diff options
Diffstat (limited to 'tests/systemtests')
| -rw-r--r-- | tests/systemtests/audio/sys_audio.qtt | 295 | ||||
| -rw-r--r-- | tests/systemtests/camera/sys_camera.qtt | 181 | ||||
| -rw-r--r-- | tests/systemtests/radio/sys_radio.qtt | 161 | ||||
| -rw-r--r-- | tests/systemtests/video/sys_video.qtt | 269 |
4 files changed, 0 insertions, 906 deletions
diff --git a/tests/systemtests/audio/sys_audio.qtt b/tests/systemtests/audio/sys_audio.qtt deleted file mode 100644 index 142a964..0000000 --- a/tests/systemtests/audio/sys_audio.qtt +++ /dev/null @@ -1,295 +0,0 @@ -/**************************************************************************** -** -** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). -** All rights reserved. -** Contact: Nokia Corporation (qt-info@nokia.com) -** -** This file is part of the Qt Mobility Components. -** -** $QT_BEGIN_LICENSE:LGPL$ -** GNU Lesser General Public License Usage -** This file may be used under the terms of the GNU Lesser General Public -** License version 2.1 as published by the Free Software Foundation and -** appearing in the file LICENSE.LGPL included in the packaging of this -** file. Please review the following information to ensure the GNU Lesser -** General Public License version 2.1 requirements will be met: -** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. -** -** In addition, as a special exception, Nokia gives you certain additional -** rights. These rights are described in the Nokia Qt LGPL Exception -** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. -** -** GNU General Public License Usage -** Alternatively, this file may be used under the terms of the GNU General -** Public License version 3.0 as published by the Free Software Foundation -** and appearing in the file LICENSE.GPL included in the packaging of this -** file. Please review the following information to ensure the GNU General -** Public License version 3.0 requirements will be met: -** http://www.gnu.org/copyleft/gpl.html. -** -** Other Usage -** Alternatively, this file may be used in accordance with the terms and -** conditions contained in a signed written agreement between you and Nokia. -** -** -** -** -** -** $QT_END_LICENSE$ -** -****************************************************************************/ - -//TESTED_COMPONENT=src/multimedia - -testcase = { - -/* Notes -Ensure 2 test .mp3 file available on device -Ensure 2 test .wav file available on device -Ensure a valid m3u file referring to locations where indicated media is available on the device -Ensure the device can ping destinations on the network (if applicable) -Have an audio stream url available (e.g. http://202.6.74.107:8060/triplej.mp3 for example) -Ensure access to Internet available to device either via 3G and WiFi -SIM cards from Vodafone and Testra (Australia) needed for 3G streaming testing -*/ - initTestCase: function() - { - }, - - play_an_audio_file_data: { - mp3:[".mp3", "filename", "mpeg audio layer 3"], - wav:[".wav", "filename", "waveform audio"] - }, - - play_an_audio_file: function(extension, filename, format) - { - // Test meta data - testApplication = "Multimedia - Play Audio File"; - testBinary = "player"; - testGoal = "Verify that Audio files can be played."; - testPreconditions = "Audio files in " + extension + " format are available on device."; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Select [Open] | | - | Click Open, then select desired "+filename+extension+" file to return to player UI | Verify selected file has populated playlist window | - | Highlight file in playlist window by clicking on it | | - | Select [Play] | Verify that the " + format + " file is audible on device | - ")); - }, - - basic_player_controls_for_audio_data: { - mp3:[".mp3", "filename", "mpeg audio layer 3"], - }, - - basic_player_controls_for_audio: function(extension, filename, format) - { - // Test meta data - testApplication = "Multimedia - Audio Player Controls"; - testBinary = "player"; - testGoal = "Verify basic API for controling audio playback "; - testPreconditions = "a test "+extension+" file is available on device"; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Select Open | | - | In [Open Files] either double click the desired "+filename+extension+" or highlight and click Open to be returned to the player UI | | - | Highlight and click Play or doubleclick to play the file | Verify that file plays properly from the start | - | | Verify that the correct track details are displayed on the application title bar | - | Select [Pause] | Verify that file has paused | - | | Verify that [Pause] icon has now changed to a [Play] icon | - | Select [Play] | Verify that file continues to play properly from where previously paused. | - | | Verify that [Play] icon is now a [Pause] icon again | - | Select [Next File] control | Verify that next file in playlist is playing from start | - | | Verify that the title bar has changed to reflect the seclected audio track | - | After some time (10-20 sec) Select [Beginning of File] icon | Verify that current file is being played from start | - | Let some arbitrary time pass, then Select [Beginning of File] control twice in quick succession. | Verify that previous file in playlist is playing from start | - | Select [Stop] control | Verify that file has stopped playing | - | Select [Play] | Verify that file continues to play from start of file. | - | Let file play till end | Verify player continues playing the next file in the playlist window | - | After some arbitrary time, Select [Stop] | | - | Select [Next File] control | Verify that next file in playlist is highlighted | - | | Verify that file is not automatically playing | - | Select [Beginning of File] control | Verify that previous file in playlist is highlighted | - | Select file in playlist | Verify that file plays in player. | - | Select number of files greater than can be displayed without scrolling in to playlist | Verify that list can be scrolled through | - | With file playing, verify that hardware keys can change volume up and down | | - | With file playing, verify that UI volume control slider can change volume up and down | | - | Select volume at 50% (or thereabout) | | - | Select [Mute] | Verify that sound is muted while file is playing | - | | Verify that [Mute] control is displaying the Muted icon | - | Select [Mute] control again | Verify that sound has reverted back to level selected prior to muting | - | Click on Full Screen | Verify that nothing happens when playing an audio file | - | Click Color Option | Verify that this has no effect when playing an audio file | - ")); - - }, - - seek_controls_for_audio_data: { - mp3:[".mp3", "filename", "mpeg audio layer 3"], - }, - - seek_controls_for_audio: function(extension, filename, format) - { - // Test meta data - testApplication = "Multimedia - Audio Seek Controls"; - testBinary = "player"; - testGoal = "Verify FastForward and Rewind functionality of the API"; - testPreconditions = "a test "+extension+" file is available on device"; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Select [Open] | | - | In [Open File] select the "+filename+extension+" file to return to player UI | | - | Select [Play] to play the file | | - | Click on the [1.0x] (Multiplier) dropbox and select 2.0x | Verify that file is playing at double speed | - | With multiplier control set on [2.0], select a new file from the playlist window | Verify that the Multiplier control has reverted back to [1.0x] | - | | Verify that the audio is playing at normal speed | - | Click on the [Multiplier] control and select 0.5x | Verify that file is playing at half speed | - | With multiplier control set on [0.5], select a new file from the playlist window | Verify that the Multiplier control has reverted back to [1.0x] | - | | Verify that the audio is playing at normal speed | - | Drag positional slider to right, then release | Verify that player continues to play file at later part of file | - | Drag positional slider to left, then release | Verify that player continues to play file at earlier part of file | - | Click on the [1.0x] (Multiplier) dropbox and select 2.0x | Verify that file is playing at double speed | - | Drag positional slider to right, then release | Verify that player continues to play file at later part of file at double speed | - | Drag positional slider to left, then release | Verify that player continues to play file at earlier part of file at double speed | - | Click on the Multiplier dropbox and select 0.5x | Verify that file is playing at half the speed | - | Drag positional slider to right, then release | Verify that player continues to play file at later part of file at half speed | - | Drag positional slider to left, then release | Verify that player continues to play file at earlier part of file at half speed | - ")); - }, - - - - basic_controls_for_streamed_audio_content: function() - { - -//*Note* For this test you need a playlist of streaming media urls. Suggest: http://202.6.74.107:8060/triplej.mp3 ; http://www.abc.net.au/streaming/triplej.asx ; rtsp://media1.abc.net.au/broadcast/triplej.rm ; mms://media3.abc.net.au/triplej ; depending on your platform and backend support. - - // Test meta data - testApplication = "Multimedia - Content Streaming"; - testBinary = "player"; - testGoal = "Verify playback of streaming audio media"; - testPreconditions = ""; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | In player application, Select or Tap [Open] | | - | In [Open File] navigate and highlight test (streaming) playlist file | | - | Select or Tap on selected file to return to player UI | Verify selected file has populated playlist | - | Highlight file in playlist by selecting or clicking it | | - | Select [Play] | Verify that stream is playing on device | - | Select [Pause] | Verify that stream is paused on device | - | | Verify that the [Pause] button has changed to a [Play] button | - | Select [Play] again | Verify that stream is playing on device | - | Select [Stop] | | - | Open local mp3 file in to play list and select it to play | Verify that the mp3 plays while the stream name is still present in the playlist | - | Re-select the stream in the playlist | Verify that the stream starts playing again | - | Select [Next File] | Verify that the player started playing the next file in the playlist | - | Select [Previous File] | Verify that the original stream is playing again | - | During stream playback, have headphones connected to device | Verify that the sound is now playing through the headphones | - | Invoke a system notification on the device (such as an incoming SMS) | Verify that the device correctly transmits the audible system notification through the devices speakers and then returns to playing the stream through the headphones | - ")); - }, - - record_an_audio_file: function() - { - - // Test meta data - testApplication = "Multimedia - Recording Audio"; - testBinary = "audiorecorder"; - testGoal = "Verify that audio can be recorded."; - testPreconditions = ""; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Select Input Device | | - | Select Audio Codec | | - | Select File Container | | - | Select Sample Rate | | - | Select Quality and Bitrate | | - | Select Output... and select location and name of output file | | - | Select Record | Verify that [Record] button has changed in to [Stop] | - | | Verify that Duration is counting seconds | - | | Verify that Recording is displayed | - | Select Stop | Verify that Duration is now 0 | - | Select Output File in file browser | Verify that an audio file has been generated | - | Play output file in media player | Verify that audible audio is recorded in file | - ")); - }, - -pause_recording_an_audio_file: function() - { - - // Test meta data - testApplication = "Multimedia - Pause Recording Audio"; - testBinary = "audiorecorder"; - testGoal = "Verify API to be able to pause audio recording without unwanted artifacts."; - testPreconditions = ""; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Select Input Device | | - | Select Audio Codec | | - | Select File Container | | - | Select Sample Rate | | - | Select Quality and Bitrate | | - | Select Output... and select location and name of output file | | - | Select Record | Verify that [Record] button has changed in to [Stop] | - | | Verify that Duration is counting seconds | - | | Verify that Recording is displayed | - | Speak in to the microphone. Suggest counting from 1 to 5 | | - | Select Pause | Verify that instead of Duration, Paused is displayed | - | Keep speaking in to microfon, continue counting from 6 to 10 | | - | Select Resume | Verify that the counter has resumed the seconds count from where it was previously paused. | - | Continue counting from 11 to 15 in to the microphone | | - | After a arbitrary time, Stop the recording. | | - | Select Output File in file browser | Verify that an audio file has been generated | - | Play output file in media player | Verify that audible audio is recorded in file and that audio is only recorded for period that Pause was not selected | - | | Verify that the recording reproduces the counting from 1 to 5 then continues from 11 to 15 and that the counting from 6 - 10 is not recorded | - | | Verify there is no audible artifact that separates the two or more recording periods, that is that the joint is seamless | - ")); - }, -} diff --git a/tests/systemtests/camera/sys_camera.qtt b/tests/systemtests/camera/sys_camera.qtt deleted file mode 100644 index 781e50b..0000000 --- a/tests/systemtests/camera/sys_camera.qtt +++ /dev/null @@ -1,181 +0,0 @@ -/**************************************************************************** -** -** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). -** All rights reserved. -** Contact: Nokia Corporation (qt-info@nokia.com) -** -** This file is part of the Qt Mobility Components. -** -** $QT_BEGIN_LICENSE:LGPL$ -** GNU Lesser General Public License Usage -** This file may be used under the terms of the GNU Lesser General Public -** License version 2.1 as published by the Free Software Foundation and -** appearing in the file LICENSE.LGPL included in the packaging of this -** file. Please review the following information to ensure the GNU Lesser -** General Public License version 2.1 requirements will be met: -** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. -** -** In addition, as a special exception, Nokia gives you certain additional -** rights. These rights are described in the Nokia Qt LGPL Exception -** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. -** -** GNU General Public License Usage -** Alternatively, this file may be used under the terms of the GNU General -** Public License version 3.0 as published by the Free Software Foundation -** and appearing in the file LICENSE.GPL included in the packaging of this -** file. Please review the following information to ensure the GNU General -** Public License version 3.0 requirements will be met: -** http://www.gnu.org/copyleft/gpl.html. -** -** Other Usage -** Alternatively, this file may be used in accordance with the terms and -** conditions contained in a signed written agreement between you and Nokia. -** -** -** -** -** -** $QT_END_LICENSE$ -** -****************************************************************************/ - -//TESTED_COMPONENT=src/multimedia - -testcase = { - -/* Notes -*/ - initTestCase: function() - { - }, - - take_a_photo: function() - { - // Test meta data - testApplication = "Multimedia - Still Camera"; - testBinary = "declarative camera"; - testGoal = "Verify that a photo can be taken with the camera."; - testPreconditions = ""; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | If device has lens cover, make sure it is open | | - | Select Image tab to put camera in still mode | Verify the intended scene is reproduced in the preview pane/viewfinder | - | Select Capture Photo | Verify that image is shown on screen for preview | - | | Verify that a new file is in the Images folder and accessabble with the image viewer | - | Select given image | Verify that it is a true representation of the intended sceen | - | | Verify the image has no unintended artifacts and noise and is properly formatted | - ")); - }, - -change_camera_settings: function() -{ - // Test meta data - testApplication = "Multimedia - Still Camera"; - testBinary = "declarative camera"; - testGoal = "Verify that the camera can change its Still Camera settings successfully."; - testPreconditions = ""; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | If device has lens cover, make sure it is open | | - | Select the primary camera device from Menu/Devices | Verify the viewfinder is displaying the scene from the main camera device | - | Select Capture Photo | Verify that a photo was taken and that a preview image is shown on screen | - | Select the secandary camera device from Menu/Devices | Verify the viewfinder is displaying the scene from the secondary camera device | - | Select Capture Photo | Verify that a photo was taken from the secondary camera device and that a preview image is shown on screen | - | Change Exposure Compensatioin on the slider in the main UI | Verify that the change in value affects the picture qwality in expected fashion | - | Select Settings/File/Setrtings | Verify that you have an option to change Image Resolution, Image Format and Quality | - | Change Image Resolution to another supported resolution | Verify that you can take stills with various resolutions | - | Selct Flash always on from the setitngs menu | Verify that when photo is taken, the flash is always triggered | - | Select No Flash on from the menu | Verify that despite the lack of natural light, the flash will not trigger when taking photos | - | Change Image Format to another supported format | Verify that you can take stills with various Image Formats | - | Sellect Settings/Device/Secondary Device | Verify that you can see the view from the Front Facing Camera on the viewfinder | - | | Varify that you can take still images from the Front Facing Camera | - | Select Settings/File/Exit | Verify that the application has now closed | - - ")); -}, - - take_a_video: function() - { - // Test meta data - testApplication = "Multimedia - Video Camera"; - testBinary = "camera"; - testGoal = "Verify that the camera can capture and save an audio/video file."; - testPreconditions = ""; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | If device has lens cover, make sure it is open | | - | Select Video tab to put camera in video mode | Verify the intended scene is reproduced in the preview/viewfinder | - | Select Record Video | Verify that video is shown on screen for preview | - | Select Pause | Verify that the Recorded counter has stopped | - | Select Record again | Verify that the Recorded counter has continued counting | - | Select Stop | Verify that the recording has now stopped | - | | Verify that a new file is in the Images folder and accessabble with the player | - | Select given video | Verify that it is a true representation of the intended sceen | - | | Verify that the Pause in the recording has happened and that recording continued without an issue after that | - | | Verify the image has no unintended artifacts and noise and is properly formatted | - ")); - }, - - change_video_settings: function() - { - // Test meta data - testApplication = "Multimedia - Video Camera"; - testBinary = "camera"; - testGoal = "Verify that the camera can change its Video settings successfully."; - testPreconditions = ""; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | If device has lens cover, make sure it is open | | - | Select Video tab to put camera in video mode | Verify the intended scene is reproduced in the preview/viewfinder | - | In the Menu Bar, select Settings/Devices | Verify that you can select Primay and Secondary Camera on Device | - | Select Secondary Camera | Verify that devise is now showing video stram from Front Facing camera | - | Select Settings/File/Settings | Verify that you now have otion to select Audio Codecs, Resolution Sample Rate, Framerate, Quality, Video Codecs and Container Format | - | Change Audio Codecs to another supported Codecs | Verify that camera can record | - | Change Resolutiuon to another supported Resolution | Verify that camera can record | - | Change Sample Rate to another supported Sample Rate | Verify that camera can record | - | Change Framerate to another supported Framerate | Verify that camera can record | - | Change Quality | Verify that camera can record | - | Change Video Codecs to another supported Video Codecs | Verify that camera can record | - | Change Container Format | Verify that camera can record | - | Change Quality | Verify that camera can record | - ")); - }, - - - - - - -} diff --git a/tests/systemtests/radio/sys_radio.qtt b/tests/systemtests/radio/sys_radio.qtt deleted file mode 100644 index fa82b63..0000000 --- a/tests/systemtests/radio/sys_radio.qtt +++ /dev/null @@ -1,161 +0,0 @@ -/**************************************************************************** -** -** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). -** All rights reserved. -** Contact: Nokia Corporation (qt-info@nokia.com) -** -** This file is part of the Qt Mobility Components. -** -** $QT_BEGIN_LICENSE:LGPL$ -** GNU Lesser General Public License Usage -** This file may be used under the terms of the GNU Lesser General Public -** License version 2.1 as published by the Free Software Foundation and -** appearing in the file LICENSE.LGPL included in the packaging of this -** file. Please review the following information to ensure the GNU Lesser -** General Public License version 2.1 requirements will be met: -** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. -** -** In addition, as a special exception, Nokia gives you certain additional -** rights. These rights are described in the Nokia Qt LGPL Exception -** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. -** -** GNU General Public License Usage -** Alternatively, this file may be used under the terms of the GNU General -** Public License version 3.0 as published by the Free Software Foundation -** and appearing in the file LICENSE.GPL included in the packaging of this -** file. Please review the following information to ensure the GNU General -** Public License version 3.0 requirements will be met: -** http://www.gnu.org/copyleft/gpl.html. -** -** Other Usage -** Alternatively, this file may be used in accordance with the terms and -** conditions contained in a signed written agreement between you and Nokia. -** -** -** -** -** -** $QT_END_LICENSE$ -** -****************************************************************************/ - -//TESTED_COMPONENT=src/multimedia - -testcase = { - -/* Notes -Ensure radio reception is available in testing area -A device specific headset is required to be connected to device for radio testing -*/ - - initTestCase: function() - { - }, - - play_a_radio_transmission: function() - { - // Test meta data - testTitle = "Multimedia - Play Radio Transmission"; - testBinary = "radio"; - testSource ="$QTDIR/qtmultimediakit/examples/Radio" - testGoal = "Verify that radio stations can be played."; - testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antena to the device and must be connected."; - testGroups = "BAT, 1.2"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | | Verify that 0 KHz and No Signal is displayed | - | Select [Scan Up] | Audible white noise should be heard as the radio searches for a frequency lock. Frequency should be increasing in 100 KHz steps until a strong signal is found | - | | Verify that a radio signal can be heard. It is possible for the radio to lock on a silent station signal, in that case progress further up the frequencies | - | Once a strong audible signal is found | Verify that the stations frequency and Got Signal message is displayed | - | Select [Scan Up] | Verify that the radio has moved off the previous station and in progressing through the frequencies | - | Once on a radio station, Select [Freq Up] | Verify that the radio frequency has moved off the station by 100KHz and is stationary | - | Select [Freq Up] again | Verify that the radio frequency has moved up another 100KHz and is stationary | - | Select [Freq Down] twice | Verify that you are now at the frequency of the previous radio station and that the signal is audible | - | Select [Scan Down] | Verify that the radio has moved off the previous station, progressing through the frequencies, and finds the original station from this test | - | Exit the radio application | Verify that the radio station is no longer heard | - ")); - }, - - radio_interrupted_by_system_notification: function() - { - // Test meta data - testTitle = "Multimedia - Radio interrupted by System Notification"; - testBinary = "radio"; - testSource ="$QTDIR/qtmultimediakit/examples/Radio" - testGoal = "Verify that radio can recover audio playback from various system notifications."; - testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antena to the device and must be connected."; - testGroups = "BAT, 1.2"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Locate a strong radio station signal by scanning up/down | | - | While on a strong and audible radio signal, evoke a system notification on device (eg: incoming SMS, alarm notification) | Verify that the radio has muted, and after the system notification has been delivered, the radio reverts to outputting the audio signal back through the headphones | - | While on a strong and audible radio signal, call the device | Verify that the radio has been muted, and stays muted during the duration of the call, and resumes once the call has ended | - ")); - }, - - radio_volume_control: function() - { - // Test meta data - testTitle = "Multimedia - Radio Volume Control"; - testBinary = "radio"; - testGoal = "Verify that the radio volume can be controlled via volume controls."; - testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antena to the device and must be connected."; - testGroups = "BAT, 1.2"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Locate a strong radio station signal by scanning up or down the frequency | | - | While on a strong and audible radio signal, move volume slider to the right | Verify that the audio volume of the radio station is amplified | - | Move volume slider to the left | Verify that the audio volume is lowered | - | Move the volume slider all the way to the left | Verify that the sound is now completely muted | - | Return the volume to a value above 50% and click the Mute/unmute comend | Verify that the audio changes from being muted to unmuted and back | - ")); - }, - - display_radio_metadata: function() - { - // Test meta data - testTitle = "Multimedia - Display Radio Metadata"; - testBinary = "radio"; - testGoal = "Verify that the radio API can display properly formated meta data."; - testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antena to the device and must be connected."; - testGroups = "BAT, 1.2"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Locate a strong radio station signal by scanning up or down the frequency | Verify that the Frequency field is populated with the correct frequency for the given radio station | - | | Verify that the Volume field is displaying the proper volume % | - | Click on the Mute/Unmute comand | Verify that Muted field changes from 'false' to 'true' and back | - | | If applicable, confirm that the Station Name field is properly displayed | - | | If applicable, confirm that the Station Id field is properly displayed | - | | If applicable, confirm that the Program Type field is properly displayed | - | | If applicable, confirm that the PRadio Text field is properly displayed | - ")); - }, -} diff --git a/tests/systemtests/video/sys_video.qtt b/tests/systemtests/video/sys_video.qtt deleted file mode 100644 index 5922745..0000000 --- a/tests/systemtests/video/sys_video.qtt +++ /dev/null @@ -1,269 +0,0 @@ -/**************************************************************************** -** -** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). -** All rights reserved. -** Contact: Nokia Corporation (qt-info@nokia.com) -** -** This file is part of the Qt Mobility Components. -** -** $QT_BEGIN_LICENSE:LGPL$ -** GNU Lesser General Public License Usage -** This file may be used under the terms of the GNU Lesser General Public -** License version 2.1 as published by the Free Software Foundation and -** appearing in the file LICENSE.LGPL included in the packaging of this -** file. Please review the following information to ensure the GNU Lesser -** General Public License version 2.1 requirements will be met: -** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. -** -** In addition, as a special exception, Nokia gives you certain additional -** rights. These rights are described in the Nokia Qt LGPL Exception -** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. -** -** GNU General Public License Usage -** Alternatively, this file may be used under the terms of the GNU General -** Public License version 3.0 as published by the Free Software Foundation -** and appearing in the file LICENSE.GPL included in the packaging of this -** file. Please review the following information to ensure the GNU General -** Public License version 3.0 requirements will be met: -** http://www.gnu.org/copyleft/gpl.html. -** -** Other Usage -** Alternatively, this file may be used in accordance with the terms and -** conditions contained in a signed written agreement between you and Nokia. -** -** -** -** -** -** $QT_END_LICENSE$ -** -****************************************************************************/ - -//TESTED_COMPONENT=src/multimedia - -testcase = { - -/* Notes -Ensure 2 test .mp4 files are available on device -Ensure the device can ping destinations on the network (if applicable) -Have a video stream url available (e.g. http://clips.vorwaerts-gmbh.de/big_buck_bunny.mp4) -Ensure access to Internet available to device -Ensure an active SIM card is available on the device. As some video streaming tests are carrier spacific, it is recomended in Australia to have access to Testra, Optus and Vodafone SIM's -*/ - initTestCase: function() - { - }, - - play_a_video_file_data: { - mp4:[".mp4", "filename", "mpeg video layer 4"] - }, - - play_a_video_file: function(extension, filename, format) - { - // Test meta data - testApplication = "Multimedia - Play Video File"; - testBinary = "player"; - testGoal = "Verify that local, networked and carrier streamed video files can be played. "; - testPreconditions = "1. A test "+extension+" file is available on device.<br>2. Internet acces is enabled on the device.<br>3. Operator SIM cards are available to the device"; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Select [Open] | | - | In [Open File] select the "+filename+extension+" file to return to player UI | | - | Select [Play] to play the file | Verify selected file has populated playlist | - | Highlight file in playlist by clicking on it | | - | Select [Play] | Verify that .MP4 file is playing on device | - ")); - }, - - basic_controls_for_video_data: { - mp4:[".mp4", "filename", "mpeg video layer 4"] - }, - - basic_controls_for_video: function(extension, filename, format) - { - // Test meta data - testApplication = "Multimedia - Video Controls"; - testBinary = "player"; - testGoal = "Verify the API for basic video playback functionality"; - testPreconditions = "a test "+extension+" file is available on device."; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | Select [Open] | | - | In [Open File] select the "+filename+extension+" file to return to player UI | | - | Select [Play] to play the file | | - | Select [Pause] | Verify that file has paused | - | | Verify that the [Pause] icon has changed to a [Play] icon | - | Select [Play] | Verify that the [Play] icon has changed to a [Pause] icon | - | | Verify that file continues to play from where previously paused. | - | Select [Next File] | Verify that next file in playlist is playing from start | - | After some time (10-20 sec) Select [Beginning of File] control | Verify that current file is being played from start | - | Let arbitrary time pass, then Select [Beginning of File] control twice in quick succession.| Verify that previous file in playlist is playing from start | - | Select [Stop] | Verify that file has stopped playing | - | Select [Play] | Verify that file continues to play from start of file. | - | Let file play till end | Verify player stops at end of file. | - | Start playing file. | | - | After arbitrary time, Select [Stop] | | - | Select [Next File] | Verify that next file in playlist is highlighted | - | | Verify that file is not automatically playing | - | Select [Beginning of File] | Verify that previous file in playlist is highlighted | - | Select file in playlist | Verify that file plays in player. | - | Select number of files greater than can be displayed without scrolling in to playlist | Verify that list can be scrolled through | - | With file playing, verify that hardware keys can change volume up and down | | - | With file playing, verify that UI volume control slider can change volume up and down | | - | Select volume at 50% (or thereabout) | | - | Select [Mute] control | Verify that sound is muted while file is playing | - | | Verify that [Mute] control is displaying the Muted icon | - | Select [Mute] control again | Verify that sound has reverted back to level selected prior to muting | - | Drag positional slider to right, then release | Verify that player continues to play file at later part of file | - | Drag positional slider to left, then release | Verify that player continues to play file at earlier part of file | - | Start playing file | | - | Select [FullScreen] control | Verify that video is now playing in Fullscreen mode | - | When at end of current file | Verify that next file in playlist is being played | - | When at last file in playlist and at end of file | Verify that fullscreen mode is exited and user returned to player interface and that [FullScreen] is no longer selected. | - ")); - }, - - seek_controls_for_video: function() - { - // Test meta data - testApplication = "Multimedia - Video Seek"; - testBinary = "player"; - testGoal = "Verify the API for Fast Forward/Rewind functionality."; - testPreconditions = "Video files are available for testing on the device."; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | While playing a video file, Select or Tap on [1.0] (Multiplier) control | | - | Select [2.0] | Verify that file is playing at double speed | - | Select [Multiplier] control | | - | Select [0.5] | Verify that file is playing at half speed | - ")); - }, - - basic_controls_for_streamed_content: function() - { - -//*Note* In order to play stream on Maemo, invoke player with following command from console: -// run-standalone.sh ./player http://202.6.74.107:8060/triplej.mp3 -//*Note* For this test you need a playlist of streaming media urls. Suggest: http://202.6.74.107:8060/triplej.mp3 ; http://www.abc.net.au/streaming/triplej.asx ; rtsp://media1.abc.net.au/broadcast/triplej.rm ; mms://media3.abc.net.au/triplej ; depending on your platform and backend support. - - // Test meta data - testApplication = "Multimedia - Content Streaming"; - testBinary = "player"; - testGoal = "Verify various forms of video streaming."; - testPreconditions = ""; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | In player application, Select or Tap [Open] | | - | In [Open File] navigate and highlight test (streaming) playlist file | | - | Select or Tap on selected file to return to player UI | Verify selected file has populated playlist | - | Highlight file in playlist by selecting or clicking it | | - | Select [Play] | Verify that stream is playing on device | - | Select [Pause] | Verify that stream is paused on device | - | | Verify that the [Pause] button has changed to a [Play] button | - | Select [Play] again | Verify that stream is playing on device | - | Select [Stop] | | - | Open local mp3 file in to play list and select it to play | Verify that the mp3 plays while the stream name is still present in the playlist | - | Re-select the stream in the playlist | Verify that the stream starts playing again | - | Select [Next File] | Verify that the player started playing the next file in the playlist | - | Select [Previous File] | Verify that the original stream is playing again | - | During stream playback, have headphones connected to device | Verify that the sound is now playing through the headphones | - | Invoke a system notification on the device (such as an incoming SMS) | Verify that the device correctly transmits the audible system notification through the devices speakers and then returns to playing the stream through the headphones | - ")); - }, - - take_a_video: function() - { - // Test meta data - testApplication = "Multimedia - Video Camera"; - testBinary = "camera"; - testGoal = "Verify that the camera can capture and save an audio/video file."; - testPreconditions = ""; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | If device has lens cover, make sure it is open | | - | Select Video tab to put camera in video mode | Verify the intended scene is reproduced in the preview/viewfinder | - | Select Record Video | Verify that video is shown on screen for preview | - | Select Pause | Verify that the Recorded counter has stopped | - | Select Record again | Verify that the Recorded counter has continued counting | - | Select Stop | Verify that the recording has now stopped | - | | Verify that a new file is in the Images folder and accessabble with the player | - | Select given video | Verify that it is a true representation of the intended sceen | - | | Verify that the Pause in the recording has happened and that recording continued without an issue after that | - | | Verify the image has no unintended artifacts and noise and is properly formatted | - ")); - }, - - change_video_settings: function() - { - // Test meta data - testApplication = "Multimedia - Video Camera"; - testBinary = "camera"; - testGoal = "Verify that the camera can change its Video settings successfully."; - testPreconditions = ""; - testGroups = "BAT"; - - // Test steps - prompt(twiki("---+++ " + testApplication + "<br><br> - *Goal:* " + testGoal + "<br> - *Pre-Requisites:* " + testPreconditions + "<br> - *Tested Binary:* " + testBinary + "<br> - - | *Step* | *Verification* | - | Launch " + testBinary + " | App launches normally | - | If device has lens cover, make sure it is open | | - | Select Video tab to put camera in video mode | Verify the intended scene is reproduced in the preview/viewfinder | - | In the Menu Bar, select Settings/Devices | Verify that you can select Primay and Secondary Camera on Device | - | Select Secondary Camera | Verify that devise is now showing video stram from Front Facing camera | - | Select Settings/File/Settings | Verify that you now have otion to select Audio Codecs, Resolution Sample Rate, Framerate, Quality, Video Codecs and Container Format | - | Change Audio Codecs to another supported Codecs | Verify that camera can record | - | Change Resolutiuon to another supported Resolution | Verify that camera can record | - | Change Sample Rate to another supported Sample Rate | Verify that camera can record | - | Change Framerate to another supported Framerate | Verify that camera can record | - | Change Quality | Verify that camera can record | - | Change Video Codecs to another supported Video Codecs | Verify that camera can record | - | Change Container Format | Verify that camera can record | - | Change Quality | Verify that camera can record | - ")); - }, - -} |