aboutsummaryrefslogtreecommitdiffstats
path: root/sources/pyside2/PySide2/QtScript
Commit message (Collapse)AuthorAgeFilesLines
* Cleanup pointer whitespace everywhereChristian Tismer2019-06-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Among other files to fix, basewrapper.(cpp|h) was full of uncommon pointer whitespace. After fixing that, I could not resist and fixed also libshiboken, generators, and after acceptance also PySide. Most of the time, this regex worked fine (\w\w+)([*&]+)[ ]*(?![&*]*[/=]) replaced with \1 \2 but everything was checked by hand. I did not touch the shiboken tests which are quite hairy. It turned out that inserting a space between a variable and asterisk causes a crash of shiboken, if the same line contains "CONVERTTOCPP". This was temporarily fixed by adding another space after it. Example.. sources/pyside2/PySide2/glue/qtcore.cpp line 977 QByteArray * cppSelf = %CONVERTTOCPP[QByteArray *](obj); //XXX /|\ omitting this space crashes shiboken! cppgenerator.cpp was special, since it was modified to _generate_ correct pointer whitespace. This caused a few testcases to fail, which had to be adjusted, again. This was difficult since some internal names must end on "*" and generated code normally not. Removing the last errors involved binary search on path sets... Apply C++ 11 fixits to the changed code, where applicable. Done-with: Friedemann.Kleint@qt.io Task-number: PYSIDE-1037 Change-Id: I4ac070f52c5efb296c05d581c9d46e6f397a6c81 Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org> Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
* Declare XML files to be in encoding UTF-8Friedemann Kleint2019-04-181-1/+1
| | | | | | | | Some XML tools trip over the missing character set. Change-Id: Icbe1b2485325b70c4772b6a370a98fd529437a8a Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* Modernize cmake buildAlexandru Croitor2019-02-071-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a CMake super project that includes the shiboken2, PySide2 and pyside2-tools subprojects, so that it's possible to build everything from Qt Creator (or any other IDE that supports CMake) with minimal set up effort, and thus inform the IDE CMake integration of all relevant files, for easier code editing, navigation and refactoring. This also lays the foundation for allowing 3rd parties to use the shiboken2 generator to generate custom modules. This is achieved by eliminating various hardcoded paths for libraries and include directories. Start using CMake targets throughout the build code to correctly propagate link flags and include dirs for libshiboken and shiboken2 executable targets. Same for the libpyside target. Generate two separate cmake config files (build-tree / install-tree) that can be used with find_package(Shiboken2), to make sure that the PySide2 project can be built as part of the super project build. This is currently the only way I've found to allow the super build to work. Note that for the build-tree find_package() to work, the CMAKE_MODULE_PATH has to be adjusted in the super project file. The generated config files contain variables and logic that allow usage of the installed shiboken package in downstream projects (PySide2). This involves things like getting the includes and libraries for the currently found python interpreter, the shiboken build type (release or debug), was shiboken built with limited api support, etc. Generate 2 separate (build-tree and install-tree) config files for PySide2, similar to how it's done for the shiboken case, for pyside2-tools to build correctly. Install shiboken2 target files using install(EXPORT) to allow building PySide2 with an installed Shiboken2 package (as opposed to one that is built as part of the super project). Same with PySide2 targets for pyside2-tools subproject. Make sure not to redefine uninstall targets if they are already defined. Add a --shorter-paths setup.py option, which would be used by the Windows CI, to circumvent creating paths that are too long, and thus avoiding build issues. Output the build characteristics / classifiers into the generated build_history/YYYY-MM-DD_AAAAAA/build_dir.txt file, so it can be used by the test runner to properly filter out blacklisted tests. This was necessary due to the shorter paths options. Fix various issues regarding target includes and library dependencies. Remove certain duplicated cmake code (like limited api check and build type checks) in PySide2, given that that information will now be present in the exported shiboken2 config file. Include a short README.cmake.md file that describes how to build the super project. References used https://rix0r.nl/blog/2015/08/13/cmake-guide/ https://pabloariasal.github.io/2018/02/19/its-time-to-do-cmake-right/ https://gist.github.com/mbinna/c61dbb39bca0e4fb7d1f73b0d66a4fd1 https://cliutils.gitlab.io/modern-cmake/chapters/basics/functions.html https://cmake.org/cmake/help/v3.0/manual/cmake-packages.7.html https://github.com/ComicSansMS/libstratcom/blob/master/CMakeLists.txt Abandoned approach using ExternalProject references: https://cmake.org/cmake/help/latest/module/ExternalProject.html https://stackoverflow.com/questions/44990964/how-to-perform-cmakefind-package-at-build-stage-only Fixes: PYSIDE-919 Change-Id: Iaa15d20b279a04c5e16ce2795d03f912bc44a389 Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
* Make it hard to use the create_pyside_module function incorrectlyAlexandru Croitor2018-12-071-10/+7
| | | | | | | | | | | | Rewrite the function to use keyword arguments instead of ordered arguments. Also add error detection when required arguments are not passed, or have a typo in them. Adjust all the module cmake files to use keyword arguments. Change-Id: I7bb0c6561d7dca1e7f673e29eb457da50ae5df04 Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org> Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
* Install snippets glue codeCristian Maureira-Fredes2018-11-281-1/+8
| | | | | | | | | | | | | The module-specific glue files as well as the standalone glue files are now installed into the PySide2 package. The glue files are now also listed as dependencies for the shiboken generator run, which means that modifying those files will now correctly force a shiboken re-run for the relevant modules. Change-Id: I545c7ada379fafb7f225d0b0f5ce495bf6d4795d Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io> Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
* Move inject-code snippets to separate filesCristian Maureira-Fredes2018-11-221-37/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When code must be modified or added to certain functions, we currently have two options: * Write a template and include it into the typesystem, * inject code directly at a certain place of the function entry. The problem with injecting raw code is that since it is an XML file, one need to escape protected symbols, like "<" and "&". Thanks to a couple of complementary commits, now we can place this code snippets on a separate file without triggering a whole module compiling process, since the typesystem itself will not be alterered. All the injected code from the typesystem was removed and placed into a single file per module inside a top-level directory called glue. Some small fixes were included mainly regarding styling of the code. Task-number: PYSIDE-834 Change-Id: I823e92d241a528d75d5940090008db9bf297f49e Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org> Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
* Pep 384 Final Cut: Remove PepTypeChristian Tismer2018-07-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | While trying to document the Limited API Project, it suddenly struck me: We can make the patch much much simpler and implement it without the necessity to have an extra PepType! Now I am happy to continue the documentation, because it is now no more improvable. This version will last as long as the layout of PyTypeObject does not change substantially. When that happens, then we need to rewrite stuff with the according PyType_GetSlot() access functions. These access functions will until then be complete enough so that we can live without the tricks like inventing a reduced PyTypeObject as was done in the current implementation. Task-number: PYSIDE-560 Change-Id: I49849cc377baa6794a5b53292691e21d6e2853ab Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org> Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* PEP 384-squash: Implement PEP 384Christian Tismer2018-05-301-3/+4
| | | | | | | | | | This is the condensed checkin of 18 commits which created the implementation of PEP 384. Task-number: PYSIDE-560 Change-Id: I834c659af4c2b55b268f8e8dc4cfa53f02502409 Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* Change license from all the filesCristian Maureira-Fredes2018-05-031-1/+1
| | | | | | | | | | | | | | | | | Removing the word 'project' from all the headers, and changing the PySide reference from the examples to Qt for Python: The following line was used inside the source/ and build_scripts/ directory: for i in $(grep -r "the Qt for Python project" * |grep -v "pyside2-tools" | awk '{print $1}' | sed 's/:.*//g');do sed -i 's/the\ Qt\ for\ Python\ project/Qt\ for\ Python/g' $i;done and the following line was used inside the examples/ directory: for i in $(grep -r "of the PySide" * |grep -v "pyside2-tools" | awk '{print $1}' | sed 's/:.*//g');do sed -i 's/of\ the\ PySide/of\ the\ Qt\ for\ Python/g' $i;done Change-Id: Ic480714686ad62ac4d81c670f87f1c2033d4ffa1 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io> Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
* Rename PySide references to Qt for PythonCristian Maureira-Fredes2018-04-271-1/+1
| | | | | | | | | When referring to the project one should use "Qt for Python" and for the module "PySide2" Change-Id: I36497df245c9f6dd60d6e160e2fc805e48cefcae Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* Merge remote-tracking branch 'origin/5.6' into 5.9Friedemann Kleint2017-11-062-3/+4
|\ | | | | | | Change-Id: I72583df407fc5b3caa8bf35fd997889a4ac86512
| * Remove dead / unused code regarding conversionsAlexandru Croitor2017-11-022-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's a lot of code that was previously used for doing conversions between C++ / Python types (apparently relying on extensive RTTI / typeid manipulations), which got superseded by a cleaner templated approach. The old code was left behind, and there were a few instances where it was still used even though it wasn't needed, like in QtScript typesystem XML and shiboken's enum handling. Remove the old code, apply the small changes needed to make it work with new the code. This is cleanup to reduce the confusion regarding conversion behavior, and also preparation for a proper implementation of handling "void*" types. Change-Id: I8f16bb31436f9a677bb2d64c7197c4375005b656 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
| * move everying into sources/pyside2Oswald Buddenhagen2017-05-222-0/+180
| | | | | | in preparation for a subtree merge. this should not be necessary to do in a separate commit, but git is a tad stupid about following history correctly without it.
* PySide2: Simplify typesystem path handlingFriedemann Kleint2017-11-062-4/+2
| | | | | | | | | | | | | | Modify the typesystem.xml files such that all dependent files are loaded via module (for example, QtCore/typesystem_core.xml). As a result, it is no longer necessary to add each dependent directory to the typesystem path; it is sufficient to pass the binary and source path of PySide2 and the source directory of the Qt module only. This requires rewriting the dependency checking for --reuse-build so that it loops over the source directories of the dependent Qt modules. Change-Id: Ib234c2673f4ee93cc8a3282fac69bcfcfaebd0ac Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* move everying into sources/pyside2 (5.9 edition)Oswald Buddenhagen2017-05-222-0/+180
in preparation for a subtree merge. this should not be necessary to do in a separate commit, but git is a tad stupid about following history correctly without it.
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-26 13:23:27 +0000