudio::StoppedState), "state() was not set to StoppedState before start()");
+        QVERIFY2((audioInput.error() == QAudio::NoError), "error() was not set to QAudio::NoError before start()");
+        QVERIFY2((audioInput.elapsedUSecs() == qint64(0)),"elapsedUSecs() not zero on creation");
+
+        audioFiles.at(i)->close();
+        audioFiles.at(i)->open(QIODevice::WriteOnly);
+        WavHeader wavHeader(testFormats.at(i));
+        QVERIFY(wavHeader.write(*audioFiles.at(i)));
+
+        QIODevice* feed = audioInput.start();
+
+        // Check that QAudioInput immediately transitions to IdleState
+        QTRY_VERIFY2((stateSignal.count() == 1),"didn't emit IdleState signal on start()");
+        QVERIFY2((audioInput.state() == QAudio::IdleState),
+                "didn't transition to IdleState after start()");
+        QVERIFY2((audioInput.error() == QAudio::NoError), "error state is not equal to QAudio::NoError after start()");
+        QVERIFY(audioInput.periodSize() > 0);
+        stateSignal.clear();
+
+        // Check that 'elapsed' increases
+        QTest::qWait(40);
+        QVERIFY2((audioInput.elapsedUSecs() > 0), "elapsedUSecs() is still zero after start()");
+
+        qint64 totalBytesRead = 0;
+        bool firstBuffer = true;
+        QByteArray buffer(AUDIO_BUFFER, 0);
+        qint64 len = (testFormats.at(i).frequency()*testFormats.at(i).channels()*(testFormats.at(i).sampleSize()/8)*2); // 2 seconds
+        while (totalBytesRead < len) {
+            if (audioInput.bytesReady() >= audioInput.periodSize()) {
+                qint64 bytesRead = feed->read(buffer.data(), audioInput.periodSize());
+                audioFiles.at(i)->write(buffer.constData(),bytesRead);
+                totalBytesRead+=bytesRead;
+                if (firstBuffer && bytesRead) {
+                    // Check for transition to ActiveState when data is provided
+                    QVERIFY2((stateSignal.count() == 1),"didn't emit ActiveState signal on data");
+                    QVERIFY2((audioInput.state() == QAudio::ActiveState),
+                            "didn't transition to ActiveState after data");
+                    QVERIFY2((audioInput.error() == QAudio::NoError), "error state is not equal to QAudio::NoError after start()");
+                    firstBuffer = false;
+                }
+            } else
+                QTest::qWait(20);
+        }
+
+        QTest::qWait(1000);
+
+        stateSignal.clear();
+
+        qint64 processedUs = audioInput.processedUSecs();
+
+        audioInput.stop();
+        QTest::qWait(40);
+        QVERIFY2((stateSignal.count() == 1),
+            QString("didn't emit StoppedState signal after stop(), got %1 signals instead").arg(stateSignal.count()).toLocal8Bit().constData());
+        QVERIFY2((audioInput.state() == QAudio::StoppedState), "didn't transitions to StoppedState after stop()");
+
+        QVERIFY2((processedUs > 1800000 && processedUs < 2200000),
+                QString("processedUSecs() doesn't fall in acceptable range, should be 2040000 (%1)").arg(processedUs).toLocal8Bit().constData());
+        QVERIFY2((audioInput.error() == QAudio::NoError), "error() is not QAudio::NoError after stop()");
+        QVERIFY2((audioInput.elapsedUSecs() == (qint64)0), "elapsedUSecs() not equal to zero in StoppedState");
+        QVERIFY2((notifySignal.count() > 20 && notifySignal.count() < 40),
+                QString("notify() signals emitted (%1) should be 30").arg(notifySignal.count()).toLocal8Bit().constData());
+
+        WavHeader::writeDataLength(*audioFiles.at(i),audioFiles.at(i)->pos()-WavHeader::headerLength());
+        audioFiles.at(i)->close();
+    }
+}
+
+void tst_QAudioInput::pushSuspendResume()
+{
+    for(int i=0; i<audioFiles.count(); i++) {
+        QAudioInput audioInput(testFormats.at(i), this);
+
+        audioInput.setNotifyInterval(100);
+
+        QSignalSpy notifySignal(&audioInput, SIGNAL(notify()));
+        QSignalSpy stateSignal(&audioInput, SIGNAL(stateChanged(QAudio::State)));
+
+        // Check that we are in the default state before calling start
+        QVERIFY2((audioInput.state() == QAudio::StoppedState), "state() was not set to StoppedState before start()");
+        QVERIFY2((audioInput.error() == QAudio::NoError), "error() was not set to QAudio::NoError before start()");
+        QVERIFY2((audioInput.elapsedUSecs() == qint64(0)),"elapsedUSecs() not zero on creation");
+
+        audioFiles.at(i)->close();
+        audioFiles.at(i)->open(QIODevice::WriteOnly);
+        WavHeader wavHeader(testFormats.at(i));
+        QVERIFY(wavHeader.write(*audioFiles.at(i)));
+
+        QIODevice* feed = audioInput.start();
+
+        // Check that QAudioInput immediately transitions to IdleState
+        QTRY_VERIFY2((stateSignal.count() == 1),"didn't emit IdleState signal on start()");
+        QVERIFY2((audioInput.state() == QAudio::IdleState),
+                "didn't transition to IdleState after start()");
+        QVERIFY2((audioInput.error() == QAudio::NoError), "error state is not equal to QAudio::NoError after start()");
+        QVERIFY(audioInput.periodSize() > 0);
+        stateSignal.clear();
+
+        // Check that 'elapsed' increases
+        QTest::qWait(40);
+        QVERIFY2((audioInput.elapsedUSecs() > 0), "elapsedUSecs() is still zero after start()");
+
+        qint64 totalBytesRead = 0;
+        bool firstBuffer = true;
+        QByteArray buffer(AUDIO_BUFFER, 0);
+        qint64 len = (testFormats.at(i).frequency()*testFormats.at(i).channels()*(testFormats.at(i).sampleSize()/8)); // 1 seconds
+        while (totalBytesRead < len) {
+            if (audioInput.bytesReady() >= audioInput.periodSize()) {
+                qint64 bytesRead = feed->read(buffer.data(), audioInput.periodSize());
+                audioFiles.at(i)->write(buffer.constData(),bytesRead);
+                totalBytesRead+=bytesRead;
+                if (firstBuffer && bytesRead) {
+                    // Check for transition to ActiveState when data is provided
+                    QVERIFY2((stateSignal.count() == 1),"didn't emit ActiveState signal on data");
+                    QVERIFY2((audioInput.state() == QAudio::ActiveState),
+                            "didn't transition to ActiveState after data");
+                    QVERIFY2((audioInput.error() == QAudio::NoError), "error state is not equal to QAudio::NoError after start()");
+                    firstBuffer = false;
+                }
+            } else
+                QTest::qWait(20);
+        }
+        stateSignal.clear();
+
+        audioInput.suspend();
+
+        // Give backends running in separate threads a chance to suspend
+        QTest::qWait(100);
+
+        QVERIFY2((stateSignal.count() == 1),
+            QString("didn't emit SuspendedState signal after suspend(), got %1 signals instead").arg(stateSignal.count()).toLocal8Bit().constData());
+        QVERIFY2((audioInput.state() == QAudio::SuspendedState), "didn't transitions to SuspendedState after stop()");
+        QVERIFY2((audioInput.error() == QAudio::NoError), "error() is not QAudio::NoError after stop()");
+        stateSignal.clear();
+
+        // Check that only 'elapsed', and not 'processed' increases while suspended
+        qint64 elapsedUs = audioInput.elapsedUSecs();
+        qint64 processedUs = audioInput.processedUSecs();
+        QTest::qWait(1000);
+        QVERIFY(audioInput.elapsedUSecs() > elapsedUs);
+        QVERIFY(audioInput.processedUSecs() == processedUs);
+
+        audioInput.resume();
+
+        // Give backends running in separate threads a chance to resume.
+        QTest::qWait(100);
+
+        // Check that QAudioInput immediately transitions to Active or IdleState
+        QVERIFY2((stateSignal.count() > 0),"didn't emit signals on resume()");
+        QVERIFY2((audioInput.state() == QAudio::ActiveState || audioInput.state() == QAudio::IdleState),
+                "didn't transition to ActiveState or IdleState after resume()");
+        QVERIFY2((audioInput.error() == QAudio::NoError), "error state is not equal to QAudio::NoError after resume()");
+        QVERIFY(audioInput.periodSize() > 0);
+
+        // Let it play out what is in buffer and go to Idle before continue
+        QTest::qWait(1000);
+        stateSignal.clear();
+
+        // Read another seconds worth
+        totalBytesRead = 0;
+        firstBuffer = true;
+        while (totalBytesRead < len) {
+            if (audioInput.bytesReady() >= audioInput.periodSize()) {
+                qint64 bytesRead = feed->read(buffer.data(), audioInput.periodSize());
+                audioFiles.at(i)->write(buffer.constData(),bytesRead);
+                totalBytesRead+=bytesRead;
+            } else
+                QTest::qWait(20);
+        }
+        stateSignal.clear();
+
+        processedUs = audioInput.processedUSecs();
+
+        audioInput.stop();
+        QTest::qWait(40);
+        QVERIFY2((stateSignal.count() == 1),
+            QString("didn't emit StoppedState signal after stop(), got %1 signals instead").arg(stateSignal.count()).toLocal8Bit().constData());
+        QVERIFY2((audioInput.state() == QAudio::StoppedState), "didn't transitions to StoppedState after stop()");
+
+        QVERIFY2((processedUs > 1800000 && processedUs < 2200000),
+                QString("processedUSecs() doesn't fall in acceptable range, should be 2040000 (%1)").arg(processedUs).toLocal8Bit().constData());
+        QVERIFY2((audioInput.elapsedUSecs() == (qint64)0), "elapsedUSecs() not equal to zero in StoppedState");
+
+        WavHeader::writeDataLength(*audioFiles.at(i),audioFiles.at(i)->pos()-WavHeader::headerLength());
+        audioFiles.at(i)->close();
+    }
+}
+
+void tst_QAudioInput::reset()
+{
+    for(int i=0; i<audioFiles.count(); i++) {
+
+        // Try both push/pull.. the vagaries of Active vs Idle are tested elsewhere
+        {
+            QAudioInput audioInput(testFormats.at(i), this);
+
+            audioInput.setNotifyInterval(100);
+
+            QSignalSpy notifySignal(&audioInput, SIGNAL(notify()));
+            QSignalSpy stateSignal(&audioInput, SIGNAL(stateChanged(QAudio::State)));
+
+            // Check that we are in the default state before calling start
+            QVERIFY2((audioInput.state() == QAudio::StoppedState), "state() was not set to StoppedState before start()");
+            QVERIFY2((audioInput.error() == QAudio::NoError), "error() was not set to QAudio::NoError before start()");
+            QVERIFY2((audioInput.elapsedUSecs() == qint64(0)),"elapsedUSecs() not zero on creation");
+
+            QIODevice* device = audioInput.start();
+            // Check that QAudioInput immediately transitions to IdleState
+            QTRY_VERIFY2((stateSignal.count() == 1),"didn't emit IdleState signal on start()");
+            QVERIFY2((audioInput.state() == QAudio::IdleState), "didn't transition to IdleState after start()");
+            QVERIFY2((audioInput.error() == QAudio::NoError), "error state is not equal to QAudio::NoError after start()");
+            QVERIFY(audioInput.periodSize() > 0);
+            QTRY_VERIFY2((audioInput.bytesReady() > 0), "no bytes available after starting");
+
+            // Trigger a read
+            QByteArray data = device->read(1);
+
+            QTRY_VERIFY2((audioInput.state() == QAudio::ActiveState), "didn't transition to ActiveState after read()");
+            QVERIFY2((audioInput.error() == QAudio::NoError), "error state is not equal to QAudio::NoError after start()");
+            stateSignal.clear();
+
+            audioInput.reset();
+            QTRY_VERIFY2((stateSignal.count() == 1),"didn't emit StoppedState signal after reset()");
+            QVERIFY2((audioInput.state() == QAudio::StoppedState), "didn't transitions to StoppedState after reset()");
+            QVERIFY2((audioInput.bytesReady() == 0), "buffer not cleared after reset()");
+        }
+
+        {
+            QAudioInput audioInput(testFormats.at(i), this);
+            QBuffer buffer;
+
+            audioInput.setNotifyInterval(100);
+
+            QSignalSpy notifySignal(&audioInput, SIGNAL(notify()));
+            QSignalSpy stateSignal(&audioInput, SIGNAL(stateChanged(QAudio::State)));
+
+            // Check that we are in the default state before calling start
+            QVERIFY2((audioInput.state() == QAudio::StoppedState), "state() was not set to StoppedState before start()");
+            QVERIFY2((audioInput.error() == QAudio::NoError), "error() was not set to QAudio::NoError before start()");
+            QVERIFY2((audioInput.elapsedUSecs() == qint64(0)),"elapsedUSecs() not zero on creation");
+
+            audioInput.start(&buffer);
+
+            // Check that QAudioInput immediately transitions to ActiveState
+            QTRY_VERIFY2((stateSignal.count() >= 1),"didn't emit state changed signal on start()");
+            QTRY_VERIFY2((audioInput.state() == QAudio::ActiveState), "didn't transition to ActiveState after start()");
+            QVERIFY2((audioInput.error() == QAudio::NoError), "error state is not equal to QAudio::NoError after start()");
+            QVERIFY(audioInput.periodSize() > 0);
+            QTRY_VERIFY2((audioInput.bytesReady() > 0), "no bytes available after starting");
+            stateSignal.clear();
+
+            audioInput.reset();
+            QTRY_VERIFY2((stateSignal.count() == 1),"didn't emit StoppedState signal after reset()");
+            QVERIFY2((audioInput.state() == QAudio::StoppedState), "didn't transitions to StoppedState after reset()");
+            QVERIFY2((audioInput.bytesReady() == 0), "buffer not cleared after reset()");
+        }
+    }
+}
+
+void tst_QAudioInput::cleanupTestCase()
+{
+    QFile* file;
+
+    foreach (file, audioFiles) {
+        file->remove();
+        delete file;
+    }
+}
+
+QTEST_MAIN(tst_QAudioInput)
+
+#include "tst_qaudioinput.moc"
diff --git a/tests/auto/integration/qaudioinput/wavheader.cpp b/tests/auto/integration/qaudioinput/wavheader.cpp
new file mode 100755
index 000000000..26fcd6f98
--- /dev/null
+++ b/tests/auto/integration/qaudioinput/wavheader.cpp
@@ -0,0 +1,205 @@
+/****************************************************************************
+**
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the test suite of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** GNU Lesser General Public License Usage
+** This file may be used under the terms of the GNU Lesser General Public
+** License version 2.1 as published by the Free Software Foundation and
+** appearing in the file LICENSE.LGPL included in the packaging of this
+** file. Please review the following information to ensure the GNU Lesser
+** General Public License version 2.1 requirements will be met:
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain additional
+** rights. These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU General
+** Public License version 3.0 as published by the Free Software Foundation
+** and appearing in the file LICENSE.GPL included in the packaging of this
+** file. Please review the following information to ensure the GNU General
+** Public License version 3.0 requirements will be met:
+** http://www.gnu.org/copyleft/gpl.html.
+**
+** Other Usage
+** Alternatively, this file may be used in accordance with the terms and
+** conditions contained in a signed written agreement between you and Nokia.
+**
+**
+**
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include <QtCore/qendian.h>
+#include "wavheader.h"
+
+
+struct chunk
+{
+    char        id[4];
+    quint32     size;
+};
+
+struct RIFFHeader
+{
+    chunk       descriptor;     // "RIFF"
+    char        type[4];        // "WAVE"
+};
+
+struct WAVEHeader
+{
+    chunk       descriptor;
+    quint16     audioFormat;
+    quint16     numChannels;
+    quint32     sampleRate;
+    quint32     byteRate;
+    quint16     blockAlign;
+    quint16     bitsPerSample;
+};
+
+struct DATAHeader
+{
+    chunk       descriptor;
+};
+
+struct CombinedHeader
+{
+    RIFFHeader  riff;
+    WAVEHeader  wave;
+    DATAHeader  data;
+};
+
+static const int HeaderLength = sizeof(CombinedHeader);
+
+
+WavHeader::WavHeader(const QAudioFormat &format, qint64 dataLength)
+    :   m_format(format)
+    ,   m_dataLength(dataLength)
+{
+
+}
+
+bool WavHeader::read(QIODevice &device)
+{
+    bool result = true;
+
+    if (!device.isSequential())
+        result = device.seek(0);
+    // else, assume that current position is the start of the header
+
+    if (result) {
+        CombinedHeader header;
+        result = (device.read(reinterpret_cast<char *>(&header), HeaderLength) == HeaderLength);
+        if (result) {
+            if ((memcmp(&header.riff.descriptor.id, "RIFF", 4) == 0
+                || memcmp(&header.riff.descriptor.id, "RIFX", 4) == 0)
+                && memcmp(&header.riff.type, "WAVE", 4) == 0
+                && memcmp(&header.wave.descriptor.id, "fmt ", 4) == 0
+                && header.wave.audioFormat == 1 // PCM
+            ) {
+                if (memcmp(&header.riff.descriptor.id, "RIFF", 4) == 0)
+                    m_format.setByteOrder(QAudioFormat::LittleEndian);
+                else
+                    m_format.setByteOrder(QAudioFormat::BigEndian);
+
+                m_format.setChannels(qFromLittleEndian<quint16>(header.wave.numChannels));
+                m_format.setCodec("audio/pcm");
+                m_format.setFrequency(qFromLittleEndian<quint32>(header.wave.sampleRate));
+                m_format.setSampleSize(qFromLittleEndian<quint16>(header.wave.bitsPerSample));
+
+                switch(header.wave.bitsPerSample) {
+                case 8:
+                    m_format.setSampleType(QAudioFormat::UnSignedInt);
+                    break;
+                case 16:
+                    m_format.setSampleType(QAudioFormat::SignedInt);
+                    break;
+                default:
+                    result = false;
+                }
+
+                m_dataLength = device.size() - HeaderLength;
+            } else {
+                result = false;
+            }
+        }
+    }
+
+    return result;
+}
+
+bool WavHeader::write(QIODevice &device)
+{
+    CombinedHeader header;
+
+    memset(&header, 0, HeaderLength);
+
+    // RIFF header
+    if (m_format.byteOrder() == QAudioFormat::LittleEndian)
+        memcpy(header.riff.descriptor.id,"RIFF",4);
+    else
+        memcpy(header.riff.descriptor.id,"RIFX",4);
+    qToLittleEndian<quint32>(quint32(m_dataLength + HeaderLength - 8),
+                             reinterpret_cast<unsigned char*>(&header.riff.descriptor.size));
+    memcpy(header.riff.type, "WAVE",4);
+
+    // WAVE header
+    memcpy(header.wave.descriptor.id,"fmt ",4);
+    qToLittleEndian<quint32>(quint32(16),
+                             reinterpret_cast<unsigned char*>(&header.wave.descriptor.size));
+    qToLittleEndian<quint16>(quint16(1),
+                             reinterpret_cast<unsigned char*>(&header.wave.audioFormat));
+    qToLittleEndian<quint16>(quint16(m_format.channels()),
+                             reinterpret_cast<unsigned char*>(&header.wave.numChannels));
+    qToLittleEndian<quint32>(quint32(m_format.frequency()),
+                             reinterpret_cast<unsigned char*>(&header.wave.sampleRate));
+    qToLittleEndian<quint32>(quint32(m_format.frequency() * m_format.channels() * m_format.sampleSize() / 8),
+                             reinterpret_cast<unsigned char*>(&header.wave.byteRate));
+    qToLittleEndian<quint16>(quint16(m_format.channels() * m_format.sampleSize() / 8),
+                             reinterpret_cast<unsigned char*>(&header.wave.blockAlign));
+    qToLittleEndian<quint16>(quint16(m_format.sampleSize()),
+                             reinterpret_cast<unsigned char*>(&header.wave.bitsPerSample));
+
+    // DATA header
+    memcpy(header.data.descriptor.id,"data",4);
+    qToLittleEndian<quint32>(quint32(m_dataLength),
+                             reinterpret_cast<unsigned char*>(&header.data.descriptor.size));
+
+    return (device.write(reinterpret_cast<const char *>(&header), HeaderLength) == HeaderLength);
+}
+
+const QAudioFormat& WavHeader::format() const
+{
+    return m_format;
+}
+
+qint64 WavHeader::dataLength() const
+{
+    return m_dataLength;
+}
+
+qint64 WavHeader::headerLength()
+{
+    return HeaderLength;
+}
+
+bool WavHeader::writeDataLength(QIODevice &device, qint64 dataLength)
+{
+    bool result = false;
+    if (!device.isSequential()) {
+        device.seek(40);
+        unsigned char dataLengthLE[4];
+        qToLittleEndian<quint32>(quint32(dataLength), dataLengthLE);
+        result = (device.write(reinterpret_cast<const char *>(dataLengthLE), 4) == 4);
+    }
+    return result;
+}
diff --git a/tests/auto/integration/qaudioinput/wavheader.h b/tests/auto/integration/qaudioinput/wavheader.h
new file mode 100755
index 000000000..4136da027
--- /dev/null
+++ b/tests/auto/integration/qaudioinput/wavheader.h
@@ -0,0 +1,80 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the test suite of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** GNU Lesser General Public License Usage
+** This file may be used under the terms of the GNU Lesser General Public
+** License version 2.1 as published by the Free Software Foundation and
+** appearing in the file LICENSE.LGPL included in the packaging of this
+** file. Please review the following information to ensure the GNU Lesser
+** General Public License version 2.1 requirements will be met:
+** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain additional
+** rights. These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU General
+** Public License version 3.0 as published by the Free Software Foundation
+** and appearing in the file LICENSE.GPL included in the packaging of this
+** file. Please review the following information to ensure the GNU General
+** Public License version 3.0 requirements will be met:
+** http://www.gnu.org/copyleft/gpl.html.
+**
+** Other Usage
+** Alternatively, this file may be used in accordance with the terms and
+** conditions contained in a signed written agreement between you and Nokia.
+**
+**
+**
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+
+#ifndef WAVHEADER_H
+#define WAVHEADER_H
+
+#include <QtCore/qobject.h>
+#include <QtCore/qfile.h>
+#include <qaudioformat.h>
+
+/**
+ * Helper class for parsing WAV file headers.
+ *
+ * See https://ccrma.stanford.edu/courses/422/projects/WaveFormat/
+ */
+class WavHeader
+{
+public:
+    WavHeader(const QAudioFormat &format = QAudioFormat(),
+              qint64 dataLength = 0);
+
+    // Reads WAV header and seeks to start of data
+    bool read(QIODevice &device);
+
+    // Writes WAV header
+    bool write(QIODevice &device);
+
+    const QAudioFormat& format() const;
+    qint64 dataLength() const;
+
+    static qint64 headerLength();
+
+    static bool writeDataLength(QIODevice &device, qint64 dataLength);
+
+private:
+    QAudioFormat m_format;
+    qint64 m_dataLength;
+};
+
+#endif
+