diff options
Diffstat (limited to 'tests/systemtests/audio/sys_audio.qtt')
| -rw-r--r-- | tests/systemtests/audio/sys_audio.qtt | 295 |
1 files changed, 0 insertions, 295 deletions
diff --git a/tests/systemtests/audio/sys_audio.qtt b/tests/systemtests/audio/sys_audio.qtt deleted file mode 100644 index 142a964..0000000 --- a/tests/systemtests/audio/sys_audio.qtt +++ /dev/null @@ -1,295 +0,0 @@ -/**************************************************************************** -** -** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). -** All rights reserved. -** Contact: Nokia Corporation (qt-info@nokia.com) -** -** This file is part of the Qt Mobility Components. -** -** $QT_BEGIN_LICENSE:LGPL$ -** GNU Lesser General Public License Usage -** This file may be used under the terms of the GNU Lesser General Public -** License version 2.1 as published by the Free Software Foundation and -** appearing in the file LICENSE.LGPL included in the packaging of this -** file. Please review the following information to ensure the GNU Lesser -** General Public License version 2.1 requirements will be met: -** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. -** -** In addition, as a special exception, Nokia gives you certain additional -** rights. These rights are described in the Nokia Qt LGPL Exception -** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. -** -** GNU General Public License Usage -** Alternatively, this file may be used under the terms of the GNU General -** Public License version 3.0 as published by the Free Software Foundation -** and appearing in the file LICENSE.GPL included in the packaging of this -** file. Please review the following information to ensure the GNU General -** Public License version 3.0 requirements will be met: -** http://www.gnu.org/copyleft/gpl.html. -** -** Other Usage -** Alternatively, this file may be used in accordance with the terms and -** conditions contained in a signed written agreement between you and Nokia. -** -** -** -** -** -** $QT_END_LICENSE$ -** -****************************************************************************/ - -//TESTED_COMPONENT=src/multimedia - -testcase = { - -/* Notes -Ensure 2 test .mp3 file available on device -Ensure 2 test .wav file available on device -Ensure a valid m3u file referring to locations where indicated media is available on the device -Ensure the device can ping destinations on the network (if applicable) -Have an audio stream url available (e.g. http://202.6.74.107:8060/triplej.mp3 for example) -Ensure access to Internet available to device either via 3G and WiFi -SIM cards from Vodafone and Testra (Australia) needed for 3G streaming testing -*/ - initTestCase: function() - { - }, - - play_an_audio_file_data: { - mp3:[".mp3", "filename", "mpeg audio layer 3"], - wav:[".wav", "filename", "waveform audio"] - }, - - play_an_audio_file: function(extension, filename, format) - { - // Test meta data - testApplication = "Multimedia - Play Audio File"; - testBinary = "player"; - testGoal = "Verify that Audio files can be played."; - testPreconditions = "Audio files in " + extension + " format are available on device."; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Select [Open] | | - | Click Open, then select desired "+filename+extension+" file to return to player UI | Verify selected file has populated playlist window | - | Highlight file in playlist window by clicking on it | | - | Select [Play] | Verify that the " + format + " file is audible on device | - ")); - }, - - basic_player_controls_for_audio_data: { - mp3:[".mp3", "filename", "mpeg audio layer 3"], - }, - - basic_player_controls_for_audio: function(extension, filename, format) - { - // Test meta data - testApplication = "Multimedia - Audio Player Controls"; - testBinary = "player"; - testGoal = "Verify basic API for controling audio playback "; - testPreconditions = "a test "+extension+" file is available on device"; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Select Open | | - | In [Open Files] either double click the desired "+filename+extension+" or highlight and click Open to be returned to the player UI | | - | Highlight and click Play or doubleclick to play the file | Verify that file plays properly from the start | - | | Verify that the correct track details are displayed on the application title bar | - | Select [Pause] | Verify that file has paused | - | | Verify that [Pause] icon has now changed to a [Play] icon | - | Select [Play] | Verify that file continues to play properly from where previously paused. | - | | Verify that [Play] icon is now a [Pause] icon again | - | Select [Next File] control | Verify that next file in playlist is playing from start | - | | Verify that the title bar has changed to reflect the seclected audio track | - | After some time (10-20 sec) Select [Beginning of File] icon | Verify that current file is being played from start | - | Let some arbitrary time pass, then Select [Beginning of File] control twice in quick succession. | Verify that previous file in playlist is playing from start | - | Select [Stop] control | Verify that file has stopped playing | - | Select [Play] | Verify that file continues to play from start of file. | - | Let file play till end | Verify player continues playing the next file in the playlist window | - | After some arbitrary time, Select [Stop] | | - | Select [Next File] control | Verify that next file in playlist is highlighted | - | | Verify that file is not automatically playing | - | Select [Beginning of File] control | Verify that previous file in playlist is highlighted | - | Select file in playlist | Verify that file plays in player. | - | Select number of files greater than can be displayed without scrolling in to playlist | Verify that list can be scrolled through | - | With file playing, verify that hardware keys can change volume up and down | | - | With file playing, verify that UI volume control slider can change volume up and down | | - | Select volume at 50% (or thereabout) | | - | Select [Mute] | Verify that sound is muted while file is playing | - | | Verify that [Mute] control is displaying the Muted icon | - | Select [Mute] control again | Verify that sound has reverted back to level selected prior to muting | - | Click on Full Screen | Verify that nothing happens when playing an audio file | - | Click Color Option | Verify that this has no effect when playing an audio file | - ")); - - }, - - seek_controls_for_audio_data: { - mp3:[".mp3", "filename", "mpeg audio layer 3"], - }, - - seek_controls_for_audio: function(extension, filename, format) - { - // Test meta data - testApplication = "Multimedia - Audio Seek Controls"; - testBinary = "player"; - testGoal = "Verify FastForward and Rewind functionality of the API"; - testPreconditions = "a test "+extension+" file is available on device"; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Select [Open] | | - | In [Open File] select the "+filename+extension+" file to return to player UI | | - | Select [Play] to play the file | | - | Click on the [1.0x] (Multiplier) dropbox and select 2.0x | Verify that file is playing at double speed | - | With multiplier control set on [2.0], select a new file from the playlist window | Verify that the Multiplier control has reverted back to [1.0x] | - | | Verify that the audio is playing at normal speed | - | Click on the [Multiplier] control and select 0.5x | Verify that file is playing at half speed | - | With multiplier control set on [0.5], select a new file from the playlist window | Verify that the Multiplier control has reverted back to [1.0x] | - | | Verify that the audio is playing at normal speed | - | Drag positional slider to right, then release | Verify that player continues to play file at later part of file | - | Drag positional slider to left, then release | Verify that player continues to play file at earlier part of file | - | Click on the [1.0x] (Multiplier) dropbox and select 2.0x | Verify that file is playing at double speed | - | Drag positional slider to right, then release | Verify that player continues to play file at later part of file at double speed | - | Drag positional slider to left, then release | Verify that player continues to play file at earlier part of file at double speed | - | Click on the Multiplier dropbox and select 0.5x | Verify that file is playing at half the speed | - | Drag positional slider to right, then release | Verify that player continues to play file at later part of file at half speed | - | Drag positional slider to left, then release | Verify that player continues to play file at earlier part of file at half speed | - ")); - }, - - - - basic_controls_for_streamed_audio_content: function() - { - -//*Note* For this test you need a playlist of streaming media urls. Suggest: http://202.6.74.107:8060/triplej.mp3 ; http://www.abc.net.au/streaming/triplej.asx ; rtsp://media1.abc.net.au/broadcast/triplej.rm ; mms://media3.abc.net.au/triplej ; depending on your platform and backend support. - - // Test meta data - testApplication = "Multimedia - Content Streaming"; - testBinary = "player"; - testGoal = "Verify playback of streaming audio media"; - testPreconditions = ""; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | In player application, Select or Tap [Open] | | - | In [Open File] navigate and highlight test (streaming) playlist file | | - | Select or Tap on selected file to return to player UI | Verify selected file has populated playlist | - | Highlight file in playlist by selecting or clicking it | | - | Select [Play] | Verify that stream is playing on device | - | Select [Pause] | Verify that stream is paused on device | - | | Verify that the [Pause] button has changed to a [Play] button | - | Select [Play] again | Verify that stream is playing on device | - | Select [Stop] | | - | Open local mp3 file in to play list and select it to play | Verify that the mp3 plays while the stream name is still present in the playlist | - | Re-select the stream in the playlist | Verify that the stream starts playing again | - | Select [Next File] | Verify that the player started playing the next file in the playlist | - | Select [Previous File] | Verify that the original stream is playing again | - | During stream playback, have headphones connected to device | Verify that the sound is now playing through the headphones | - | Invoke a system notification on the device (such as an incoming SMS) | Verify that the device correctly transmits the audible system notification through the devices speakers and then returns to playing the stream through the headphones | - ")); - }, - - record_an_audio_file: function() - { - - // Test meta data - testApplication = "Multimedia - Recording Audio"; - testBinary = "audiorecorder"; - testGoal = "Verify that audio can be recorded."; - testPreconditions = ""; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Select Input Device | | - | Select Audio Codec | | - | Select File Container | | - | Select Sample Rate | | - | Select Quality and Bitrate | | - | Select Output... and select location and name of output file | | - | Select Record | Verify that [Record] button has changed in to [Stop] | - | | Verify that Duration is counting seconds | - | | Verify that Recording is displayed | - | Select Stop | Verify that Duration is now 0 | - | Select Output File in file browser | Verify that an audio file has been generated | - | Play output file in media player | Verify that audible audio is recorded in file | - ")); - }, - -pause_recording_an_audio_file: function() - { - - // Test meta data - testApplication = "Multimedia - Pause Recording Audio"; - testBinary = "audiorecorder"; - testGoal = "Verify API to be able to pause audio recording without unwanted artifacts."; - testPreconditions = ""; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Select Input Device | | - | Select Audio Codec | | - | Select File Container | | - | Select Sample Rate | | - | Select Quality and Bitrate | | - | Select Output... and select location and name of output file | | - | Select Record | Verify that [Record] button has changed in to [Stop] | - | | Verify that Duration is counting seconds | - | | Verify that Recording is displayed | - | Speak in to the microphone. Suggest counting from 1 to 5 | | - | Select Pause | Verify that instead of Duration, Paused is displayed | - | Keep speaking in to microfon, continue counting from 6 to 10 | | - | Select Resume | Verify that the counter has resumed the seconds count from where it was previously paused. | - | Continue counting from 11 to 15 in to the microphone | | - | After a arbitrary time, Stop the recording. | | - | Select Output File in file browser | Verify that an audio file has been generated | - | Play output file in media player | Verify that audible audio is recorded in file and that audio is only recorded for period that Pause was not selected | - | | Verify that the recording reproduces the counting from 1 to 5 then continues from 11 to 15 and that the counting from 6 - 10 is not recorded | - | | Verify there is no audible artifact that separates the two or more recording periods, that is that the joint is seamless | - ")); - }, -} |