diff options
Diffstat (limited to 'examples/multimedia/spectrum/app/engine.h')
| -rw-r--r-- | examples/multimedia/spectrum/app/engine.h | 315 |
1 files changed, 315 insertions, 0 deletions
diff --git a/examples/multimedia/spectrum/app/engine.h b/examples/multimedia/spectrum/app/engine.h new file mode 100644 index 000000000..f3ca5c97a --- /dev/null +++ b/examples/multimedia/spectrum/app/engine.h @@ -0,0 +1,315 @@ +/**************************************************************************** +** +** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies). +** Contact: http://www.qt-project.org/legal +** +** This file is part of the examples of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:BSD$ +** You may use this file under the terms of the BSD license as follows: +** +** "Redistribution and use in source and binary forms, with or without +** modification, are permitted provided that the following conditions are +** met: +** * Redistributions of source code must retain the above copyright +** notice, this list of conditions and the following disclaimer. +** * Redistributions in binary form must reproduce the above copyright +** notice, this list of conditions and the following disclaimer in +** the documentation and/or other materials provided with the +** distribution. +** * Neither the name of Digia Plc and its Subsidiary(-ies) nor the names +** of its contributors may be used to endorse or promote products derived +** from this software without specific prior written permission. +** +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." +** +** $QT_END_LICENSE$ +** +****************************************************************************/ + +#ifndef ENGINE_H +#define ENGINE_H + +#include "spectrum.h" +#include "spectrumanalyser.h" +#include "wavfile.h" + +#include <QAudioDeviceInfo> +#include <QAudioFormat> +#include <QBuffer> +#include <QByteArray> +#include <QDir> +#include <QObject> +#include <QVector> + +#ifdef DUMP_CAPTURED_AUDIO +#define DUMP_DATA +#endif + +#ifdef DUMP_SPECTRUM +#define DUMP_DATA +#endif + +class FrequencySpectrum; +QT_BEGIN_NAMESPACE +class QAudioInput; +class QAudioOutput; +QT_END_NAMESPACE + +/** + * This class interfaces with the QtMultimedia audio classes, and also with + * the SpectrumAnalyser class. Its role is to manage the capture and playback + * of audio data, meanwhile performing real-time analysis of the audio level + * and frequency spectrum. + */ +class Engine : public QObject +{ + Q_OBJECT + +public: + explicit Engine(QObject *parent = 0); + ~Engine(); + + const QList<QAudioDeviceInfo> &availableAudioInputDevices() const + { return m_availableAudioInputDevices; } + + const QList<QAudioDeviceInfo> &availableAudioOutputDevices() const + { return m_availableAudioOutputDevices; } + + QAudio::Mode mode() const { return m_mode; } + QAudio::State state() const { return m_state; } + + /** + * \return Current audio format + * \note May be QAudioFormat() if engine is not initialized + */ + const QAudioFormat& format() const { return m_format; } + + /** + * Stop any ongoing recording or playback, and reset to ground state. + */ + void reset(); + + /** + * Load data from WAV file + */ + bool loadFile(const QString &fileName); + + /** + * Generate tone + */ + bool generateTone(const Tone &tone); + + /** + * Generate tone + */ + bool generateSweptTone(qreal amplitude); + + /** + * Initialize for recording + */ + bool initializeRecord(); + + /** + * Position of the audio input device. + * \return Position in bytes. + */ + qint64 recordPosition() const { return m_recordPosition; } + + /** + * RMS level of the most recently processed set of audio samples. + * \return Level in range (0.0, 1.0) + */ + qreal rmsLevel() const { return m_rmsLevel; } + + /** + * Peak level of the most recently processed set of audio samples. + * \return Level in range (0.0, 1.0) + */ + qreal peakLevel() const { return m_peakLevel; } + + /** + * Position of the audio output device. + * \return Position in bytes. + */ + qint64 playPosition() const { return m_playPosition; } + + /** + * Length of the internal engine buffer. + * \return Buffer length in bytes. + */ + qint64 bufferLength() const; + + /** + * Amount of data held in the buffer. + * \return Data length in bytes. + */ + qint64 dataLength() const { return m_dataLength; } + + /** + * Set window function applied to audio data before spectral analysis. + */ + void setWindowFunction(WindowFunction type); + +public slots: + void startRecording(); + void startPlayback(); + void suspend(); + void setAudioInputDevice(const QAudioDeviceInfo &device); + void setAudioOutputDevice(const QAudioDeviceInfo &device); + +signals: + void stateChanged(QAudio::Mode mode, QAudio::State state); + + /** + * Informational message for non-modal display + */ + void infoMessage(const QString &message, int durationMs); + + /** + * Error message for modal display + */ + void errorMessage(const QString &heading, const QString &detail); + + /** + * Format of audio data has changed + */ + void formatChanged(const QAudioFormat &format); + + /** + * Length of buffer has changed. + * \param duration Duration in microseconds + */ + void bufferLengthChanged(qint64 duration); + + /** + * Amount of data in buffer has changed. + * \param Length of data in bytes + */ + void dataLengthChanged(qint64 duration); + + /** + * Position of the audio input device has changed. + * \param position Position in bytes + */ + void recordPositionChanged(qint64 position); + + /** + * Position of the audio output device has changed. + * \param position Position in bytes + */ + void playPositionChanged(qint64 position); + + /** + * Level changed + * \param rmsLevel RMS level in range 0.0 - 1.0 + * \param peakLevel Peak level in range 0.0 - 1.0 + * \param numSamples Number of audio samples analyzed + */ + void levelChanged(qreal rmsLevel, qreal peakLevel, int numSamples); + + /** + * Spectrum has changed. + * \param position Position of start of window in bytes + * \param length Length of window in bytes + * \param spectrum Resulting frequency spectrum + */ + void spectrumChanged(qint64 position, qint64 length, const FrequencySpectrum &spectrum); + + /** + * Buffer containing audio data has changed. + * \param position Position of start of buffer in bytes + * \param buffer Buffer + */ + void bufferChanged(qint64 position, qint64 length, const QByteArray &buffer); + +private slots: + void audioNotify(); + void audioStateChanged(QAudio::State state); + void audioDataReady(); + void spectrumChanged(const FrequencySpectrum &spectrum); + +private: + void resetAudioDevices(); + bool initialize(); + bool selectFormat(); + void stopRecording(); + void stopPlayback(); + void setState(QAudio::State state); + void setState(QAudio::Mode mode, QAudio::State state); + void setFormat(const QAudioFormat &format); + void setRecordPosition(qint64 position, bool forceEmit = false); + void setPlayPosition(qint64 position, bool forceEmit = false); + void calculateLevel(qint64 position, qint64 length); + void calculateSpectrum(qint64 position); + void setLevel(qreal rmsLevel, qreal peakLevel, int numSamples); + +#ifdef DUMP_DATA + void createOutputDir(); + QString outputPath() const { return m_outputDir.path(); } +#endif + +#ifdef DUMP_CAPTURED_AUDIO + void dumpData(); +#endif + +private: + QAudio::Mode m_mode; + QAudio::State m_state; + + bool m_generateTone; + SweptTone m_tone; + + WavFile* m_file; + // We need a second file handle via which to read data into m_buffer + // for analysis + WavFile* m_analysisFile; + + QAudioFormat m_format; + + const QList<QAudioDeviceInfo> m_availableAudioInputDevices; + QAudioDeviceInfo m_audioInputDevice; + QAudioInput* m_audioInput; + QIODevice* m_audioInputIODevice; + qint64 m_recordPosition; + + const QList<QAudioDeviceInfo> m_availableAudioOutputDevices; + QAudioDeviceInfo m_audioOutputDevice; + QAudioOutput* m_audioOutput; + qint64 m_playPosition; + QBuffer m_audioOutputIODevice; + + QByteArray m_buffer; + qint64 m_bufferPosition; + qint64 m_bufferLength; + qint64 m_dataLength; + + int m_levelBufferLength; + qreal m_rmsLevel; + qreal m_peakLevel; + + int m_spectrumBufferLength; + QByteArray m_spectrumBuffer; + SpectrumAnalyser m_spectrumAnalyser; + qint64 m_spectrumPosition; + + int m_count; + +#ifdef DUMP_DATA + QDir m_outputDir; +#endif + +}; + +#endif // ENGINE_H |