/**************************************************************************** ** ** Copyright (C) 2016 The Qt Company Ltd and/or its subsidiary(-ies). ** Contact: https://www.qt.io/licensing/ ** ** This file is part of the Qt Mobility Components. ** ** $QT_BEGIN_LICENSE:GPL-EXCEPT$ ** Commercial License Usage ** Licensees holding valid commercial Qt licenses may use this file in ** accordance with the commercial license agreement provided with the ** Software or, alternatively, in accordance with the terms contained in ** a written agreement between you and The Qt Company. For licensing terms ** and conditions see https://www.qt.io/terms-conditions. For further ** information use the contact form at https://www.qt.io/contact-us. ** ** GNU General Public License Usage ** Alternatively, this file may be used under the terms of the GNU ** General Public License version 3 as published by the Free Software ** Foundation with exceptions as appearing in the file LICENSE.GPL3-EXCEPT ** included in the packaging of this file. Please review the following ** information to ensure the GNU General Public License requirements will ** be met: https://www.gnu.org/licenses/gpl-3.0.html. ** ** $QT_END_LICENSE$ ** ****************************************************************************/ //TESTED_COMPONENT=src/multimedia testcase = { /* Notes Ensure radio reception is available in testing area Most tier 1 platforms require a radio module A device specific headset is required to be connected to device for radio testing */ initTestCase: function() { }, play_a_radio_transmission: function() { // Test meta data testTitle = "Multimedia - Play Radio Transmission"; testBinary = "radio"; testSource ="qt5/qtmultimedia/examples/radio" testGoal = "Verify that radio stations can be played."; testPreconditions = "1. Radio reception should be available in the test area.
2. Device must have a suppported radio module."; testGroups = "BAT, 1.2"; // Test steps prompt(twiki("---+++ " + testTitle + "

*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* | | Launch " + testBinary + " | App launches normally | | | If not first time running application on image, verify that you are presented with a list of previously scanned radio stations | | Select a radio station from the list | Verify that the station is properly selected | | Select the power icon next to the station name | Verify that audio from the radio station is now heard through the headphones | | Deselect the power icon next to the station name | Verify that audio from the radio station is no longer heard through the headphones | | Exit the radio application | Verify that the radio application closes cleanly | ")); }, change_a_radio_station: function() { // Test meta data testTitle = "Multimedia - Radio: Change radio station"; testBinary = "radio"; testSource ="qt5/qtmultimedia/examples/radio" testGoal = "Verify that radio station can be changed from station playlist."; testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antenna to the device and must be connected."; testGroups = "BAT, 1.2"; // Test steps prompt(twiki("---+++ " + testTitle + "

*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* | | Launch " + testBinary + " | App launches normally | | Select a radio station from the list | Verify that the station is heard through the headphones | | If in the visualization view, select the down icon to return to the station selection view | Verify that you are presented with the list of stations | | Select a different station | Verify that you are now listening to a different radio station | | Deselect the power icon next to the station name | Verify that audio from the radio station is no longer heard through the headphones | | Exit the radio application | Verify that the radio application closes cleanly | ")); }, manually_tune_radio_station: function() { // Test meta data testTitle = "Multimedia - Manually tune radio station"; testBinary = "radio"; testSource ="qt5/qtmultimedia/examples/radio" testGoal = "Verify that user can manually change radio station."; testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antenna to the device and must be connected."; testGroups = "BAT, 1.2"; // Test steps prompt(twiki("---+++ " + testTitle + "

*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* | | Launch " + testBinary + " | App launches normally | | Select a radio station from the list | Verify that the station is heard through the headphones | | Select the up icon to be presented to the visualization view | | | Select the Plus icon on the menu bar | Verify that you are presented with the frequency dial | | Note the current selected frequency | | | Select the dot indicator on the frequency dial, and move finger to right | Verify that the frequency on the indicator is now rising and that the audio has gone off the previous station | | Keep moving selector until a radio station is heard | Verify that the frequency of the selected station is higher than the originally selected station | | | Verify that the station is playing properly | | Select to save the selected radio station frequency | Verify that the station is saved in the radio station playlist | | Exit the radio application | Verify that the radio application closes cleanly | ")); }, scan_up_and_down: function() { // Test meta data testTitle = "Multimedia - Scan up and down the frequency"; testBinary = "radio"; testSource ="qt5/qtmultimedia/examples/radio" testGoal = "Verify that radio can scan up and down the FM frequency."; testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antenna to the device and must be connected."; testGroups = "BAT, 1.2"; // Test steps prompt(twiki("---+++ " + testTitle + "

*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* | | Launch " + testBinary + " | App launches normally | | Select a radio station from the list | Verify that the station is heard through the headphones | | Select the up icon to be presented to the visualization view | | | Select the Plus icon on the menu bar | Verify that you are presented with the frequency dial | | Note the current selected frequency | | | Select the Scan Up Frequency control | Verify that application has located a new station and that the frequency displayed is of the new station | | | Verify that the station is playing properly | | Select to save the selected radio station frequency | Verify that the station is saved in the radio station playlist | | Select the Scan Down Frequency control | Verify that application has located the original station and that the frequency displayed is of the original station | | | Verify that the station is playing properly | | Select to save the selected radio station frequency | Verify that the station is saved in the radio station playlist | | Exit the radio application | Verify that the radio application closes cleanly | ")); }, scan_for_multiple_radio_stations: function() { // Test meta data testTitle = "Multimedia - Radio: Scan for multiple radio station"; testBinary = "radio"; testSource ="qt5/qtmultimedia/examples/radio" testGoal = "Verify that radio can scan for multiple stations at once."; testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antenna to the device and must be connected."; testGroups = "BAT, 1.2"; // Test steps prompt(twiki("---+++ " + testTitle + "

*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* | | Launch " + testBinary + " | App launches normally | | On the menu, select Find new station | In the Radio Dialog Scanning view, observe the number of stations found | | Exit the radio application | Verify that the radio application closes cleanly | ")); }, save_radio_station_list: function() { // Test meta data testTitle = "Multimedia - Radio: Save station playlist"; testBinary = "radio"; testSource ="qt5/qtmultimedia/examples/radio" testGoal = "Verify that radio can save station playlist."; testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antenna to the device and must be connected."; testGroups = "BAT, 1.2"; // Test steps prompt(twiki("---+++ " + testTitle + "

*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* | | Launch " + testBinary + " | App launches normally | | Select to scan for multiple stations | Verify that multiple stations have been found | | Select to save station playlist | | | Close application | Verify that the application closes | | Reopen " + testBinary + " | Verify that the app launches normally | | Go to station playlist | Verify that the stations from the previous search are listed | | Select various stations from playlist | Verify that radio station play properly | | Close application | Verify that radio application closes properly | ")); }, radio_interrupted_by_system_notification: function() { // Test meta data testTitle = "Multimedia - Radio interrupted by System Notification"; testBinary = "radio"; testSource ="$QTDIR/qtmultimediakit/examples/Radio" testGoal = "Verify that radio can recover audio playback from various system notifications."; testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antenna to the device and must be connected."; testGroups = "BAT, 1.2"; // Test steps prompt(twiki("---+++ " + testTitle + "

*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* | | Launch " + testBinary + " | App launches normally | | Locate a strong radio station signal by scanning up/down | | | While on a strong and audible radio signal, evoke a system notification on device (eg: alarm notification) | Verify that the radio has muted, and after the system notification has been delivered, the radio reverts to outputting the audio signal back through the headphones | | While on a strong and audible radio signal, call the device | Verify that the radio has been muted, and stays muted during the duration of the call, and resumes once the call has ended | | Close application | Verify that radio application closes properly | ")); }, radio_volume_control: function() { // Test meta data testTitle = "Multimedia - Radio Volume Control"; testBinary = "radio"; testGoal = "Verify that the radio volume can be controlled via volume controls."; testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antenna to the device and must be connected."; testGroups = "BAT, 1.2"; // Test steps prompt(twiki("---+++ " + testTitle + "

*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* | | Launch " + testBinary + " | App launches normally | | Locate a strong radio station signal by scanning up or down the frequency | | | While on a strong and audible radio signal, move volume slider to the right | Verify that the audio volume of the radio station is amplified | | Move volume slider to the left | Verify that the audio volume is lowered | | Move the volume slider all the way to the left | Verify that the sound is now completely muted | | Return the volume to a value above 50% and click the Mute/unmute command | Verify that the audio changes from being muted to unmuted and back | ")); }, display_radio_metadata: function() { // Test meta data testTitle = "Multimedia - Display Radio Meta data"; testBinary = "radio"; testGoal = "Verify that the radio API can display properly formatted meta data."; testPreconditions = "1. Radio reception should be available in the test area.
2. Wired headphones act as an antenna to the device and must be connected."; testGroups = "BAT, 1.2"; // Test steps prompt(twiki("---+++ " + testTitle + "

*Goal:* " + testGoal + "
*Pre-Requisites:* " + testPreconditions + "
*Tested Binary:* " + testBinary + "
| *Step* | *Verification* | | Launch " + testBinary + " | App launches normally | | Locate a strong radio station signal by scanning up or down the frequency | Verify that the Frequency field is populated with the correct frequency for the given radio station | | | Verify that the Volume field is displaying the proper volume % | | Click on the Mute/Unmute command | Verify that Muted field changes from 'false' to 'true' and back | | | If applicable, confirm that the Station Name field is properly displayed | | | If applicable, confirm that the Station Id field is properly displayed | | | If applicable, confirm that the Program Type field is properly displayed | | | If applicable, confirm that the Radio Text field is properly displayed | ")); }, }