path: root/QtMobility/sys_location/sys_location.qtt

/****************************************************************************
**
** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
** All rights reserved.
** Contact: Nokia Corporation (qt-info@nokia.com)
**
** This file is part of QtUiTest.
**
** $QT_BEGIN_LICENSE:LGPL$
** No Commercial Usage
** This file contains pre-release code and may not be distributed.
** You may use this file in accordance with the terms and conditions
** contained in the Technology Preview License Agreement accompanying
** this package.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL included in the
** packaging of this file.  Please review the following information to
** ensure the GNU Lesser General Public License version 2.1 requirements
** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain additional
** rights.  These rights are described in the Nokia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** If you have questions regarding the use of this file, please contact
** Nokia at qt-info@nokia.com.
**
**
**
**
**
**
**
**
** $QT_END_LICENSE$
**
****************************************************************************/

//TESTED_COMPONENT=src/location

testcase = {

    current_position: function()
    {
        prompt(twiki('---+++ Position is detected
    | *Step* | *Verification* |
    | Run the weatherinfo_with_location example | Verify that weather information for your local area is displayed |'
        ));
    },

    location_is_updated: function()
    {
        prompt(twiki('---+++ Position changes are detected
    1. Run the fetchgooglemaps example (sources are in examples/fetchgooglemaps).
    1. Note the initial position displayed in the example.
    1. Move to a different location.
    1. Note the updated position displayed in the example.
    1. Verify that the new position in step 4 corresponds to the move in step 3 (i.e. if the device moved north, the new position should clearly indicate this).'
       ));
    },

    third_party_position_source: function()
    {
        //test case for QTMOBILITY-873: Allow 3rd party position sources
        prompt(twiki('---+++ Position is detected via cusom plugin
    Note that GPS and internet connection is required for this test case
    | *Step* | *Verification* |
    | Run the testQtLocation application (this is part of BlueWeel project, sources are in git@scm.dev.nokia.troll.no:qtmobility/qtmobility-tests.git | |
    | Select the Custom Service | Verify that no "Unable to register location service" and "Not valid interface." messages appear |
    | Press the Update Map button | Verify that map was loaded and correct current position is displayed |'
        ));
    },

    shift_to_the_given_offset: function()
    {
        //test case for QTMOBILITY-658: Add a method to QGeoCoordinate which takes an offset and returns another QGeoCoordinate
        prompt(twiki('---+++ New coordinats are calculated
    Note that significand precision should be taken into account during comparing real numbers, that is why we consider 5.48417e-16 value equal to zero
    | *Step* | *Verification* |
    | Run the testQtLocation application | |
    | Select the MapNavigation | |
    | Fill in "0" in to Start Latitude field | |
    | Fill in "100" in to Start Longitude field | |
    | Select Distance/Bearing from *Pre-defined* dropdown list | |
    | Fill "1000000, 90" in to the given field | |
    | Press the Ok button | Verify that Destination fields are updated with 5.48417e-16 latitude and 108.9932 longitude |
    | Fill in "60" in to Start Latitude field | |
    | Fill in "100" in to Start Longitude field | |
    | Select Distance/Bearing from *Pre-defined* dropdown list | |
    | Fill "1000000, 180" in to the given field | |
    | Press the Ok button | Verify that Destination fields are updated with 51.0068 latitude and 100 longitude |
    | Fill in "60" in to Start Latitude field | |
    | Fill in "100" in to Start Longitude field | |
    | Select Distance/Bearing from *Pre-defined* dropdown list | |
    | Fill "1000000, 20" in to the given field | |
    | Press the Ok button | Verify that Destination fields are updated with 68.2523 latitude and 108.296 longitude |'
        ));
    },

    // Landmarks

    store_and_load_a_landmark_data: {
        // Valid landmarks are -90~90 latitude, and -180~180 longitude
        landmark : ["landmark", "20", "120"]
    },

    store_and_load_a_landmark: function(name, latitude, longitude)
    {
        startApplication("landmarkbrowser");
        select("Add Landmark");
        enter("Latitude", latitude);
        enter("Longitude", longitude);
        enter("Name", name);
        select("Ok");
        prompt("Verify that the landmark record is created");
    },

    negative_store_and_load_a_landmark_data: {
        // Landmarks outside the ranges -90~90 latitude, and -180~180 longitude
        bad_landmark_lat : ["bad_landmark", "100", "120"],
        bad_landmark_long : ["bad_landmark", "80", "300"]
    },

    negative_store_and_load_a_landmark: function(name, latitude, longitude)
    {
        startApplication("landmarkbrowser");
        select("Add Landmark");
        enter("Latitude", latitude);
        enter("Longitude", longitude);
        enter("Name", name);
        //expectMessageBox("Invalid");
        prompt("Verify a message box is shown indicating the values are ouside the valid range")
        select("Ok");
        select("Cancel");
    },

    sorted_search_based_on_category: function()
    {
        prompt(twiki('---+++ Landmarks for the specified category are displayed
    | *Step* | *Verification* |
    | Create Accomodation category | |
    | Create Businesses category | |
    | Run the landmarkbrowser application | |
    | Create A1 landmark  in Accomodation category | |
    | Create A2 landmark  in Accomodation category | |
    | Create BB landmark in Businesses category | |
    | Press the Set Filter button | |
    | Select the Category checkbox | |
    | Select Accomodation category | |
    | Press Ok button | Verify that only A1 and A2 landmark is in the list and they are present in alphabetical order |
    | Press the Set Filter button | |
    | Select Education category | |
    | Press Ok button | Verify that no landmarks are in the list |'
       ));
    },

    sort_landmarks_in_alphabetical_and_nearest: function()
    {
        prompt(twiki('---+++ Nearest landmarks are displayed
    | *Step* | *Verification* |
    | Run the landmarkbrowser application | |
    | Create landmark A(12;0) | |
    | Create landmark B(10;0) | |
    | Create landmark C(8;0) | |
    | Create landmark D(8;0) | |
    | Press Set Filter button | |
    | Select Proximity checkbox | |
    | Fill in 0 in to Lat field | |
    | Fill in 0 in to Long field |
    | Fill in 10000000 in to Radius field| |
    | Press Ok button | Verify that C, D, B, A landmarks are in the list (not in alphabetical order) |
    | Press Set Filter button | |
    | Change radius value to 1000000 | |
    | Press Ok button | Verify that only C and D landmarks are in the list |
    | Press Set Filter button | |
    | Deselect Proximity checkbox | |
    | Press Ok button | Verify that landmarks appear in alphabetical order from A to Z |'
       ));
    },

    landmarks_within_range_of_a_position: function()
    {
        prompt(twiki('---+++ Landmarks within range are displayed
    | *Step* | *Verification* |
    | Run the landmarkbrowser application | |
    | Create landmark A(12;0) | |
    | Create landmark B(10;0) | |
    | Create landmark C(8;0) | |
    | Create landmark D(8;0) | |
    | Press Set Filter button | |
    | Select Box checkbox | |
    | Fill in 9 in to Top Left Lat field | |
    | Fill in 0 in to Top Left Long field | |
    | Fill in 0 i to Bottom Right Lat filed | |
    | Fill in 1 in to Top Left Long field | |
    | Press Ok button | Verify that only C and D landmarks are in the list and landmarks appear in alphabetical order |'
       ));
    },
    
    create_edit_and_delete_a_landmark: function()
    {
    //Landmark manager provides notifications whenever landmarks are added, updated or deleted
        prompt(twiki('---+++ Landmarks are added, edited and deleted
    | *Step* | *Verification* |
    | Run the landmarkbrowser application | |
    | Press Add Landmark button | |
    | Fill in AAA in to Name field | |
    | Fill in 30 into Latitude field | |
    | Fill in 30 into Longitude field | |
    | Press Ok button | Verify that message "Landmark(s) have been added" appears on the screen |
    | Press Ok button | Verify that AAA landmark is in the landmarks list |
    | Select AAA landmark | |
    | Press Edit Landmark button | |
    | Change Latitude value to 40 | |
    | Change Longitude value to 40 | |
    | Change Name value to BBB | |
    | Press Ok button | Verify that message "Landmark(s) have been edited" appears on the screen |
    | Press Ok button | Verify that BBB landmark has new latitude and longitude |
    | Select BBB landmark | |
    | Press Delete Landmarks button | Verify that message "Landmark(s) have been removed" appears on the screen |
    | Press Ok button | Verify that only BBB landmark has been deleted |
    | Create 2 new landmarks A1 and A2 | |
    | Select both A1 and A2 landmarks | 
    | Press Delete Landmarks button | Verify that message "Landmark(s) have been removed" appears on the screen |
    | Press Ok button | Verify that only A1 and A2 landmarks have been deleted |'
        ));
    },

    enumerate_categories: function()
    {
        prompt(twiki('---+++ Categories are displayed
    | *Step* | *Verification* |
    | Run the landmarkbrowser application | |
    | Select Category tab | |
    | Create several categories | |
    | Swith to the Landmark tab and back to the Category tab | Verify that the created categories are present in the list |'
        ));
    },

    add_and_delete_a_category: function()
    {
    //Landmark manager provides notifications whenever categories are added, updated or deleted
        prompt(twiki('---+++ Categories are added, edited and deleted
    | *Step* | *Verification* |
    | Run the landmarkbrowser application | |
    | Select Category tab | |	
    | Press Add Category button | |
    | Fill in AAA in to Name field | |
    | Press Ok button | Verify that message "Category(ies) have been added" |
    | Press Ok button | Verify that AAA is added in list of categories in alphabetical order |
    | Press Add Category button | |
    | Fill in AAA in to Name field | |
    | Press Ok button | Verify that message "Add Category Failed: category already Exists" appears on the screen |
    | Press Ok button | |
    | Press Add Category button | |
    | Press Ok button | Verify that message "Category name must not be empty" appears on the screen |
    | Press Ok button | |
    | Select AAA category | |
    | Press Delete Categories button | Verify that message "Categoty(ies) have been removed" appears on the screen |
    | Press Ok button | Verify that list of categories does not contain AAA category only| 
    | Add A1 and A2 categories | |
    | Select A1 and A2 categories | |
    | Press Delete Categories button | Verify that message "Categoty(ies) have been removed" appears on the screen |
    | Press Ok button | Verify that list of categories does not contain A1 and A2 categories only |
    | Select some of predefined categories | |
    | Press Delete Category button | Verify tha message "Cannot delete a global category" appears on the screen |
    | Press Ok button | Verify that no categories have been deleted |'
        ));
    },

    // Maps and Navigation
    select_service_provider: function()
    {
        startApplication("geoservicedemo");
        select("Service Providers");
        select("nokia");
        select("Set Service Provider");
        prompt("Verify selected service provider is indicated as current service provider");
    },

    request_route_from_one_GPS_location_to_another_data: {
        route:["-27.575", "153.088", "-27.465", "153.023", "16050", "15989"]
    },

    request_route_from_one_GPS_location_to_another: function(lat1, long1, lat2, long2, distance1, distance2)
    {
        startApplication("geoservicedemo");
        select("Service Providers");
        select("nokia");
        select("Set Service Provider");
        select("Route");
        select("Request Route");
        enter(lat1);
        enter(long1);
        enter(lat2);
        enter(long2);
        select("Ok");
        prompt(twiki("Wait until the route is calculated (should be less than 10 seconds)"));
        prompt(twiki("Verify the instructions for segments 1 and 5 indicate to 'Head towards Logan rd' and 'Turn left on Logan rd'"));
        select("routes/route");
        compare(getText("distance"), distance1);
        select("Request Route");
        enter(lat2);
        enter(long2);
        enter(lat1);
        enter(long1);
        select("Ok");
        prompt(twiki('Wait until the route is calculated (should be less than 10 seconds)'));
        prompt(twiki('Verify the instructions for segments 1 and 2 indicate to Head towards Sedgebrook st and Turn right onto Sedgebrook st'));
        compare(getText("distance"), distance2);
    },

    displaying_a_map: function()
    {
        prompt(twiki('---+++ Different views are displayed
    Note that GPS and internet connection is required for this test case.
    Note that Nokia map engine supports only Street, Satellite and Terrain map types
    | *Step* | *Verification* |
    | Run the MapView application (sources are /tests/location-testing-tools/mapviewer) | Map for current location is displayed on the screen |
    | Press Option button | |
    | Press Street button (if button is enabled) | Map is drawn in Street view |
    | Press Option button | |
    | Press Satellite button (if button is enabled) | Map is drawn in Satellite view |
    | Press Option button | |
    | Press Terrain button (if button is enabled) | Map is drawn in Satellite view |'
        ));
    },

    zooming_support:function()
    {
        prompt(twiki('---+++ Map is zoomed in and out
    Note that internet connection is required for this test case.
    | *Step* | *Verification* |
    | Run the MapView application | Map is displayed on the screen |
    | Scroll mouse wheel down | Map is zoomed out correctly |
    | Scroll mouse wheel up | Map is zoomed in correctly|
    | Double click on the map | Map is zoomed in correctly, step of zooming is consistent|'
        ));
    },

    capturing_coordinates:function()
    {
        prompt(twiki('---+++ Coordinates are captured
    Note that internet connection is required for this test case.
    | *Step* | *Verification* |
    | Run the MapView application | Map is displayed on the screen |
    | Zoom in tha map to see Brisbane | |
    | Right mouse click on the square which represents Brisbane | |
    | Select Coordinates menu item | |
    | Select Capture menu item | Verify that dialog with coordinates appears on the screen. Latitude is about -27.46, longitude is about 153.02 |'
        ));
    },

    pixmap_object_zooming: function()
    {
        //test case for QTMOBILITY-757: Be able to prevent a QGeoMapPixmapObject from being scaled when zooming occurs
        //test case for QTMOBILITY-701: Add a QGraphicsItem based map object.
        //Test application testqtLocation covers just one use case meanwhile we have 8 different situation
        //depending on what units and transforms are in use (we have 4 types of units (PixelUnit, MeterUnit, RelativeArcSecondUnit, AbsoluteArcSecondUnit)
        //and 2 types of transforms (BilinearTransform, ExactTransform)). New set of tests has to be created as soon as testqtLocation is improved.
        prompt(twiki('---+++ Pixmap object is not scaled during zooming
    Note that GPS and internet connection is required for this test case
    | *Step* | *Verification* |
    | Run the testQtLocation application | |
    | Select the MapNavigation | |
    | Go to Map tab | Verify that map is loaded for current position |
    | Swith to MapObject mode | |
    | Tap on the screen to create pixmap object | Verify that blue square appears on the screen in place of touch |
    | Switch to Pan/Zoom mode | |
    | Increase zoom level | Verify that the blue square is not scaled |
    | Decrease zoom level | Verify that the blue square is not scaled |'
        ));
    },

    request_landmarks_for_given_coordinate_with_reverse_geocoding: function()
    {
        skip( "Nothing tested", SkipAll );
    },

    //TESTED_COMPONENT=plugins/declarative/location

    qml_display_map: function()
    {
        //test case for QTMOBILITY-796: QML for Maps & Navigation:mapping
        prompt(twiki('---+++ Map is displayed
    Note that GPS and internet connection is required for this test case
    | *Step* | *Verification* |
    | Run the testQtLocation application | |
    | Select the MapNavigation.qml | |
    | Tap on Mode button | Verify that map is loaded for current position |'
        ));
    },

    qml_zoom_map: function()
    {
        //test case for QTMOBILITY-796: QML for Maps & Navigation:mapping
        prompt(twiki('---+++ Zoom in and out the map
    Note that GPS and internet connection is required for this test case
    | *Step* | *Verification* |
    | Run the testQtLocation application | |
    | Select the MapNavigation.qml | |
    | Tap on the Mode button | Verify that map is loaded |
    | Tap on Plus button | Verify that map is zoomed in |
    | Tap on Plus button | Verify that zoom level is decreased and map is displayed correctly with new zoom level |'
        ));
    }


}  // end of testcase


/*

----Maps And Navigation use cases

    list_of_way_points: function() {    },

    distinguish_pedestrian_and_car_navigation: function() {    },

    find_matching_landmarks_for_given_search_criteria_with_geocoding: function() {    },

    provide_map_for_given_coordinate: function() {    },

    online_and_offline: function() {    }

*/