From 37627f76809d6146b55b78bb7af2cf2fd0bbf7b7 Mon Sep 17 00:00:00 2001 From: dakovaci Date: Tue, 3 Apr 2012 12:59:03 +1000 Subject: Edited the radio system teste Added some missing detail Change-Id: I127a427e670196c80654eb4aae6cf7da4598f4ca Reviewed-by: Daron Andrew Edie --- tests/systemtests/radio/sys_radio.qtt | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) (limited to 'tests') diff --git a/tests/systemtests/radio/sys_radio.qtt b/tests/systemtests/radio/sys_radio.qtt index a56082a66..947675ae1 100644 --- a/tests/systemtests/radio/sys_radio.qtt +++ b/tests/systemtests/radio/sys_radio.qtt @@ -110,7 +110,7 @@ A device specific headset is required to be connected to device for radio testin testTitle = "Multimedia - Manually tune radio station"; testBinary = "radio"; testSource ="qt5/qtmultimedia/examples/radio" - testGoal = "Verify that user can manualy change radio station."; + testGoal = "Verify that user can manually change radio station."; testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antenna to the device and must be connected."; testGroups = "BAT, 1.2"; @@ -127,10 +127,10 @@ A device specific headset is required to be connected to device for radio testin | Select the up icon to be presented to the visualization view | | | Select the Plus icon on the menu bar | Verify that you are presented with the frequency dial | | Note the current selected frequency | | - | Select the dot indicator on the frequency dial, and move finger to right | Verify that the frequency on the indicater is now rising and that the audio has gone off the previous station | - | Keep moving selector until a radio station is heard | Verify that the frequency of the selected station is higher than the originaly selected station | + | Select the dot indicator on the frequency dial, and move finger to right | Verify that the frequency on the indicator is now rising and that the audio has gone off the previous station | + | Keep moving selector until a radio station is heard | Verify that the frequency of the selected station is higher than the originally selected station | | | Verify that the station is playing properly | - | Select to save the selected radio station frequency | Verify that the station is saved in the radiostation playlist | + | Select to save the selected radio station frequency | Verify that the station is saved in the radio station playlist | | Exit the radio application | Verify that the radio application closes cleanly | ")); }, @@ -157,12 +157,12 @@ A device specific headset is required to be connected to device for radio testin | Select the up icon to be presented to the visualization view | | | Select the Plus icon on the menu bar | Verify that you are presented with the frequency dial | | Note the current selected frequency | | - | Select the Scan Up Frequency controll | Verify that application has located a new station and that the frequency displayed is of the new station | + | Select the Scan Up Frequency control | Verify that application has located a new station and that the frequency displayed is of the new station | | | Verify that the station is playing properly | - | Select to save the selected radio station frequency | Verify that the station is saved in the radiostation playlist | + | Select to save the selected radio station frequency | Verify that the station is saved in the radio station playlist | | Select the Scan Down Frequency control | Verify that application has located the original station and that the frequency displayed is of the original station | | | Verify that the station is playing properly | - | Select to save the selected radio station frequency | Verify that the station is saved in the radiostation playlist | + | Select to save the selected radio station frequency | Verify that the station is saved in the radio station playlist | | Exit the radio application | Verify that the radio application closes cleanly | ")); }, @@ -195,8 +195,8 @@ A device specific headset is required to be connected to device for radio testin // Test meta data testTitle = "Multimedia - Radio: Save station playlist"; testBinary = "radio"; - testSource ="qt5/qtmultimedia/examples/radio"" - testGoal = "Verify that radio can save station playist."; + testSource ="qt5/qtmultimedia/examples/radio" + testGoal = "Verify that radio can save station playlist."; testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antenna to the device and must be connected."; testGroups = "BAT, 1.2"; @@ -238,7 +238,7 @@ A device specific headset is required to be connected to device for radio testin | *Step* | *Verification* | | Launch " + testBinary + " | App launches normally | | Select an audible radio station | Verify that the station can be heard through the speakers | - | Select from station menu: Turn On loudspaeker | Verify that the audio can be heard through the device speakers | + | Select from station menu: Turn On loudspeaker | Verify that the audio can be heard through the device speakers | | Select from the station menu: Turn Off Loudspeakers | Verify that the audio has now reverted back to the headphones | | Close application | Verify that radio application closes properly | ")); @@ -265,7 +265,7 @@ A device specific headset is required to be connected to device for radio testin | Launch " + testBinary + " | App launches normally | | Select an audible radio station | Verify that the station can be heard through the headset | | Remove headset from device | Verify that warning sign is informing user of the need to re-insert the headset | - | Re-insert headset | Verify that the warning has now disappeard, and that the radio station can be heard once again | + | Re-insert headset | Verify that the warning has now disappeared, and that the radio station can be heard once again | | Close application | Verify that radio application closes properly | ")); }, @@ -277,7 +277,7 @@ A device specific headset is required to be connected to device for radio testin testBinary = "radio"; testSource ="$QTDIR/qtmultimediakit/examples/Radio" testGoal = "Verify that radio can recover audio playback from various system notifications."; - testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antena to the device and must be connected."; + testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antenna to the device and must be connected."; testGroups = "BAT, 1.2"; // Test steps @@ -316,16 +316,16 @@ A device specific headset is required to be connected to device for radio testin | While on a strong and audible radio signal, move volume slider to the right | Verify that the audio volume of the radio station is amplified | | Move volume slider to the left | Verify that the audio volume is lowered | | Move the volume slider all the way to the left | Verify that the sound is now completely muted | - | Return the volume to a value above 50% and click the Mute/unmute comend | Verify that the audio changes from being muted to unmuted and back | + | Return the volume to a value above 50% and click the Mute/unmute command | Verify that the audio changes from being muted to unmuted and back | ")); }, display_radio_metadata: function() { // Test meta data - testTitle = "Multimedia - Display Radio Metadata"; + testTitle = "Multimedia - Display Radio Meta data"; testBinary = "radio"; - testGoal = "Verify that the radio API can display properly formated meta data."; + testGoal = "Verify that the radio API can display properly formmated meta data."; testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antena to the device and must be connected."; testGroups = "BAT, 1.2"; @@ -339,11 +339,11 @@ A device specific headset is required to be connected to device for radio testin | Launch " + testBinary + " | App launches normally | | Locate a strong radio station signal by scanning up or down the frequency | Verify that the Frequency field is populated with the correct frequency for the given radio station | | | Verify that the Volume field is displaying the proper volume % | - | Click on the Mute/Unmute comand | Verify that Muted field changes from 'false' to 'true' and back | + | Click on the Mute/Unmute command | Verify that Muted field changes from 'false' to 'true' and back | | | If applicable, confirm that the Station Name field is properly displayed | | | If applicable, confirm that the Station Id field is properly displayed | | | If applicable, confirm that the Program Type field is properly displayed | - | | If applicable, confirm that the PRadio Text field is properly displayed | + | | If applicable, confirm that the Radio Text field is properly displayed | ")); }, } -- cgit v1.2.3