/****************************************************************************
**
** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
** All rights reserved.
** Contact: Nokia Corporation (qt-info@nokia.com)
**
** This file is part of the Qt Mobility Components.
**
** $QT_BEGIN_LICENSE:LGPL$
** GNU Lesser General Public License Usage
** This file may be used under the terms of the GNU Lesser General Public
** License version 2.1 as published by the Free Software Foundation and
** appearing in the file LICENSE.LGPL included in the packaging of this
** file. Please review the following information to ensure the GNU Lesser
** General Public License version 2.1 requirements will be met:
** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain additional
** rights. These rights are described in the Nokia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU General
** Public License version 3.0 as published by the Free Software Foundation
** and appearing in the file LICENSE.GPL included in the packaging of this
** file. Please review the following information to ensure the GNU General
** Public License version 3.0 requirements will be met:
** http://www.gnu.org/copyleft/gpl.html.
**
** Other Usage
** Alternatively, this file may be used in accordance with the terms and
** conditions contained in a signed written agreement between you and Nokia.
**
**
**
**
**
** $QT_END_LICENSE$
**
****************************************************************************/

//TESTED_COMPONENT=src/multimedia

testcase = {

/* Notes
Ensure radio reception is available in testing area
A device specific headset is required to be connected to device for radio testing
*/

    initTestCase: function()
    {
    },

 play_a_radio_transmission: function()
    {
        // Test meta data
        testTitle = "Multimedia - Play Radio Transmission";
        testBinary = "radio";
        testSource ="$QTDIR/qtmultimediakit/examples/Radio"
        testGoal = "Verify that radio stations can be played.";
        testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antena to the device and must be connected.";
        testGroups = "BAT, 1.2";

        // Test steps
        prompt(twiki("---+++ " + testApplication + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>

           | *Step* | *Verification* |
           | Launch " + testBinary + " | App launches normally |
           | | Verify that 0 KHz and No Signal is displayed |
           | Select [Scan Up] | Audible white noise should be heard as the radio searches for a frequency lock. Frequency should be increasing in 100 KHz steps until a strong signal is found |
           | | Verify that a radio signal can be heard. It is possible for the radio to lock on a silent station signal, in that case progress further up the frequencies |
           | Once a strong audible signal is found | Verify that the stations frequency and Got Signal message is displayed |
           | Select [Scan Up] | Verify that the radio has moved off the previous station and in progressing through the frequencies |
           | Once on a radio station, Select [Freq Up] | Verify that the radio frequency has moved off the station by 100KHz and is stationary |
           | Select [Freq Up] again | Verify that the radio frequency has moved up another 100KHz and is stationary |
           | Select [Freq Down] twice | Verify that you are now at the frequency of the previous radio station and that the signal is audible |
           | Select [Scan Down] | Verify that the radio has moved off the previous station, progressing through the frequencies, and finds the original station from this test |
           | Exit the radio application | Verify that the radio station is no longer heard |
         "));
    },

    radio_interrupted_by_system_notification: function()
    {
        // Test meta data
        testTitle = "Multimedia - Radio interrupted by System Notification";
        testBinary = "radio";
        testSource ="$QTDIR/qtmultimediakit/examples/Radio"
        testGoal = "Verify that radio can recover audio playback from various system notifications.";
        testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antena to the device and must be connected.";
        testGroups = "BAT, 1.2";

        // Test steps
        prompt(twiki("---+++ " + testApplication + "<br><br>
            *Goal:* " + testGoal + "<br>
            *Pre-Requisites:* " + testPreconditions + "<br>
            *Tested Binary:* " + testBinary + "<br>

           | *Step* | *Verification* |
           | Launch " + testBinary + " | App launches normally |
           | Locate a strong radio station signal by scanning up/down | |
           | While on a strong and audible radio signal, evoke a system notification on device (eg: incoming SMS, alarm notification) | Verify that the radio has muted, and after the system notification has been delivered, the radio reverts to outputting the audio signal back through the headphones |
           | While on a strong and audible radio signal, call the device | Verify that the radio has been muted, and stays muted during the duration of the call, and resumes once the call has ended  |
           "));
    },

    radio_volume_control: function()
    {
     // Test meta data
     testTitle = "Multimedia - Radio Volume Control";
     testBinary = "radio";
     testGoal = "Verify that the radio volume can be controlled via volume controls.";
     testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antena to the device and must be connected.";
     testGroups = "BAT, 1.2";

     // Test steps
     prompt(twiki("---+++ " + testApplication + "<br><br>
         *Goal:* " + testGoal + "<br>
         *Pre-Requisites:* " + testPreconditions + "<br>
         *Tested Binary:* " + testBinary + "<br>

        | *Step* | *Verification* |
        | Launch " + testBinary + " | App launches normally |
        | Locate a strong radio station signal by scanning up or down the frequency | |
        | While on a strong and audible radio signal, move volume slider to the right | Verify that the audio volume of the radio station is amplified |
        | Move volume slider to the left | Verify that the audio volume is lowered |
        | Move the volume slider all the way to the left | Verify that the sound is now completely muted |
        | Return the volume to a value above 50% and click the Mute/unmute comend | Verify that the audio changes from being muted to unmuted and back |
       "));
    },

    display_radio_metadata: function()
    {
     // Test meta data
     testTitle = "Multimedia - Display Radio Metadata";
     testBinary = "radio";
     testGoal = "Verify that the radio API can display properly formated meta data.";
     testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antena to the device and must be connected.";
     testGroups = "BAT, 1.2";

     // Test steps
     prompt(twiki("---+++ " + testApplication + "<br><br>
         *Goal:* " + testGoal + "<br>
         *Pre-Requisites:* " + testPreconditions + "<br>
         *Tested Binary:* " + testBinary + "<br>

        | *Step* | *Verification* |
        | Launch " + testBinary + " | App launches normally |
        | Locate a strong radio station signal by scanning up or down the frequency | Verify that the Frequency field is populated with the correct frequency for the given radio station |
        |  | Verify that the Volume field is displaying the proper volume % |
        | Click on the Mute/Unmute comand | Verify that Muted field changes from 'false' to 'true' and back  |
        |  | If applicable, confirm that the Station Name field is properly displayed |
        |  | If applicable, confirm that the Station Id field is properly displayed |
        |  | If applicable, confirm that the Program Type field is properly displayed |
        |  | If applicable, confirm that the PRadio Text field is properly displayed |
       "));
    },
}