/****************************************************************************
**
** Copyright (C) 2012 Nokia Corporation and/or its subsidiary(-ies).
** Contact: http://www.qt-project.org/
**
** This file is part of the Qt Mobility Components.
**
** $QT_BEGIN_LICENSE:LGPL$
** GNU Lesser General Public License Usage
** This file may be used under the terms of the GNU Lesser General Public
** License version 2.1 as published by the Free Software Foundation and
** appearing in the file LICENSE.LGPL included in the packaging of this
** file. Please review the following information to ensure the GNU Lesser
** General Public License version 2.1 requirements will be met:
** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain additional
** rights. These rights are described in the Nokia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU General
** Public License version 3.0 as published by the Free Software Foundation
** and appearing in the file LICENSE.GPL included in the packaging of this
** file. Please review the following information to ensure the GNU General
** Public License version 3.0 requirements will be met:
** http://www.gnu.org/copyleft/gpl.html.
**
** Other Usage
** Alternatively, this file may be used in accordance with the terms and
** conditions contained in a signed written agreement between you and Nokia.
**
**
**
**
**
**
** $QT_END_LICENSE$
**
****************************************************************************/
//TESTED_COMPONENT=src/multimedia
testcase = {
/* Notes
Ensure radio reception is available in testing area
A device specific headset is required to be connected to device for radio testing
*/
initTestCase: function()
{
},
play_a_radio_transmission: function()
{
// Test meta data
testTitle = "Multimedia - Play Radio Transmission";
testBinary = "radio";
testSource ="qt5/qtmultimedia/examples/radio"
testGoal = "Verify that radio stations can be played.";
testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antena to the device and must be connected.";
testGroups = "BAT, 1.2";
// Test steps
prompt(twiki("---+++ " + testTitle + "
*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* |
| Launch " + testBinary + " | App launches normally |
| | If not first time running application on image, verify that you are presented with a list of previously scanned radio stations |
| Select a radio station from the list | Verify that the station is properly selected |
| Select the power icon next to the station name | Verify that audio from the radio station is now heard through the headphones |
| Deselect the power icon next to the station name | Verify that audio from the radio station is no longer heard through the headphones |
| Exit the radio application | Verify that the radio application closes cleanly |
"));
},
change_a_radio_station: function()
{
// Test meta data
testTitle = "Multimedia - Radio: Change radio station";
testBinary = "radio";
testSource ="qt5/qtmultimedia/examples/radio"
testGoal = "Verify that radio station can be changed from station playlist.";
testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antenna to the device and must be connected.";
testGroups = "BAT, 1.2";
// Test steps
prompt(twiki("---+++ " + testTitle + "
*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* |
| Launch " + testBinary + " | App launches normally |
| Select a radio station from the list | Verify that the station is heard through the headphones |
| If in the visualization view, select the down icon to return to the station selection view | Verify that you are presented with the list of stations |
| Select a different station | Verify that you are now listening to a different radio station |
| Deselect the power icon next to the station name | Verify that audio from the radio station is no longer heard through the headphones |
| Exit the radio application | Verify that the radio application closes cleanly |
"));
},
manually_tune_radio_station: function()
{
// Test meta data
testTitle = "Multimedia - Manually tune radio station";
testBinary = "radio";
testSource ="qt5/qtmultimedia/examples/radio"
testGoal = "Verify that user can manualy change radio station.";
testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antenna to the device and must be connected.";
testGroups = "BAT, 1.2";
// Test steps
prompt(twiki("---+++ " + testTitle + "
*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* |
| Launch " + testBinary + " | App launches normally |
| Select a radio station from the list | Verify that the station is heard through the headphones |
| Select the up icon to be presented to the visualization view | |
| Select the Plus icon on the menu bar | Verify that you are presented with the frequency dial |
| Note the current selected frequency | |
| Select the dot indicator on the frequency dial, and move finger to right | Verify that the frequency on the indicater is now rising and that the audio has gone off the previous station |
| Keep moving selector until a radio station is heard | Verify that the frequency of the selected station is higher than the originaly selected station |
| | Verify that the station is playing properly |
| Select to save the selected radio station frequency | Verify that the station is saved in the radiostation playlist |
| Exit the radio application | Verify that the radio application closes cleanly |
"));
},
scan_up_and_down: function()
{
// Test meta data
testTitle = "Multimedia - Scan up and down the frequency";
testBinary = "radio";
testSource ="qt5/qtmultimedia/examples/radio"
testGoal = "Verify that radio can scan up and down the FM frequency.";
testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antenna to the device and must be connected.";
testGroups = "BAT, 1.2";
// Test steps
prompt(twiki("---+++ " + testTitle + "
*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* |
| Launch " + testBinary + " | App launches normally |
| Select a radio station from the list | Verify that the station is heard through the headphones |
| Select the up icon to be presented to the visualization view | |
| Select the Plus icon on the menu bar | Verify that you are presented with the frequency dial |
| Note the current selected frequency | |
| Select the Scan Up Frequency controll | Verify that application has located a new station and that the frequency displayed is of the new station |
| | Verify that the station is playing properly |
| Select to save the selected radio station frequency | Verify that the station is saved in the radiostation playlist |
| Select the Scan Down Frequency control | Verify that application has located the original station and that the frequency displayed is of the original station |
| | Verify that the station is playing properly |
| Select to save the selected radio station frequency | Verify that the station is saved in the radiostation playlist |
| Exit the radio application | Verify that the radio application closes cleanly |
"));
},
scan_for_multiple_radio_stations: function()
{
// Test meta data
testTitle = "Multimedia - Radio: Scan for multiple radio station";
testBinary = "radio";
testSource ="qt5/qtmultimedia/examples/radio"
testGoal = "Verify that radio can scan for multiple stations at once.";
testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antenna to the device and must be connected.";
testGroups = "BAT, 1.2";
// Test steps
prompt(twiki("---+++ " + testTitle + "
*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* |
| Launch " + testBinary + " | App launches normally |
| On the menu, select Find new station | In the Radio Dialog Scanning view, observe the number of stations found |
| Exit the radio application | Verify that the radio application closes cleanly |
"));
},
save_radio_station_list: function()
{
// Test meta data
testTitle = "Multimedia - Radio: Save station playlist";
testBinary = "radio";
testSource ="qt5/qtmultimedia/examples/radio""
testGoal = "Verify that radio can save station playist.";
testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antenna to the device and must be connected.";
testGroups = "BAT, 1.2";
// Test steps
prompt(twiki("---+++ " + testTitle + "
*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* |
| Launch " + testBinary + " | App launches normally |
| Select to scan for multiple stations | Verify that multiple stations have been found |
| Select to save station playlist | |
| Close application | Verify that the application closes |
| Reopen " + testBinary + " | Verify that the app launches normally |
| Go to station playlist | Verify that the stations from the previous search are listed |
| Select various stations from playlist | Verify that radio station play properly |
| Close application | Verify that radio application closes properly |
"));
},
switch_audio_to_speakers: function()
{
// Test meta data
testTitle = "Multimedia - Radio: Switch audio to speakers";
testBinary = "radio";
testSource ="qt5/qtmultimedia/examples/radio"
testGoal = "Verify that radio can be output to external speakers.";
testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antenna to the device and must be connected.";
testGroups = "BAT, 1.2";
// Test steps
prompt(twiki("---+++ " + testTitle + "
*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* |
| Launch " + testBinary + " | App launches normally |
| Select an audible radio station | Verify that the station can be heard through the speakers |
| Select from station menu: Turn On loudspaeker | Verify that the audio can be heard through the device speakers |
| Select from the station menu: Turn Off Loudspeakers | Verify that the audio has now reverted back to the headphones |
| Close application | Verify that radio application closes properly |
"));
},
handle_headset_removal: function()
{
// Test meta data
testTitle = "Multimedia - Radio: Handle headset removal";
testBinary = "radio";
testSource ="qt5/qtmultimedia/examples/radio"
testGoal = "Verify that radio can handle removal and insertion of headset.";
testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antenna to the device and must be connected.";
testGroups = "BAT, 1.2";
// Test steps
prompt(twiki("---+++ " + testTitle + "
*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* |
| Launch " + testBinary + " | App launches normally |
| Select an audible radio station | Verify that the station can be heard through the headset |
| Remove headset from device | Verify that warning sign is informing user of the need to re-insert the headset |
| Re-insert headset | Verify that the warning has now disappeard, and that the radio station can be heard once again |
| Close application | Verify that radio application closes properly |
"));
},
radio_interrupted_by_system_notification: function()
{
// Test meta data
testTitle = "Multimedia - Radio interrupted by System Notification";
testBinary = "radio";
testSource ="$QTDIR/qtmultimediakit/examples/Radio"
testGoal = "Verify that radio can recover audio playback from various system notifications.";
testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antena to the device and must be connected.";
testGroups = "BAT, 1.2";
// Test steps
prompt(twiki("---+++ " + testTitle + "
*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* |
| Launch " + testBinary + " | App launches normally |
| Locate a strong radio station signal by scanning up/down | |
| While on a strong and audible radio signal, evoke a system notification on device (eg: incoming SMS, alarm notification) | Verify that the radio has muted, and after the system notification has been delivered, the radio reverts to outputting the audio signal back through the headphones |
| While on a strong and audible radio signal, call the device | Verify that the radio has been muted, and stays muted during the duration of the call, and resumes once the call has ended |
| Close application | Verify that radio application closes properly |
"));
},
radio_volume_control: function()
{
// Test meta data
testTitle = "Multimedia - Radio Volume Control";
testBinary = "radio";
testGoal = "Verify that the radio volume can be controlled via volume controls.";
testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antena to the device and must be connected.";
testGroups = "BAT, 1.2";
// Test steps
prompt(twiki("---+++ " + testTitle + "
*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* |
| Launch " + testBinary + " | App launches normally |
| Locate a strong radio station signal by scanning up or down the frequency | |
| While on a strong and audible radio signal, move volume slider to the right | Verify that the audio volume of the radio station is amplified |
| Move volume slider to the left | Verify that the audio volume is lowered |
| Move the volume slider all the way to the left | Verify that the sound is now completely muted |
| Return the volume to a value above 50% and click the Mute/unmute comend | Verify that the audio changes from being muted to unmuted and back |
"));
},
display_radio_metadata: function()
{
// Test meta data
testTitle = "Multimedia - Display Radio Metadata";
testBinary = "radio";
testGoal = "Verify that the radio API can display properly formated meta data.";
testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antena to the device and must be connected.";
testGroups = "BAT, 1.2";
// Test steps
prompt(twiki("---+++ " + testTitle + "
*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* |
| Launch " + testBinary + " | App launches normally |
| Locate a strong radio station signal by scanning up or down the frequency | Verify that the Frequency field is populated with the correct frequency for the given radio station |
| | Verify that the Volume field is displaying the proper volume % |
| Click on the Mute/Unmute comand | Verify that Muted field changes from 'false' to 'true' and back |
| | If applicable, confirm that the Station Name field is properly displayed |
| | If applicable, confirm that the Station Id field is properly displayed |
| | If applicable, confirm that the Program Type field is properly displayed |
| | If applicable, confirm that the PRadio Text field is properly displayed |
"));
},
}