/****************************************************************************
**
** Copyright (C) 2012 Nokia Corporation and/or its subsidiary(-ies).
** All rights reserved.
** Contact: http://www.qt-project.org/
**
** This file is part of the Qt Mobility Components.
**
** $QT_BEGIN_LICENSE:LGPL$
** GNU Lesser General Public License Usage
** This file may be used under the terms of the GNU Lesser General Public
** License version 2.1 as published by the Free Software Foundation and
** appearing in the file LICENSE.LGPL included in the packaging of this
** file. Please review the following information to ensure the GNU Lesser
** General Public License version 2.1 requirements will be met:
** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain additional
** rights. These rights are described in the Nokia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU General
** Public License version 3.0 as published by the Free Software Foundation
** and appearing in the file LICENSE.GPL included in the packaging of this
** file. Please review the following information to ensure the GNU General
** Public License version 3.0 requirements will be met:
** http://www.gnu.org/copyleft/gpl.html.
**
** Other Usage
** Alternatively, this file may be used in accordance with the terms and
** conditions contained in a signed written agreement between you and Nokia.
**
**
**
**
**
** $QT_END_LICENSE$
**
****************************************************************************/
//TESTED_COMPONENT=src/multimedia
testcase = {
/* Notes
Ensure various mp3, wav, ogg, oga, spx and flac audio files availabe for playback
Ensure a valid m3u file referring to locations where indicated media is available on the device
Ensure the device can ping destinations on the network (if applicable)
Have an audio stream url available (e.g. http://202.6.74.107:8060/triplej.mp3 for example)
Ensure access to Internet available to device either via 3G and WiFi
SIM cards from Vodafone and Testra (Australia) needed for 3G streaming testing
*/
initTestCase: function()
{
},
play_an_audio_file_data: {
// mp3:[".mp3", "filename", "mpeg audio layer 3"],
// wav:[".wav", "filename", "waveform audio"],
ogg:[".ogg", "filename", "container format"],
// virbis:[".oga", "filename", "audio compression format"],
// speex:[".spx", "filename", "speech audio format"],
// flac:[".flac", "filename", "audio file format"]
},
play_an_audio_file: function(extension, filename, format)
{
// Test meta data
testApplication = "Multimedia - Play Audio File";
testBinary = "BGMPTest01";
testGoal = "Verify that various Audio files can be played.";
testPreconditions = "Audio files in " + extension + " format are available on device.";
testGroups = "BAT";
// Test steps
prompt(twiki("---+++ " + testApplication + "
*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* |
| Launch " + testBinary + " | App launches normally |
| Verify that the playlist has populated the application | |
| Select the desired "+filename+extension+" and press play | Verify that the " + format + " file is audible on device |
"));
},
basic_player_controls_for_audio_data: {
// mp3:[".mp3", "filename", "mpeg audio layer 3"],
// wav:[".wav", "filename", "waveform audio"],
ogg:[".ogg", "filename", "container format"],
// virbis:[".oga", "filename", "audio compression format"],
// speex:[".spx", "filename", "speech audio format"],
//flac:[".flac", "filename", "audio file format"]
},
basic_player_controls_for_audio: function(extension, filename, format)
{
// Test meta data
testApplication = "Multimedia - Audio Player Controls";
testBinary = "BGMPTest01";
testGoal = "Verify basic API for controling audio playback ";
testPreconditions = "a test "+extension+" file is available on device";
testGroups = "BAT";
// Test steps
prompt(twiki("---+++ " + testApplication + "
*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* |
| Launch " + testBinary + " | App launches normally |
| Select the desired "+filename+extension+" in playlist and press [Play] | Verify that file plays properly from the start |
| | Verify that the correct track details are displayed in the Playlist |
| Select [Pause] | Verify that file has paused |
| Select [Play] | Verify that file continues to play properly from where previously paused. |
| | Verify that the timebar tracks the progression of the file playback |
| Select [Next] control | Verify that next file in playlist is playing from start |
| | Verify that the correct playlist title is highlighted and that the details are correct to reflect the seclected audio track |
| Select [Stop] control | Verify that file has stopped playing |
| Select [Play] | Verify that file continues to play from start of file. |
| With file playing, verify that UI volume control slider can change volume up and down | |
| Select volume at 50% (or thereabout) | |
| Select [Mute] | Verify that sound is muted while file is playing |
| | Verify that [Mute] control is displaying the Muted icon |
| Select [Mute] control again | Verify that sound has reverted back to level selected prior to muting |
"));
},
basic_playlist_controls_for_audio_data: {
// mp3:[".mp3", "filename", "mpeg audio layer 3"],
// wav:[".wav", "filename", "waveform audio"],
ogg:[".ogg", "filename", "container format"],
// virbis:[".oga", "filename", "audio compression format"],
// speex:[".spx", "filename", "speech audio format"],
//flac:[".flac", "filename", "audio file format"]
},
basic_playlist_controls_for_audio: function(extension, filename, format)
{
// Test meta data
testApplication = "Multimedia - Audio Player Controls";
testBinary = "BGMPTest01";
testGoal = "Verify basic API for controling playlist playback ";
testPreconditions = "a test "+extension+" file is available on device";
testGroups = "BAT";
// Test steps
prompt(twiki("---+++ " + testApplication + "
*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* |
| Launch " + testBinary + " | App launches normally |
| Select 'Sequential' as the Play Mode | |
| Select the desired "+filename+extension+" in playlist and press [Play] | Verify that file plays properly from the start |
| | Verify that the correct track details are displayed in the Playlist |
| Select [Next] | Verify that the next file in the playlist is highlighted |
| | Verify that the correct audio file is being played from the begining of the track |
| | Verify that there are no audable artifacts or undue lag during this change of track |
| After some time (10-20 sec), select [Prev] icon | Verify that the previous file in the playlist is being played from start |
| Let file play till end | Verify player continues playing the next file in the playlist window |
| After some arbitrary time, Select [Stop] | |
| Select [Next File] control | Verify that next file in playlist is highlighted |
| | Verify that file is not automatically playing |
| Select [Prev] control | Verify that previous file in playlist is highlighted |
| Select file in playlist | Verify that file plays in player. |
| Select number of files greater than can be displayed without scrolling in to playlist | Verify that list can be scrolled through |
| Navigate to the last file in the playlist and select [Next] | Verify that no other track is played |
| Select 'Loop' as the Play Mode | |
| Select [Next] | Verify that the next song played is the first song in the playlist |
| While first song is playing select [Prev] | Verify that the last song in the playlist is now playing |
| Select [current Loop] from Play Mode | Verify that the same song now plays in a loop |
| | Verify that selecting [Prev] or [Next] has no effect on the tune played |
| Select [Current Only] in the Play Mode | Verify that only the selected song plays and stops at the end |
| Select [Shuffle] | Verify that the playlist is now shuffled in a random fashon |
| Select [Shuffle] again | Verify that the playlist is again shuffled in a random fashon |
| Select [Reset] | Verify that the playlist is now back to its original order |
"));
},
seek_controls_for_audio_data: {
//mp3:[".mp3", "filename", "mpeg audio layer 3"],
//wav:[".wav", "filename", "waveform audio"],
ogg:[".ogg", "filename", "container format"],
//virbis:[".oga", "filename", "audio compression format"],
//speex:[".spx", "filename", "speech audio format"],
//flac:[".flac", "filename", "audio file format"]
},
seek_controls_for_audio: function(extension, filename, format)
{
// Test meta data
testApplication = "Multimedia - Audio Seek Controls";
testBinary = "AudioPlayer";
testGoal = "Verify FastForward and Rewind functionality of the API";
testPreconditions = "a test "+extension+" file is available on device";
testGroups = "BAT";
// Test steps
prompt(twiki("---+++ " + testApplication + "
*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* |
| Launch " + testBinary + " | App launches normally |
| Select [Play] to play the file | |
| Click on the [Move Forward] controll | Verify that file playback has moved forward 5 seconds |
| Select [Pause] | Verify that the file has paused the playback |
| Click on the [Move Forward] controll | Verify that the file has moved 5 seconds forward, but is still paused |
| Select [Play] | Verify that file is now playing from new position |
| Click on the [Move Backwards] controll | Verify that file playback has moved back 5 seconds |
| Select [Pause] | Verify that the file has paused the playback |
| Click on the [Move Backwards] controll | Verify that the file has moved 5 seconds backwards, but is still paused |
| Select [Play] | Verify that file is now playing from new position |
"));
},
basic_controls_for_streamed_audio_content: function()
{
//*Note* For this test you need a playlist of streaming media urls. Suggest: http://202.6.74.107:8060/triplej.mp3 ; http://www.abc.net.au/streaming/triplej.asx ; rtsp://media1.abc.net.au/broadcast/triplej.rm ; mms://media3.abc.net.au/triplej ; depending on your platform and backend support.
// Test meta data
testApplication = "Multimedia - Content Streaming";
testBinary = "player";
testGoal = "Verify playback of streaming audio media";
testPreconditions = "";
testGroups = "BAT";
// Test steps
prompt(twiki("---+++ " + testApplication + "
*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* |
| Launch " + testBinary + " | App launches normally |
| In player application, Select or Tap [Open] | |
| In [Open File] navigate and highlight test (streaming) playlist file | |
| Select or Tap on selected file to return to player UI | Verify selected file has populated playlist |
| Highlight file in playlist by selecting or clicking it | |
| Select [Play] | Verify that stream is playing on device |
| Select [Pause] | Verify that stream is paused on device |
| | Verify that the [Pause] button has changed to a [Play] button |
| Select [Play] again | Verify that stream is playing on device |
| Select [Stop] | |
| Open local mp3 file in to play list and select it to play | Verify that the mp3 plays while the stream name is still present in the playlist |
| Re-select the stream in the playlist | Verify that the stream starts playing again |
| Select [Next File] | Verify that the player started playing the next file in the playlist |
| Select [Previous File] | Verify that the original stream is playing again |
| During stream playback, have headphones connected to device | Verify that the sound is now playing through the headphones |
| Invoke a system notification on the device (such as an incoming SMS) | Verify that the device correctly transmits the audible system notification through the devices speakers and then returns to playing the stream through the headphones |
"));
},
record_an_audio_file: function()
{
// Test meta data
testApplication = "Multimedia - Recording Audio";
testBinary = "audiorecorder";
testGoal = "Verify that audio can be recorded.";
testPreconditions = "";
testGroups = "BAT";
// Test steps
prompt(twiki("---+++ " + testApplication + "
*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* |
| Launch " + testBinary + " | App launches normally |
| Select Input Device | |
| Select Audio Codec | |
| Select File Container | |
| Select Sample Rate | |
| Select Quality and Bitrate | |
| Select Output... and select location and name of output file | |
| Select Record | Verify that [Record] button has changed in to [Stop] |
| | Verify that Duration is counting seconds |
| | Verify that Recording is displayed |
| Select Stop | Verify that Duration is now 0 |
| Select Output File in file browser | Verify that an audio file has been generated |
| Play output file in media player | Verify that audible audio is recorded in file |
"));
},
pause_recording_an_audio_file: function()
{
// Test meta data
testApplication = "Multimedia - Pause Recording Audio";
testBinary = "audiorecorder";
testGoal = "Verify API to be able to pause audio recording without unwanted artifacts.";
testPreconditions = "";
testGroups = "BAT";
// Test steps
prompt(twiki("---+++ " + testApplication + "
*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* |
| Launch " + testBinary + " | App launches normally |
| Select Input Device | |
| Select Audio Codec | |
| Select File Container | |
| Select Sample Rate | |
| Select Quality and Bitrate | |
| Select Output... and select location and name of output file | |
| Select Record | Verify that [Record] button has changed in to [Stop] |
| | Verify that Duration is counting seconds |
| | Verify that Recording is displayed |
| Speak in to the microphone. Suggest counting from 1 to 5 | |
| Select Pause | Verify that instead of Duration, Paused is displayed |
| Keep speaking in to microfon, continue counting from 6 to 10 | |
| Select Resume | Verify that the counter has resumed the seconds count from where it was previously paused. |
| Continue counting from 11 to 15 in to the microphone | |
| After a arbitrary time, Stop the recording. | |
| Select Output File in file browser | Verify that an audio file has been generated |
| Play output file in media player | Verify that audible audio is recorded in file and that audio is only recorded for period that Pause was not selected |
| | Verify that the recording reproduces the counting from 1 to 5 then continues from 11 to 15 and that the counting from 6 - 10 is not recorded |
| | Verify there is no audible artifact that separates the two or more recording periods, that is that the joint is seamless |
"));
},
play_sound_efects: function()
{
// Test meta data
testApplication = "Multimedia - SoundEffects Playback";
testBinary = "BeatBox";
testGoal = "Verify playback of sound effects.";
testPreconditions = "";
testGroups = "BAT, 1.2";
// Test steps
prompt(twiki("---+++ " + testApplication + "
*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* |
| Launch " + testBinary + " | Verify app launches normally |
| Touch red rectangle | Verify that a soundeffect is audible |
| Touch blue rectangle | Verify that a soundeffect is audible |
| Touch green rectangle | Verify that a soundeffect is audible |
| Tuch yellow rectangle | Verify that a soundeffect is audible |
| Touch a combination of rectangles in quick succession | Verify that sound effects trigger on each touch |
| Close application | Verify that the application closes without issues |
"));
},
play_sound_efects_over_compressed_audio: function()
{
// Test meta data
testApplication = "Multimedia - SoundEffects Playback";
testBinary = "BeatBox";
testGoal = "Verify playback of sound effects over audio track.";
testPreconditions = "BGMPTest01 application to provide backround playback";
testGroups = "BAT, 1.2";
// Test steps
prompt(twiki("---+++ " + testApplication + "
*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* |
| Launch BGMPTest01, start playback of playlist | Audio sould be heard from the device |
| Swipe to backround BGMPTest01 | Audio should still be heard from BGMPTest01 |
| Launch " + testBinary + " | Verify app launches normally |
| Touch red rectangle | Verify that a soundeffect is audible toghether with the background track |
| Touch blue rectangle | Verify that a soundeffect is audible toghether with the background track |
| Touch green rectangle | Verify that a soundeffect is audible toghether with the background track |
| Tuch yellow rectangle | Verify that a soundeffect is audible toghether with the background track |
| Touch a combination of rectangles in quick succession | Verify that sound effects trigger on each touch and that the background track can still be heard |
| Close application | Verify that the application closes without issues |
| | Verify that BGMPTest01 is still playing audio tracks |
"));
}
}