diff options
Diffstat (limited to 'examples/baremetal/stm32f4discovery/blueblink/iar/startup.s')
| -rw-r--r-- | examples/baremetal/stm32f4discovery/blueblink/iar/startup.s | 171 |
1 files changed, 171 insertions, 0 deletions
diff --git a/examples/baremetal/stm32f4discovery/blueblink/iar/startup.s b/examples/baremetal/stm32f4discovery/blueblink/iar/startup.s new file mode 100644 index 000000000..fe88e6bc8 --- /dev/null +++ b/examples/baremetal/stm32f4discovery/blueblink/iar/startup.s @@ -0,0 +1,171 @@ +/**************************************************************************** +** +** Copyright (C) 2019 Denis Shienkov <denis.shienkov@gmail.com> +** Contact: https://www.qt.io/licensing/ +** +** This file is part of the examples of Qbs. +** +** $QT_BEGIN_LICENSE:BSD$ +** Commercial License Usage +** Licensees holding valid commercial Qt licenses may use this file in +** accordance with the commercial license agreement provided with the +** Software or, alternatively, in accordance with the terms contained in +** a written agreement between you and The Qt Company. For licensing terms +** and conditions see https://www.qt.io/terms-conditions. For further +** information use the contact form at https://www.qt.io/contact-us. +** +** BSD License Usage +** Alternatively, you may use this file under the terms of the BSD license +** as follows: +** +** "Redistribution and use in source and binary forms, with or without +** modification, are permitted provided that the following conditions are +** met: +** * Redistributions of source code must retain the above copyright +** notice, this list of conditions and the following disclaimer. +** * Redistributions in binary form must reproduce the above copyright +** notice, this list of conditions and the following disclaimer in +** the documentation and/or other materials provided with the +** distribution. +** * Neither the name of The Qt Company Ltd nor the names of its +** contributors may be used to endorse or promote products derived +** from this software without specific prior written permission. +** +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." +** +** $QT_END_LICENSE$ +** +****************************************************************************/ + + MODULE ?cstartup + + SECTION CSTACK:DATA:NOROOT(3) + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + + PUBLIC _vectors_table + DATA +_vectors_table + ;; Generic interrupts offset. + DCD sfe(CSTACK) ; Initial stack pointer value. + DCD reset_handler ; Reset. + DCD 0 ; NMI. + DCD 0 ; Hard fault. + DCD 0 ; Memory management fault. + DCD 0 ; Bus fault. + DCD 0 ; Usage fault. + DCD 0 ; Reserved. + DCD 0 ; Reserved. + DCD 0 ; Reserved. + DCD 0 ; Reserved. + DCD 0 ; SVC. + DCD 0 ; Debug monitor. + DCD 0 ; Reserved. + DCD 0 ; PendSV. + DCD 0 ; SysTick. + ;; External interrupts offset. + DCD 0 ; Window WatchDog. + DCD 0 ; PVD through EXTI Line detection. + DCD 0 ; Tamper and TimeStamps through the EXTI line. + DCD 0 ; RTC Wakeup through the EXTI line. + DCD 0 ; FLASH. + DCD 0 ; RCC. + DCD 0 ; EXTI Line0. + DCD 0 ; EXTI Line1. + DCD 0 ; EXTI Line2. + DCD 0 ; EXTI Line3. + DCD 0 ; EXTI Line4. + DCD 0 ; DMA1 Stream 0. + DCD 0 ; DMA1 Stream 1. + DCD 0 ; DMA1 Stream 2. + DCD 0 ; DMA1 Stream 3. + DCD 0 ; DMA1 Stream 4. + DCD 0 ; DMA1 Stream 5. + DCD 0 ; DMA1 Stream 6. + DCD 0 ; ADC1, ADC2 and ADC3s. + DCD 0 ; CAN1 TX. + DCD 0 ; CAN1 RX0. + DCD 0 ; CAN1 RX1. + DCD 0 ; CAN1 SCE. + DCD 0 ; External Line[9:5]s. + DCD 0 ; TIM1 Break and TIM9. + DCD 0 ; TIM1 Update and TIM10. + DCD 0 ; TIM1 Trigger and Commutation and TIM11. + DCD 0 ; TIM1 Capture Compare. + DCD 0 ; TIM2. + DCD 0 ; TIM3. + DCD 0 ; TIM4. + DCD 0 ; I2C1 Event. + DCD 0 ; I2C1 Error. + DCD 0 ; I2C2 Event. + DCD 0 ; I2C2 Error. + DCD 0 ; SPI1. + DCD 0 ; SPI2. + DCD 0 ; USART1. + DCD 0 ; USART2. + DCD 0 ; USART3. + DCD 0 ; External Line[15:10]s. + DCD 0 ; RTC Alarm (A and B) through EXTI Line. + DCD 0 ; USB OTG FS Wakeup through EXTI line. + DCD 0 ; TIM8 Break and TIM12. + DCD 0 ; TIM8 Update and TIM13. + DCD 0 ; TIM8 Trigger and Commutation and TIM14. + DCD 0 ; TIM8 Capture Compare. + DCD 0 ; DMA1 Stream7. + DCD 0 ; FSMC. + DCD 0 ; SDIO. + DCD 0 ; TIM5. + DCD 0 ; SPI3. + DCD 0 ; UART4. + DCD 0 ; UART5. + DCD 0 ; TIM6 and DAC1&2 underrun errors. + DCD 0 ; TIM7. + DCD 0 ; DMA2 Stream 0. + DCD 0 ; DMA2 Stream 1. + DCD 0 ; DMA2 Stream 2. + DCD 0 ; DMA2 Stream 3. + DCD 0 ; DMA2 Stream 4. + DCD 0 ; Ethernet. + DCD 0 ; Ethernet Wakeup through EXTI line. + DCD 0 ; CAN2 TX. + DCD 0 ; CAN2 RX0. + DCD 0 ; CAN2 RX1. + DCD 0 ; CAN2 SCE. + DCD 0 ; USB OTG FS. + DCD 0 ; DMA2 Stream 5. + DCD 0 ; DMA2 Stream 6. + DCD 0 ; DMA2 Stream 7. + DCD 0 ; USART6. + DCD 0 ; I2C3 event. + DCD 0 ; I2C3 error. + DCD 0 ; USB OTG HS End Point 1 Out. + DCD 0 ; USB OTG HS End Point 1 In. + DCD 0 ; USB OTG HS Wakeup through EXTI. + DCD 0 ; USB OTG HS. + DCD 0 ; DCMI. + DCD 0 ; CRYP crypto. + DCD 0 ; Hash and RNG. + DCD 0 ; FPU. + + ;; Reset handler. + THUMB + PUBWEAK reset_handler + SECTION .text:CODE:REORDER:NOROOT(2) +reset_handler + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + END |