summaryrefslogtreecommitdiffstats
path: root/tests/systemtests/radio
diff options
context:
space:
mode:
authordakovaci <daniel.kovacic@nokia.com>2012-03-19 15:10:36 +1000
committerQt by Nokia <qt-info@nokia.com>2012-03-29 06:35:46 +0200
commit692ee3fe19dc901252813778d42906665deaf878 (patch)
treed6aef40efb16538648a9ec16f5a49e5db119da60 /tests/systemtests/radio
parentd8b688f8af218b0135cf19986729f1f237e821f3 (diff)
Added some radio systemtests, edited
Added some detail to the radio systemtest Edited the Camera systemtest Change-Id: I61c603e5de8e50400053da26563b937756aea316 Reviewed-by: Daron Andrew Edie <daron.edie@nokia.com>
Diffstat (limited to 'tests/systemtests/radio')
-rw-r--r--tests/systemtests/radio/sys_radio.qtt226
1 files changed, 207 insertions, 19 deletions
diff --git a/tests/systemtests/radio/sys_radio.qtt b/tests/systemtests/radio/sys_radio.qtt
index 64e16175f..a56082a66 100644
--- a/tests/systemtests/radio/sys_radio.qtt
+++ b/tests/systemtests/radio/sys_radio.qtt
@@ -52,38 +52,225 @@ A device specific headset is required to be connected to device for radio testin
{
},
- play_a_radio_transmission: function()
+ play_a_radio_transmission: function()
{
// Test meta data
testTitle = "Multimedia - Play Radio Transmission";
testBinary = "radio";
- testSource ="$QTDIR/qtmultimediakit/examples/Radio"
+ testSource ="qt5/qtmultimedia/examples/radio"
testGoal = "Verify that radio stations can be played.";
testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antena to the device and must be connected.";
testGroups = "BAT, 1.2";
// Test steps
- prompt(twiki("---+++ " + testApplication + "<br><br>
+ prompt(twiki("---+++ " + testTitle + "<br><br>
+ *Goal:* " + testGoal + "<br>
+ *Pre-Requisites:* " + testPreconditions + "<br>
+ *Tested Binary:* " + testBinary + "<br>
+
+ | *Step* | *Verification* |
+ | Launch " + testBinary + " | App launches normally |
+ | | If not first time running application on image, verify that you are presented with a list of previously scanned radio stations |
+ | Select a radio station from the list | Verify that the station is properly selected |
+ | Select the power icon next to the station name | Verify that audio from the radio station is now heard through the headphones |
+ | Deselect the power icon next to the station name | Verify that audio from the radio station is no longer heard through the headphones |
+ | Exit the radio application | Verify that the radio application closes cleanly |
+ "));
+ },
+
+ change_a_radio_station: function()
+ {
+ // Test meta data
+ testTitle = "Multimedia - Radio: Change radio station";
+ testBinary = "radio";
+ testSource ="qt5/qtmultimedia/examples/radio"
+ testGoal = "Verify that radio station can be changed from station playlist.";
+ testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected.";
+ testGroups = "BAT, 1.2";
+
+ // Test steps
+ prompt(twiki("---+++ " + testTitle + "<br><br>
+ *Goal:* " + testGoal + "<br>
+ *Pre-Requisites:* " + testPreconditions + "<br>
+ *Tested Binary:* " + testBinary + "<br>
+
+ | *Step* | *Verification* |
+ | Launch " + testBinary + " | App launches normally |
+ | Select a radio station from the list | Verify that the station is heard through the headphones |
+ | If in the visualization view, select the down icon to return to the station selection view | Verify that you are presented with the list of stations |
+ | Select a different station | Verify that you are now listening to a different radio station |
+ | Deselect the power icon next to the station name | Verify that audio from the radio station is no longer heard through the headphones |
+ | Exit the radio application | Verify that the radio application closes cleanly |
+ "));
+ },
+
+ manually_tune_radio_station: function()
+ {
+ // Test meta data
+ testTitle = "Multimedia - Manually tune radio station";
+ testBinary = "radio";
+ testSource ="qt5/qtmultimedia/examples/radio"
+ testGoal = "Verify that user can manualy change radio station.";
+ testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected.";
+ testGroups = "BAT, 1.2";
+
+ // Test steps
+ prompt(twiki("---+++ " + testTitle + "<br><br>
+ *Goal:* " + testGoal + "<br>
+ *Pre-Requisites:* " + testPreconditions + "<br>
+ *Tested Binary:* " + testBinary + "<br>
+
+
+ | *Step* | *Verification* |
+ | Launch " + testBinary + " | App launches normally |
+ | Select a radio station from the list | Verify that the station is heard through the headphones |
+ | Select the up icon to be presented to the visualization view | |
+ | Select the Plus icon on the menu bar | Verify that you are presented with the frequency dial |
+ | Note the current selected frequency | |
+ | Select the dot indicator on the frequency dial, and move finger to right | Verify that the frequency on the indicater is now rising and that the audio has gone off the previous station |
+ | Keep moving selector until a radio station is heard | Verify that the frequency of the selected station is higher than the originaly selected station |
+ | | Verify that the station is playing properly |
+ | Select to save the selected radio station frequency | Verify that the station is saved in the radiostation playlist |
+ | Exit the radio application | Verify that the radio application closes cleanly |
+ "));
+ },
+
+ scan_up_and_down: function()
+ {
+ // Test meta data
+ testTitle = "Multimedia - Scan up and down the frequency";
+ testBinary = "radio";
+ testSource ="qt5/qtmultimedia/examples/radio"
+ testGoal = "Verify that radio can scan up and down the FM frequency.";
+ testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected.";
+ testGroups = "BAT, 1.2";
+
+ // Test steps
+ prompt(twiki("---+++ " + testTitle + "<br><br>
+ *Goal:* " + testGoal + "<br>
+ *Pre-Requisites:* " + testPreconditions + "<br>
+ *Tested Binary:* " + testBinary + "<br>
+
+ | *Step* | *Verification* |
+ | Launch " + testBinary + " | App launches normally |
+ | Select a radio station from the list | Verify that the station is heard through the headphones |
+ | Select the up icon to be presented to the visualization view | |
+ | Select the Plus icon on the menu bar | Verify that you are presented with the frequency dial |
+ | Note the current selected frequency | |
+ | Select the Scan Up Frequency controll | Verify that application has located a new station and that the frequency displayed is of the new station |
+ | | Verify that the station is playing properly |
+ | Select to save the selected radio station frequency | Verify that the station is saved in the radiostation playlist |
+ | Select the Scan Down Frequency control | Verify that application has located the original station and that the frequency displayed is of the original station |
+ | | Verify that the station is playing properly |
+ | Select to save the selected radio station frequency | Verify that the station is saved in the radiostation playlist |
+ | Exit the radio application | Verify that the radio application closes cleanly |
+ "));
+ },
+
+ scan_for_multiple_radio_stations: function()
+ {
+ // Test meta data
+ testTitle = "Multimedia - Radio: Scan for multiple radio station";
+ testBinary = "radio";
+ testSource ="qt5/qtmultimedia/examples/radio"
+ testGoal = "Verify that radio can scan for multiple stations at once.";
+ testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected.";
+ testGroups = "BAT, 1.2";
+
+ // Test steps
+ prompt(twiki("---+++ " + testTitle + "<br><br>
*Goal:* " + testGoal + "<br>
*Pre-Requisites:* " + testPreconditions + "<br>
*Tested Binary:* " + testBinary + "<br>
| *Step* | *Verification* |
| Launch " + testBinary + " | App launches normally |
- | | Verify that 0 KHz and No Signal is displayed |
- | Select [Scan Up] | Audible white noise should be heard as the radio searches for a frequency lock. Frequency should be increasing in 100 KHz steps until a strong signal is found |
- | | Verify that a radio signal can be heard. It is possible for the radio to lock on a silent station signal, in that case progress further up the frequencies |
- | Once a strong audible signal is found | Verify that the stations frequency and Got Signal message is displayed |
- | Select [Scan Up] | Verify that the radio has moved off the previous station and in progressing through the frequencies |
- | Once on a radio station, Select [Freq Up] | Verify that the radio frequency has moved off the station by 100KHz and is stationary |
- | Select [Freq Up] again | Verify that the radio frequency has moved up another 100KHz and is stationary |
- | Select [Freq Down] twice | Verify that you are now at the frequency of the previous radio station and that the signal is audible |
- | Select [Scan Down] | Verify that the radio has moved off the previous station, progressing through the frequencies, and finds the original station from this test |
- | Exit the radio application | Verify that the radio station is no longer heard |
+ | On the menu, select Find new station | In the Radio Dialog Scanning view, observe the number of stations found |
+ | Exit the radio application | Verify that the radio application closes cleanly |
"));
},
- radio_interrupted_by_system_notification: function()
+ save_radio_station_list: function()
+ {
+ // Test meta data
+ testTitle = "Multimedia - Radio: Save station playlist";
+ testBinary = "radio";
+ testSource ="qt5/qtmultimedia/examples/radio""
+ testGoal = "Verify that radio can save station playist.";
+ testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected.";
+ testGroups = "BAT, 1.2";
+
+ // Test steps
+ prompt(twiki("---+++ " + testTitle + "<br><br>
+ *Goal:* " + testGoal + "<br>
+ *Pre-Requisites:* " + testPreconditions + "<br>
+ *Tested Binary:* " + testBinary + "<br>
+
+ | *Step* | *Verification* |
+ | Launch " + testBinary + " | App launches normally |
+ | Select to scan for multiple stations | Verify that multiple stations have been found |
+ | Select to save station playlist | |
+ | Close application | Verify that the application closes |
+ | Reopen " + testBinary + " | Verify that the app launches normally |
+ | Go to station playlist | Verify that the stations from the previous search are listed |
+ | Select various stations from playlist | Verify that radio station play properly |
+ | Close application | Verify that radio application closes properly |
+ "));
+ },
+
+ switch_audio_to_speakers: function()
+ {
+ // Test meta data
+ testTitle = "Multimedia - Radio: Switch audio to speakers";
+ testBinary = "radio";
+ testSource ="qt5/qtmultimedia/examples/radio"
+ testGoal = "Verify that radio can be output to external speakers.";
+ testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected.";
+ testGroups = "BAT, 1.2";
+
+
+ // Test steps
+ prompt(twiki("---+++ " + testTitle + "<br><br>
+ *Goal:* " + testGoal + "<br>
+ *Pre-Requisites:* " + testPreconditions + "<br>
+ *Tested Binary:* " + testBinary + "<br>
+
+ | *Step* | *Verification* |
+ | Launch " + testBinary + " | App launches normally |
+ | Select an audible radio station | Verify that the station can be heard through the speakers |
+ | Select from station menu: Turn On loudspaeker | Verify that the audio can be heard through the device speakers |
+ | Select from the station menu: Turn Off Loudspeakers | Verify that the audio has now reverted back to the headphones |
+ | Close application | Verify that radio application closes properly |
+ "));
+ },
+
+ handle_headset_removal: function()
+ {
+ // Test meta data
+ testTitle = "Multimedia - Radio: Handle headset removal";
+ testBinary = "radio";
+ testSource ="qt5/qtmultimedia/examples/radio"
+ testGoal = "Verify that radio can handle removal and insertion of headset.";
+ testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected.";
+ testGroups = "BAT, 1.2";
+
+
+ // Test steps
+ prompt(twiki("---+++ " + testTitle + "<br><br>
+ *Goal:* " + testGoal + "<br>
+ *Pre-Requisites:* " + testPreconditions + "<br>
+ *Tested Binary:* " + testBinary + "<br>
+
+ | *Step* | *Verification* |
+ | Launch " + testBinary + " | App launches normally |
+ | Select an audible radio station | Verify that the station can be heard through the headset |
+ | Remove headset from device | Verify that warning sign is informing user of the need to re-insert the headset |
+ | Re-insert headset | Verify that the warning has now disappeard, and that the radio station can be heard once again |
+ | Close application | Verify that radio application closes properly |
+ "));
+ },
+
+ radio_interrupted_by_system_notification: function()
{
// Test meta data
testTitle = "Multimedia - Radio interrupted by System Notification";
@@ -94,7 +281,7 @@ A device specific headset is required to be connected to device for radio testin
testGroups = "BAT, 1.2";
// Test steps
- prompt(twiki("---+++ " + testApplication + "<br><br>
+ prompt(twiki("---+++ " + testTitle + "<br><br>
*Goal:* " + testGoal + "<br>
*Pre-Requisites:* " + testPreconditions + "<br>
*Tested Binary:* " + testBinary + "<br>
@@ -104,7 +291,8 @@ A device specific headset is required to be connected to device for radio testin
| Locate a strong radio station signal by scanning up/down | |
| While on a strong and audible radio signal, evoke a system notification on device (eg: incoming SMS, alarm notification) | Verify that the radio has muted, and after the system notification has been delivered, the radio reverts to outputting the audio signal back through the headphones |
| While on a strong and audible radio signal, call the device | Verify that the radio has been muted, and stays muted during the duration of the call, and resumes once the call has ended |
- "));
+ | Close application | Verify that radio application closes properly |
+ "));
},
radio_volume_control: function()
@@ -117,7 +305,7 @@ A device specific headset is required to be connected to device for radio testin
testGroups = "BAT, 1.2";
// Test steps
- prompt(twiki("---+++ " + testApplication + "<br><br>
+ prompt(twiki("---+++ " + testTitle + "<br><br>
*Goal:* " + testGoal + "<br>
*Pre-Requisites:* " + testPreconditions + "<br>
*Tested Binary:* " + testBinary + "<br>
@@ -132,7 +320,7 @@ A device specific headset is required to be connected to device for radio testin
"));
},
- display_radio_metadata: function()
+ display_radio_metadata: function()
{
// Test meta data
testTitle = "Multimedia - Display Radio Metadata";
@@ -142,7 +330,7 @@ A device specific headset is required to be connected to device for radio testin
testGroups = "BAT, 1.2";
// Test steps
- prompt(twiki("---+++ " + testApplication + "<br><br>
+ prompt(twiki("---+++ " + testTitle + "<br><br>
*Goal:* " + testGoal + "<br>
*Pre-Requisites:* " + testPreconditions + "<br>
*Tested Binary:* " + testBinary + "<br>