From 44da72df86e5c65eb8babf4f8e2f738591df78a3 Mon Sep 17 00:00:00 2001 From: Kai Koehne Date: Tue, 19 Sep 2017 14:59:15 +0200 Subject: Rename webengineview.qdoc to webengineview_lgpl.qdoc Follow the example of the webenginewidgets documentation and rename webengineview.qdoc to make it obvious it contains lgpl only content. Task-number: QTBUG-60006 Change-Id: I2ab60ba9f8c5185edabe1404b09dc894bb3de6f3 Reviewed-by: Allan Sandfeld Jensen --- src/webengine/doc/src/webengineview_lgpl.qdoc | 1254 +++++++++++++++++++++++++ 1 file changed, 1254 insertions(+) create mode 100644 src/webengine/doc/src/webengineview_lgpl.qdoc (limited to 'src/webengine/doc/src/webengineview_lgpl.qdoc') diff --git a/src/webengine/doc/src/webengineview_lgpl.qdoc b/src/webengine/doc/src/webengineview_lgpl.qdoc new file mode 100644 index 000000000..27c3d6920 --- /dev/null +++ b/src/webengine/doc/src/webengineview_lgpl.qdoc @@ -0,0 +1,1254 @@ +/* + * Copyright (C) 2015 The Qt Company Ltd. + * Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies) + * Copyright (c) 2012 Hewlett-Packard Development Company, L.P. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Library General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Library General Public License for more details. + * + * You should have received a copy of the GNU Library General Public License + * along with this program; see the file COPYING.LIB. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +// The documentation in this file was imported from QtWebKit and is thus constrained +// by its LGPL license. + +/*! + \qmltype WebEngineView + \instantiates QQuickWebEngineView + \inherits Item + \inqmlmodule QtWebEngine + \since QtWebEngine 1.0 + \brief A WebEngineView renders web content within a QML application. + + The WebEngineView type enables QML applications to render regions of dynamic web content. It + may share the screen with other QML types, such as a TabView, or fill the screen, as specified + within the QML application. + + \section2 Initializing Web Engine + + For the web engine view to be rendered, the web engine must be initialized by using + \l QtWebEngine::initialize in the application main source file, as illustrated by the + following code snippet: + + \quotefromfile webengine/minimal/main.cpp + \skipto main + \printuntil } + + \section2 Loading Web Pages + + An application can load pages into the WebEngineView, using either the \l url property or the + \l loadHtml method and navigate within the view's session history. The GET + method is always used to load URLs. + + The history is represented by a WebEngineHistory data model that is held by + the \l navigationHistory property. + + The following sample QML application loads a web page using the \c url property: + + \quotefromfile webengine/minimal/main.qml + \skipto import + \printuntil /^\}/ + + The \l loading property holds whether an HTML page is currently loading. + The \l loadingChanged() signal is emitted when loading the page begins, ends, or fails. + + The title of an HTML page can be accessed with the \l title property. Additionally, a web + page may specify an icon, which can be accessed using the \l icon property. The \l zoomFactor + property enables zooming the contents of the web page by a scale factor. + + If a certificate error is raised while loading a web page, the \l certificateError() signal is + emitted. Certificate errors are handled by using the methods of the WebEngineCertificateError + type. + + \section2 Interaction + + By default, links to different pages load within the same WebEngineView object, but web sites + may request them to be opened as a new tab, window, or dialog. The \l newViewRequested() signal + is emitted when a request to load the page in a separate web engine view is issued. The + NewViewDestination property describes how the new view should be opened. In addition, the + WebEngineNewViewRequest utility type can be used to load web pages in separate web engine views. + + The \l findText() method can be used to search for a string on a web page, using the options + described by \l FindFlags. + + The \l setActiveFocusOnPress() method can be used to create a UI element that should not get + focus on press. This can be useful in a hybrid UI. + + The \l {WebEngineSettings::focusOnNavigationEnabled} {focusOnNavigationEnabled} setting can be + used to stop the view from automatically receiving focus when a navigation operation occurs + (like loading or reloading a page or navigating through history). + + The \l linkHovered() signal is emitted when a mouse pointer passes over a link and thus + corresponds to the \c{mouseover} DOM event. + + Actions, such as selecting and editing content, can be performed on a web page by using the + \l triggerWebAction() method. The available actions are described by the \l WebAction property. + + The \l backgroundColorChanged() signal is emitted when the web page background color changes. + + \section2 User Scripts + + During the loading of a page, so called \e {user scripts} can be injected in the JavaScript + engine at different points. The script objects attached to the web engine view are held by the + \l userScripts property and injected by using the WebEngineScript type. Scripts can also be run + by using the runJavaScript() method in the same world as other scripts that are part of the + loaded site. + + The \l webChannel property can be used to expose a WebChannel instance in the JavaScript context + of the page it is rendering as \c qt.webChannelTransport. + + \section2 Fullscreen Mode + + A web page can request through the JavaScript API to be loaded in fullscreen mode. The + \l fullScreenRequested() signal is emitted when the web page issues the request. The + WebEngineFullScreenRequest utility type can be used to toggle fullscreen requests. The + \l fullScreenCancelled method can be used to notify the browser engine when the windowing + system forces the application to leave fullscreen mode. + + \section2 Profiles + + Web engine views can be isolated from each other by using the WebEngineProfile type. A profile + contains settings, scripts, and the list of visited links shared by all views that belong to the + profile. For example, a dedicated profile could be created for a \e {private browsing} mode. The + current profile for the view is held by the \l profile property and the current settings are + held by the \l settings property. The settings are specified by using the WebEngineSettings + type. + + \section2 Platform Features + + Web pages can request access to platform features, such as geolocation or audio and video + capture devices. The \l featurePermissionRequested() signal is emitted when a web page requests + to make use of a resource. The supported platform features are described by the \l Feature + property. If users grant the permission, the \l grantFeaturePermission() method is used to set + it to \e granted. + + \section2 Rendering to OpenGL Surface + + When using a QQuickRenderControl to render a Qt Quick user interface to an OpenGL surface, the + WebEngineView type is not rendered correctly. The web engine view attempts to use a global + OpenGL context created by \l QtWebEngine::initialize, but there is no public API for accessing + that context in order to share it with the \c QQuickRenderControl context. + + To have the web engine view rendered correctly, it is possible to manually create a new + offscreen context that is shared with the \c QQuickRenderControl and to call the non-public + function \c qt_gl_set_global_share_context(), rather than calling \c initialize(). + If \c initialize() is called after setting a global context, it will do nothing. +*/ + +/*! + \qmlmethod void WebEngineView::goBack() + + Go backward within the browser's session history, if possible. + This function is equivalent to the \c{window.history.back()} DOM method. + + \sa canGoBack +*/ + +/*! + \qmlmethod void WebEngineView::goForward() + + Go forward within the browser's session history, if possible. + This function is equivalent to the \c{window.history.forward()} DOM method. +*/ + +/*! + \qmlmethod void WebEngineView::goBackOrForward(int offset) + \since QtWebEngine 1.1 + + If \a offset is positive, goes forward the specified number of offset + pages in the current session history. If offset is negative, it goes + back. If the offset is invalid, the page is not changed. + + \sa goBack(), goForward() +*/ + +/*! + \qmlmethod void WebEngineView::stop() + + Stops loading the current page. +*/ + +/*! + \qmlmethod void WebEngineView::reload() + + Reloads the current page. This function is equivalent to the + \c{window.location.reload()} DOM method. + + \sa reloadAndBypassCache() +*/ + +/*! + \qmlmethod void WebEngineView::reloadAndBypassCache() + \since QtWebEngine 1.1 + + Reloads the current page, ignoring any cached content. + + \sa reload() +*/ + +/*! + \qmlproperty url WebEngineView::url + + The location of the currently displayed HTML page. This writable + property offers the main interface to load a page into a web view. + It functions the same as the \c{window.location} DOM property. + + \sa loadHtml() +*/ + +/*! + \qmlproperty url WebEngineView::icon + \readonly + + An internal URL for accessing the currently displayed web site icon, + also known as favicon or shortcut icon. The icon is already downloaded + and stored by the Qt WebEngine's favicon manager. + This read-only URL corresponds to the image used within a mobile browser + application to represent a bookmarked page on the device's home screen. + + The following snippet uses the \c{icon} property to build an \c{Image} + component: + + \qml + Image { + id: appIcon + sourceSize: Qt.size(32, 32) + source: webView.icon != "" ? webView.icon : "fallbackFavicon.png"; + // ... + } + \endqml + + Specifying the \c{sourceSize} property of the \c{Image} element informs + the Qt WebEngine's favicon provider about the requested size. The + favicon provider tries to find the best fit among the web page candidate + icons. If \c{sourceSize} property is not specified, the provider provides + the icon with the largest resolution. +*/ + +/*! + \qmlproperty int WebEngineView::loadProgress + \readonly + + The amount of data from the page that has been loaded, expressed + as an integer percentage in the range from \c{0} to \c{100}. +*/ + +/*! + \qmlproperty bool WebEngineView::canGoBack + \readonly + + Returns \c{true} if there are prior session history entries, \c{false} + otherwise. +*/ + +/*! + \qmlproperty bool WebEngineView::canGoForward + \readonly + + Returns \c{true} if there are subsequent session history entries, + \c{false} otherwise. +*/ + +/*! + \qmlproperty bool WebEngineView::loading + \readonly + + Returns \c{true} if the HTML page is currently loading, \c{false} otherwise. +*/ + +/*! + \qmlproperty string WebEngineView::title + \readonly + + The title of the currently displayed HTML page. This is a + read-only value that reflects the contents of the \c{} tag. +*/ + +/*! + \qmlproperty bool WebEngineView::isFullScreen + \since QtWebEngine 1.1 + \readonly + + Returns \c{true} if the web view is in fullscreen mode, \c{false} otherwise. + + \sa fullScreenRequested(), fullScreenCancelled() +*/ + +/*! + \qmlproperty WebEngineHistory WebEngineView::navigationHistory + \since QtWebEngine 1.1 + \readonly + + The navigation history of the current view. + + \sa WebEngineHistory +*/ + +/*! + \qmlproperty QQmlWebChannel WebEngineView::webChannel + \since QtWebEngine 1.1 + + The web channel instance used by this view. + This channel is automatically using the internal QtWebEngine transport mechanism over Chromium IPC, + and exposed in the javascript context of the page it is rendering as \c qt.webChannelTransport. + This transport object is used when instantiating the JavaScript counterpart of QWebChannel using + the \l{Qt WebChannel JavaScript API}. + + \note The view does not take ownership for an assigned webChannel object. +*/ + +/*! + \qmlproperty WebEngineProfile WebEngineView::profile + \since QtWebEngine 1.1 + + The current profile used for the view. + + \sa WebEngineProfile +*/ + +/*! + \qmlproperty WebEngineSettings WebEngineView::settings + \readonly + \since QtWebEngine 1.1 + + Settings used by this view. + + \sa WebEngineSettings +*/ + + +/*! + \qmlproperty list<WebEngineScript> WebEngineView::userScripts + \readonly + \since QtWebEngine 1.1 + + List of script objects attached to the view. + + \sa WebEngineScript +*/ + +/*! + \qmlproperty real WebEngineView::zoomFactor + \since QtWebEngine 1.1 + + Zoom factor for the view. Valid values are within the range from \c{0.25} + to \c{5.0}. The default factor is \c{1.0}. +*/ + +/*! + \qmlproperty size WebEngineView::contentsSize + \since QtWebEngine 1.3 + + Size of the page contents. +*/ + +/*! + \qmlproperty point WebEngineView::scrollPosition + \since QtWebEngine 1.3 + + Scroll position of the page contents. +*/ + +/*! + \qmlproperty int WebEngineView::webChannelWorld + \since QtWebEngine 1.3 + + JavaScript world that the web channel instance used by this view is + installed in. +*/ + +/*! + \qmlmethod void WebEngineView::loadHtml(string html, url baseUrl) + Loads the specified \a html as the content of the web view. + + This method offers a lower-level alternative to the \c{url} property, + which references HTML pages via URL. + + External objects, such as stylesheets or images referenced in the HTML + document, should be located relative to \a baseUrl. For example, if \a html + is retrieved from \c http://www.example.com/documents/overview.html, which + is the base URL, then an image referenced with the relative URL, \c diagram.png, + should be at \c{http://www.example.com/documents/diagram.png}. + + \sa url +*/ + +/*! + \qmlmethod void WebEngineView::runJavaScript(string script, variant callback) + Runs the specified \a script in the content of the web view. + + The \a callback parameter is optional. If a callback function is provided, + it will be invoked after the script finishes running. + + \code + runJavaScript("document.title", function(result) { console.log(result); }); + \endcode + + The script will run in the same \e world as other scripts that are + part of the loaded site. + + \warning Do not execute lengthy routines in the callback function, because it might block the + rendering of the web content. + + See WebEngineView::userScripts for an alternative API to inject scripts. +*/ + +/*! + \qmlmethod void WebEngineView::findText(string subString) + \since QtWebEngine 1.1 + Finds the specified string, \a subString, in the page. + + To clear the search highlight, just pass an empty string. +*/ + +/*! + \qmlmethod void WebEngineView::findText(string subString, FindFlags options) + \since QtWebEngine 1.1 + Finds the specified string, \a subString, in the page, using the given \a options. + + To clear the search highlight, just pass an empty string. + + \code + findText("Qt", WebEngineView.FindBackward | WebEngineView.FindCaseSensitively); + \endcode +*/ + +/*! + \qmlmethod void WebEngineView::findText(string subString, FindFlags options, variant resultCallback) + \since QtWebEngine 1.1 + Finds the specified string, \a subString, in the page, using the given \a options. + + To clear the search highlight, just pass an empty string. + + The \a resultCallback must take a boolean parameter. It will be called with + a value of true if the \a subString was found; otherwise the callback value + will be false. + + \code + findText("Qt", WebEngineView.FindCaseSensitively, function(success) { + if (success) + console.log("Qt was found!"); + }); + \endcode +*/ + +/*! + \qmlmethod void WebEngineView::grantFeaturePermission(url securityOrigin, Feature feature, bool granted) + \since QtWebEngine 1.1 + + Sets or unsets the permission, depending on \a granted, for the web site + identified by \a securityOrigin to use \a feature. + + \sa featurePermissionRequested() +*/ + + +/*! + \qmlmethod void WebEngineView::fullScreenCancelled() + \since QtWebEngine 1.1 + + Immediately sets \c{isFullScreen} property to \c{false}. It can be used to notify the + browser engine when the windowing system forces the application to leave fullscreen mode. + + \qml + ApplicationWindow { + onVisibilityChanged: { + if (webEngineView.isFullScreen && visibility != Window.FullScreen) + webEngineView.fullScreenCancelled() + } + + WebEngineView { + id: webEngineView + // ... + } + } + \endqml + + \sa isFullScreen, fullScreenRequested() +*/ + +/*! + \qmlmethod void WebEngineView::setActiveFocusOnPress(bool arg) + \since QtWebEngine 1.2 + + Sets active focus to a clicked web engine view if \a arg is \c true. By setting it to \c false, + a web engine view can be used to create a UI element that should not get focus. This can be + useful in a hybrid UI. + + \sa activeFocusOnPressChanged, WebEngineSettings::focusOnNavigationEnabled +*/ + +/*! + \qmlmethod void WebEngineView::triggerWebAction(WebAction action) + \since QtWebEngine 1.2 + + Triggers the web action \a action. + + \sa WebAction +*/ + +/*! + \qmlsignal WebEngineView::featurePermissionRequested(url securityOrigin, Feature feature) + \since QtWebEngine 1.1 + + This signal is emitted when the web site identified by \a securityOrigin requests + to make use of the resource or device identified by \a feature. + + \sa grantFeaturePermission() +*/ + +/*! + \qmlsignal WebEngineView::loadingChanged(WebEngineLoadRequest loadRequest) + + This signal is emitted when a page load begins, ends, or fails. + + When handling the signal with \c onLoadingChanged, various read-only + parameters are available on the WebEngineLoadRequest specified by + \a loadRequest. + + \sa loading, LoadStatus, ErrorDomain +*/ + +/*! + \qmlsignal WebEngineView::certificateError(WebEngineCertificateError error) + \since QtWebEngine 1.1 + + This signal is emitted when an invalid certificate error is raised while loading a given request. + + The certificate error can be handled by using the methods of the WebEngineCertificateError + type. +*/ + +/*! + \qmlsignal WebEngineView::linkHovered(url hoveredUrl) + + Within a mouse-driven interface, this signal is emitted when a mouse + pointer passes over a link, corresponding to the \c{mouseover} DOM + event. This event may also occur in touch interfaces for \c{mouseover} + events that are not cancelled with \c{preventDefault()}. \a{hoveredUrl} + provides the link's location. +*/ + +/*! + \qmlsignal WebEngineView::javaScriptConsoleMessage(JavaScriptConsoleMessageLevel level, string message, int lineNumber, string sourceID) + This signal is emitted when a JavaScript program tries to print a \a message to the web browser's console. + + For example, in case of evaluation errors the source URL may be provided in \a sourceID as well + as the \a lineNumber. + + \a level indicates the severity of the event that triggered the message, that is, whether it + was triggered by an error or a less severe event. + + If no handler is specified, the view will log the messages into a \c js + \l{QLoggingCategory}{logging category}. + + \sa{Console Logging} +*/ + +/*! + \qmlsignal WebEngineView::newViewRequested(WebEngineNewViewRequest request) + \since QtWebEngine 1.1 + + This signal is emitted when a page load is requested to happen in a separate + web engine view. This can either be because the current page requested it explicitly + through a JavaScript call to \c window.open, or because the user clicked on a link + while holding Shift, Ctrl, or a built-in combination that triggers the page to open + in a new window. + + If this signal is not handled, the requested load will fail. + + An example implementation: + + \snippet snippets/qtwebengine_webengineview_newviewrequested.qml 0 + + \sa NewViewDestination, {WebEngine Quick Nano Browser} +*/ + +/*! + \qmlsignal WebEngineView::fullScreenRequested(WebEngineFullScreenRequest request) + \since QtWebEngine 1.1 + + This signal is emitted when the web page requests fullscreen mode through the + JavaScript API. + + \sa isFullScreen +*/ + +/*! + \qmlsignal WebEngineView::activeFocusOnPressChanged(bool activeFocusOnPress) + \since QtWebEngine 1.2 + + This signal is emitted when the ability of the web engine view to get focus when clicked + changes. + + \sa setActiveFocusOnPress() +*/ + +/*! + \qmlsignal WebEngineView::backgroundColorChanged() + \since QtWebEngine 1.2 + + This signal is emitted when the web engine view background color changes. +*/ + +/*! + \qmlsignal WebEngineView::renderProcessTerminated(RenderProcessTerminationStatus terminationStatus, int exitCode) + + \since QtWebEngine 1.2 + + This signal is emitted when the render process is terminated with a non-zero exit status. + \a terminationStatus is the termination status of the process and \a exitCode is the status code + with which the process terminated. + + \sa RenderProcessTerminationStatus +*/ + +/*! + \qmlsignal WebEngineView::windowCloseRequested() + \since QtWebEngine 1.2 + + This signal is emitted whenever the page requests the web browser window to be closed, + for example through the JavaScript \c{window.close()} call. +*/ + +/*! + \qmlproperty enumeration WebEngineView::ErrorDomain + + Describes various high-level error types: + + \value WebEngineView.NoErrorDomain + \value WebEngineView.InternalErrorDomain + Content fails to be interpreted by Qt WebEngine. + \value WebEngineView.ConnectionErrorDomain + Error results from faulty network connection. + \value WebEngineView.CertificateErrorDomain + Error related to the SSL/TLS certificate. + \value WebEngineView.HttpErrorDomain + Error related to the HTTP connection. + \value WebEngineView.FtpErrorDomain + Error related to the FTP connection. + \value WebEngineView.DnsErrorDomain + Error related to the DNS connection. +*/ + +/*! + \qmlproperty enumeration WebEngineView::JavaScriptConsoleMessageLevel + + Indicates the severity of a JavaScript console message: + + \value WebEngineView.InfoMessageLevel + Message is purely informative and can safely be ignored. + \value WebEngineView.WarningMessageLevel + Message indicates there might be a problem that may need attention. + \value WebEngineView.ErrorMessageLevel + Message indicates there has been an error. +*/ + +/*! + \qmlproperty enumeration WebEngineView::LoadStatus + + Reflects a page's load status: + + \value WebEngineView.LoadStartedStatus + Page is currently loading. + \value WebEngineView.LoadStoppedStatus + Loading the page was stopped by the stop() method or by the loader + code or network stack in Chromium. + \value WebEngineView.LoadSucceededStatus + Page has successfully loaded, and is not currently loading. + \value WebEngineView.LoadFailedStatus + Page has failed to load, and is not currently loading. +*/ + +/*! + \qmlproperty enumeration WebEngineView::NewViewDestination + + Describes how to open a new view: + + \value WebEngineView.NewViewInWindow + In a separate Window. + \value WebEngineView.NewViewInTab + In a tab of the same window. + \value WebEngineView.NewViewInDialog + In a Window without a tab bar, toolbar, or URL bar. + \value WebEngineView.NewViewInBackgroundTab + In a tab of the same window, without hiding the currently visible web engine view. + + \sa {WebEngineNewViewRequest::destination}{WebEngineNewViewRequest.destination} +*/ + +/*! + \qmlproperty enumeration WebEngineView::FindFlags + + Describes the options available to the findText() function. The options + can be OR-ed together from the following list: + + \value WebEngineView.FindBackward + Searches backwards instead of forwards. + \value WebEngineView.FindFlags FindCaseSensitively + By default findText() works case insensitive. Specifying + this option changes the behavior to a case sensitive find operation. + + \sa findText() +*/ + +/*! + \qmlproperty enumeration WebEngineView::RenderProcessTerminationStatus + \since QtWebEngine 1.2 + + Describes the status with which the render process terminated: + + \value WebEngineView.NormalTerminationStatus + The render process terminated normally. + \value WebEngineView.AbnormalTerminationStatus + The render process terminated with a non-zero exit status. + \value WebEngineView.CrashedTerminationStatus + The render process crashed, for example because of a segmentation fault. + \value WebEngineView.KilledTerminationStatus + The render process was killed, for example by \c SIGKILL or task manager kill. +*/ + +/*! + \qmlproperty enumeration WebEngineView::WebAction + \since QtWebEngine 1.2 + + Describes the types of action that can be performed on a web page: + + \value WebEngineView.NoWebAction + No action is triggered. + \value WebEngineView.Back + Navigate back in the history of navigated links. + \value WebEngineView.Forward + Navigate forward in the history of navigated links. + \value WebEngineView.Stop + Stop loading the current page. + \value WebEngineView.Reload + Reload the current page. + \value WebEngineView.ReloadAndBypassCache + Reload the current page, but do not use any local cache. + \value WebEngineView.Cut + Cut the content currently selected into the clipboard. + \value WebEngineView.Copy + Copy the content currently selected into the clipboard. + \value WebEngineView.Paste + Paste content from the clipboard. + \value WebEngineView.Undo + Undo the last editing action. + \value WebEngineView.Redo + Redo the last editing action. + \value WebEngineView.SelectAll + Select all content. + \value WebEngineView.PasteAndMatchStyle + Paste content from the clipboard with current style. + \value WebEngineView.OpenLinkInThisWindow + Open the current link in the current window. (Added in Qt 5.6) + \value WebEngineView.OpenLinkInNewWindow + Open the current link in a new window. (Added in Qt 5.6) + \value WebEngineView.OpenLinkInNewTab + Open the current link in a new tab. (Added in Qt 5.6) + \value WebEngineView.CopyLinkToClipboard + Copy the current link to the clipboard. (Added in Qt 5.6) + \value WebEngineView.CopyImageToClipboard + Copy the clicked image to the clipboard. (Added in Qt 5.6) + \value WebEngineView.CopyImageUrlToClipboard + Copy the clicked image's URL to the clipboard. (Added in Qt 5.6) + \value WebEngineView.CopyMediaUrlToClipboard + Copy the hovered audio or video's URL to the clipboard. (Added in Qt 5.6) + \value WebEngineView.ToggleMediaControls + Toggle between showing and hiding the controls for the hovered audio or video element. + (Added in Qt 5.6) + \value WebEngineView.ToggleMediaLoop + Toggle whether the hovered audio or video should loop on completetion or not. + (Added in Qt 5.6) + \value WebEngineView.ToggleMediaPlayPause + Toggle the play/pause state of the hovered audio or video element. (Added in Qt 5.6) + \value WebEngineView.ToggleMediaMute + Mute or unmute the hovered audio or video element. (Added in Qt 5.6) + \value WebEngineView.DownloadLinkToDisk + Download the current link to the disk. To implement download + actions, connect to the QWebEngineProfile::downloadRequested signal. + (Added in Qt 5.6) + \value WebEngineView.DownloadImageToDisk + Download the highlighted image to the disk. (Added in Qt 5.6) + \value WebEngineView.DownloadMediaToDisk + Download the hovered audio or video to the disk. (Added in Qt 5.6) + \value WebEngineView.InspectElement + Trigger any attached Web Inspector to inspect the highlighed element. + (Added in Qt 5.6) + \value WebEngineView.ExitFullScreen + Exit the fullscreen mode. (Added in Qt 5.6) + \value WebEngineView.SavePage + Save the current web page to disk. (Added in Qt 5.7) + \value WebEngineView.ViewSource + Show the source of the current page in a new tab. (Added in Qt 5.8) + + \omitvalue WebActionCount +*/ + +/*! + \qmlproperty enumeration WebEngineView::Feature + + Describes the platform feature access categories that the user may be asked to grant or deny + access to: + + \value WebEngineView.Geolocation + Location hardware or service. + \value WebEngineView.MediaAudioCapture + Audio capture devices, such as microphones. + \value WebEngineView.MediaVideoCapture + Video devices, such as cameras. + \value WebEngineView.MediaAudioVideoCapture + Both audio and video capture devices. + + \sa featurePermissionRequested(), grantFeaturePermission() +*/ + +/*! + \qmlproperty enumeration WebEngineView::PrintedPageSizeId + \since QtWebEngine 1.3 + + This enum type lists the available page sizes as defined in the Postscript + PPD standard. + + The enumeration values are mapped from and must match QPageSize::PageSizeId. They are also + duplicated in QPagedPaintDevice and QPrinter. + + The defined sizes are: + + \value WebEngineView.A0 841 x 1189 mm + \value WebEngineView.A1 594 x 841 mm + \value WebEngineView.A2 420 x 594 mm + \value WebEngineView.A3 297 x 420 mm + \value WebEngineView.A4 210 x 297 mm, 8.26 x 11.69 inches + \value WebEngineView.A5 148 x 210 mm + \value WebEngineView.A6 105 x 148 mm + \value WebEngineView.A7 74 x 105 mm + \value WebEngineView.A8 52 x 74 mm + \value WebEngineView.A9 37 x 52 mm + \value WebEngineView.B0 1000 x 1414 mm + \value WebEngineView.B1 707 x 1000 mm + \value WebEngineView.B2 500 x 707 mm + \value WebEngineView.B3 353 x 500 mm + \value WebEngineView.B4 250 x 353 mm + \value WebEngineView.B5 176 x 250 mm, 6.93 x 9.84 inches + \value WebEngineView.B6 125 x 176 mm + \value WebEngineView.B7 88 x 125 mm + \value WebEngineView.B8 62 x 88 mm + \value WebEngineView.B9 44 x 62 mm + \value WebEngineView.B10 31 x 44 mm + \value WebEngineView.C5E 163 x 229 mm + \value WebEngineView.Comm10E 105 x 241 mm, U.S. Common 10 Envelope + \value WebEngineView.DLE 110 x 220 mm + \value WebEngineView.Executive 7.5 x 10 inches, 190.5 x 254 mm + \value WebEngineView.Folio 210 x 330 mm + \value WebEngineView.Ledger 431.8 x 279.4 mm + \value WebEngineView.Legal 8.5 x 14 inches, 215.9 x 355.6 mm + \value WebEngineView.Letter 8.5 x 11 inches, 215.9 x 279.4 mm + \value WebEngineView.Tabloid 279.4 x 431.8 mm + \value WebEngineView.Custom Unknown, or a user defined size. + \value WebEngineView.A10 + \value WebEngineView.A3Extra + \value WebEngineView.A4Extra + \value WebEngineView.A4Plus + \value WebEngineView.A4Small + \value WebEngineView.A5Extra + \value WebEngineView.B5Extra + \value WebEngineView.JisB0 + \value WebEngineView.JisB1 + \value WebEngineView.JisB2 + \value WebEngineView.JisB3 + \value WebEngineView.JisB4 + \value WebEngineView.JisB5 + \value WebEngineView.JisB6 + \value WebEngineView.JisB7 + \value WebEngineView.JisB8 + \value WebEngineView.JisB9 + \value WebEngineView.JisB10 + \value WebEngineView.AnsiA = \c Letter + \value WebEngineView.AnsiB = \c Ledger + \value WebEngineView.AnsiC + \value WebEngineView.AnsiD + \value WebEngineView.AnsiE + \value WebEngineView.LegalExtra + \value WebEngineView.LetterExtra + \value WebEngineView.LetterPlus + \value WebEngineView.LetterSmall + \value WebEngineView.TabloidExtra + \value WebEngineView.ArchA + \value WebEngineView.ArchB + \value WebEngineView.ArchC + \value WebEngineView.ArchD + \value WebEngineView.ArchE + \value WebEngineView.Imperial7x9 + \value WebEngineView.Imperial8x10 + \value WebEngineView.Imperial9x11 + \value WebEngineView.Imperial9x12 + \value WebEngineView.Imperial10x11 + \value WebEngineView.Imperial10x13 + \value WebEngineView.Imperial10x14 + \value WebEngineView.Imperial12x11 + \value WebEngineView.Imperial15x11 + \value WebEngineView.ExecutiveStandard + \value WebEngineView.Note + \value WebEngineView.Quarto + \value WebEngineView.Statement + \value WebEngineView.SuperA + \value WebEngineView.SuperB + \value WebEngineView.Postcard + \value WebEngineView.DoublePostcard + \value WebEngineView.Prc16K + \value WebEngineView.Prc32K + \value WebEngineView.Prc32KBig + \value WebEngineView.FanFoldUS + \value WebEngineView.FanFoldGerman + \value WebEngineView.FanFoldGermanLegal + \value WebEngineView.EnvelopeB4 + \value WebEngineView.EnvelopeB5 + \value WebEngineView.EnvelopeB6 + \value WebEngineView.EnvelopeC0 + \value WebEngineView.EnvelopeC1 + \value WebEngineView.EnvelopeC2 + \value WebEngineView.EnvelopeC3 + \value WebEngineView.EnvelopeC4 + \value WebEngineView.EnvelopeC5 = \c C5E + \value WebEngineView.EnvelopeC6 + \value WebEngineView.EnvelopeC65 + \value WebEngineView.EnvelopeC7 + \value WebEngineView.EnvelopeDL = \c DLE + \value WebEngineView.Envelope9 + \value WebEngineView.Envelope10 = \c Comm10E + \value WebEngineView.Envelope11 + \value WebEngineView.Envelope12 + \value WebEngineView.Envelope14 + \value WebEngineView.EnvelopeMonarch + \value WebEngineView.EnvelopePersonal + \value WebEngineView.EnvelopeChou3 + \value WebEngineView.EnvelopeChou4 + \value WebEngineView.EnvelopeInvite + \value WebEngineView.EnvelopeItalian + \value WebEngineView.EnvelopeKaku2 + \value WebEngineView.EnvelopeKaku3 + \value WebEngineView.EnvelopePrc1 + \value WebEngineView.EnvelopePrc2 + \value WebEngineView.EnvelopePrc3 + \value WebEngineView.EnvelopePrc4 + \value WebEngineView.EnvelopePrc5 + \value WebEngineView.EnvelopePrc6 + \value WebEngineView.EnvelopePrc7 + \value WebEngineView.EnvelopePrc8 + \value WebEngineView.EnvelopePrc9 + \value WebEngineView.EnvelopePrc10 + \value WebEngineView.EnvelopeYou4 + \value WebEngineView.LastPageSize = \c EnvelopeYou4 + \omitvalue NPageSize + \omitvalue NPaperSize + + \sa WebEngineView::printToPdf() +*/ + +/*! + \qmlproperty enumeration WebEngineView::PrintedPageOrientation + \since QtWebEngine 1.3 + + Describes the orientation of a PDF document that gets created from the WebEngineView's contents. + The enumeration values are mapped from and must match QPageLayout::Orientation. + + \value WebEngineView.Portrait + The document will be created using portrait orientation. + + \value WebEngineView.Landscape + The document will be created using landscape orientation. + + \sa WebEngineView::printToPdf() +*/ + +/*! + \qmlproperty bool WebEngineView::activeFocusOnPress + \since QtWebEngine 1.2 + + Specifies whether the view should gain active focus when pressed. + The default value is \c true. +*/ + +/*! + \qmlproperty bool WebEngineView::backgroundColor + \since QtWebEngine 1.2 + + Changes the color of the WebEngineView's background, behind the document's + body. Can be set to \c "transparent" or to a translucent color to see + through the document or to match the web content in a hybrid app to prevent + the white flashes that may appear during loading. + + The default value is white. +*/ + +/*! + \qmltype WebEngineFullScreenRequest + \instantiates QQuickWebEngineFullScreenRequest + \inqmlmodule QtWebEngine + \since QtWebEngine 1.1 + + \brief A utility type for the WebEngineView::fullScreenRequested() signal. + + \sa WebEngineView::fullScreenRequested() +*/ + +/*! + \qmlproperty url WebEngineFullScreenRequest::origin + \readonly + The URL of the web page that issued the fullscreen request. +*/ + +/*! + \qmlproperty bool WebEngineFullScreenRequest::toggleOn + \readonly + + Returns \c{true} if the application should toggle fullscreen mode on, \c{false} otherwise. + + \sa accept() +*/ + +/*! + \qmlmethod void WebEngineFullScreenRequest::accept() + + Call this method to accept the fullscreen request. It sets the WebEngineView::isFullScreen + property to be equal to toggleOn. + + \qml + ApplicationWindow { + id: window + WebEngineView { + onFullScreenRequested: function(request) { + if (request.toggleOn) + window.showFullScreen() + else + window.showNormal() + request.accept() + } + } + } + \endqml + + \sa toggleOn +*/ + +/*! + \qmlmethod void WebEngineFullScreenRequest::reject() + Rejects a fullscreen request. +*/ + +/*! + \qmlproperty bool WebEngineView::audioMuted + \brief The state of whether the current page audio is muted. + \since QtWebEngine 1.3 + \sa recentlyAudible +*/ + +/*! + \qmlsignal WebEngineView::audioMutedChanged(bool muted) + \since QtWebEngine 1.3 + + This signal is emitted when the page's audio is (un)muted using audioMuted property. + \note Not to be confused with a specific HTML5 audio / video element being muted. + + \sa audioMuted, recentlyAudibleChanged +*/ + +/*! + \qmlproperty bool WebEngineView::recentlyAudible + \brief Returns the current page's audible state (audio was recently played, or not). + \since QtWebEngine 1.3 + \readonly + \sa audioMuted, recentlyAudibleChanged +*/ + +/*! + \qmlsignal WebEngineView::recentlyAudibleChanged(bool recentlyAudible) + \since QtWebEngine 1.3 + + This signal is emitted when the page's audible state is changed, due to audio + being played or stopped. + + \note The signal is also emitted when the audioMuted property changes. + Also if the audio is paused, this signal is emitted with an approximate \b{two-second + delay}, from the moment the audio is paused. + + This signal is also emitted for Flash plugin audio. + + If a web page contains two videos that are started in sequence, this signal + gets emitted only once, for the first video to generate sound. After both + videos are stopped, the signal is emitted upon the last sound generated. + This means that the signal is emitted both when any kind of sound is + generated and when everything is completely silent within a web page, + regardless of the number of audio streams. + + Spurious signal emissions might also happen. For example, when sound is + stopped, this signal gets emitted first with a value of \c true, and then + with a value of \c false. Further, when audio starts playing, the signal is + emitted twice with a value of \c true. + + \sa recentlyAudible +*/ + +/*! + \qmlsignal WebEngineView::pdfPrintingFinished(string filePath, bool success) + \since QtWebEngine 1.5 + + This signal is emitted when printing the web page into a PDF file has + finished. + \a filePath will contain the path the file was requested to be created + at, and \a success will be \c true if the file was successfully created and + \c false otherwise. + + \sa printToPdf() +*/ + +/*! + \qmlmethod void WebEngineView::printToPdf(const string filePath, PrintedPageSizeId pageSizeId, PrintedPageOrientation orientation) + \since QtWebEngine 1.3 + + Prints the WebEngineView's current content to a PDF document and stores it + under \a filePath. The document's size will be determined by the value of + \a pageSizeId and its orientation will be determined using \a orientation. + + This method issues an asynchronous request for printing the web page into a + PDF and returns immediately. To be informed about the result of the + request, connect to the signal pdfPrintingFinished(). + + If you leave out \a pageSizeID, it defaults to \c A4. If you leave out + \a orientation, it defaults to \c Portrait. + + \sa pdfPrintingFinished() +*/ + +/*! + \qmlmethod void WebEngineView::printToPdf(variant resultCallback, PrintedPageSizeId pageSizeId, PrintedPageOrientation orientation) + \since QtWebEngine 1.3 + + Prints the WebEngineView's current content to a PDF document and returns it in a byte array. The document's size will be determined + by the value of \a pageSizeId and its orientation will be determined using \a orientation. + + The \a resultCallback must take a string parameter. This string will contain the document's data upon successful printing and an empty + string otherwise. + + If you leave out \a pageSizeID, it defaults to \c A4. If you leave out + \a orientation, it defaults to \c Portrait. +*/ + +/*! + \qmlmethod void WebEngineView::replaceMisspelledWord(const QString &replacement) + \since QtWebEngine 1.3 + + Replace the current misspelled word with \a replacement. +*/ + +/*! + \qmlsignal WebEngineView::wasRecentlyAudibleChanged(bool wasRecentlyAudible) + \since QtWebEngine 1.3 + + This signal is emitted when the page's audible state is changed, due to audio + being played or stopped. + + \note The signal is also emitted when calling the setAudioMuted method. + Also if the audio is paused, this signal is emitted with an approximate \b{2 second + delay}, from the moment the audio is paused. +*/ + +/*! + \qmlsignal WebEngineView::authenticationDialogRequested(AuthenticationDialogRequest request) + \since QtWebEngine 1.4 + + This signal is emitted when an authentication dialog is requested. + + The request can be handled by using the methods of the AuthenticationDialogRequest + type. + + \note Signal handlers need to call \c{request.accepted = true} to prevent a + default dialog from showing up. Make sure to call either + AuthenticationDialogRequest::dialogAccept() or AuthenticationDialogRequest::dialogReject() + afterwards. +*/ + +/*! + \qmlsignal WebEngineView::javaScriptDialogRequested(JavaScriptDialogRequest request) + \since QtWebEngine 1.4 + + This signal is emitted when a JavaScript dialog is requested. + + The request can be handled by using the methods of the JavaScriptDialogRequest + type. + + \note Signal handlers need to call \c{request.accepted = true} to prevent a + default dialog from showing up. Make sure to call either + JavaScriptDialogRequest::dialogAccept() or JavaScriptDialogRequest::dialogReject() + afterwards. +*/ + +/*! + \qmlsignal WebEngineView::colorDialogRequested(ColorDialogRequest request) + \since QtWebEngine 1.4 + + This signal is emitted when a color picker dialog is requested. + + The request can be handled by using the methods of the ColorDialogRequest + type. + + \note Signal handlers need to call \c{request.accepted = true} to prevent a + default dialog from showing up. Make sure to call either + ColorDialogRequest::dialogAccept() or ColorDialogRequest::dialogReject() afterwards. +*/ + +/*! + \qmlsignal WebEngineView::fileDialogRequested(FileDialogRequest request) + \since QtWebEngine 1.4 + + This signal is emitted when a file picker dialog is requested. + + The request error can be handled by using the methods of the FileDialogRequest + type. + + \note Signal handlers need to call \c{request.accepted = true} to prevent a + default dialog from showing up. Make sure to call either FileDialogRequest::dialogAccept() + or FileDialogRequest::dialogReject() afterwards. +*/ + +/*! + \qmlsignal WebEngineView::formValidationMessageRequested(FormValidationMessageRequest request) + \since QtWebEngine 1.4 + + This signal is emitted when a validation message is requested. + + The request can be handled by using the methods of the FormValidationMessageRequest + type. + + \note Signal handlers need to call \c{request.accepted = true} to prevent a + default dialog from showing up. +*/ + +/*! + \qmlsignal WebEngineView::contextMenuRequested(ContextMenuRequest request) + \since QtWebEngine 1.4 + + This signal is emitted when a context menu is requested. + + The request can be handled by using the properties of the ContextMenuRequest + type. + + \note Signal handlers need to call \c{request.accepted = true} to prevent a + default context menu from showing up. +*/ + +/*! \qmlsignal WebEngineView::navigationRequested(WebEngineNavigationRequest request) + This signal is emitted when the navigation request \a request is issued. +*/ -- cgit v1.2.3