diff options
Diffstat (limited to 'chromium/third_party/cygwin/lib/perl5/5.10/i686-cygwin/CORE/uconfig.h')
| -rw-r--r-- | chromium/third_party/cygwin/lib/perl5/5.10/i686-cygwin/CORE/uconfig.h | 4481 |
1 files changed, 0 insertions, 4481 deletions
diff --git a/chromium/third_party/cygwin/lib/perl5/5.10/i686-cygwin/CORE/uconfig.h b/chromium/third_party/cygwin/lib/perl5/5.10/i686-cygwin/CORE/uconfig.h deleted file mode 100644 index 10dcda66981..00000000000 --- a/chromium/third_party/cygwin/lib/perl5/5.10/i686-cygwin/CORE/uconfig.h +++ /dev/null @@ -1,4481 +0,0 @@ -/* - * This file was produced by running the config_h.SH script, which - * gets its values from uconfig.sh, which is generally produced by - * running Configure. - * - * Feel free to modify any of this as the need arises. Note, however, - * that running config_h.SH again will wipe out any changes you've made. - * For a more permanent change edit uconfig.sh and rerun config_h.SH. - * - * $Id: Config_h.U 1 2006-08-24 12:32:52Z rmanfredi $ - */ - -/* - * Package name : perl5 - * Source directory : . - * Configuration time: Thu Jan 1 00:00:00 GMT 1970 - * Configured by : root@localhost - * Target system : unknown - */ - -#ifndef _config_h_ -#define _config_h_ - -/* LOC_SED: - * This symbol holds the complete pathname to the sed program. - */ -#define LOC_SED "" /**/ - -/* HAS_ALARM: - * This symbol, if defined, indicates that the alarm routine is - * available. - */ -/*#define HAS_ALARM / **/ - -/* HAS_BCMP: - * This symbol is defined if the bcmp() routine is available to - * compare blocks of memory. - */ -/*#define HAS_BCMP / **/ - -/* HAS_BCOPY: - * This symbol is defined if the bcopy() routine is available to - * copy blocks of memory. - */ -/*#define HAS_BCOPY / **/ - -/* HAS_BZERO: - * This symbol is defined if the bzero() routine is available to - * set a memory block to 0. - */ -/*#define HAS_BZERO / **/ - -/* HAS_CHOWN: - * This symbol, if defined, indicates that the chown routine is - * available. - */ -/*#define HAS_CHOWN / **/ - -/* HAS_CHROOT: - * This symbol, if defined, indicates that the chroot routine is - * available. - */ -/*#define HAS_CHROOT / **/ - -/* HAS_CHSIZE: - * This symbol, if defined, indicates that the chsize routine is available - * to truncate files. You might need a -lx to get this routine. - */ -/*#define HAS_CHSIZE / **/ - -/* HAS_CTERMID: - * This symbol, if defined, indicates that the ctermid routine is - * available to generate filename for terminal. - */ -/*#define HAS_CTERMID / **/ - -/* HAS_CUSERID: - * This symbol, if defined, indicates that the cuserid routine is - * available to get character login names. - */ -/*#define HAS_CUSERID / **/ - -/* HAS_DBL_DIG: - * This symbol, if defined, indicates that this system's <float.h> - * or <limits.h> defines the symbol DBL_DIG, which is the number - * of significant digits in a double precision number. If this - * symbol is not defined, a guess of 15 is usually pretty good. - */ -/*#define HAS_DBL_DIG / * */ - -/* HAS_DIFFTIME: - * This symbol, if defined, indicates that the difftime routine is - * available. - */ -/*#define HAS_DIFFTIME / **/ - -/* HAS_DLERROR: - * This symbol, if defined, indicates that the dlerror routine is - * available to return a string describing the last error that - * occurred from a call to dlopen(), dlclose() or dlsym(). - */ -/*#define HAS_DLERROR / **/ - -/* HAS_DUP2: - * This symbol, if defined, indicates that the dup2 routine is - * available to duplicate file descriptors. - */ -/*#define HAS_DUP2 / **/ - -/* HAS_FCHMOD: - * This symbol, if defined, indicates that the fchmod routine is available - * to change mode of opened files. If unavailable, use chmod(). - */ -/*#define HAS_FCHMOD / **/ - -/* HAS_FCHOWN: - * This symbol, if defined, indicates that the fchown routine is available - * to change ownership of opened files. If unavailable, use chown(). - */ -/*#define HAS_FCHOWN / **/ - -/* HAS_FCNTL: - * This symbol, if defined, indicates to the C program that - * the fcntl() function exists. - */ -/*#define HAS_FCNTL / **/ - -/* HAS_FGETPOS: - * This symbol, if defined, indicates that the fgetpos routine is - * available to get the file position indicator, similar to ftell(). - */ -/*#define HAS_FGETPOS / **/ - -/* HAS_FLOCK: - * This symbol, if defined, indicates that the flock routine is - * available to do file locking. - */ -/*#define HAS_FLOCK / **/ - -/* HAS_FORK: - * This symbol, if defined, indicates that the fork routine is - * available. - */ -#define HAS_FORK /**/ - -/* HAS_FSETPOS: - * This symbol, if defined, indicates that the fsetpos routine is - * available to set the file position indicator, similar to fseek(). - */ -/*#define HAS_FSETPOS / **/ - -/* HAS_GETTIMEOFDAY: - * This symbol, if defined, indicates that the gettimeofday() system - * call is available for a sub-second accuracy clock. Usually, the file - * <sys/resource.h> needs to be included (see I_SYS_RESOURCE). - * The type "Timeval" should be used to refer to "struct timeval". - */ -/*#define HAS_GETTIMEOFDAY / **/ -#ifdef HAS_GETTIMEOFDAY -#define Timeval struct timeval /* Structure used by gettimeofday() */ -#endif - -/* HAS_GETGROUPS: - * This symbol, if defined, indicates that the getgroups() routine is - * available to get the list of process groups. If unavailable, multiple - * groups are probably not supported. - */ -/*#define HAS_GETGROUPS / **/ - -/* HAS_GETLOGIN: - * This symbol, if defined, indicates that the getlogin routine is - * available to get the login name. - */ -/*#define HAS_GETLOGIN / **/ - -/* HAS_GETPGID: - * This symbol, if defined, indicates to the C program that - * the getpgid(pid) function is available to get the - * process group id. - */ -/*#define HAS_GETPGID / **/ - -/* HAS_GETPGRP2: - * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX) - * routine is available to get the current process group. - */ -/*#define HAS_GETPGRP2 / **/ - -/* HAS_GETPPID: - * This symbol, if defined, indicates that the getppid routine is - * available to get the parent process ID. - */ -/*#define HAS_GETPPID / **/ - -/* HAS_GETPRIORITY: - * This symbol, if defined, indicates that the getpriority routine is - * available to get a process's priority. - */ -/*#define HAS_GETPRIORITY / **/ - -/* HAS_INET_ATON: - * This symbol, if defined, indicates to the C program that the - * inet_aton() function is available to parse IP address "dotted-quad" - * strings. - */ -/*#define HAS_INET_ATON / **/ - -/* HAS_KILLPG: - * This symbol, if defined, indicates that the killpg routine is available - * to kill process groups. If unavailable, you probably should use kill - * with a negative process number. - */ -/*#define HAS_KILLPG / **/ - -/* HAS_LINK: - * This symbol, if defined, indicates that the link routine is - * available to create hard links. - */ -/*#define HAS_LINK / **/ - -/* HAS_LOCALECONV: - * This symbol, if defined, indicates that the localeconv routine is - * available for numeric and monetary formatting conventions. - */ -/*#define HAS_LOCALECONV / **/ - -/* HAS_LOCKF: - * This symbol, if defined, indicates that the lockf routine is - * available to do file locking. - */ -/*#define HAS_LOCKF / **/ - -/* HAS_LSTAT: - * This symbol, if defined, indicates that the lstat routine is - * available to do file stats on symbolic links. - */ -/*#define HAS_LSTAT / **/ - -/* HAS_MBLEN: - * This symbol, if defined, indicates that the mblen routine is available - * to find the number of bytes in a multibye character. - */ -/*#define HAS_MBLEN / **/ - -/* HAS_MBSTOWCS: - * This symbol, if defined, indicates that the mbstowcs routine is - * available to covert a multibyte string into a wide character string. - */ -/*#define HAS_MBSTOWCS / **/ - -/* HAS_MBTOWC: - * This symbol, if defined, indicates that the mbtowc routine is available - * to covert a multibyte to a wide character. - */ -/*#define HAS_MBTOWC / **/ - -/* HAS_MEMCMP: - * This symbol, if defined, indicates that the memcmp routine is available - * to compare blocks of memory. - */ -#define HAS_MEMCMP /**/ - -/* HAS_MEMCPY: - * This symbol, if defined, indicates that the memcpy routine is available - * to copy blocks of memory. - */ -#define HAS_MEMCPY /**/ - -/* HAS_MEMMOVE: - * This symbol, if defined, indicates that the memmove routine is available - * to copy potentially overlapping blocks of memory. This should be used - * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your - * own version. - */ -/*#define HAS_MEMMOVE / **/ - -/* HAS_MEMSET: - * This symbol, if defined, indicates that the memset routine is available - * to set blocks of memory. - */ -/*#define HAS_MEMSET / **/ - -/* HAS_MKDIR: - * This symbol, if defined, indicates that the mkdir routine is available - * to create directories. Otherwise you should fork off a new process to - * exec /bin/mkdir. - */ -/*#define HAS_MKDIR / **/ - -/* HAS_MKFIFO: - * This symbol, if defined, indicates that the mkfifo routine is - * available to create FIFOs. Otherwise, mknod should be able to - * do it for you. However, if mkfifo is there, mknod might require - * super-user privileges which mkfifo will not. - */ -/*#define HAS_MKFIFO / **/ - -/* HAS_MKTIME: - * This symbol, if defined, indicates that the mktime routine is - * available. - */ -/*#define HAS_MKTIME / **/ - -/* HAS_MSYNC: - * This symbol, if defined, indicates that the msync system call is - * available to synchronize a mapped file. - */ -/*#define HAS_MSYNC / **/ - -/* HAS_MUNMAP: - * This symbol, if defined, indicates that the munmap system call is - * available to unmap a region, usually mapped by mmap(). - */ -/*#define HAS_MUNMAP / **/ - -/* HAS_NICE: - * This symbol, if defined, indicates that the nice routine is - * available. - */ -/*#define HAS_NICE / **/ - -/* HAS_PATHCONF: - * This symbol, if defined, indicates that pathconf() is available - * to determine file-system related limits and options associated - * with a given filename. - */ -/* HAS_FPATHCONF: - * This symbol, if defined, indicates that pathconf() is available - * to determine file-system related limits and options associated - * with a given open file descriptor. - */ -/*#define HAS_PATHCONF / **/ -/*#define HAS_FPATHCONF / **/ - -/* HAS_PAUSE: - * This symbol, if defined, indicates that the pause routine is - * available to suspend a process until a signal is received. - */ -/*#define HAS_PAUSE / **/ - -/* HAS_PIPE: - * This symbol, if defined, indicates that the pipe routine is - * available to create an inter-process channel. - */ -/*#define HAS_PIPE / **/ - -/* HAS_READDIR: - * This symbol, if defined, indicates that the readdir routine is - * available to read directory entries. You may have to include - * <dirent.h>. See I_DIRENT. - */ -#define HAS_READDIR /**/ - -/* HAS_SEEKDIR: - * This symbol, if defined, indicates that the seekdir routine is - * available. You may have to include <dirent.h>. See I_DIRENT. - */ -/*#define HAS_SEEKDIR / **/ - -/* HAS_TELLDIR: - * This symbol, if defined, indicates that the telldir routine is - * available. You may have to include <dirent.h>. See I_DIRENT. - */ -/*#define HAS_TELLDIR / **/ - -/* HAS_REWINDDIR: - * This symbol, if defined, indicates that the rewinddir routine is - * available. You may have to include <dirent.h>. See I_DIRENT. - */ -/*#define HAS_REWINDDIR / **/ - -/* HAS_READLINK: - * This symbol, if defined, indicates that the readlink routine is - * available to read the value of a symbolic link. - */ -/*#define HAS_READLINK / **/ - -/* HAS_RENAME: - * This symbol, if defined, indicates that the rename routine is available - * to rename files. Otherwise you should do the unlink(), link(), unlink() - * trick. - */ -#define HAS_RENAME /**/ - -/* HAS_RMDIR: - * This symbol, if defined, indicates that the rmdir routine is - * available to remove directories. Otherwise you should fork off a - * new process to exec /bin/rmdir. - */ -/*#define HAS_RMDIR / **/ - -/* HAS_SELECT: - * This symbol, if defined, indicates that the select routine is - * available to select active file descriptors. If the timeout field - * is used, <sys/time.h> may need to be included. - */ -/*#define HAS_SELECT / **/ - -/* HAS_SETEGID: - * This symbol, if defined, indicates that the setegid routine is available - * to change the effective gid of the current program. - */ -/*#define HAS_SETEGID / **/ - -/* HAS_SETEUID: - * This symbol, if defined, indicates that the seteuid routine is available - * to change the effective uid of the current program. - */ -/*#define HAS_SETEUID / **/ - -/* HAS_SETLINEBUF: - * This symbol, if defined, indicates that the setlinebuf routine is - * available to change stderr or stdout from block-buffered or unbuffered - * to a line-buffered mode. - */ -/*#define HAS_SETLINEBUF / **/ - -/* HAS_SETLOCALE: - * This symbol, if defined, indicates that the setlocale routine is - * available to handle locale-specific ctype implementations. - */ -/*#define HAS_SETLOCALE / **/ - -/* HAS_SETPGID: - * This symbol, if defined, indicates that the setpgid(pid, gpid) - * routine is available to set process group ID. - */ -/*#define HAS_SETPGID / **/ - -/* HAS_SETPGRP2: - * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX) - * routine is available to set the current process group. - */ -/*#define HAS_SETPGRP2 / **/ - -/* HAS_SETPRIORITY: - * This symbol, if defined, indicates that the setpriority routine is - * available to set a process's priority. - */ -/*#define HAS_SETPRIORITY / **/ - -/* HAS_SETREGID: - * This symbol, if defined, indicates that the setregid routine is - * available to change the real and effective gid of the current - * process. - */ -/* HAS_SETRESGID: - * This symbol, if defined, indicates that the setresgid routine is - * available to change the real, effective and saved gid of the current - * process. - */ -/*#define HAS_SETREGID / **/ -/*#define HAS_SETRESGID / **/ - -/* HAS_SETREUID: - * This symbol, if defined, indicates that the setreuid routine is - * available to change the real and effective uid of the current - * process. - */ -/* HAS_SETRESUID: - * This symbol, if defined, indicates that the setresuid routine is - * available to change the real, effective and saved uid of the current - * process. - */ -/*#define HAS_SETREUID / **/ -/*#define HAS_SETRESUID / **/ - -/* HAS_SETRGID: - * This symbol, if defined, indicates that the setrgid routine is available - * to change the real gid of the current program. - */ -/*#define HAS_SETRGID / **/ - -/* HAS_SETRUID: - * This symbol, if defined, indicates that the setruid routine is available - * to change the real uid of the current program. - */ -/*#define HAS_SETRUID / **/ - -/* HAS_SETSID: - * This symbol, if defined, indicates that the setsid routine is - * available to set the process group ID. - */ -/*#define HAS_SETSID / **/ - -/* HAS_STRCHR: - * This symbol is defined to indicate that the strchr()/strrchr() - * functions are available for string searching. If not, try the - * index()/rindex() pair. - */ -/* HAS_INDEX: - * This symbol is defined to indicate that the index()/rindex() - * functions are available for string searching. - */ -/*#define HAS_STRCHR / **/ -/*#define HAS_INDEX / **/ - -/* HAS_STRCOLL: - * This symbol, if defined, indicates that the strcoll routine is - * available to compare strings using collating information. - */ -/*#define HAS_STRCOLL / **/ - -/* HAS_STRTOD: - * This symbol, if defined, indicates that the strtod routine is - * available to provide better numeric string conversion than atof(). - */ -/*#define HAS_STRTOD / **/ - -/* HAS_STRTOL: - * This symbol, if defined, indicates that the strtol routine is available - * to provide better numeric string conversion than atoi() and friends. - */ -/*#define HAS_STRTOL / **/ - -/* HAS_STRXFRM: - * This symbol, if defined, indicates that the strxfrm() routine is - * available to transform strings. - */ -/*#define HAS_STRXFRM / **/ - -/* HAS_SYMLINK: - * This symbol, if defined, indicates that the symlink routine is available - * to create symbolic links. - */ -/*#define HAS_SYMLINK / **/ - -/* HAS_SYSCALL: - * This symbol, if defined, indicates that the syscall routine is - * available to call arbitrary system calls. If undefined, that's tough. - */ -/*#define HAS_SYSCALL / **/ - -/* HAS_SYSCONF: - * This symbol, if defined, indicates that sysconf() is available - * to determine system related limits and options. - */ -/*#define HAS_SYSCONF / **/ - -/* HAS_SYSTEM: - * This symbol, if defined, indicates that the system routine is - * available to issue a shell command. - */ -/*#define HAS_SYSTEM / **/ - -/* HAS_TCGETPGRP: - * This symbol, if defined, indicates that the tcgetpgrp routine is - * available to get foreground process group ID. - */ -/*#define HAS_TCGETPGRP / **/ - -/* HAS_TCSETPGRP: - * This symbol, if defined, indicates that the tcsetpgrp routine is - * available to set foreground process group ID. - */ -/*#define HAS_TCSETPGRP / **/ - -/* HAS_TRUNCATE: - * This symbol, if defined, indicates that the truncate routine is - * available to truncate files. - */ -/*#define HAS_TRUNCATE / **/ - -/* HAS_TZNAME: - * This symbol, if defined, indicates that the tzname[] array is - * available to access timezone names. - */ -/*#define HAS_TZNAME / **/ - -/* HAS_UMASK: - * This symbol, if defined, indicates that the umask routine is - * available to set and get the value of the file creation mask. - */ -/*#define HAS_UMASK / **/ - -/* HAS_USLEEP: - * This symbol, if defined, indicates that the usleep routine is - * available to let the process sleep on a sub-second accuracy. - */ -/*#define HAS_USLEEP / **/ - -/* HAS_WAIT4: - * This symbol, if defined, indicates that wait4() exists. - */ -/*#define HAS_WAIT4 / **/ - -/* HAS_WAITPID: - * This symbol, if defined, indicates that the waitpid routine is - * available to wait for child process. - */ -/*#define HAS_WAITPID / **/ - -/* HAS_WCSTOMBS: - * This symbol, if defined, indicates that the wcstombs routine is - * available to convert wide character strings to multibyte strings. - */ -/*#define HAS_WCSTOMBS / **/ - -/* HAS_WCTOMB: - * This symbol, if defined, indicates that the wctomb routine is available - * to covert a wide character to a multibyte. - */ -/*#define HAS_WCTOMB / **/ - -/* I_ARPA_INET: - * This symbol, if defined, indicates to the C program that it should - * include <arpa/inet.h> to get inet_addr and friends declarations. - */ -/*#define I_ARPA_INET / **/ - -/* I_DBM: - * This symbol, if defined, indicates that <dbm.h> exists and should - * be included. - */ -/* I_RPCSVC_DBM: - * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and - * should be included. - */ -/*#define I_DBM / **/ -/*#define I_RPCSVC_DBM / **/ - -/* I_DLFCN: - * This symbol, if defined, indicates that <dlfcn.h> exists and should - * be included. - */ -/*#define I_DLFCN / **/ - -/* I_FCNTL: - * This manifest constant tells the C program to include <fcntl.h>. - */ -/*#define I_FCNTL / **/ - -/* I_FLOAT: - * This symbol, if defined, indicates to the C program that it should - * include <float.h> to get definition of symbols like DBL_MAX or - * DBL_MIN, i.e. machine dependent floating point values. - */ -/*#define I_FLOAT / **/ - -/* I_GDBM: - * This symbol, if defined, indicates that <gdbm.h> exists and should - * be included. - */ -/*#define I_GDBM / **/ - -/* I_LIMITS: - * This symbol, if defined, indicates to the C program that it should - * include <limits.h> to get definition of symbols like WORD_BIT or - * LONG_MAX, i.e. machine dependant limitations. - */ -/*#define I_LIMITS / **/ - -/* I_LOCALE: - * This symbol, if defined, indicates to the C program that it should - * include <locale.h>. - */ -/*#define I_LOCALE / **/ - -/* I_MATH: - * This symbol, if defined, indicates to the C program that it should - * include <math.h>. - */ -#define I_MATH /**/ - -/* I_MEMORY: - * This symbol, if defined, indicates to the C program that it should - * include <memory.h>. - */ -/*#define I_MEMORY / **/ - -/* I_NETINET_IN: - * This symbol, if defined, indicates to the C program that it should - * include <netinet/in.h>. Otherwise, you may try <sys/in.h>. - */ -/*#define I_NETINET_IN / **/ - -/* I_SFIO: - * This symbol, if defined, indicates to the C program that it should - * include <sfio.h>. - */ -/*#define I_SFIO / **/ - -/* I_STDDEF: - * This symbol, if defined, indicates that <stddef.h> exists and should - * be included. - */ -/*#define I_STDDEF / **/ - -/* I_STDLIB: - * This symbol, if defined, indicates that <stdlib.h> exists and should - * be included. - */ -#define I_STDLIB /**/ - -/* I_STRING: - * This symbol, if defined, indicates to the C program that it should - * include <string.h> (USG systems) instead of <strings.h> (BSD systems). - */ -#define I_STRING /**/ - -/* I_SYS_DIR: - * This symbol, if defined, indicates to the C program that it should - * include <sys/dir.h>. - */ -/*#define I_SYS_DIR / **/ - -/* I_SYS_FILE: - * This symbol, if defined, indicates to the C program that it should - * include <sys/file.h> to get definition of R_OK and friends. - */ -/*#define I_SYS_FILE / **/ - -/* I_SYS_IOCTL: - * This symbol, if defined, indicates that <sys/ioctl.h> exists and should - * be included. Otherwise, include <sgtty.h> or <termio.h>. - */ -/* I_SYS_SOCKIO: - * This symbol, if defined, indicates the <sys/sockio.h> should be included - * to get socket ioctl options, like SIOCATMARK. - */ -/*#define I_SYS_IOCTL / **/ -/*#define I_SYS_SOCKIO / **/ - -/* I_SYS_NDIR: - * This symbol, if defined, indicates to the C program that it should - * include <sys/ndir.h>. - */ -/*#define I_SYS_NDIR / **/ - -/* I_SYS_PARAM: - * This symbol, if defined, indicates to the C program that it should - * include <sys/param.h>. - */ -/*#define I_SYS_PARAM / **/ - -/* I_SYS_RESOURCE: - * This symbol, if defined, indicates to the C program that it should - * include <sys/resource.h>. - */ -/*#define I_SYS_RESOURCE / **/ - -/* I_SYS_SELECT: - * This symbol, if defined, indicates to the C program that it should - * include <sys/select.h> in order to get definition of struct timeval. - */ -/*#define I_SYS_SELECT / **/ - -/* I_SYS_STAT: - * This symbol, if defined, indicates to the C program that it should - * include <sys/stat.h>. - */ -#define I_SYS_STAT /**/ - -/* I_SYS_TIMES: - * This symbol, if defined, indicates to the C program that it should - * include <sys/times.h>. - */ -/*#define I_SYS_TIMES / **/ - -/* I_SYS_TYPES: - * This symbol, if defined, indicates to the C program that it should - * include <sys/types.h>. - */ -/*#define I_SYS_TYPES / **/ - -/* I_SYS_UN: - * This symbol, if defined, indicates to the C program that it should - * include <sys/un.h> to get UNIX domain socket definitions. - */ -/*#define I_SYS_UN / **/ - -/* I_SYS_WAIT: - * This symbol, if defined, indicates to the C program that it should - * include <sys/wait.h>. - */ -/*#define I_SYS_WAIT / **/ - -/* I_TERMIO: - * This symbol, if defined, indicates that the program should include - * <termio.h> rather than <sgtty.h>. There are also differences in - * the ioctl() calls that depend on the value of this symbol. - */ -/* I_TERMIOS: - * This symbol, if defined, indicates that the program should include - * the POSIX termios.h rather than sgtty.h or termio.h. - * There are also differences in the ioctl() calls that depend on the - * value of this symbol. - */ -/* I_SGTTY: - * This symbol, if defined, indicates that the program should include - * <sgtty.h> rather than <termio.h>. There are also differences in - * the ioctl() calls that depend on the value of this symbol. - */ -/*#define I_TERMIO / **/ -/*#define I_TERMIOS / **/ -/*#define I_SGTTY / **/ - -/* I_UNISTD: - * This symbol, if defined, indicates to the C program that it should - * include <unistd.h>. - */ -/*#define I_UNISTD / **/ - -/* I_UTIME: - * This symbol, if defined, indicates to the C program that it should - * include <utime.h>. - */ -/*#define I_UTIME / **/ - -/* I_VALUES: - * This symbol, if defined, indicates to the C program that it should - * include <values.h> to get definition of symbols like MINFLOAT or - * MAXLONG, i.e. machine dependant limitations. Probably, you - * should use <limits.h> instead, if it is available. - */ -/*#define I_VALUES / **/ - -/* I_VFORK: - * This symbol, if defined, indicates to the C program that it should - * include vfork.h. - */ -/*#define I_VFORK / **/ - -/* INTSIZE: - * This symbol contains the value of sizeof(int) so that the C - * preprocessor can make decisions based on it. - */ -/* LONGSIZE: - * This symbol contains the value of sizeof(long) so that the C - * preprocessor can make decisions based on it. - */ -/* SHORTSIZE: - * This symbol contains the value of sizeof(short) so that the C - * preprocessor can make decisions based on it. - */ -#define INTSIZE 4 /**/ -#define LONGSIZE 4 /**/ -#define SHORTSIZE 2 /**/ - -/* MULTIARCH: - * This symbol, if defined, signifies that the build - * process will produce some binary files that are going to be - * used in a cross-platform environment. This is the case for - * example with the NeXT "fat" binaries that contain executables - * for several CPUs. - */ -/*#define MULTIARCH / **/ - -/* HAS_QUAD: - * This symbol, if defined, tells that there's a 64-bit integer type, - * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one - * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T. - */ -/*#define HAS_QUAD / **/ -#ifdef HAS_QUAD -# define Quad_t int64_t /**/ -# define Uquad_t uint64_t /**/ -# define QUADKIND 4 /**/ -# define QUAD_IS_INT 1 -# define QUAD_IS_LONG 2 -# define QUAD_IS_LONG_LONG 3 -# define QUAD_IS_INT64_T 4 -#endif - -/* OSNAME: - * This symbol contains the name of the operating system, as determined - * by Configure. You shouldn't rely on it too much; the specific - * feature tests from Configure are generally more reliable. - */ -/* OSVERS: - * This symbol contains the version of the operating system, as determined - * by Configure. You shouldn't rely on it too much; the specific - * feature tests from Configure are generally more reliable. - */ -#define OSNAME "unknown" /**/ -#define OSVERS "unknown" /**/ - -/* ARCHLIB: - * This variable, if defined, holds the name of the directory in - * which the user wants to put architecture-dependent public - * library files for perl5. It is most often a local directory - * such as /usr/local/lib. Programs using this variable must be - * prepared to deal with filename expansion. If ARCHLIB is the - * same as PRIVLIB, it is not defined, since presumably the - * program already searches PRIVLIB. - */ -/* ARCHLIB_EXP: - * This symbol contains the ~name expanded version of ARCHLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -/*#define ARCHLIB "/usr/local/lib/perl5/5.11/unknown" / **/ -/*#define ARCHLIB_EXP "/usr/local/lib/perl5/5.11/unknown" / **/ - -/* ARCHNAME: - * This symbol holds a string representing the architecture name. - * It may be used to construct an architecture-dependant pathname - * where library files may be held under a private library, for - * instance. - */ -#define ARCHNAME "unknown" /**/ - -/* BIN: - * This symbol holds the path of the bin directory where the package will - * be installed. Program must be prepared to deal with ~name substitution. - */ -/* BIN_EXP: - * This symbol is the filename expanded version of the BIN symbol, for - * programs that do not want to deal with that at run-time. - */ -/* PERL_RELOCATABLE_INC: - * This symbol, if defined, indicates that we'd like to relocate entries - * in @INC at run time based on the location of the perl binary. - */ -#define BIN "/usr/local/bin" /**/ -#define BIN_EXP "/usr/local/bin" /**/ -#define PERL_RELOCATABLE_INC "undef" /**/ - -/* CAT2: - * This macro concatenates 2 tokens together. - */ -/* STRINGIFY: - * This macro surrounds its token with double quotes. - */ -#if 42 == 1 -#define CAT2(a,b) a/**/b -#define STRINGIFY(a) "a" - /* If you can get stringification with catify, tell me how! */ -#endif -#if 42 == 42 -#define PeRl_CaTiFy(a, b) a ## b -#define PeRl_StGiFy(a) #a -/* the additional level of indirection enables these macros to be - * used as arguments to other macros. See K&R 2nd ed., page 231. */ -#define CAT2(a,b) PeRl_CaTiFy(a,b) -#define StGiFy(a) PeRl_StGiFy(a) -#define STRINGIFY(a) PeRl_StGiFy(a) -#endif -#if 42 != 1 && 42 != 42 -# include "Bletch: How does this C preprocessor concatenate tokens?" -#endif - -/* CPPSTDIN: - * This symbol contains the first part of the string which will invoke - * the C preprocessor on the standard input and produce to standard - * output. Typical value of "cc -E" or "/lib/cpp", but it can also - * call a wrapper. See CPPRUN. - */ -/* CPPMINUS: - * This symbol contains the second part of the string which will invoke - * the C preprocessor on the standard input and produce to standard - * output. This symbol will have the value "-" if CPPSTDIN needs a minus - * to specify standard input, otherwise the value is "". - */ -/* CPPRUN: - * This symbol contains the string which will invoke a C preprocessor on - * the standard input and produce to standard output. It needs to end - * with CPPLAST, after all other preprocessor flags have been specified. - * The main difference with CPPSTDIN is that this program will never be a - * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is - * available directly to the user. Note that it may well be different from - * the preprocessor used to compile the C program. - */ -/* CPPLAST: - * This symbol is intended to be used along with CPPRUN in the same manner - * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "". - */ -#define CPPSTDIN "cc -E" -#define CPPMINUS "-" -#define CPPRUN "cc -E" -#define CPPLAST "-" - -/* HAS_ACCESS: - * This manifest constant lets the C program know that the access() - * system call is available to check for accessibility using real UID/GID. - * (always present on UNIX.) - */ -/*#define HAS_ACCESS / **/ - -/* HAS_ACCESSX: - * This symbol, if defined, indicates that the accessx routine is - * available to do extended access checks. - */ -/*#define HAS_ACCESSX / **/ - -/* HAS_ASCTIME_R: - * This symbol, if defined, indicates that the asctime_r routine - * is available to asctime re-entrantly. - */ -/* ASCTIME_R_PROTO: - * This symbol encodes the prototype of asctime_r. - * It is zero if d_asctime_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_asctime_r - * is defined. - */ -/*#define HAS_ASCTIME_R / **/ -#define ASCTIME_R_PROTO 0 /**/ - -/* HASATTRIBUTE_FORMAT: - * Can we handle GCC attribute for checking printf-style formats - */ -/* PRINTF_FORMAT_NULL_OK: - * Allows __printf__ format to be null when checking printf-style - */ -/* HASATTRIBUTE_MALLOC: - * Can we handle GCC attribute for malloc-style functions. - */ -/* HASATTRIBUTE_NONNULL: - * Can we handle GCC attribute for nonnull function parms. - */ -/* HASATTRIBUTE_NORETURN: - * Can we handle GCC attribute for functions that do not return - */ -/* HASATTRIBUTE_PURE: - * Can we handle GCC attribute for pure functions - */ -/* HASATTRIBUTE_UNUSED: - * Can we handle GCC attribute for unused variables and arguments - */ -/* HASATTRIBUTE_WARN_UNUSED_RESULT: - * Can we handle GCC attribute for warning on unused results - */ -/*#define HASATTRIBUTE_FORMAT / **/ -/*#define PRINTF_FORMAT_NULL_OK / **/ -/*#define HASATTRIBUTE_NORETURN / **/ -/*#define HASATTRIBUTE_MALLOC / **/ -/*#define HASATTRIBUTE_NONNULL / **/ -/*#define HASATTRIBUTE_PURE / **/ -/*#define HASATTRIBUTE_UNUSED / **/ -/*#define HASATTRIBUTE_WARN_UNUSED_RESULT / **/ - -/* HASCONST: - * This symbol, if defined, indicates that this C compiler knows about - * the const type. There is no need to actually test for that symbol - * within your programs. The mere use of the "const" keyword will - * trigger the necessary tests. - */ -/*#define HASCONST / **/ -#ifndef HASCONST -#define const -#endif - -/* HAS_CRYPT: - * This symbol, if defined, indicates that the crypt routine is available - * to encrypt passwords and the like. - */ -/*#define HAS_CRYPT / **/ - -/* HAS_CRYPT_R: - * This symbol, if defined, indicates that the crypt_r routine - * is available to crypt re-entrantly. - */ -/* CRYPT_R_PROTO: - * This symbol encodes the prototype of crypt_r. - * It is zero if d_crypt_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_crypt_r - * is defined. - */ -/*#define HAS_CRYPT_R / **/ -#define CRYPT_R_PROTO 0 /**/ - -/* HAS_CSH: - * This symbol, if defined, indicates that the C-shell exists. - */ -/* CSH: - * This symbol, if defined, contains the full pathname of csh. - */ -/*#define HAS_CSH / **/ -#ifdef HAS_CSH -#define CSH "" /**/ -#endif - -/* HAS_CTERMID_R: - * This symbol, if defined, indicates that the ctermid_r routine - * is available to ctermid re-entrantly. - */ -/* CTERMID_R_PROTO: - * This symbol encodes the prototype of ctermid_r. - * It is zero if d_ctermid_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctermid_r - * is defined. - */ -/*#define HAS_CTERMID_R / **/ -#define CTERMID_R_PROTO 0 /**/ - -/* HAS_CTIME_R: - * This symbol, if defined, indicates that the ctime_r routine - * is available to ctime re-entrantly. - */ -/* CTIME_R_PROTO: - * This symbol encodes the prototype of ctime_r. - * It is zero if d_ctime_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctime_r - * is defined. - */ -/*#define HAS_CTIME_R / **/ -#define CTIME_R_PROTO 0 /**/ - -/* SETUID_SCRIPTS_ARE_SECURE_NOW: - * This symbol, if defined, indicates that the bug that prevents - * setuid scripts from being secure is not present in this kernel. - */ -/* DOSUID: - * This symbol, if defined, indicates that the C program should - * check the script that it is executing for setuid/setgid bits, and - * attempt to emulate setuid/setgid on systems that have disabled - * setuid #! scripts because the kernel can't do it securely. - * It is up to the package designer to make sure that this emulation - * is done securely. Among other things, it should do an fstat on - * the script it just opened to make sure it really is a setuid/setgid - * script, it should make sure the arguments passed correspond exactly - * to the argument on the #! line, and it should not trust any - * subprocesses to which it must pass the filename rather than the - * file descriptor of the script to be executed. - */ -/*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/ -/*#define DOSUID / **/ - -/* HAS_DRAND48_R: - * This symbol, if defined, indicates that the drand48_r routine - * is available to drand48 re-entrantly. - */ -/* DRAND48_R_PROTO: - * This symbol encodes the prototype of drand48_r. - * It is zero if d_drand48_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_drand48_r - * is defined. - */ -/*#define HAS_DRAND48_R / **/ -#define DRAND48_R_PROTO 0 /**/ - -/* HAS_DRAND48_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the drand48() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern double drand48(void); - */ -/*#define HAS_DRAND48_PROTO / **/ - -/* HAS_EACCESS: - * This symbol, if defined, indicates that the eaccess routine is - * available to do extended access checks. - */ -/*#define HAS_EACCESS / **/ - -/* HAS_ENDGRENT: - * This symbol, if defined, indicates that the getgrent routine is - * available for finalizing sequential access of the group database. - */ -/*#define HAS_ENDGRENT / **/ - -/* HAS_ENDGRENT_R: - * This symbol, if defined, indicates that the endgrent_r routine - * is available to endgrent re-entrantly. - */ -/* ENDGRENT_R_PROTO: - * This symbol encodes the prototype of endgrent_r. - * It is zero if d_endgrent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endgrent_r - * is defined. - */ -/*#define HAS_ENDGRENT_R / **/ -#define ENDGRENT_R_PROTO 0 /**/ - -/* HAS_ENDHOSTENT: - * This symbol, if defined, indicates that the endhostent() routine is - * available to close whatever was being used for host queries. - */ -/*#define HAS_ENDHOSTENT / **/ - -/* HAS_ENDHOSTENT_R: - * This symbol, if defined, indicates that the endhostent_r routine - * is available to endhostent re-entrantly. - */ -/* ENDHOSTENT_R_PROTO: - * This symbol encodes the prototype of endhostent_r. - * It is zero if d_endhostent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endhostent_r - * is defined. - */ -/*#define HAS_ENDHOSTENT_R / **/ -#define ENDHOSTENT_R_PROTO 0 /**/ - -/* HAS_ENDNETENT: - * This symbol, if defined, indicates that the endnetent() routine is - * available to close whatever was being used for network queries. - */ -/*#define HAS_ENDNETENT / **/ - -/* HAS_ENDNETENT_R: - * This symbol, if defined, indicates that the endnetent_r routine - * is available to endnetent re-entrantly. - */ -/* ENDNETENT_R_PROTO: - * This symbol encodes the prototype of endnetent_r. - * It is zero if d_endnetent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endnetent_r - * is defined. - */ -/*#define HAS_ENDNETENT_R / **/ -#define ENDNETENT_R_PROTO 0 /**/ - -/* HAS_ENDPROTOENT: - * This symbol, if defined, indicates that the endprotoent() routine is - * available to close whatever was being used for protocol queries. - */ -/*#define HAS_ENDPROTOENT / **/ - -/* HAS_ENDPROTOENT_R: - * This symbol, if defined, indicates that the endprotoent_r routine - * is available to endprotoent re-entrantly. - */ -/* ENDPROTOENT_R_PROTO: - * This symbol encodes the prototype of endprotoent_r. - * It is zero if d_endprotoent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endprotoent_r - * is defined. - */ -/*#define HAS_ENDPROTOENT_R / **/ -#define ENDPROTOENT_R_PROTO 0 /**/ - -/* HAS_ENDPWENT: - * This symbol, if defined, indicates that the getgrent routine is - * available for finalizing sequential access of the passwd database. - */ -/*#define HAS_ENDPWENT / **/ - -/* HAS_ENDPWENT_R: - * This symbol, if defined, indicates that the endpwent_r routine - * is available to endpwent re-entrantly. - */ -/* ENDPWENT_R_PROTO: - * This symbol encodes the prototype of endpwent_r. - * It is zero if d_endpwent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endpwent_r - * is defined. - */ -/*#define HAS_ENDPWENT_R / **/ -#define ENDPWENT_R_PROTO 0 /**/ - -/* HAS_ENDSERVENT: - * This symbol, if defined, indicates that the endservent() routine is - * available to close whatever was being used for service queries. - */ -/*#define HAS_ENDSERVENT / **/ - -/* HAS_ENDSERVENT_R: - * This symbol, if defined, indicates that the endservent_r routine - * is available to endservent re-entrantly. - */ -/* ENDSERVENT_R_PROTO: - * This symbol encodes the prototype of endservent_r. - * It is zero if d_endservent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endservent_r - * is defined. - */ -/*#define HAS_ENDSERVENT_R / **/ -#define ENDSERVENT_R_PROTO 0 /**/ - -/* FLEXFILENAMES: - * This symbol, if defined, indicates that the system supports filenames - * longer than 14 characters. - */ -/*#define FLEXFILENAMES / **/ - -/* HAS_GETGRENT: - * This symbol, if defined, indicates that the getgrent routine is - * available for sequential access of the group database. - */ -/*#define HAS_GETGRENT / **/ - -/* HAS_GETGRENT_R: - * This symbol, if defined, indicates that the getgrent_r routine - * is available to getgrent re-entrantly. - */ -/* GETGRENT_R_PROTO: - * This symbol encodes the prototype of getgrent_r. - * It is zero if d_getgrent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrent_r - * is defined. - */ -/*#define HAS_GETGRENT_R / **/ -#define GETGRENT_R_PROTO 0 /**/ - -/* HAS_GETGRGID_R: - * This symbol, if defined, indicates that the getgrgid_r routine - * is available to getgrgid re-entrantly. - */ -/* GETGRGID_R_PROTO: - * This symbol encodes the prototype of getgrgid_r. - * It is zero if d_getgrgid_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrgid_r - * is defined. - */ -/*#define HAS_GETGRGID_R / **/ -#define GETGRGID_R_PROTO 0 /**/ - -/* HAS_GETGRNAM_R: - * This symbol, if defined, indicates that the getgrnam_r routine - * is available to getgrnam re-entrantly. - */ -/* GETGRNAM_R_PROTO: - * This symbol encodes the prototype of getgrnam_r. - * It is zero if d_getgrnam_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrnam_r - * is defined. - */ -/*#define HAS_GETGRNAM_R / **/ -#define GETGRNAM_R_PROTO 0 /**/ - -/* HAS_GETHOSTBYADDR: - * This symbol, if defined, indicates that the gethostbyaddr() routine is - * available to look up hosts by their IP addresses. - */ -/*#define HAS_GETHOSTBYADDR / **/ - -/* HAS_GETHOSTBYNAME: - * This symbol, if defined, indicates that the gethostbyname() routine is - * available to look up host names in some data base or other. - */ -/*#define HAS_GETHOSTBYNAME / **/ - -/* HAS_GETHOSTENT: - * This symbol, if defined, indicates that the gethostent() routine is - * available to look up host names in some data base or another. - */ -/*#define HAS_GETHOSTENT / **/ - -/* HAS_GETHOSTNAME: - * This symbol, if defined, indicates that the C program may use the - * gethostname() routine to derive the host name. See also HAS_UNAME - * and PHOSTNAME. - */ -/* HAS_UNAME: - * This symbol, if defined, indicates that the C program may use the - * uname() routine to derive the host name. See also HAS_GETHOSTNAME - * and PHOSTNAME. - */ -/* PHOSTNAME: - * This symbol, if defined, indicates the command to feed to the - * popen() routine to derive the host name. See also HAS_GETHOSTNAME - * and HAS_UNAME. Note that the command uses a fully qualified path, - * so that it is safe even if used by a process with super-user - * privileges. - */ -/* HAS_PHOSTNAME: - * This symbol, if defined, indicates that the C program may use the - * contents of PHOSTNAME as a command to feed to the popen() routine - * to derive the host name. - */ -/*#define HAS_GETHOSTNAME / **/ -/*#define HAS_UNAME / **/ -/*#define HAS_PHOSTNAME / **/ -#ifdef HAS_PHOSTNAME -#define PHOSTNAME "/bin/hostname" /* How to get the host name */ -#endif - -/* HAS_GETHOSTBYADDR_R: - * This symbol, if defined, indicates that the gethostbyaddr_r routine - * is available to gethostbyaddr re-entrantly. - */ -/* GETHOSTBYADDR_R_PROTO: - * This symbol encodes the prototype of gethostbyaddr_r. - * It is zero if d_gethostbyaddr_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyaddr_r - * is defined. - */ -/*#define HAS_GETHOSTBYADDR_R / **/ -#define GETHOSTBYADDR_R_PROTO 0 /**/ - -/* HAS_GETHOSTBYNAME_R: - * This symbol, if defined, indicates that the gethostbyname_r routine - * is available to gethostbyname re-entrantly. - */ -/* GETHOSTBYNAME_R_PROTO: - * This symbol encodes the prototype of gethostbyname_r. - * It is zero if d_gethostbyname_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyname_r - * is defined. - */ -/*#define HAS_GETHOSTBYNAME_R / **/ -#define GETHOSTBYNAME_R_PROTO 0 /**/ - -/* HAS_GETHOSTENT_R: - * This symbol, if defined, indicates that the gethostent_r routine - * is available to gethostent re-entrantly. - */ -/* GETHOSTENT_R_PROTO: - * This symbol encodes the prototype of gethostent_r. - * It is zero if d_gethostent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostent_r - * is defined. - */ -/*#define HAS_GETHOSTENT_R / **/ -#define GETHOSTENT_R_PROTO 0 /**/ - -/* HAS_GETHOST_PROTOS: - * This symbol, if defined, indicates that <netdb.h> includes - * prototypes for gethostent(), gethostbyname(), and - * gethostbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. - */ -/*#define HAS_GETHOST_PROTOS / **/ - -/* HAS_GETLOGIN_R: - * This symbol, if defined, indicates that the getlogin_r routine - * is available to getlogin re-entrantly. - */ -/* GETLOGIN_R_PROTO: - * This symbol encodes the prototype of getlogin_r. - * It is zero if d_getlogin_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getlogin_r - * is defined. - */ -/*#define HAS_GETLOGIN_R / **/ -#define GETLOGIN_R_PROTO 0 /**/ - -/* HAS_GETNETBYADDR: - * This symbol, if defined, indicates that the getnetbyaddr() routine is - * available to look up networks by their IP addresses. - */ -/*#define HAS_GETNETBYADDR / **/ - -/* HAS_GETNETBYNAME: - * This symbol, if defined, indicates that the getnetbyname() routine is - * available to look up networks by their names. - */ -/*#define HAS_GETNETBYNAME / **/ - -/* HAS_GETNETENT: - * This symbol, if defined, indicates that the getnetent() routine is - * available to look up network names in some data base or another. - */ -/*#define HAS_GETNETENT / **/ - -/* HAS_GETNETBYADDR_R: - * This symbol, if defined, indicates that the getnetbyaddr_r routine - * is available to getnetbyaddr re-entrantly. - */ -/* GETNETBYADDR_R_PROTO: - * This symbol encodes the prototype of getnetbyaddr_r. - * It is zero if d_getnetbyaddr_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyaddr_r - * is defined. - */ -/*#define HAS_GETNETBYADDR_R / **/ -#define GETNETBYADDR_R_PROTO 0 /**/ - -/* HAS_GETNETBYNAME_R: - * This symbol, if defined, indicates that the getnetbyname_r routine - * is available to getnetbyname re-entrantly. - */ -/* GETNETBYNAME_R_PROTO: - * This symbol encodes the prototype of getnetbyname_r. - * It is zero if d_getnetbyname_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyname_r - * is defined. - */ -/*#define HAS_GETNETBYNAME_R / **/ -#define GETNETBYNAME_R_PROTO 0 /**/ - -/* HAS_GETNETENT_R: - * This symbol, if defined, indicates that the getnetent_r routine - * is available to getnetent re-entrantly. - */ -/* GETNETENT_R_PROTO: - * This symbol encodes the prototype of getnetent_r. - * It is zero if d_getnetent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetent_r - * is defined. - */ -/*#define HAS_GETNETENT_R / **/ -#define GETNETENT_R_PROTO 0 /**/ - -/* HAS_GETNET_PROTOS: - * This symbol, if defined, indicates that <netdb.h> includes - * prototypes for getnetent(), getnetbyname(), and - * getnetbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. - */ -/*#define HAS_GETNET_PROTOS / **/ - -/* HAS_GETPROTOENT: - * This symbol, if defined, indicates that the getprotoent() routine is - * available to look up protocols in some data base or another. - */ -/*#define HAS_GETPROTOENT / **/ - -/* HAS_GETPGRP: - * This symbol, if defined, indicates that the getpgrp routine is - * available to get the current process group. - */ -/* USE_BSD_GETPGRP: - * This symbol, if defined, indicates that getpgrp needs one - * arguments whereas USG one needs none. - */ -/*#define HAS_GETPGRP / **/ -/*#define USE_BSD_GETPGRP / **/ - -/* HAS_GETPROTOBYNAME: - * This symbol, if defined, indicates that the getprotobyname() - * routine is available to look up protocols by their name. - */ -/* HAS_GETPROTOBYNUMBER: - * This symbol, if defined, indicates that the getprotobynumber() - * routine is available to look up protocols by their number. - */ -/*#define HAS_GETPROTOBYNAME / **/ -/*#define HAS_GETPROTOBYNUMBER / **/ - -/* HAS_GETPROTOBYNAME_R: - * This symbol, if defined, indicates that the getprotobyname_r routine - * is available to getprotobyname re-entrantly. - */ -/* GETPROTOBYNAME_R_PROTO: - * This symbol encodes the prototype of getprotobyname_r. - * It is zero if d_getprotobyname_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobyname_r - * is defined. - */ -/*#define HAS_GETPROTOBYNAME_R / **/ -#define GETPROTOBYNAME_R_PROTO 0 /**/ - -/* HAS_GETPROTOBYNUMBER_R: - * This symbol, if defined, indicates that the getprotobynumber_r routine - * is available to getprotobynumber re-entrantly. - */ -/* GETPROTOBYNUMBER_R_PROTO: - * This symbol encodes the prototype of getprotobynumber_r. - * It is zero if d_getprotobynumber_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobynumber_r - * is defined. - */ -/*#define HAS_GETPROTOBYNUMBER_R / **/ -#define GETPROTOBYNUMBER_R_PROTO 0 /**/ - -/* HAS_GETPROTOENT_R: - * This symbol, if defined, indicates that the getprotoent_r routine - * is available to getprotoent re-entrantly. - */ -/* GETPROTOENT_R_PROTO: - * This symbol encodes the prototype of getprotoent_r. - * It is zero if d_getprotoent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotoent_r - * is defined. - */ -/*#define HAS_GETPROTOENT_R / **/ -#define GETPROTOENT_R_PROTO 0 /**/ - -/* HAS_GETPROTO_PROTOS: - * This symbol, if defined, indicates that <netdb.h> includes - * prototypes for getprotoent(), getprotobyname(), and - * getprotobyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. - */ -/*#define HAS_GETPROTO_PROTOS / **/ - -/* HAS_GETPWENT: - * This symbol, if defined, indicates that the getpwent routine is - * available for sequential access of the passwd database. - * If this is not available, the older getpw() function may be available. - */ -/*#define HAS_GETPWENT / **/ - -/* HAS_GETPWENT_R: - * This symbol, if defined, indicates that the getpwent_r routine - * is available to getpwent re-entrantly. - */ -/* GETPWENT_R_PROTO: - * This symbol encodes the prototype of getpwent_r. - * It is zero if d_getpwent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwent_r - * is defined. - */ -/*#define HAS_GETPWENT_R / **/ -#define GETPWENT_R_PROTO 0 /**/ - -/* HAS_GETPWNAM_R: - * This symbol, if defined, indicates that the getpwnam_r routine - * is available to getpwnam re-entrantly. - */ -/* GETPWNAM_R_PROTO: - * This symbol encodes the prototype of getpwnam_r. - * It is zero if d_getpwnam_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwnam_r - * is defined. - */ -/*#define HAS_GETPWNAM_R / **/ -#define GETPWNAM_R_PROTO 0 /**/ - -/* HAS_GETPWUID_R: - * This symbol, if defined, indicates that the getpwuid_r routine - * is available to getpwuid re-entrantly. - */ -/* GETPWUID_R_PROTO: - * This symbol encodes the prototype of getpwuid_r. - * It is zero if d_getpwuid_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwuid_r - * is defined. - */ -/*#define HAS_GETPWUID_R / **/ -#define GETPWUID_R_PROTO 0 /**/ - -/* HAS_GETSERVENT: - * This symbol, if defined, indicates that the getservent() routine is - * available to look up network services in some data base or another. - */ -/*#define HAS_GETSERVENT / **/ - -/* HAS_GETSERVBYNAME_R: - * This symbol, if defined, indicates that the getservbyname_r routine - * is available to getservbyname re-entrantly. - */ -/* GETSERVBYNAME_R_PROTO: - * This symbol encodes the prototype of getservbyname_r. - * It is zero if d_getservbyname_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyname_r - * is defined. - */ -/*#define HAS_GETSERVBYNAME_R / **/ -#define GETSERVBYNAME_R_PROTO 0 /**/ - -/* HAS_GETSERVBYPORT_R: - * This symbol, if defined, indicates that the getservbyport_r routine - * is available to getservbyport re-entrantly. - */ -/* GETSERVBYPORT_R_PROTO: - * This symbol encodes the prototype of getservbyport_r. - * It is zero if d_getservbyport_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyport_r - * is defined. - */ -/*#define HAS_GETSERVBYPORT_R / **/ -#define GETSERVBYPORT_R_PROTO 0 /**/ - -/* HAS_GETSERVENT_R: - * This symbol, if defined, indicates that the getservent_r routine - * is available to getservent re-entrantly. - */ -/* GETSERVENT_R_PROTO: - * This symbol encodes the prototype of getservent_r. - * It is zero if d_getservent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservent_r - * is defined. - */ -/*#define HAS_GETSERVENT_R / **/ -#define GETSERVENT_R_PROTO 0 /**/ - -/* HAS_GETSERV_PROTOS: - * This symbol, if defined, indicates that <netdb.h> includes - * prototypes for getservent(), getservbyname(), and - * getservbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. - */ -/*#define HAS_GETSERV_PROTOS / **/ - -/* HAS_GETSPNAM_R: - * This symbol, if defined, indicates that the getspnam_r routine - * is available to getspnam re-entrantly. - */ -/* GETSPNAM_R_PROTO: - * This symbol encodes the prototype of getspnam_r. - * It is zero if d_getspnam_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getspnam_r - * is defined. - */ -/*#define HAS_GETSPNAM_R / **/ -#define GETSPNAM_R_PROTO 0 /**/ - -/* HAS_GETSERVBYNAME: - * This symbol, if defined, indicates that the getservbyname() - * routine is available to look up services by their name. - */ -/* HAS_GETSERVBYPORT: - * This symbol, if defined, indicates that the getservbyport() - * routine is available to look up services by their port. - */ -/*#define HAS_GETSERVBYNAME / **/ -/*#define HAS_GETSERVBYPORT / **/ - -/* HAS_GMTIME_R: - * This symbol, if defined, indicates that the gmtime_r routine - * is available to gmtime re-entrantly. - */ -/* GMTIME_R_PROTO: - * This symbol encodes the prototype of gmtime_r. - * It is zero if d_gmtime_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gmtime_r - * is defined. - */ -/*#define HAS_GMTIME_R / **/ -#define GMTIME_R_PROTO 0 /**/ - -/* HAS_HTONL: - * This symbol, if defined, indicates that the htonl() routine (and - * friends htons() ntohl() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_HTONS: - * This symbol, if defined, indicates that the htons() routine (and - * friends htonl() ntohl() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_NTOHL: - * This symbol, if defined, indicates that the ntohl() routine (and - * friends htonl() htons() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_NTOHS: - * This symbol, if defined, indicates that the ntohs() routine (and - * friends htonl() htons() ntohl()) are available to do network - * order byte swapping. - */ -/*#define HAS_HTONL / **/ -/*#define HAS_HTONS / **/ -/*#define HAS_NTOHL / **/ -/*#define HAS_NTOHS / **/ - -/* HAS_LOCALTIME_R: - * This symbol, if defined, indicates that the localtime_r routine - * is available to localtime re-entrantly. - */ -/* LOCALTIME_R_NEEDS_TZSET: - * Many libc's localtime_r implementations do not call tzset, - * making them differ from localtime(), and making timezone - * changes using $ENV{TZ} without explicitly calling tzset - * impossible. This symbol makes us call tzset before localtime_r - */ -/*#define LOCALTIME_R_NEEDS_TZSET / **/ -#ifdef LOCALTIME_R_NEEDS_TZSET -#define L_R_TZSET tzset(), -#else -#define L_R_TZSET -#endif - -/* LOCALTIME_R_PROTO: - * This symbol encodes the prototype of localtime_r. - * It is zero if d_localtime_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_localtime_r - * is defined. - */ -/*#define HAS_LOCALTIME_R / **/ -#define LOCALTIME_R_PROTO 0 /**/ - -/* HAS_LONG_DOUBLE: - * This symbol will be defined if the C compiler supports long - * doubles. - */ -/* LONG_DOUBLESIZE: - * This symbol contains the size of a long double, so that the - * C preprocessor can make decisions based on it. It is only - * defined if the system supports long doubles. - */ -/*#define HAS_LONG_DOUBLE / **/ -#ifdef HAS_LONG_DOUBLE -#define LONG_DOUBLESIZE 8 /**/ -#endif - -/* HAS_LONG_LONG: - * This symbol will be defined if the C compiler supports long long. - */ -/* LONGLONGSIZE: - * This symbol contains the size of a long long, so that the - * C preprocessor can make decisions based on it. It is only - * defined if the system supports long long. - */ -/*#define HAS_LONG_LONG / **/ -#ifdef HAS_LONG_LONG -#define LONGLONGSIZE 8 /**/ -#endif - -/* HAS_LSEEK_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the lseek() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern off_t lseek(int, off_t, int); - */ -/*#define HAS_LSEEK_PROTO / **/ - -/* HAS_MEMCHR: - * This symbol, if defined, indicates that the memchr routine is available - * to locate characters within a C string. - */ -#define HAS_MEMCHR /**/ - -/* HAS_MKSTEMP: - * This symbol, if defined, indicates that the mkstemp routine is - * available to exclusively create and open a uniquely named - * temporary file. - */ -/*#define HAS_MKSTEMP / **/ - -/* HAS_MMAP: - * This symbol, if defined, indicates that the mmap system call is - * available to map a file into memory. - */ -/* Mmap_t: - * This symbol holds the return type of the mmap() system call - * (and simultaneously the type of the first argument). - * Usually set to 'void *' or 'caddr_t'. - */ -/*#define HAS_MMAP / **/ -#define Mmap_t void * /**/ - -/* HAS_MSG: - * This symbol, if defined, indicates that the entire msg*(2) library is - * supported (IPC mechanism based on message queues). - */ -/*#define HAS_MSG / **/ - -/* HAS_POLL: - * This symbol, if defined, indicates that the poll routine is - * available to poll active file descriptors. Please check I_POLL and - * I_SYS_POLL to know which header should be included as well. - */ -/*#define HAS_POLL / **/ - -/* OLD_PTHREAD_CREATE_JOINABLE: - * This symbol, if defined, indicates how to create pthread - * in joinable (aka undetached) state. NOTE: not defined - * if pthread.h already has defined PTHREAD_CREATE_JOINABLE - * (the new version of the constant). - * If defined, known values are PTHREAD_CREATE_UNDETACHED - * and __UNDETACHED. - */ -/*#define OLD_PTHREAD_CREATE_JOINABLE / **/ - -/* HAS_PTHREAD_ATFORK: - * This symbol, if defined, indicates that the pthread_atfork routine - * is available to setup fork handlers. - */ -/*#define HAS_PTHREAD_ATFORK / **/ - -/* HAS_PTHREAD_YIELD: - * This symbol, if defined, indicates that the pthread_yield - * routine is available to yield the execution of the current - * thread. sched_yield is preferable to pthread_yield. - */ -/* SCHED_YIELD: - * This symbol defines the way to yield the execution of - * the current thread. Known ways are sched_yield, - * pthread_yield, and pthread_yield with NULL. - */ -/* HAS_SCHED_YIELD: - * This symbol, if defined, indicates that the sched_yield - * routine is available to yield the execution of the current - * thread. sched_yield is preferable to pthread_yield. - */ -/*#define HAS_PTHREAD_YIELD / **/ -#define SCHED_YIELD sched_yield() /**/ -/*#define HAS_SCHED_YIELD / **/ - -/* HAS_RANDOM_R: - * This symbol, if defined, indicates that the random_r routine - * is available to random re-entrantly. - */ -/* RANDOM_R_PROTO: - * This symbol encodes the prototype of random_r. - * It is zero if d_random_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_random_r - * is defined. - */ -/*#define HAS_RANDOM_R / **/ -#define RANDOM_R_PROTO 0 /**/ - -/* HAS_READDIR64_R: - * This symbol, if defined, indicates that the readdir64_r routine - * is available to readdir64 re-entrantly. - */ -/* READDIR64_R_PROTO: - * This symbol encodes the prototype of readdir64_r. - * It is zero if d_readdir64_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir64_r - * is defined. - */ -/*#define HAS_READDIR64_R / **/ -#define READDIR64_R_PROTO 0 /**/ - -/* HAS_READDIR_R: - * This symbol, if defined, indicates that the readdir_r routine - * is available to readdir re-entrantly. - */ -/* READDIR_R_PROTO: - * This symbol encodes the prototype of readdir_r. - * It is zero if d_readdir_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir_r - * is defined. - */ -/*#define HAS_READDIR_R / **/ -#define READDIR_R_PROTO 0 /**/ - -/* HAS_SEM: - * This symbol, if defined, indicates that the entire sem*(2) library is - * supported. - */ -/*#define HAS_SEM / **/ - -/* HAS_SETGRENT: - * This symbol, if defined, indicates that the setgrent routine is - * available for initializing sequential access of the group database. - */ -/*#define HAS_SETGRENT / **/ - -/* HAS_SETGRENT_R: - * This symbol, if defined, indicates that the setgrent_r routine - * is available to setgrent re-entrantly. - */ -/* SETGRENT_R_PROTO: - * This symbol encodes the prototype of setgrent_r. - * It is zero if d_setgrent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setgrent_r - * is defined. - */ -/*#define HAS_SETGRENT_R / **/ -#define SETGRENT_R_PROTO 0 /**/ - -/* HAS_SETGROUPS: - * This symbol, if defined, indicates that the setgroups() routine is - * available to set the list of process groups. If unavailable, multiple - * groups are probably not supported. - */ -/*#define HAS_SETGROUPS / **/ - -/* HAS_SETHOSTENT: - * This symbol, if defined, indicates that the sethostent() routine is - * available. - */ -/*#define HAS_SETHOSTENT / **/ - -/* HAS_SETHOSTENT_R: - * This symbol, if defined, indicates that the sethostent_r routine - * is available to sethostent re-entrantly. - */ -/* SETHOSTENT_R_PROTO: - * This symbol encodes the prototype of sethostent_r. - * It is zero if d_sethostent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_sethostent_r - * is defined. - */ -/*#define HAS_SETHOSTENT_R / **/ -#define SETHOSTENT_R_PROTO 0 /**/ - -/* HAS_SETLOCALE_R: - * This symbol, if defined, indicates that the setlocale_r routine - * is available to setlocale re-entrantly. - */ -/* SETLOCALE_R_PROTO: - * This symbol encodes the prototype of setlocale_r. - * It is zero if d_setlocale_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setlocale_r - * is defined. - */ -/*#define HAS_SETLOCALE_R / **/ -#define SETLOCALE_R_PROTO 0 /**/ - -/* HAS_SETNETENT: - * This symbol, if defined, indicates that the setnetent() routine is - * available. - */ -/*#define HAS_SETNETENT / **/ - -/* HAS_SETNETENT_R: - * This symbol, if defined, indicates that the setnetent_r routine - * is available to setnetent re-entrantly. - */ -/* SETNETENT_R_PROTO: - * This symbol encodes the prototype of setnetent_r. - * It is zero if d_setnetent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setnetent_r - * is defined. - */ -/*#define HAS_SETNETENT_R / **/ -#define SETNETENT_R_PROTO 0 /**/ - -/* HAS_SETPROTOENT: - * This symbol, if defined, indicates that the setprotoent() routine is - * available. - */ -/*#define HAS_SETPROTOENT / **/ - -/* HAS_SETPGRP: - * This symbol, if defined, indicates that the setpgrp routine is - * available to set the current process group. - */ -/* USE_BSD_SETPGRP: - * This symbol, if defined, indicates that setpgrp needs two - * arguments whereas USG one needs none. See also HAS_SETPGID - * for a POSIX interface. - */ -/*#define HAS_SETPGRP / **/ -/*#define USE_BSD_SETPGRP / **/ - -/* HAS_SETPROTOENT_R: - * This symbol, if defined, indicates that the setprotoent_r routine - * is available to setprotoent re-entrantly. - */ -/* SETPROTOENT_R_PROTO: - * This symbol encodes the prototype of setprotoent_r. - * It is zero if d_setprotoent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setprotoent_r - * is defined. - */ -/*#define HAS_SETPROTOENT_R / **/ -#define SETPROTOENT_R_PROTO 0 /**/ - -/* HAS_SETPWENT: - * This symbol, if defined, indicates that the setpwent routine is - * available for initializing sequential access of the passwd database. - */ -/*#define HAS_SETPWENT / **/ - -/* HAS_SETPWENT_R: - * This symbol, if defined, indicates that the setpwent_r routine - * is available to setpwent re-entrantly. - */ -/* SETPWENT_R_PROTO: - * This symbol encodes the prototype of setpwent_r. - * It is zero if d_setpwent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setpwent_r - * is defined. - */ -/*#define HAS_SETPWENT_R / **/ -#define SETPWENT_R_PROTO 0 /**/ - -/* HAS_SETSERVENT: - * This symbol, if defined, indicates that the setservent() routine is - * available. - */ -/*#define HAS_SETSERVENT / **/ - -/* HAS_SETSERVENT_R: - * This symbol, if defined, indicates that the setservent_r routine - * is available to setservent re-entrantly. - */ -/* SETSERVENT_R_PROTO: - * This symbol encodes the prototype of setservent_r. - * It is zero if d_setservent_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setservent_r - * is defined. - */ -/*#define HAS_SETSERVENT_R / **/ -#define SETSERVENT_R_PROTO 0 /**/ - -/* HAS_SETVBUF: - * This symbol, if defined, indicates that the setvbuf routine is - * available to change buffering on an open stdio stream. - * to a line-buffered mode. - */ -/*#define HAS_SETVBUF / **/ - -/* HAS_SHM: - * This symbol, if defined, indicates that the entire shm*(2) library is - * supported. - */ -/*#define HAS_SHM / **/ - -/* Shmat_t: - * This symbol holds the return type of the shmat() system call. - * Usually set to 'void *' or 'char *'. - */ -/* HAS_SHMAT_PROTOTYPE: - * This symbol, if defined, indicates that the sys/shm.h includes - * a prototype for shmat(). Otherwise, it is up to the program to - * guess one. Shmat_t shmat(int, Shmat_t, int) is a good guess, - * but not always right so it should be emitted by the program only - * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs. - */ -#define Shmat_t void * /**/ -/*#define HAS_SHMAT_PROTOTYPE / **/ - -/* HAS_SOCKET: - * This symbol, if defined, indicates that the BSD socket interface is - * supported. - */ -/* HAS_SOCKETPAIR: - * This symbol, if defined, indicates that the BSD socketpair() call is - * supported. - */ -/* HAS_MSG_CTRUNC: - * This symbol, if defined, indicates that the MSG_CTRUNC is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. - */ -/* HAS_MSG_DONTROUTE: - * This symbol, if defined, indicates that the MSG_DONTROUTE is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. - */ -/* HAS_MSG_OOB: - * This symbol, if defined, indicates that the MSG_OOB is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. - */ -/* HAS_MSG_PEEK: - * This symbol, if defined, indicates that the MSG_PEEK is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. - */ -/* HAS_MSG_PROXY: - * This symbol, if defined, indicates that the MSG_PROXY is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. - */ -/* HAS_SCM_RIGHTS: - * This symbol, if defined, indicates that the SCM_RIGHTS is supported. - * Checking just with #ifdef might not be enough because this symbol - * has been known to be an enum. - */ -/*#define HAS_SOCKET / **/ -/*#define HAS_SOCKETPAIR / **/ -/*#define HAS_MSG_CTRUNC / **/ -/*#define HAS_MSG_DONTROUTE / **/ -/*#define HAS_MSG_OOB / **/ -/*#define HAS_MSG_PEEK / **/ -/*#define HAS_MSG_PROXY / **/ -/*#define HAS_SCM_RIGHTS / **/ - -/* HAS_SRAND48_R: - * This symbol, if defined, indicates that the srand48_r routine - * is available to srand48 re-entrantly. - */ -/* SRAND48_R_PROTO: - * This symbol encodes the prototype of srand48_r. - * It is zero if d_srand48_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srand48_r - * is defined. - */ -/*#define HAS_SRAND48_R / **/ -#define SRAND48_R_PROTO 0 /**/ - -/* HAS_SRANDOM_R: - * This symbol, if defined, indicates that the srandom_r routine - * is available to srandom re-entrantly. - */ -/* SRANDOM_R_PROTO: - * This symbol encodes the prototype of srandom_r. - * It is zero if d_srandom_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srandom_r - * is defined. - */ -/*#define HAS_SRANDOM_R / **/ -#define SRANDOM_R_PROTO 0 /**/ - -/* USE_STAT_BLOCKS: - * This symbol is defined if this system has a stat structure declaring - * st_blksize and st_blocks. - */ -#ifndef USE_STAT_BLOCKS -/*#define USE_STAT_BLOCKS / **/ -#endif - -/* USE_STRUCT_COPY: - * This symbol, if defined, indicates that this C compiler knows how - * to copy structures. If undefined, you'll need to use a block copy - * routine of some sort instead. - */ -/*#define USE_STRUCT_COPY / **/ - -/* HAS_STRERROR: - * This symbol, if defined, indicates that the strerror routine is - * available to translate error numbers to strings. See the writeup - * of Strerror() in this file before you try to define your own. - */ -/* HAS_SYS_ERRLIST: - * This symbol, if defined, indicates that the sys_errlist array is - * available to translate error numbers to strings. The extern int - * sys_nerr gives the size of that table. - */ -/* Strerror: - * This preprocessor symbol is defined as a macro if strerror() is - * not available to translate error numbers to strings but sys_errlist[] - * array is there. - */ -/*#define HAS_STRERROR / **/ -/*#define HAS_SYS_ERRLIST / **/ -#define Strerror(e) strerror(e) - -/* HAS_STRERROR_R: - * This symbol, if defined, indicates that the strerror_r routine - * is available to strerror re-entrantly. - */ -/* STRERROR_R_PROTO: - * This symbol encodes the prototype of strerror_r. - * It is zero if d_strerror_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_strerror_r - * is defined. - */ -/*#define HAS_STRERROR_R / **/ -#define STRERROR_R_PROTO 0 /**/ - -/* HAS_STRTOUL: - * This symbol, if defined, indicates that the strtoul routine is - * available to provide conversion of strings to unsigned long. - */ -#define HAS_STRTOUL /**/ - -/* HAS_TIME: - * This symbol, if defined, indicates that the time() routine exists. - */ -/* Time_t: - * This symbol holds the type returned by time(). It can be long, - * or time_t on BSD sites (in which case <sys/types.h> should be - * included). - */ -#define HAS_TIME /**/ -#define Time_t time_t /* Time type */ - -/* HAS_TIMES: - * This symbol, if defined, indicates that the times() routine exists. - * Note that this became obsolete on some systems (SUNOS), which now - * use getrusage(). It may be necessary to include <sys/times.h>. - */ -/*#define HAS_TIMES / **/ - -/* HAS_TMPNAM_R: - * This symbol, if defined, indicates that the tmpnam_r routine - * is available to tmpnam re-entrantly. - */ -/* TMPNAM_R_PROTO: - * This symbol encodes the prototype of tmpnam_r. - * It is zero if d_tmpnam_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_tmpnam_r - * is defined. - */ -/*#define HAS_TMPNAM_R / **/ -#define TMPNAM_R_PROTO 0 /**/ - -/* HAS_TTYNAME_R: - * This symbol, if defined, indicates that the ttyname_r routine - * is available to ttyname re-entrantly. - */ -/* TTYNAME_R_PROTO: - * This symbol encodes the prototype of ttyname_r. - * It is zero if d_ttyname_r is undef, and one of the - * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ttyname_r - * is defined. - */ -/*#define HAS_TTYNAME_R / **/ -#define TTYNAME_R_PROTO 0 /**/ - -/* HAS_UNION_SEMUN: - * This symbol, if defined, indicates that the union semun is - * defined by including <sys/sem.h>. If not, the user code - * probably needs to define it as: - * union semun { - * int val; - * struct semid_ds *buf; - * unsigned short *array; - * } - */ -/* USE_SEMCTL_SEMUN: - * This symbol, if defined, indicates that union semun is - * used for semctl IPC_STAT. - */ -/* USE_SEMCTL_SEMID_DS: - * This symbol, if defined, indicates that struct semid_ds * is - * used for semctl IPC_STAT. - */ -/*#define HAS_UNION_SEMUN / **/ -/*#define USE_SEMCTL_SEMUN / **/ -/*#define USE_SEMCTL_SEMID_DS / **/ - -/* HAS_VFORK: - * This symbol, if defined, indicates that vfork() exists. - */ -/*#define HAS_VFORK / **/ - -/* HAS_PSEUDOFORK: - * This symbol, if defined, indicates that an emulation of the - * fork routine is available. - */ -/*#define HAS_PSEUDOFORK / **/ - -/* Signal_t: - * This symbol's value is either "void" or "int", corresponding to the - * appropriate return type of a signal handler. Thus, you can declare - * a signal handler using "Signal_t (*handler)()", and define the - * handler using "Signal_t handler(sig)". - */ -#define Signal_t int /* Signal handler's return type */ - -/* HASVOLATILE: - * This symbol, if defined, indicates that this C compiler knows about - * the volatile declaration. - */ -/*#define HASVOLATILE / **/ -#ifndef HASVOLATILE -#define volatile -#endif - -/* Fpos_t: - * This symbol holds the type used to declare file positions in libc. - * It can be fpos_t, long, uint, etc... It may be necessary to include - * <sys/types.h> to get any typedef'ed information. - */ -#define Fpos_t int /* File position type */ - -/* Gid_t_f: - * This symbol defines the format string used for printing a Gid_t. - */ -#define Gid_t_f "lu" /**/ - -/* Gid_t_sign: - * This symbol holds the signedess of a Gid_t. - * 1 for unsigned, -1 for signed. - */ -#define Gid_t_sign 1 /* GID sign */ - -/* Gid_t_size: - * This symbol holds the size of a Gid_t in bytes. - */ -#define Gid_t_size 4 /* GID size */ - -/* Gid_t: - * This symbol holds the return type of getgid() and the type of - * argument to setrgid() and related functions. Typically, - * it is the type of group ids in the kernel. It can be int, ushort, - * gid_t, etc... It may be necessary to include <sys/types.h> to get - * any typedef'ed information. - */ -#define Gid_t int /* Type for getgid(), etc... */ - -/* Groups_t: - * This symbol holds the type used for the second argument to - * getgroups() and setgroups(). Usually, this is the same as - * gidtype (gid_t) , but sometimes it isn't. - * It can be int, ushort, gid_t, etc... - * It may be necessary to include <sys/types.h> to get any - * typedef'ed information. This is only required if you have - * getgroups() or setgroups().. - */ -#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS) -#define Groups_t int /* Type for 2nd arg to [sg]etgroups() */ -#endif - -/* I_DIRENT: - * This symbol, if defined, indicates to the C program that it should - * include <dirent.h>. Using this symbol also triggers the definition - * of the Direntry_t define which ends up being 'struct dirent' or - * 'struct direct' depending on the availability of <dirent.h>. - */ -/* DIRNAMLEN: - * This symbol, if defined, indicates to the C program that the length - * of directory entry names is provided by a d_namlen field. Otherwise - * you need to do strlen() on the d_name field. - */ -/* Direntry_t: - * This symbol is set to 'struct direct' or 'struct dirent' depending on - * whether dirent is available or not. You should use this pseudo type to - * portably declare your directory entries. - */ -#define I_DIRENT /**/ -/*#define DIRNAMLEN / **/ -#define Direntry_t struct dirent - -/* I_GRP: - * This symbol, if defined, indicates to the C program that it should - * include <grp.h>. - */ -/* GRPASSWD: - * This symbol, if defined, indicates to the C program that struct group - * in <grp.h> contains gr_passwd. - */ -/*#define I_GRP / **/ -/*#define GRPASSWD / **/ - -/* I_MACH_CTHREADS: - * This symbol, if defined, indicates to the C program that it should - * include <mach/cthreads.h>. - */ -/*#define I_MACH_CTHREADS / **/ - -/* I_NDBM: - * This symbol, if defined, indicates that <ndbm.h> exists and should - * be included. - */ -/*#define I_NDBM / **/ - -/* I_NETDB: - * This symbol, if defined, indicates that <netdb.h> exists and - * should be included. - */ -/*#define I_NETDB / **/ - -/* I_NET_ERRNO: - * This symbol, if defined, indicates that <net/errno.h> exists and - * should be included. - */ -/*#define I_NET_ERRNO / **/ - -/* I_PTHREAD: - * This symbol, if defined, indicates to the C program that it should - * include <pthread.h>. - */ -/*#define I_PTHREAD / **/ - -/* I_PWD: - * This symbol, if defined, indicates to the C program that it should - * include <pwd.h>. - */ -/* PWQUOTA: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_quota. - */ -/* PWAGE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_age. - */ -/* PWCHANGE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_change. - */ -/* PWCLASS: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_class. - */ -/* PWEXPIRE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_expire. - */ -/* PWCOMMENT: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_comment. - */ -/* PWGECOS: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_gecos. - */ -/* PWPASSWD: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_passwd. - */ -/*#define I_PWD / **/ -/*#define PWQUOTA / **/ -/*#define PWAGE / **/ -/*#define PWCHANGE / **/ -/*#define PWCLASS / **/ -/*#define PWEXPIRE / **/ -/*#define PWCOMMENT / **/ -/*#define PWGECOS / **/ -/*#define PWPASSWD / **/ - -/* I_SYS_ACCESS: - * This symbol, if defined, indicates to the C program that it should - * include <sys/access.h>. - */ -/*#define I_SYS_ACCESS / **/ - -/* I_SYS_SECURITY: - * This symbol, if defined, indicates to the C program that it should - * include <sys/security.h>. - */ -/*#define I_SYS_SECURITY / **/ - -/* I_SYSUIO: - * This symbol, if defined, indicates that <sys/uio.h> exists and - * should be included. - */ -/*#define I_SYSUIO / **/ - -/* I_STDARG: - * This symbol, if defined, indicates that <stdarg.h> exists and should - * be included. - */ -/* I_VARARGS: - * This symbol, if defined, indicates to the C program that it should - * include <varargs.h>. - */ -#define I_STDARG /**/ -/*#define I_VARARGS / **/ - -/* PERL_INC_VERSION_LIST: - * This variable specifies the list of subdirectories in over - * which perl.c:incpush() and lib/lib.pm will automatically - * search when adding directories to @INC, in a format suitable - * for a C initialization string. See the inc_version_list entry - * in Porting/Glossary for more details. - */ -/*#define PERL_INC_VERSION_LIST NULL / **/ - -/* INSTALL_USR_BIN_PERL: - * This symbol, if defined, indicates that Perl is to be installed - * also as /usr/bin/perl. - */ -/*#define INSTALL_USR_BIN_PERL / **/ - -/* Off_t: - * This symbol holds the type used to declare offsets in the kernel. - * It can be int, long, off_t, etc... It may be necessary to include - * <sys/types.h> to get any typedef'ed information. - */ -/* LSEEKSIZE: - * This symbol holds the number of bytes used by the Off_t. - */ -/* Off_t_size: - * This symbol holds the number of bytes used by the Off_t. - */ -#define Off_t int /* <offset> type */ -#define LSEEKSIZE 4 /* <offset> size */ -#define Off_t_size 4 /* <offset> size */ - -/* Free_t: - * This variable contains the return type of free(). It is usually - * void, but occasionally int. - */ -/* Malloc_t: - * This symbol is the type of pointer returned by malloc and realloc. - */ -#define Malloc_t void * /**/ -#define Free_t void /**/ - -/* PERL_MALLOC_WRAP: - * This symbol, if defined, indicates that we'd like malloc wrap checks. - */ -/*#define PERL_MALLOC_WRAP / **/ - -/* MYMALLOC: - * This symbol, if defined, indicates that we're using our own malloc. - */ -/*#define MYMALLOC / **/ - -/* Mode_t: - * This symbol holds the type used to declare file modes - * for systems calls. It is usually mode_t, but may be - * int or unsigned short. It may be necessary to include <sys/types.h> - * to get any typedef'ed information. - */ -#define Mode_t int /* file mode parameter for system calls */ - -/* Netdb_host_t: - * This symbol holds the type used for the 1st argument - * to gethostbyaddr(). - */ -/* Netdb_hlen_t: - * This symbol holds the type used for the 2nd argument - * to gethostbyaddr(). - */ -/* Netdb_name_t: - * This symbol holds the type used for the argument to - * gethostbyname(). - */ -/* Netdb_net_t: - * This symbol holds the type used for the 1st argument to - * getnetbyaddr(). - */ -#define Netdb_host_t const char * /**/ -#define Netdb_hlen_t int /**/ -#define Netdb_name_t const char * /**/ -#define Netdb_net_t unsigned long /**/ - -/* PERL_OTHERLIBDIRS: - * This variable contains a colon-separated set of paths for the perl - * binary to search for additional library files or modules. - * These directories will be tacked to the end of @INC. - * Perl will automatically search below each path for version- - * and architecture-specific directories. See PERL_INC_VERSION_LIST - * for more details. - */ -/*#define PERL_OTHERLIBDIRS " " / **/ - -/* Pid_t: - * This symbol holds the type used to declare process ids in the kernel. - * It can be int, uint, pid_t, etc... It may be necessary to include - * <sys/types.h> to get any typedef'ed information. - */ -#define Pid_t int /* PID type */ - -/* PRIVLIB: - * This symbol contains the name of the private library for this package. - * The library is private in the sense that it needn't be in anyone's - * execution path, but it should be accessible by the world. The program - * should be prepared to do ~ expansion. - */ -/* PRIVLIB_EXP: - * This symbol contains the ~name expanded version of PRIVLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -#define PRIVLIB "/usr/local/lib/perl5/5.11" /**/ -#define PRIVLIB_EXP "/usr/local/lib/perl5/5.11" /**/ - -/* CAN_PROTOTYPE: - * If defined, this macro indicates that the C compiler can handle - * function prototypes. - */ -/* _: - * This macro is used to declare function parameters for folks who want - * to make declarations with prototypes using a different style than - * the above macros. Use double parentheses. For example: - * - * int main _((int argc, char *argv[])); - */ -/*#define CAN_PROTOTYPE / **/ -#ifdef CAN_PROTOTYPE -#define _(args) args -#else -#define _(args) () -#endif - -/* Select_fd_set_t: - * This symbol holds the type used for the 2nd, 3rd, and 4th - * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET - * is defined, and 'int *' otherwise. This is only useful if you - * have select(), of course. - */ -#define Select_fd_set_t int /**/ - -/* SH_PATH: - * This symbol contains the full pathname to the shell used on this - * on this system to execute Bourne shell scripts. Usually, this will be - * /bin/sh, though it's possible that some systems will have /bin/ksh, - * /bin/pdksh, /bin/ash, /bin/bash, or even something such as - * D:/bin/sh.exe. - */ -#define SH_PATH "/bin/sh" /**/ - -/* SIG_NAME: - * This symbol contains a list of signal names in order of - * signal number. This is intended - * to be used as a static array initialization, like this: - * char *sig_name[] = { SIG_NAME }; - * The signals in the list are separated with commas, and each signal - * is surrounded by double quotes. There is no leading SIG in the signal - * name, i.e. SIGQUIT is known as "QUIT". - * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, - * etc., where nn is the actual signal number (e.g. NUM37). - * The signal number for sig_name[i] is stored in sig_num[i]. - * The last element is 0 to terminate the list with a NULL. This - * corresponds to the 0 at the end of the sig_name_init list. - * Note that this variable is initialized from the sig_name_init, - * not from sig_name (which is unused). - */ -/* SIG_NUM: - * This symbol contains a list of signal numbers, in the same order as the - * SIG_NAME list. It is suitable for static array initialization, as in: - * int sig_num[] = { SIG_NUM }; - * The signals in the list are separated with commas, and the indices - * within that list and the SIG_NAME list match, so it's easy to compute - * the signal name from a number or vice versa at the price of a small - * dynamic linear lookup. - * Duplicates are allowed, but are moved to the end of the list. - * The signal number corresponding to sig_name[i] is sig_number[i]. - * if (i < NSIG) then sig_number[i] == i. - * The last element is 0, corresponding to the 0 at the end of - * the sig_name_init list. - * Note that this variable is initialized from the sig_num_init, - * not from sig_num (which is unused). - */ -/* SIG_SIZE: - * This variable contains the number of elements of the SIG_NAME - * and SIG_NUM arrays, excluding the final NULL entry. - */ -#define SIG_NAME 0 /**/ -#define SIG_NUM 0 /**/ -#define SIG_SIZE 1 /**/ - -/* SITEARCH: - * This symbol contains the name of the private library for this package. - * The library is private in the sense that it needn't be in anyone's - * execution path, but it should be accessible by the world. The program - * should be prepared to do ~ expansion. - * The standard distribution will put nothing in this directory. - * After perl has been installed, users may install their own local - * architecture-dependent modules in this directory with - * MakeMaker Makefile.PL - * or equivalent. See INSTALL for details. - */ -/* SITEARCH_EXP: - * This symbol contains the ~name expanded version of SITEARCH, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -/*#define SITEARCH "/usr/local/lib/perl5/5.11/unknown" / **/ -/*#define SITEARCH_EXP "/usr/local/lib/perl5/5.11/unknown" / **/ - -/* SITELIB: - * This symbol contains the name of the private library for this package. - * The library is private in the sense that it needn't be in anyone's - * execution path, but it should be accessible by the world. The program - * should be prepared to do ~ expansion. - * The standard distribution will put nothing in this directory. - * After perl has been installed, users may install their own local - * architecture-independent modules in this directory with - * MakeMaker Makefile.PL - * or equivalent. See INSTALL for details. - */ -/* SITELIB_EXP: - * This symbol contains the ~name expanded version of SITELIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -/* SITELIB_STEM: - * This define is SITELIB_EXP with any trailing version-specific component - * removed. The elements in inc_version_list (inc_version_list.U) can - * be tacked onto this variable to generate a list of directories to search. - */ -#define SITELIB "/usr/local/lib/perl5/5.11" /**/ -#define SITELIB_EXP "/usr/local/lib/perl5/5.11" /**/ -#define SITELIB_STEM "/usr/local/lib/perl5" /**/ - -/* Size_t_size: - * This symbol holds the size of a Size_t in bytes. - */ -#define Size_t_size 4 /* */ - -/* Size_t: - * This symbol holds the type used to declare length parameters - * for string functions. It is usually size_t, but may be - * unsigned long, int, etc. It may be necessary to include - * <sys/types.h> to get any typedef'ed information. - */ -#define Size_t size_t /* length paramater for string functions */ - -/* Sock_size_t: - * This symbol holds the type used for the size argument of - * various socket calls (just the base type, not the pointer-to). - */ -#define Sock_size_t int /**/ - -/* STDCHAR: - * This symbol is defined to be the type of char used in stdio.h. - * It has the values "unsigned char" or "char". - */ -#define STDCHAR char /**/ - -/* Uid_t_f: - * This symbol defines the format string used for printing a Uid_t. - */ -#define Uid_t_f "lu" /**/ - -/* Uid_t_sign: - * This symbol holds the signedess of a Uid_t. - * 1 for unsigned, -1 for signed. - */ -#define Uid_t_sign 1 /* UID sign */ - -/* Uid_t_size: - * This symbol holds the size of a Uid_t in bytes. - */ -#define Uid_t_size 4 /* UID size */ - -/* Uid_t: - * This symbol holds the type used to declare user ids in the kernel. - * It can be int, ushort, uid_t, etc... It may be necessary to include - * <sys/types.h> to get any typedef'ed information. - */ -#define Uid_t int /* UID type */ - -/* USE_ITHREADS: - * This symbol, if defined, indicates that Perl should be built to - * use the interpreter-based threading implementation. - */ -/* USE_5005THREADS: - * This symbol, if defined, indicates that Perl should be built to - * use the 5.005-based threading implementation. - * Only valid up to 5.8.x. - */ -/* OLD_PTHREADS_API: - * This symbol, if defined, indicates that Perl should - * be built to use the old draft POSIX threads API. - */ -/* USE_REENTRANT_API: - * This symbol, if defined, indicates that Perl should - * try to use the various _r versions of library functions. - * This is extremely experimental. - */ -/*#define USE_5005THREADS / **/ -/*#define USE_ITHREADS / **/ -#if defined(USE_5005THREADS) && !defined(USE_ITHREADS) -#define USE_THREADS /* until src is revised*/ -#endif -/*#define OLD_PTHREADS_API / **/ -/*#define USE_REENTRANT_API / **/ - -/* PERL_VENDORARCH: - * If defined, this symbol contains the name of a private library. - * The library is private in the sense that it needn't be in anyone's - * execution path, but it should be accessible by the world. - * It may have a ~ on the front. - * The standard distribution will put nothing in this directory. - * Vendors who distribute perl may wish to place their own - * architecture-dependent modules and extensions in this directory with - * MakeMaker Makefile.PL INSTALLDIRS=vendor - * or equivalent. See INSTALL for details. - */ -/* PERL_VENDORARCH_EXP: - * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -/*#define PERL_VENDORARCH "" / **/ -/*#define PERL_VENDORARCH_EXP "" / **/ - -/* PERL_VENDORLIB_EXP: - * This symbol contains the ~name expanded version of VENDORLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -/* PERL_VENDORLIB_STEM: - * This define is PERL_VENDORLIB_EXP with any trailing version-specific component - * removed. The elements in inc_version_list (inc_version_list.U) can - * be tacked onto this variable to generate a list of directories to search. - */ -/*#define PERL_VENDORLIB_EXP "" / **/ -/*#define PERL_VENDORLIB_STEM "" / **/ - -/* VOIDFLAGS: - * This symbol indicates how much support of the void type is given by this - * compiler. What various bits mean: - * - * 1 = supports declaration of void - * 2 = supports arrays of pointers to functions returning void - * 4 = supports comparisons between pointers to void functions and - * addresses of void functions - * 8 = suports declaration of generic void pointers - * - * The package designer should define VOIDUSED to indicate the requirements - * of the package. This can be done either by #defining VOIDUSED before - * including config.h, or by defining defvoidused in Myinit.U. If the - * latter approach is taken, only those flags will be tested. If the - * level of void support necessary is not present, defines void to int. - */ -#ifndef VOIDUSED -#define VOIDUSED 1 -#endif -#define VOIDFLAGS 1 -#if (VOIDFLAGS & VOIDUSED) != VOIDUSED -#define void int /* is void to be avoided? */ -#define M_VOID /* Xenix strikes again */ -#endif - -/* USE_CROSS_COMPILE: - * This symbol, if defined, indicates that Perl is being cross-compiled. - */ -/* PERL_TARGETARCH: - * This symbol, if defined, indicates the target architecture - * Perl has been cross-compiled to. Undefined if not a cross-compile. - */ -#ifndef USE_CROSS_COMPILE -/*#define USE_CROSS_COMPILE / **/ -#define PERL_TARGETARCH "" /**/ -#endif - -/* MEM_ALIGNBYTES: - * This symbol contains the number of bytes required to align a - * double, or a long double when applicable. Usual values are 2, - * 4 and 8. The default is eight, for safety. - */ -#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH) -# define MEM_ALIGNBYTES 8 -#else -#define MEM_ALIGNBYTES 4 -#endif - -/* BYTEORDER: - * This symbol holds the hexadecimal constant defined in byteorder, - * in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc... - * If the compiler supports cross-compiling or multiple-architecture - * binaries (eg. on NeXT systems), use compiler-defined macros to - * determine the byte order. - * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture - * Binaries (MAB) on either big endian or little endian machines. - * The endian-ness is available at compile-time. This only matters - * for perl, where the config.h can be generated and installed on - * one system, and used by a different architecture to build an - * extension. Older versions of NeXT that might not have - * defined either *_ENDIAN__ were all on Motorola 680x0 series, - * so the default case (for NeXT) is big endian to catch them. - * This might matter for NeXT 3.0. - */ -#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH) -# ifdef __LITTLE_ENDIAN__ -# if LONGSIZE == 4 -# define BYTEORDER 0x1234 -# else -# if LONGSIZE == 8 -# define BYTEORDER 0x12345678 -# endif -# endif -# else -# ifdef __BIG_ENDIAN__ -# if LONGSIZE == 4 -# define BYTEORDER 0x4321 -# else -# if LONGSIZE == 8 -# define BYTEORDER 0x87654321 -# endif -# endif -# endif -# endif -# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__)) -# define BYTEORDER 0x4321 -# endif -#else -#define BYTEORDER 0x1234 /* large digits for MSB */ -#endif /* NeXT */ - -/* CASTI32: - * This symbol is defined if the C compiler can cast negative - * or large floating point numbers to 32-bit ints. - */ -/*#define CASTI32 / **/ - -/* CASTNEGFLOAT: - * This symbol is defined if the C compiler can cast negative - * numbers to unsigned longs, ints and shorts. - */ -/* CASTFLAGS: - * This symbol contains flags that say what difficulties the compiler - * has casting odd floating values to unsigned long: - * 0 = ok - * 1 = couldn't cast < 0 - * 2 = couldn't cast >= 0x80000000 - * 4 = couldn't cast in argument expression list - */ -/*#define CASTNEGFLOAT / **/ -#define CASTFLAGS 0 /**/ - -/* VOID_CLOSEDIR: - * This symbol, if defined, indicates that the closedir() routine - * does not return a value. - */ -/*#define VOID_CLOSEDIR / **/ - -/* HAS_FD_SET: - * This symbol, when defined, indicates presence of the fd_set typedef - * in <sys/types.h> - */ -/*#define HAS_FD_SET / **/ - -/* Gconvert: - * This preprocessor macro is defined to convert a floating point - * number to a string without a trailing decimal point. This - * emulates the behavior of sprintf("%g"), but is sometimes much more - * efficient. If gconvert() is not available, but gcvt() drops the - * trailing decimal point, then gcvt() is used. If all else fails, - * a macro using sprintf("%g") is used. Arguments for the Gconvert - * macro are: value, number of digits, whether trailing zeros should - * be retained, and the output buffer. - * The usual values are: - * d_Gconvert='gconvert((x),(n),(t),(b))' - * d_Gconvert='gcvt((x),(n),(b))' - * d_Gconvert='sprintf((b),"%.*g",(n),(x))' - * The last two assume trailing zeros should not be kept. - */ -#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x)) - -/* HAS_GETPAGESIZE: - * This symbol, if defined, indicates that the getpagesize system call - * is available to get system page size, which is the granularity of - * many memory management calls. - */ -/*#define HAS_GETPAGESIZE / **/ - -/* HAS_GNULIBC: - * This symbol, if defined, indicates to the C program that - * the GNU C library is being used. A better check is to use - * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc. - */ -/*#define HAS_GNULIBC / **/ -#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE) -# define _GNU_SOURCE -#endif - -/* HAS_ISASCII: - * This manifest constant lets the C program know that isascii - * is available. - */ -/*#define HAS_ISASCII / **/ - -/* HAS_LCHOWN: - * This symbol, if defined, indicates that the lchown routine is - * available to operate on a symbolic link (instead of following the - * link). - */ -/*#define HAS_LCHOWN / **/ - -/* HAS_OPEN3: - * This manifest constant lets the C program know that the three - * argument form of open(2) is available. - */ -/*#define HAS_OPEN3 / **/ - -/* HAS_SAFE_BCOPY: - * This symbol, if defined, indicates that the bcopy routine is available - * to copy potentially overlapping memory blocks. Normally, you should - * probably use memmove() or memcpy(). If neither is defined, roll your - * own version. - */ -/*#define HAS_SAFE_BCOPY / **/ - -/* HAS_SAFE_MEMCPY: - * This symbol, if defined, indicates that the memcpy routine is available - * to copy potentially overlapping memory blocks. If you need to - * copy overlapping memory blocks, you should check HAS_MEMMOVE and - * use memmove() instead, if available. - */ -/*#define HAS_SAFE_MEMCPY / **/ - -/* HAS_SANE_MEMCMP: - * This symbol, if defined, indicates that the memcmp routine is available - * and can be used to compare relative magnitudes of chars with their high - * bits set. If it is not defined, roll your own version. - */ -/*#define HAS_SANE_MEMCMP / **/ - -/* HAS_SIGACTION: - * This symbol, if defined, indicates that Vr4's sigaction() routine - * is available. - */ -/*#define HAS_SIGACTION / **/ - -/* HAS_SIGSETJMP: - * This variable indicates to the C program that the sigsetjmp() - * routine is available to save the calling process's registers - * and stack environment for later use by siglongjmp(), and - * to optionally save the process's signal mask. See - * Sigjmp_buf, Sigsetjmp, and Siglongjmp. - */ -/* Sigjmp_buf: - * This is the buffer type to be used with Sigsetjmp and Siglongjmp. - */ -/* Sigsetjmp: - * This macro is used in the same way as sigsetjmp(), but will invoke - * traditional setjmp() if sigsetjmp isn't available. - * See HAS_SIGSETJMP. - */ -/* Siglongjmp: - * This macro is used in the same way as siglongjmp(), but will invoke - * traditional longjmp() if siglongjmp isn't available. - * See HAS_SIGSETJMP. - */ -/*#define HAS_SIGSETJMP / **/ -#ifdef HAS_SIGSETJMP -#define Sigjmp_buf sigjmp_buf -#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) -#define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) -#else -#define Sigjmp_buf jmp_buf -#define Sigsetjmp(buf,save_mask) setjmp((buf)) -#define Siglongjmp(buf,retval) longjmp((buf),(retval)) -#endif - -/* USE_STDIO_PTR: - * This symbol is defined if the _ptr and _cnt fields (or similar) - * of the stdio FILE structure can be used to access the stdio buffer - * for a file handle. If this is defined, then the FILE_ptr(fp) - * and FILE_cnt(fp) macros will also be defined and should be used - * to access these fields. - */ -/* FILE_ptr: - * This macro is used to access the _ptr field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_PTR is defined. - */ -/* STDIO_PTR_LVALUE: - * This symbol is defined if the FILE_ptr macro can be used as an - * lvalue. - */ -/* FILE_cnt: - * This macro is used to access the _cnt field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_PTR is defined. - */ -/* STDIO_CNT_LVALUE: - * This symbol is defined if the FILE_cnt macro can be used as an - * lvalue. - */ -/* STDIO_PTR_LVAL_SETS_CNT: - * This symbol is defined if using the FILE_ptr macro as an lvalue - * to increase the pointer by n has the side effect of decreasing the - * value of File_cnt(fp) by n. - */ -/* STDIO_PTR_LVAL_NOCHANGE_CNT: - * This symbol is defined if using the FILE_ptr macro as an lvalue - * to increase the pointer by n leaves File_cnt(fp) unchanged. - */ -/*#define USE_STDIO_PTR / **/ -#ifdef USE_STDIO_PTR -#define FILE_ptr(fp) ((fp)->_IO_read_ptr) -/*#define STDIO_PTR_LVALUE / **/ -#define FILE_cnt(fp) ((fp)->_IO_read_end - (fp)->_IO_read_ptr) -/*#define STDIO_CNT_LVALUE / **/ -/*#define STDIO_PTR_LVAL_SETS_CNT / **/ -/*#define STDIO_PTR_LVAL_NOCHANGE_CNT / **/ -#endif - -/* USE_STDIO_BASE: - * This symbol is defined if the _base field (or similar) of the - * stdio FILE structure can be used to access the stdio buffer for - * a file handle. If this is defined, then the FILE_base(fp) macro - * will also be defined and should be used to access this field. - * Also, the FILE_bufsiz(fp) macro will be defined and should be used - * to determine the number of bytes in the buffer. USE_STDIO_BASE - * will never be defined unless USE_STDIO_PTR is. - */ -/* FILE_base: - * This macro is used to access the _base field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_BASE is defined. - */ -/* FILE_bufsiz: - * This macro is used to determine the number of bytes in the I/O - * buffer pointed to by _base field (or equivalent) of the FILE - * structure pointed to its argument. This macro will always be defined - * if USE_STDIO_BASE is defined. - */ -/*#define USE_STDIO_BASE / **/ -#ifdef USE_STDIO_BASE -#define FILE_base(fp) ((fp)->_IO_read_base) -#define FILE_bufsiz(fp) ((fp)->_IO_read_end - (fp)->_IO_read_base) -#endif - -/* HAS_VPRINTF: - * This symbol, if defined, indicates that the vprintf routine is available - * to printf with a pointer to an argument list. If unavailable, you - * may need to write your own, probably in terms of _doprnt(). - */ -/* USE_CHAR_VSPRINTF: - * This symbol is defined if this system has vsprintf() returning type - * (char*). The trend seems to be to declare it as "int vsprintf()". It - * is up to the package author to declare vsprintf correctly based on the - * symbol. - */ -#define HAS_VPRINTF /**/ -/*#define USE_CHAR_VSPRINTF / **/ - -/* DOUBLESIZE: - * This symbol contains the size of a double, so that the C preprocessor - * can make decisions based on it. - */ -#define DOUBLESIZE 8 /**/ - -/* I_TIME: - * This symbol, if defined, indicates to the C program that it should - * include <time.h>. - */ -/* I_SYS_TIME: - * This symbol, if defined, indicates to the C program that it should - * include <sys/time.h>. - */ -/* I_SYS_TIME_KERNEL: - * This symbol, if defined, indicates to the C program that it should - * include <sys/time.h> with KERNEL defined. - */ -/* HAS_TM_TM_ZONE: - * This symbol, if defined, indicates to the C program that - * the struct tm has a tm_zone field. - */ -/* HAS_TM_TM_GMTOFF: - * This symbol, if defined, indicates to the C program that - * the struct tm has a tm_gmtoff field. - */ -#define I_TIME /**/ -/*#define I_SYS_TIME / **/ -/*#define I_SYS_TIME_KERNEL / **/ -/*#define HAS_TM_TM_ZONE / **/ -/*#define HAS_TM_TM_GMTOFF / **/ - -/* VAL_O_NONBLOCK: - * This symbol is to be used during open() or fcntl(F_SETFL) to turn on - * non-blocking I/O for the file descriptor. Note that there is no way - * back, i.e. you cannot turn it blocking again this way. If you wish to - * alternatively switch between blocking and non-blocking, use the - * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. - */ -/* VAL_EAGAIN: - * This symbol holds the errno error code set by read() when no data was - * present on the non-blocking file descriptor. - */ -/* RD_NODATA: - * This symbol holds the return code from read() when no data is present - * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is - * not defined, then you can't distinguish between no data and EOF by - * issuing a read(). You'll have to find another way to tell for sure! - */ -/* EOF_NONBLOCK: - * This symbol, if defined, indicates to the C program that a read() on - * a non-blocking file descriptor will return 0 on EOF, and not the value - * held in RD_NODATA (-1 usually, in that case!). - */ -#define VAL_O_NONBLOCK O_NONBLOCK -#define VAL_EAGAIN EAGAIN -#define RD_NODATA -1 -#undef EOF_NONBLOCK - -/* PTRSIZE: - * This symbol contains the size of a pointer, so that the C preprocessor - * can make decisions based on it. It will be sizeof(void *) if - * the compiler supports (void *); otherwise it will be - * sizeof(char *). - */ -#define PTRSIZE 4 /**/ - -/* Drand01: - * This macro is to be used to generate uniformly distributed - * random numbers over the range [0., 1.[. You may have to supply - * an 'extern double drand48();' in your program since SunOS 4.1.3 - * doesn't provide you with anything relevant in its headers. - * See HAS_DRAND48_PROTO. - */ -/* Rand_seed_t: - * This symbol defines the type of the argument of the - * random seed function. - */ -/* seedDrand01: - * This symbol defines the macro to be used in seeding the - * random number generator (see Drand01). - */ -/* RANDBITS: - * This symbol indicates how many bits are produced by the - * function used to generate normalized random numbers. - * Values include 15, 16, 31, and 48. - */ -#define Drand01() ((rand() & 0x7FFF) / (double) ((unsigned long)1 << 15)) /**/ -#define Rand_seed_t int /**/ -#define seedDrand01(x) srand((Rand_seed_t)x) /**/ -#define RANDBITS 48 /**/ - -/* SSize_t: - * This symbol holds the type used by functions that return - * a count of bytes or an error condition. It must be a signed type. - * It is usually ssize_t, but may be long or int, etc. - * It may be necessary to include <sys/types.h> or <unistd.h> - * to get any typedef'ed information. - * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). - */ -#define SSize_t int /* signed count of bytes */ - -/* EBCDIC: - * This symbol, if defined, indicates that this system uses - * EBCDIC encoding. - */ -/*#define EBCDIC / **/ - -/* HAS_ATOLF: - * This symbol, if defined, indicates that the atolf routine is - * available to convert strings into long doubles. - */ -/*#define HAS_ATOLF / **/ - -/* HAS_ATOLL: - * This symbol, if defined, indicates that the atoll routine is - * available to convert strings into long longs. - */ -/*#define HAS_ATOLL / **/ - -/* HAS__FWALK: - * This symbol, if defined, indicates that the _fwalk system call is - * available to apply a function to all the file handles. - */ -/*#define HAS__FWALK / **/ - -/* HAS_AINTL: - * This symbol, if defined, indicates that the aintl routine is - * available. If copysignl is also present we can emulate modfl. - */ -/*#define HAS_AINTL / **/ - -/* HAS_BUILTIN_CHOOSE_EXPR: - * Can we handle GCC builtin for compile-time ternary-like expressions - */ -/* HAS_BUILTIN_EXPECT: - * Can we handle GCC builtin for telling that certain values are more - * likely - */ -/*#define HAS_BUILTIN_EXPECT / **/ -/*#define HAS_BUILTIN_CHOOSE_EXPR / **/ - -/* HAS_C99_VARIADIC_MACROS: - * If defined, the compiler supports C99 variadic macros. - */ -/*#define HAS_C99_VARIADIC_MACROS / **/ - -/* HAS_CLASS: - * This symbol, if defined, indicates that the class routine is - * available to classify doubles. Available for example in AIX. - * The returned values are defined in <float.h> and are: - * - * FP_PLUS_NORM Positive normalized, nonzero - * FP_MINUS_NORM Negative normalized, nonzero - * FP_PLUS_DENORM Positive denormalized, nonzero - * FP_MINUS_DENORM Negative denormalized, nonzero - * FP_PLUS_ZERO +0.0 - * FP_MINUS_ZERO -0.0 - * FP_PLUS_INF +INF - * FP_MINUS_INF -INF - * FP_NANS Signaling Not a Number (NaNS) - * FP_NANQ Quiet Not a Number (NaNQ) - */ -/*#define HAS_CLASS / **/ - -/* HAS_CLEARENV: - * This symbol, if defined, indicates that the clearenv () routine is - * available for use. - */ -/*#define HAS_CLEARENV / **/ - -/* HAS_STRUCT_CMSGHDR: - * This symbol, if defined, indicates that the struct cmsghdr - * is supported. - */ -/*#define HAS_STRUCT_CMSGHDR / **/ - -/* HAS_COPYSIGNL: - * This symbol, if defined, indicates that the copysignl routine is - * available. If aintl is also present we can emulate modfl. - */ -/*#define HAS_COPYSIGNL / **/ - -/* USE_CPLUSPLUS: - * This symbol, if defined, indicates that a C++ compiler was - * used to compiled Perl and will be used to compile extensions. - */ -/*#define USE_CPLUSPLUS / **/ - -/* HAS_DBMINIT_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the dbminit() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern int dbminit(char *); - */ -/*#define HAS_DBMINIT_PROTO / **/ - -/* HAS_DIR_DD_FD: - * This symbol, if defined, indicates that the the DIR* dirstream - * structure contains a member variable named dd_fd. - */ -/*#define HAS_DIR_DD_FD / **/ - -/* HAS_DIRFD: - * This manifest constant lets the C program know that dirfd - * is available. - */ -/*#define HAS_DIRFD / **/ - -/* DLSYM_NEEDS_UNDERSCORE: - * This symbol, if defined, indicates that we need to prepend an - * underscore to the symbol name before calling dlsym(). This only - * makes sense if you *have* dlsym, which we will presume is the - * case if you're using dl_dlopen.xs. - */ -/*#define DLSYM_NEEDS_UNDERSCORE / **/ - -/* HAS_FAST_STDIO: - * This symbol, if defined, indicates that the "fast stdio" - * is available to manipulate the stdio buffers directly. - */ -/*#define HAS_FAST_STDIO / **/ - -/* HAS_FCHDIR: - * This symbol, if defined, indicates that the fchdir routine is - * available to change directory using a file descriptor. - */ -/*#define HAS_FCHDIR / **/ - -/* FCNTL_CAN_LOCK: - * This symbol, if defined, indicates that fcntl() can be used - * for file locking. Normally on Unix systems this is defined. - * It may be undefined on VMS. - */ -/*#define FCNTL_CAN_LOCK / **/ - -/* HAS_FINITE: - * This symbol, if defined, indicates that the finite routine is - * available to check whether a double is finite (non-infinity non-NaN). - */ -/*#define HAS_FINITE / **/ - -/* HAS_FINITEL: - * This symbol, if defined, indicates that the finitel routine is - * available to check whether a long double is finite - * (non-infinity non-NaN). - */ -/*#define HAS_FINITEL / **/ - -/* HAS_FLOCK_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the flock() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern int flock(int, int); - */ -/*#define HAS_FLOCK_PROTO / **/ - -/* HAS_FP_CLASS: - * This symbol, if defined, indicates that the fp_class routine is - * available to classify doubles. Available for example in Digital UNIX. - * The returned values are defined in <math.h> and are: - * - * FP_SNAN Signaling NaN (Not-a-Number) - * FP_QNAN Quiet NaN (Not-a-Number) - * FP_POS_INF +infinity - * FP_NEG_INF -infinity - * FP_POS_NORM Positive normalized - * FP_NEG_NORM Negative normalized - * FP_POS_DENORM Positive denormalized - * FP_NEG_DENORM Negative denormalized - * FP_POS_ZERO +0.0 (positive zero) - * FP_NEG_ZERO -0.0 (negative zero) - */ -/*#define HAS_FP_CLASS / **/ - -/* HAS_FPCLASS: - * This symbol, if defined, indicates that the fpclass routine is - * available to classify doubles. Available for example in Solaris/SVR4. - * The returned values are defined in <ieeefp.h> and are: - * - * FP_SNAN signaling NaN - * FP_QNAN quiet NaN - * FP_NINF negative infinity - * FP_PINF positive infinity - * FP_NDENORM negative denormalized non-zero - * FP_PDENORM positive denormalized non-zero - * FP_NZERO negative zero - * FP_PZERO positive zero - * FP_NNORM negative normalized non-zero - * FP_PNORM positive normalized non-zero - */ -/*#define HAS_FPCLASS / **/ - -/* HAS_FPCLASSIFY: - * This symbol, if defined, indicates that the fpclassify routine is - * available to classify doubles. Available for example in HP-UX. - * The returned values are defined in <math.h> and are - * - * FP_NORMAL Normalized - * FP_ZERO Zero - * FP_INFINITE Infinity - * FP_SUBNORMAL Denormalized - * FP_NAN NaN - * - */ -/*#define HAS_FPCLASSIFY / **/ - -/* HAS_FPCLASSL: - * This symbol, if defined, indicates that the fpclassl routine is - * available to classify long doubles. Available for example in IRIX. - * The returned values are defined in <ieeefp.h> and are: - * - * FP_SNAN signaling NaN - * FP_QNAN quiet NaN - * FP_NINF negative infinity - * FP_PINF positive infinity - * FP_NDENORM negative denormalized non-zero - * FP_PDENORM positive denormalized non-zero - * FP_NZERO negative zero - * FP_PZERO positive zero - * FP_NNORM negative normalized non-zero - * FP_PNORM positive normalized non-zero - */ -/*#define HAS_FPCLASSL / **/ - -/* HAS_FPOS64_T: - * This symbol will be defined if the C compiler supports fpos64_t. - */ -/*#define HAS_FPOS64_T / **/ - -/* HAS_FREXPL: - * This symbol, if defined, indicates that the frexpl routine is - * available to break a long double floating-point number into - * a normalized fraction and an integral power of 2. - */ -/*#define HAS_FREXPL / **/ - -/* HAS_STRUCT_FS_DATA: - * This symbol, if defined, indicates that the struct fs_data - * to do statfs() is supported. - */ -/*#define HAS_STRUCT_FS_DATA / **/ - -/* HAS_FSEEKO: - * This symbol, if defined, indicates that the fseeko routine is - * available to fseek beyond 32 bits (useful for ILP32 hosts). - */ -/*#define HAS_FSEEKO / **/ - -/* HAS_FSTATFS: - * This symbol, if defined, indicates that the fstatfs routine is - * available to stat filesystems by file descriptors. - */ -/*#define HAS_FSTATFS / **/ - -/* HAS_FSYNC: - * This symbol, if defined, indicates that the fsync routine is - * available to write a file's modified data and attributes to - * permanent storage. - */ -/*#define HAS_FSYNC / **/ - -/* HAS_FTELLO: - * This symbol, if defined, indicates that the ftello routine is - * available to ftell beyond 32 bits (useful for ILP32 hosts). - */ -/*#define HAS_FTELLO / **/ - -/* HAS_FUTIMES: - * This symbol, if defined, indicates that the futimes routine is - * available to change file descriptor time stamps with struct timevals. - */ -/*#define HAS_FUTIMES / **/ - -/* HAS_GETCWD: - * This symbol, if defined, indicates that the getcwd routine is - * available to get the current working directory. - */ -/*#define HAS_GETCWD / **/ - -/* HAS_GETESPWNAM: - * This symbol, if defined, indicates that the getespwnam system call is - * available to retrieve enchanced (shadow) password entries by name. - */ -/*#define HAS_GETESPWNAM / **/ - -/* HAS_GETFSSTAT: - * This symbol, if defined, indicates that the getfsstat routine is - * available to stat filesystems in bulk. - */ -/*#define HAS_GETFSSTAT / **/ - -/* HAS_GETITIMER: - * This symbol, if defined, indicates that the getitimer routine is - * available to return interval timers. - */ -/*#define HAS_GETITIMER / **/ - -/* HAS_GETMNT: - * This symbol, if defined, indicates that the getmnt routine is - * available to get filesystem mount info by filename. - */ -/*#define HAS_GETMNT / **/ - -/* HAS_GETMNTENT: - * This symbol, if defined, indicates that the getmntent routine is - * available to iterate through mounted file systems to get their info. - */ -/*#define HAS_GETMNTENT / **/ - -/* HAS_GETPRPWNAM: - * This symbol, if defined, indicates that the getprpwnam system call is - * available to retrieve protected (shadow) password entries by name. - */ -/*#define HAS_GETPRPWNAM / **/ - -/* HAS_GETSPNAM: - * This symbol, if defined, indicates that the getspnam system call is - * available to retrieve SysV shadow password entries by name. - */ -/*#define HAS_GETSPNAM / **/ - -/* HAS_HASMNTOPT: - * This symbol, if defined, indicates that the hasmntopt routine is - * available to query the mount options of file systems. - */ -/*#define HAS_HASMNTOPT / **/ - -/* HAS_ILOGBL: - * This symbol, if defined, indicates that the ilogbl routine is - * available. If scalbnl is also present we can emulate frexpl. - */ -/*#define HAS_ILOGBL / **/ - -/* HAS_INT64_T: - * This symbol will defined if the C compiler supports int64_t. - * Usually the <inttypes.h> needs to be included, but sometimes - * <sys/types.h> is enough. - */ -/*#define HAS_INT64_T / **/ - -/* HAS_ISFINITE: - * This symbol, if defined, indicates that the isfinite routine is - * available to check whether a double is finite (non-infinity non-NaN). - */ -/*#define HAS_ISFINITE / **/ - -/* HAS_ISINF: - * This symbol, if defined, indicates that the isinf routine is - * available to check whether a double is an infinity. - */ -/*#define HAS_ISINF / **/ - -/* HAS_ISNAN: - * This symbol, if defined, indicates that the isnan routine is - * available to check whether a double is a NaN. - */ -/*#define HAS_ISNAN / **/ - -/* HAS_ISNANL: - * This symbol, if defined, indicates that the isnanl routine is - * available to check whether a long double is a NaN. - */ -/*#define HAS_ISNANL / **/ - -/* HAS_LDBL_DIG: - * This symbol, if defined, indicates that this system's <float.h> - * or <limits.h> defines the symbol LDBL_DIG, which is the number - * of significant digits in a long double precision number. Unlike - * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined. - */ -/*#define HAS_LDBL_DIG / * */ - -/* LIBM_LIB_VERSION: - * This symbol, if defined, indicates that libm exports _LIB_VERSION - * and that math.h defines the enum to manipulate it. - */ -/*#define LIBM_LIB_VERSION / **/ - -/* HAS_MADVISE: - * This symbol, if defined, indicates that the madvise system call is - * available to map a file into memory. - */ -/*#define HAS_MADVISE / **/ - -/* HAS_MALLOC_SIZE: - * This symbol, if defined, indicates that the malloc_size - * routine is available for use. - */ -/*#define HAS_MALLOC_SIZE / **/ - -/* HAS_MALLOC_GOOD_SIZE: - * This symbol, if defined, indicates that the malloc_good_size - * routine is available for use. - */ -/*#define HAS_MALLOC_GOOD_SIZE / **/ - -/* HAS_MKDTEMP: - * This symbol, if defined, indicates that the mkdtemp routine is - * available to exclusively create a uniquely named temporary directory. - */ -/*#define HAS_MKDTEMP / **/ - -/* HAS_MKSTEMPS: - * This symbol, if defined, indicates that the mkstemps routine is - * available to excluslvely create and open a uniquely named - * (with a suffix) temporary file. - */ -/*#define HAS_MKSTEMPS / **/ - -/* HAS_MODFL: - * This symbol, if defined, indicates that the modfl routine is - * available to split a long double x into a fractional part f and - * an integer part i such that |f| < 1.0 and (f + i) = x. - */ -/* HAS_MODFL_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the modfl() function. Otherwise, it is up - * to the program to supply one. - */ -/* HAS_MODFL_POW32_BUG: - * This symbol, if defined, indicates that the modfl routine is - * broken for long doubles >= pow(2, 32). - * For example from 4294967303.150000 one would get 4294967302.000000 - * and 1.150000. The bug has been seen in certain versions of glibc, - * release 2.2.2 is known to be okay. - */ -/*#define HAS_MODFL / **/ -/*#define HAS_MODFL_PROTO / **/ -/*#define HAS_MODFL_POW32_BUG / **/ - -/* HAS_MPROTECT: - * This symbol, if defined, indicates that the mprotect system call is - * available to modify the access protection of a memory mapped file. - */ -/*#define HAS_MPROTECT / **/ - -/* HAS_STRUCT_MSGHDR: - * This symbol, if defined, indicates that the struct msghdr - * is supported. - */ -/*#define HAS_STRUCT_MSGHDR / **/ - -/* HAS_NL_LANGINFO: - * This symbol, if defined, indicates that the nl_langinfo routine is - * available to return local data. You will also need <langinfo.h> - * and therefore I_LANGINFO. - */ -/*#define HAS_NL_LANGINFO / **/ - -/* HAS_OFF64_T: - * This symbol will be defined if the C compiler supports off64_t. - */ -/*#define HAS_OFF64_T / **/ - -/* HAS_PROCSELFEXE: - * This symbol is defined if PROCSELFEXE_PATH is a symlink - * to the absolute pathname of the executing program. - */ -/* PROCSELFEXE_PATH: - * If HAS_PROCSELFEXE is defined this symbol is the filename - * of the symbolic link pointing to the absolute pathname of - * the executing program. - */ -/*#define HAS_PROCSELFEXE / **/ -#if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH) -#define PROCSELFEXE_PATH /**/ -#endif - -/* HAS_PTHREAD_ATTR_SETSCOPE: - * This symbol, if defined, indicates that the pthread_attr_setscope - * system call is available to set the contention scope attribute of - * a thread attribute object. - */ -/*#define HAS_PTHREAD_ATTR_SETSCOPE / **/ - -/* HAS_READV: - * This symbol, if defined, indicates that the readv routine is - * available to do gather reads. You will also need <sys/uio.h> - * and there I_SYSUIO. - */ -/*#define HAS_READV / **/ - -/* HAS_RECVMSG: - * This symbol, if defined, indicates that the recvmsg routine is - * available to send structured socket messages. - */ -/*#define HAS_RECVMSG / **/ - -/* HAS_SBRK_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the sbrk() function. Otherwise, it is up - * to the program to supply one. Good guesses are - * extern void* sbrk(int); - * extern void* sbrk(size_t); - */ -/*#define HAS_SBRK_PROTO / **/ - -/* HAS_SCALBNL: - * This symbol, if defined, indicates that the scalbnl routine is - * available. If ilogbl is also present we can emulate frexpl. - */ -/*#define HAS_SCALBNL / **/ - -/* HAS_SENDMSG: - * This symbol, if defined, indicates that the sendmsg routine is - * available to send structured socket messages. - */ -/*#define HAS_SENDMSG / **/ - -/* HAS_SETITIMER: - * This symbol, if defined, indicates that the setitimer routine is - * available to set interval timers. - */ -/*#define HAS_SETITIMER / **/ - -/* HAS_SETPROCTITLE: - * This symbol, if defined, indicates that the setproctitle routine is - * available to set process title. - */ -/*#define HAS_SETPROCTITLE / **/ - -/* USE_SFIO: - * This symbol, if defined, indicates that sfio should - * be used. - */ -/*#define USE_SFIO / **/ - -/* HAS_SIGNBIT: - * This symbol, if defined, indicates that the signbit routine is - * available to check if the given number has the sign bit set. - * This should include correct testing of -0.0. This will only be set - * if the signbit() routine is safe to use with the NV type used internally - * in perl. Users should call Perl_signbit(), which will be #defined to - * the system's signbit() function or macro if this symbol is defined. - */ -/*#define HAS_SIGNBIT / **/ - -/* HAS_SIGPROCMASK: - * This symbol, if defined, indicates that the sigprocmask - * system call is available to examine or change the signal mask - * of the calling process. - */ -/*#define HAS_SIGPROCMASK / **/ - -/* USE_SITECUSTOMIZE: - * This symbol, if defined, indicates that sitecustomize should - * be used. - */ -#ifndef USE_SITECUSTOMIZE -/*#define USE_SITECUSTOMIZE / **/ -#endif - -/* HAS_SNPRINTF: - * This symbol, if defined, indicates that the snprintf () library - * function is available for use. - */ -/* HAS_VSNPRINTF: - * This symbol, if defined, indicates that the vsnprintf () library - * function is available for use. - */ -/*#define HAS_SNPRINTF / **/ -/*#define HAS_VSNPRINTF / **/ - -/* HAS_SOCKATMARK: - * This symbol, if defined, indicates that the sockatmark routine is - * available to test whether a socket is at the out-of-band mark. - */ -/*#define HAS_SOCKATMARK / **/ - -/* HAS_SOCKATMARK_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the sockatmark() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern int sockatmark(int); - */ -/*#define HAS_SOCKATMARK_PROTO / **/ - -/* HAS_SOCKS5_INIT: - * This symbol, if defined, indicates that the socks5_init routine is - * available to initialize SOCKS 5. - */ -/*#define HAS_SOCKS5_INIT / **/ - -/* SPRINTF_RETURNS_STRLEN: - * This variable defines whether sprintf returns the length of the string - * (as per the ANSI spec). Some C libraries retain compatibility with - * pre-ANSI C and return a pointer to the passed in buffer; for these - * this variable will be undef. - */ -/*#define SPRINTF_RETURNS_STRLEN / **/ - -/* HAS_SQRTL: - * This symbol, if defined, indicates that the sqrtl routine is - * available to do long double square roots. - */ -/*#define HAS_SQRTL / **/ - -/* HAS_SETRESGID_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the setresgid() function. Otherwise, it is up - * to the program to supply one. Good guesses are - * extern int setresgid(uid_t ruid, uid_t euid, uid_t suid); - */ -/*#define HAS_SETRESGID_PROTO / **/ - -/* HAS_SETRESUID_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the setresuid() function. Otherwise, it is up - * to the program to supply one. Good guesses are - * extern int setresuid(uid_t ruid, uid_t euid, uid_t suid); - */ -/*#define HAS_SETRESUID_PROTO / **/ - -/* HAS_STRUCT_STATFS_F_FLAGS: - * This symbol, if defined, indicates that the struct statfs - * does have the f_flags member containing the mount flags of - * the filesystem containing the file. - * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3), - * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not - * have statfs() and struct statfs, they have ustat() and getmnt() - * with struct ustat and struct fs_data. - */ -/*#define HAS_STRUCT_STATFS_F_FLAGS / **/ - -/* HAS_STRUCT_STATFS: - * This symbol, if defined, indicates that the struct statfs - * to do statfs() is supported. - */ -/*#define HAS_STRUCT_STATFS / **/ - -/* HAS_FSTATVFS: - * This symbol, if defined, indicates that the fstatvfs routine is - * available to stat filesystems by file descriptors. - */ -/*#define HAS_FSTATVFS / **/ - -/* HAS_STRFTIME: - * This symbol, if defined, indicates that the strftime routine is - * available to do time formatting. - */ -/*#define HAS_STRFTIME / **/ - -/* HAS_STRLCAT: - * This symbol, if defined, indicates that the strlcat () routine is - * available to do string concatenation. - */ -/*#define HAS_STRLCAT / **/ - -/* HAS_STRLCPY: - * This symbol, if defined, indicates that the strlcpy () routine is - * available to do string copying. - */ -/*#define HAS_STRLCPY / **/ - -/* HAS_STRTOLD: - * This symbol, if defined, indicates that the strtold routine is - * available to convert strings to long doubles. - */ -/*#define HAS_STRTOLD / **/ - -/* HAS_STRTOLL: - * This symbol, if defined, indicates that the strtoll routine is - * available to convert strings to long longs. - */ -/*#define HAS_STRTOLL / **/ - -/* HAS_STRTOQ: - * This symbol, if defined, indicates that the strtoq routine is - * available to convert strings to long longs (quads). - */ -/*#define HAS_STRTOQ / **/ - -/* HAS_STRTOULL: - * This symbol, if defined, indicates that the strtoull routine is - * available to convert strings to unsigned long longs. - */ -/*#define HAS_STRTOULL / **/ - -/* HAS_STRTOUQ: - * This symbol, if defined, indicates that the strtouq routine is - * available to convert strings to unsigned long longs (quads). - */ -/*#define HAS_STRTOUQ / **/ - -/* HAS_SYSCALL_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the syscall() function. Otherwise, it is up - * to the program to supply one. Good guesses are - * extern int syscall(int, ...); - * extern int syscall(long, ...); - */ -/*#define HAS_SYSCALL_PROTO / **/ - -/* HAS_TELLDIR_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the telldir() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern long telldir(DIR*); - */ -/*#define HAS_TELLDIR_PROTO / **/ - -/* U32_ALIGNMENT_REQUIRED: - * This symbol, if defined, indicates that you must access - * character data through U32-aligned pointers. - */ -#ifndef U32_ALIGNMENT_REQUIRED -#define U32_ALIGNMENT_REQUIRED /**/ -#endif - -/* HAS_UALARM: - * This symbol, if defined, indicates that the ualarm routine is - * available to do alarms with microsecond granularity. - */ -/*#define HAS_UALARM / **/ - -/* HAS_UNORDERED: - * This symbol, if defined, indicates that the unordered routine is - * available to check whether two doubles are unordered - * (effectively: whether either of them is NaN) - */ -/*#define HAS_UNORDERED / **/ - -/* HAS_UNSETENV: - * This symbol, if defined, indicates that the unsetenv () routine is - * available for use. - */ -/*#define HAS_UNSETENV / **/ - -/* HAS_USLEEP_PROTO: - * This symbol, if defined, indicates that the system provides - * a prototype for the usleep() function. Otherwise, it is up - * to the program to supply one. A good guess is - * extern int usleep(useconds_t); - */ -/*#define HAS_USLEEP_PROTO / **/ - -/* HAS_USTAT: - * This symbol, if defined, indicates that the ustat system call is - * available to query file system statistics by dev_t. - */ -/*#define HAS_USTAT / **/ - -/* HAS_WRITEV: - * This symbol, if defined, indicates that the writev routine is - * available to do scatter writes. - */ -/*#define HAS_WRITEV / **/ - -/* USE_DYNAMIC_LOADING: - * This symbol, if defined, indicates that dynamic loading of - * some sort is available. - */ -/*#define USE_DYNAMIC_LOADING / **/ - -/* FFLUSH_NULL: - * This symbol, if defined, tells that fflush(NULL) does flush - * all pending stdio output. - */ -/* FFLUSH_ALL: - * This symbol, if defined, tells that to flush - * all pending stdio output one must loop through all - * the stdio file handles stored in an array and fflush them. - * Note that if fflushNULL is defined, fflushall will not - * even be probed for and will be left undefined. - */ -/*#define FFLUSH_NULL / **/ -/*#define FFLUSH_ALL / **/ - -/* I_ASSERT: - * This symbol, if defined, indicates that <assert.h> exists and - * could be included by the C program to get the assert() macro. - */ -#define I_ASSERT /**/ - -/* I_CRYPT: - * This symbol, if defined, indicates that <crypt.h> exists and - * should be included. - */ -/*#define I_CRYPT / **/ - -/* DB_Prefix_t: - * This symbol contains the type of the prefix structure element - * in the <db.h> header file. In older versions of DB, it was - * int, while in newer ones it is u_int32_t. - */ -/* DB_Hash_t: - * This symbol contains the type of the prefix structure element - * in the <db.h> header file. In older versions of DB, it was - * int, while in newer ones it is size_t. - */ -/* DB_VERSION_MAJOR_CFG: - * This symbol, if defined, defines the major version number of - * Berkeley DB found in the <db.h> header when Perl was configured. - */ -/* DB_VERSION_MINOR_CFG: - * This symbol, if defined, defines the minor version number of - * Berkeley DB found in the <db.h> header when Perl was configured. - * For DB version 1 this is always 0. - */ -/* DB_VERSION_PATCH_CFG: - * This symbol, if defined, defines the patch version number of - * Berkeley DB found in the <db.h> header when Perl was configured. - * For DB version 1 this is always 0. - */ -#define DB_Hash_t u_int32_t /**/ -#define DB_Prefix_t size_t /**/ -#define DB_VERSION_MAJOR_CFG 0 /**/ -#define DB_VERSION_MINOR_CFG 0 /**/ -#define DB_VERSION_PATCH_CFG 0 /**/ - -/* I_FP: - * This symbol, if defined, indicates that <fp.h> exists and - * should be included. - */ -/*#define I_FP / **/ - -/* I_FP_CLASS: - * This symbol, if defined, indicates that <fp_class.h> exists and - * should be included. - */ -/*#define I_FP_CLASS / **/ - -/* I_IEEEFP: - * This symbol, if defined, indicates that <ieeefp.h> exists and - * should be included. - */ -/*#define I_IEEEFP / **/ - -/* I_INTTYPES: - * This symbol, if defined, indicates to the C program that it should - * include <inttypes.h>. - */ -/*#define I_INTTYPES / **/ - -/* I_LANGINFO: - * This symbol, if defined, indicates that <langinfo.h> exists and - * should be included. - */ -/*#define I_LANGINFO / **/ - -/* I_LIBUTIL: - * This symbol, if defined, indicates that <libutil.h> exists and - * should be included. - */ -/*#define I_LIBUTIL / **/ - -/* I_MNTENT: - * This symbol, if defined, indicates that <mntent.h> exists and - * should be included. - */ -/*#define I_MNTENT / **/ - -/* I_NETINET_TCP: - * This symbol, if defined, indicates to the C program that it should - * include <netinet/tcp.h>. - */ -/*#define I_NETINET_TCP / **/ - -/* I_POLL: - * This symbol, if defined, indicates that <poll.h> exists and - * should be included. (see also HAS_POLL) - */ -/*#define I_POLL / **/ - -/* I_PROT: - * This symbol, if defined, indicates that <prot.h> exists and - * should be included. - */ -/*#define I_PROT / **/ - -/* I_SHADOW: - * This symbol, if defined, indicates that <shadow.h> exists and - * should be included. - */ -/*#define I_SHADOW / **/ - -/* I_SOCKS: - * This symbol, if defined, indicates that <socks.h> exists and - * should be included. - */ -/*#define I_SOCKS / **/ - -/* I_SUNMATH: - * This symbol, if defined, indicates that <sunmath.h> exists and - * should be included. - */ -/*#define I_SUNMATH / **/ - -/* I_SYSLOG: - * This symbol, if defined, indicates that <syslog.h> exists and - * should be included. - */ -/*#define I_SYSLOG / **/ - -/* I_SYSMODE: - * This symbol, if defined, indicates that <sys/mode.h> exists and - * should be included. - */ -/*#define I_SYSMODE / **/ - -/* I_SYS_MOUNT: - * This symbol, if defined, indicates that <sys/mount.h> exists and - * should be included. - */ -/*#define I_SYS_MOUNT / **/ - -/* I_SYS_STATFS: - * This symbol, if defined, indicates that <sys/statfs.h> exists. - */ -/*#define I_SYS_STATFS / **/ - -/* I_SYS_STATVFS: - * This symbol, if defined, indicates that <sys/statvfs.h> exists and - * should be included. - */ -/*#define I_SYS_STATVFS / **/ - -/* I_SYSUTSNAME: - * This symbol, if defined, indicates that <sys/utsname.h> exists and - * should be included. - */ -/*#define I_SYSUTSNAME / **/ - -/* I_SYS_VFS: - * This symbol, if defined, indicates that <sys/vfs.h> exists and - * should be included. - */ -/*#define I_SYS_VFS / **/ - -/* I_USTAT: - * This symbol, if defined, indicates that <ustat.h> exists and - * should be included. - */ -/*#define I_USTAT / **/ - -/* PERL_PRIfldbl: - * This symbol, if defined, contains the string used by stdio to - * format long doubles (format 'f') for output. - */ -/* PERL_PRIgldbl: - * This symbol, if defined, contains the string used by stdio to - * format long doubles (format 'g') for output. - */ -/* PERL_PRIeldbl: - * This symbol, if defined, contains the string used by stdio to - * format long doubles (format 'e') for output. - */ -/* PERL_SCNfldbl: - * This symbol, if defined, contains the string used by stdio to - * format long doubles (format 'f') for input. - */ -/*#define PERL_PRIfldbl "llf" / **/ -/*#define PERL_PRIgldbl "llg" / **/ -/*#define PERL_PRIeldbl "lle" / **/ -/*#define PERL_SCNfldbl "llf" / **/ - -/* PERL_MAD: - * This symbol, if defined, indicates that the Misc Attribution - * Declaration code should be conditionally compiled. - */ -/*#define PERL_MAD / **/ - -/* NEED_VA_COPY: - * This symbol, if defined, indicates that the system stores - * the variable argument list datatype, va_list, in a format - * that cannot be copied by simple assignment, so that some - * other means must be used when copying is required. - * As such systems vary in their provision (or non-provision) - * of copying mechanisms, handy.h defines a platform- - * independent macro, Perl_va_copy(src, dst), to do the job. - */ -/*#define NEED_VA_COPY / **/ - -/* IVTYPE: - * This symbol defines the C type used for Perl's IV. - */ -/* UVTYPE: - * This symbol defines the C type used for Perl's UV. - */ -/* I8TYPE: - * This symbol defines the C type used for Perl's I8. - */ -/* U8TYPE: - * This symbol defines the C type used for Perl's U8. - */ -/* I16TYPE: - * This symbol defines the C type used for Perl's I16. - */ -/* U16TYPE: - * This symbol defines the C type used for Perl's U16. - */ -/* I32TYPE: - * This symbol defines the C type used for Perl's I32. - */ -/* U32TYPE: - * This symbol defines the C type used for Perl's U32. - */ -/* I64TYPE: - * This symbol defines the C type used for Perl's I64. - */ -/* U64TYPE: - * This symbol defines the C type used for Perl's U64. - */ -/* NVTYPE: - * This symbol defines the C type used for Perl's NV. - */ -/* IVSIZE: - * This symbol contains the sizeof(IV). - */ -/* UVSIZE: - * This symbol contains the sizeof(UV). - */ -/* I8SIZE: - * This symbol contains the sizeof(I8). - */ -/* U8SIZE: - * This symbol contains the sizeof(U8). - */ -/* I16SIZE: - * This symbol contains the sizeof(I16). - */ -/* U16SIZE: - * This symbol contains the sizeof(U16). - */ -/* I32SIZE: - * This symbol contains the sizeof(I32). - */ -/* U32SIZE: - * This symbol contains the sizeof(U32). - */ -/* I64SIZE: - * This symbol contains the sizeof(I64). - */ -/* U64SIZE: - * This symbol contains the sizeof(U64). - */ -/* NVSIZE: - * This symbol contains the sizeof(NV). - */ -/* NV_PRESERVES_UV: - * This symbol, if defined, indicates that a variable of type NVTYPE - * can preserve all the bits of a variable of type UVTYPE. - */ -/* NV_PRESERVES_UV_BITS: - * This symbol contains the number of bits a variable of type NVTYPE - * can preserve of a variable of type UVTYPE. - */ -/* NV_OVERFLOWS_INTEGERS_AT - * This symbol gives the largest integer value that NVs can hold. This - * value + 1.0 cannot be stored accurately. It is expressed as constant - * floating point expression to reduce the chance of decimale/binary - * conversion issues. If it can not be determined, the value 0 is given. - */ -/* NV_ZERO_IS_ALLBITS_ZERO: - * This symbol, if defined, indicates that a variable of type NVTYPE - * stores 0.0 in memory as all bits zero. - */ -#define IVTYPE long /**/ -#define UVTYPE unsigned long /**/ -#define I8TYPE char /**/ -#define U8TYPE unsigned char /**/ -#define I16TYPE short /**/ -#define U16TYPE unsigned short /**/ -#define I32TYPE long /**/ -#define U32TYPE unsigned long /**/ -#ifdef HAS_QUAD -#define I64TYPE int64_t /**/ -#define U64TYPE uint64_t /**/ -#endif -#define NVTYPE double /**/ -#define IVSIZE 4 /**/ -#define UVSIZE 4 /**/ -#define I8SIZE 1 /**/ -#define U8SIZE 1 /**/ -#define I16SIZE 2 /**/ -#define U16SIZE 2 /**/ -#define I32SIZE 4 /**/ -#define U32SIZE 4 /**/ -#ifdef HAS_QUAD -#define I64SIZE 8 /**/ -#define U64SIZE 8 /**/ -#endif -#define NVSIZE 8 /**/ -#undef NV_PRESERVES_UV -#define NV_PRESERVES_UV_BITS 0 -#define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0 -#undef NV_ZERO_IS_ALLBITS_ZERO -#if UVSIZE == 8 -# ifdef BYTEORDER -# if BYTEORDER == 0x1234 -# undef BYTEORDER -# define BYTEORDER 0x12345678 -# else -# if BYTEORDER == 0x4321 -# undef BYTEORDER -# define BYTEORDER 0x87654321 -# endif -# endif -# endif -#endif - -/* IVdf: - * This symbol defines the format string used for printing a Perl IV - * as a signed decimal integer. - */ -/* UVuf: - * This symbol defines the format string used for printing a Perl UV - * as an unsigned decimal integer. - */ -/* UVof: - * This symbol defines the format string used for printing a Perl UV - * as an unsigned octal integer. - */ -/* UVxf: - * This symbol defines the format string used for printing a Perl UV - * as an unsigned hexadecimal integer in lowercase abcdef. - */ -/* UVXf: - * This symbol defines the format string used for printing a Perl UV - * as an unsigned hexadecimal integer in uppercase ABCDEF. - */ -/* NVef: - * This symbol defines the format string used for printing a Perl NV - * using %e-ish floating point format. - */ -/* NVff: - * This symbol defines the format string used for printing a Perl NV - * using %f-ish floating point format. - */ -/* NVgf: - * This symbol defines the format string used for printing a Perl NV - * using %g-ish floating point format. - */ -#define IVdf "ld" /**/ -#define UVuf "lu" /**/ -#define UVof "lo" /**/ -#define UVxf "lx" /**/ -#define UVXf "lX" /**/ -#define NVef "e" /**/ -#define NVff "f" /**/ -#define NVgf "g" /**/ - -/* SELECT_MIN_BITS: - * This symbol holds the minimum number of bits operated by select. - * That is, if you do select(n, ...), how many bits at least will be - * cleared in the masks if some activity is detected. Usually this - * is either n or 32*ceil(n/32), especially many little-endians do - * the latter. This is only useful if you have select(), naturally. - */ -#define SELECT_MIN_BITS 32 /**/ - -/* STARTPERL: - * This variable contains the string to put in front of a perl - * script to make sure (one hopes) that it runs with perl and not - * some shell. - */ -#define STARTPERL "#!perl" /**/ - -/* HAS_STDIO_STREAM_ARRAY: - * This symbol, if defined, tells that there is an array - * holding the stdio streams. - */ -/* STDIO_STREAM_ARRAY: - * This symbol tells the name of the array holding the stdio streams. - * Usual values include _iob, __iob, and __sF. - */ -/*#define HAS_STDIO_STREAM_ARRAY / **/ -#define STDIO_STREAM_ARRAY - -/* USE_64_BIT_INT: - * This symbol, if defined, indicates that 64-bit integers should - * be used when available. If not defined, the native integers - * will be employed (be they 32 or 64 bits). The minimal possible - * 64-bitness is used, just enough to get 64-bit integers into Perl. - * This may mean using for example "long longs", while your memory - * may still be limited to 2 gigabytes. - */ -/* USE_64_BIT_ALL: - * This symbol, if defined, indicates that 64-bit integers should - * be used when available. If not defined, the native integers - * will be used (be they 32 or 64 bits). The maximal possible - * 64-bitness is employed: LP64 or ILP64, meaning that you will - * be able to use more than 2 gigabytes of memory. This mode is - * even more binary incompatible than USE_64_BIT_INT. You may not - * be able to run the resulting executable in a 32-bit CPU at all or - * you may need at least to reboot your OS to 64-bit mode. - */ -#ifndef USE_64_BIT_INT -/*#define USE_64_BIT_INT / **/ -#endif -#ifndef USE_64_BIT_ALL -/*#define USE_64_BIT_ALL / **/ -#endif - -/* USE_DTRACE: - * This symbol, if defined, indicates that Perl should - * be built with support for DTrace. - */ -/*#define USE_DTRACE / **/ - -/* USE_FAST_STDIO: - * This symbol, if defined, indicates that Perl should - * be built to use 'fast stdio'. - * Defaults to define in Perls 5.8 and earlier, to undef later. - */ -#ifndef USE_FAST_STDIO -/*#define USE_FAST_STDIO / **/ -#endif - -/* USE_LARGE_FILES: - * This symbol, if defined, indicates that large file support - * should be used when available. - */ -#ifndef USE_LARGE_FILES -/*#define USE_LARGE_FILES / **/ -#endif - -/* USE_LONG_DOUBLE: - * This symbol, if defined, indicates that long doubles should - * be used when available. - */ -#ifndef USE_LONG_DOUBLE -/*#define USE_LONG_DOUBLE / **/ -#endif - -/* USE_MORE_BITS: - * This symbol, if defined, indicates that 64-bit interfaces and - * long doubles should be used when available. - */ -#ifndef USE_MORE_BITS -/*#define USE_MORE_BITS / **/ -#endif - -/* MULTIPLICITY: - * This symbol, if defined, indicates that Perl should - * be built to use multiplicity. - */ -#ifndef MULTIPLICITY -/*#define MULTIPLICITY / **/ -#endif - -/* USE_PERLIO: - * This symbol, if defined, indicates that the PerlIO abstraction should - * be used throughout. If not defined, stdio should be - * used in a fully backward compatible manner. - */ -#ifndef USE_PERLIO -/*#define USE_PERLIO / **/ -#endif - -/* USE_SOCKS: - * This symbol, if defined, indicates that Perl should - * be built to use socks. - */ -#ifndef USE_SOCKS -/*#define USE_SOCKS / **/ -#endif - -#endif |