diff options
Diffstat (limited to 'tests/systemtests/audio')
| -rw-r--r-- | tests/systemtests/audio/sys_audio.qtt | 387 |
1 files changed, 0 insertions, 387 deletions
diff --git a/tests/systemtests/audio/sys_audio.qtt b/tests/systemtests/audio/sys_audio.qtt deleted file mode 100644 index a9cdd5528..000000000 --- a/tests/systemtests/audio/sys_audio.qtt +++ /dev/null @@ -1,387 +0,0 @@ -/**************************************************************************** -** -** Copyright (C) 2012 Nokia Corporation and/or its subsidiary(-ies). -** Contact: http://www.qt-project.org/ -** -** This file is part of the Qt Mobility Components. -** -** $QT_BEGIN_LICENSE:LGPL$ -** GNU Lesser General Public License Usage -** This file may be used under the terms of the GNU Lesser General Public -** License version 2.1 as published by the Free Software Foundation and -** appearing in the file LICENSE.LGPL included in the packaging of this -** file. Please review the following information to ensure the GNU Lesser -** General Public License version 2.1 requirements will be met: -** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. -** -** In addition, as a special exception, Nokia gives you certain additional -** rights. These rights are described in the Nokia Qt LGPL Exception -** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. -** -** GNU General Public License Usage -** Alternatively, this file may be used under the terms of the GNU General -** Public License version 3.0 as published by the Free Software Foundation -** and appearing in the file LICENSE.GPL included in the packaging of this -** file. Please review the following information to ensure the GNU General -** Public License version 3.0 requirements will be met: -** http://www.gnu.org/copyleft/gpl.html. -** -** Other Usage -** Alternatively, this file may be used in accordance with the terms and -** conditions contained in a signed written agreement between you and Nokia. -** -** -** -** -** -** -** $QT_END_LICENSE$ -** -****************************************************************************/ - -//TESTED_COMPONENT=src/multimedia - -testcase = { - -/* Notes -Ensure various mp3, wav, ogg, oga, spx and flac audio files available for playback -Ensure a valid m3u file referring to locations where indicated media is available on the device -Ensure the device can ping destinations on the network (if applicable) -Have an audio stream url available (e.g. http://202.6.74.107:8060/triplej.mp3 for example) -Ensure access to Internet available to device either via 3G and WiFi -*/ - initTestCase: function() - { - }, - - play_an_audio_file_data: { - mp3:[".mp3", "filename", "mpeg audio layer 3"], - wav:[".wav", "filename", "waveform audio"], - ogg:[".ogg", "filename", "container format"], - vorbis:[".oga", "filename", "audio compression format"], - speex:[".spx", "filename", "speech audio format"], - flac:[".flac", "filename", "audio file format"] - }, - - play_an_audio_file: function(extension, filename, format) - { - // Test meta data - testTitle = "Multimedia - Play Audio File"; - testBinary = "player"; - testSource = "$QTDIR/qtmultimedia/examples/player"; - testGoal = "Verify that various Audio files can be played."; - testPreconditions = "Audio files in " + extension + " format are available on device. Launch the native Music player to populate the playlist before opening BGMPTest."; - testGroups = "BAT, 5.0"; - - // Test steps - prompt(twiki("---+++ " + testTitle + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Verify that the playlist has populated the application | | - | Select the desired "+filename+extension+" and press play | Verify that the " + format + " file is audible on device | - - ")); - }, - - basic_player_controls_for_audio_data: { - mp3:[".mp3", "filename", "mpeg audio layer 3"], - wav:[".wav", "filename", "waveform audio"], - ogg:[".ogg", "filename", "container format"], - vorbis:[".oga", "filename", "audio compression format"], - speex:[".spx", "filename", "speech audio format"], - flac:[".flac", "filename", "audio file format"] - }, - - basic_player_controls_for_audio: function(extension, filename, format) - { - // Test meta data - testTitle = "Multimedia - Audio Player Controls"; - testBinary = "player"; - testSource = "$QTDIR/qtmultimedia/examples/player"; - testGoal = "Verify basic API for controlling audio playback "; - testPreconditions = "a test "+extension+" file is available on device"; - testGroups = "BAT, 5.0"; - - // Test steps - prompt(twiki("---+++ " + testTitle + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Select the desired "+filename+extension+" in playlist and press [Play] | Verify that file plays properly from the start | - | | Verify that the correct track details are displayed in the playlist | - | Select [Pause] | Verify that file has paused | - | Select [Play] | Verify that file continues to play properly from where previously paused. | - | | Verify that the progress bar tracks the progression of the file playback | - | Select [Next] control | Verify that next file in playlist is playing from start | - | | Verify that the correct playlist title is highlighted and that the details are correct to reflect the selected audio track | - | Select [Stop] control | Verify that file has stopped playing | - | Select [Play] | Verify that file continues to play from start of file. | - | With file playing, verify that UI volume control slider can change volume up and down | | - | Select volume at 50% (or thereabout) | | - | Select [Mute] | Verify that sound is muted while file is playing | - | | Verify that [Mute] control is displaying the Muted icon | - | Select [Mute] control again | Verify that sound has reverted back to level selected prior to muting | - ")); - }, - - hardware_volume_controls_for_audio_data: { - mp3:[".mp3", "filename", "mpeg audio layer 3"], - wav:[".wav", "filename", "waveform audio"], - ogg:[".ogg", "filename", "container format"], - vorbis:[".oga", "filename", "audio compression format"], - speex:[".spx", "filename", "speech audio format"], - flac:[".flac", "filename", "audio file format"] - }, - - hardware_volume_controls_for_audio: function(extension, filename, format) - { - // Test meta data - testTitle = "Multimedia - Audio Player Controls"; - testBinary = "player"; - testSource = "$QTDIR/qtmultimedia/examples/player"; - testGoal = "Verify hardware volume control of audio playback "; - testPreconditions = "a test "+extension+" file is available on device"; - testGroups = "BAT, 5.0"; - - // Test steps - prompt(twiki("---+++ " + testTitle + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Select the desired "+filename+extension+" in playlist and press [Play] | Verify that file plays properly from the start | - | Press the hardware volume keys to increase the volume to the maximum | Verify that the device now plays at maximum volume | - | Using hardware volume keys, select volume at about 50% | Verify that the device is now playing at about 50% volume | - | Using hardware keys, take volume down to 0% | Verify that sound is muted while file is playing | - | Using hardware keys, increase volume | Verify that sound is once again playing from device | - ")); - }, - - - basic_playlist_controls_for_audio_data: { - mp3:[".mp3", "filename", "mpeg audio layer 3"], - wav:[".wav", "filename", "waveform audio"], - ogg:[".ogg", "filename", "container format"], - vorbis:[".oga", "filename", "audio compression format"], - speex:[".spx", "filename", "speech audio format"], - flac:[".flac", "filename", "audio file format"] - }, - - basic_playlist_controls_for_audio: function(extension, filename, format) - { - // Test meta data - testTitle = "Multimedia - Audio Player Controls"; - testBinary = "player"; - testSource = "$QTDIR/qtmultimedia/examples/player"; - testGoal = "Verify basic API for controlling playlist playback "; - testPreconditions = "a test "+extension+" file is available on device"; - testGroups = "BAT, 5.0"; - - // Test steps - prompt(twiki("---+++ " + testTitle + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Select 'Sequential' as the Play Mode | | - | Select the desired "+filename+extension+" in playlist and press [Play] | Verify that file plays properly from the start | - | | Verify that the correct track details are displayed in the playlist | - | Select [Next] | Verify that the next file in the playlist is highlighted | - | | Verify that the correct audio file is being played from the beginning of the track | - | | Verify that there are no audible artifacts or undue lag during this change of track | - | After some time (10-20 sec), select [Prev] icon | Verify that the previous file in the playlist is being played from start | - | Let file play till end | Verify player continues playing the next file in the playlist window | - | After some arbitrary time, Select [Stop] | | - | Select [Next File] control | Verify that next file in playlist is highlighted | - | | Verify that file is not automatically playing | - | Select [Prev] control | Verify that previous file in playlist is highlighted | - | Select file in playlist | Verify that file plays in player. | - | Select number of files greater than can be displayed without scrolling in to playlist | Verify that list can be scrolled through | - | Navigate to the last file in the playlist and select [Next] | Verify that no other track is played | - | Select 'Loop' as the Play Mode | | - | Select [Next] | Verify that the next song played is the first song in the playlist | - | While first song is playing select [Prev] | Verify that the last song in the playlist is now playing | - | Select [current Loop] from Play Mode | Verify that the same song now plays in a loop | - | | Verify that selecting [Prev] or [Next] has no effect on the tune played | - | Select [Current Only] in the Play Mode | Verify that only the selected song plays and stops at the end | - | Select [Shuffle] | Verify that the playlist is now shuffled in a random fashion | - | Select [Shuffle] again | Verify that the playlist is again shuffled in a random fashion | - | Select [Reset] | Verify that the playlist is now back to its original order | - ")); - - }, - - seek_controls_for_audio_data: { - mp3:[".mp3", "filename", "mpeg audio layer 3"], - wav:[".wav", "filename", "waveform audio"], - ogg:[".ogg", "filename", "container format"], - virbis:[".oga", "filename", "audio compression format"], - speex:[".spx", "filename", "speech audio format"], - flac:[".flac", "filename", "audio file format"] - }, - - seek_controls_for_audio: function(extension, filename, format) - { - // Test meta data - testTitle = "Multimedia - Audio Seek Controls"; - testBinary = "AudioPlayer"; - testSource = "$QTDIR/qtmultimedia/examples/player"; - testGoal = "Verify FastForward and Rewind functionality of the API"; - testPreconditions = "a test "+extension+" file is available on device"; - testGroups = "BAT, 5.0"; - - // Test steps - prompt(twiki("---+++ " + testTitle + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Select [Play] to play the file | | - | Click on the [Move Forward] control | Verify that file playback has moved forward 5 seconds | - | Select [Pause] | Verify that the file has paused the playback | - | Click on the [Move Forward] control | Verify that the file has moved 5 seconds forward, but is still paused | - | Select [Play] | Verify that file is now playing from new position | - | Click on the [Move Backwards] control | Verify that file playback has moved back 5 seconds | - | Select [Pause] | Verify that the file has paused the playback | - | Click on the [Move Backwards] control | Verify that the file has moved 5 seconds backwards, but is still paused | - | Select [Play] | Verify that file is now playing from new position | - ")); - }, - - - - basic_controls_for_streamed_audio_content: function() - { - -//*Note* For this test you need a playlist of streaming media urls. Suggest: http://202.6.74.107:8060/triplej.mp3 ; http://www.abc.net.au/streaming/triplej.asx ; rtsp://media1.abc.net.au/broadcast/triplej.rm ; mms://media3.abc.net.au/triplej ; depending on your platform and backend support. - - // Test meta data - testTitle = "Multimedia - Content Streaming"; - testBinary = "player"; - testSource = "$QTDIR/qtmultimedia/examples/player"; - testGoal = "Verify playback of streaming audio media"; - testPreconditions = ""; - testGroups = "BAT, 5.0"; - - // Test steps - prompt(twiki("---+++ " + testTitle + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | In player application, Select or Tap [Open] | | - | In [Open File] navigate and highlight test (streaming) playlist file | | - | Select or Tap on selected file to return to player UI | Verify selected file has populated playlist | - | Highlight file in playlist by selecting or clicking it | | - | Select [Play] | Verify that stream is playing on device | - | Select [Pause] | Verify that stream is paused on device | - | | Verify that the [Pause] button has changed to a [Play] button | - | Select [Play] again | Verify that stream is playing on device | - | Select [Stop] | | - | Open local mp3 file in to play list and select it to play | Verify that the mp3 plays while the stream name is still present in the playlist | - | Re-select the stream in the playlist | Verify that the stream starts playing again | - | Select [Next File] | Verify that the player started playing the next file in the playlist | - | Select [Previous File] | Verify that the original stream is playing again | - | During stream playback, have headphones connected to device | Verify that the sound is now playing through the headphones | - | Invoke a system notification on the device (such as an incoming SMS) | Verify that the device correctly transmits the audible system notification through the devices speakers and then returns to playing the stream through the headphones | - ")); - }, - - - play_sound_effects: function() - { - - // Test meta data - testTitle = "Multimedia - SoundEffects Playback"; - testBinary = "player"; - testSource = "$QTDIR/qtmultimedia/examples/player"; - testGoal = "Verify playback of sound effects."; - testPreconditions = ""; - testGroups = "BAT, 1.2"; - - // Test steps - prompt(twiki("---+++ " + testTitle + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | Verify app launches normally | - | play soundeffect | Verify that a sound effect is audible | - | Close application | Verify that the application closes without issues | - ")); - }, - - change_volume_of_sound_effects: function() - { - - // Test meta data - testTitle = "Multimedia - SoundEffects Playback"; - testBinary = "player"; - testSource = "$QTDIR/qtmultimedia/examples/player"; - testGoal = "Change volume of sound effects."; - testPreconditions = ""; - testGroups = "BAT, 1.2"; - - // Test steps - prompt(twiki("---+++ " + testTitle + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | Verify app launches normally | - | Set volume of device to maximum | Verify that sound effect now plays at maximum volume | - | Set volume of device to about 50% volume | Verify that the sound effect now plays at half volume | - | Set volume of device to minimum | Verify that there is now no audio from device when sound effect is played | - | Close application | Verify that the application closes without issues | - ")); - }, - - - play_sound_effects_over_compressed_audio: function() - { - - // Test meta data - testTitle = "Multimedia - SoundEffects Playback"; - testBinary = "player"; - testSource = "$QTDIR/qtmultimedia/examples/player"; - testGoal = "Verify playback of sound effects over audio track."; - testPreconditions = "player application to provide background playback"; - testGroups = "BAT, 1.2"; - - // Test steps - prompt(twiki("---+++ " + testTitle + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch player, start playback of playlist | Audio should be heard from the device | - | Swipe to background player | Audio should still be heard from player | - | Launch " + testBinary + " | Verify app launches normally | - | Touch red rectangle | Verify that a sound effect is audible together with the background track | - | Touch blue rectangle | Verify that a sound effect is audible together with the background track | - | Touch green rectangle | Verify that a sound effect is audible together with the background track | - | Touch yellow rectangle | Verify that a sound effect is audible together with the background track | - | Touch a combination of rectangles in quick succession | Verify that sound effects trigger on each touch and that the background track can still be heard | - | Close application | Verify that the application closes without issues | - | | Verify that player is still playing audio tracks | - ")); - } -} |