path: root/doc/addressbook-sdk.qdoc

/****************************************************************************
**
** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
** Contact: Nokia Corporation (qt-info@nokia.com)
**
** This file is part of the documentation of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL$
** No Commercial Usage
** This file contains pre-release code and may not be distributed.
** You may use this file in accordance with the terms and conditions
** contained in the either Technology Preview License Agreement or the
** Beta Release License Agreement.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL included in the
** packaging of this file.  Please review the following information to
** ensure the GNU Lesser General Public License version 2.1 requirements
** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain
** additional rights. These rights are described in the Nokia Qt LGPL
** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
** package.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU
** General Public License version 3.0 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.  Please review the following information to
** ensure the GNU General Public License version 3.0 requirements will be
** met: http://www.gnu.org/copyleft/gpl.html.
**
** If you are unsure which license is appropriate for your use, please
** contact the sales department at http://www.qtsoftware.com/contact.
** $QT_END_LICENSE$
**
****************************************************************************/

/*!
    \page tutorials-addressbook-sdk.html

    \startpage {index.html}{Qt Reference Documentation}
    \nextpage {examples/addressbook-sdk/part1}{Chapter 1}

    \title Address Book Tutorial
    \ingroup howto
    \ingroup tutorials
    \brief An introduction to GUI programming with Qt and Qt Creator,
    describing in detail how to put together a simple yet fully-
    functioning application.

    This tutorial gives an introduction to GUI programming using the Qt SDK.

    \image addressbook-tutorial-screenshot.png

    In the process, we will learn about some basic technologies provided by
    Qt, such as:

    \list
        \o  Widgets and layout managers
        \o  Container classes
        \o  Signals and slots
        \o  Input and output devices
    \endlist

    All these technologies will be introduced via the Qt Creator Integrated
    Development Environment (IDE).

    If you are completely new to Qt, please read \l{How to Learn Qt} if you
    have not already done so.

    The tutorial's source code is located in Qt's
    \c{examples/tutorials/addressbook} directory.

    Tutorial chapters:

    \list 1
        \o \l{examples/addressbook-sdk/part1}{Designing the User Interface}
        \o \l{examples/addressbook-sdk/part2}{Adding Addresses}
        \o \l{examples/addressbook-sdk/part3}{Navigating between Entries}
        \o \l{examples/addressbook-sdk/part4}{Editing and Removing Addresses}
        \o \l{examples/addressbook-sdk/part5}{Adding a Find Function}
        \o \l{examples/addressbook-sdk/part6}{Loading and Saving}
        \o \l{examples/addressbook-sdk/part7}{Additional Features}
    \endlist

    Although this little application does not look much like a fully-fledged
    modern GUI application, it uses many of the basic techniques that are used
    in more complex applications. After you have worked through it, we
    recommend checking out the \l{mainwindows/application}{Application}
    example, which presents a small GUI application, with menus, toolbars, a
    status bar, and so on.

    \table
        \o  \bold{Disclaimer}: Development of this tutorial is on-going.
            Currently, we have three parts complete. The remaining four parts
            will be available in the coming release.
    \endtable
*/


/*!
    \page tutorials-addressbook-sdk-part1.html
    \contentspage {Address Book Tutorial}{Contents}
    \nextpage {examples/addressbook-sdk/part2}{Chapter 2}
    \example examples/addressbook-sdk/part1
    \title Address Book 1 - Designing the User Interface

    The first part of this tutorial covers the design of the basic graphical
    user interface (GUI) we use for the Address Book application.

    The first step to creating a GUI program is to design the user interface.
    In this chapter, our goal is to set up the labels and input fields needed
    to implement a basic address book application. The figure below is a
    screenshot of our expected output.

    \image addressbook-tutorial-part1-screenshot.png

    We begin by launching Qt Creator and use it to generate a new project. To
    do this, select \gui New from the \gui File menu. In the
    \gui{New...} dialog, select \gui{Projects|Qt4 Gui Application}. For a step
    by step guide on how to create a \gui Project with Qt Creator, refer to the
    \l{Creating a Project in Qt Creator}. Ensure that you select QWidget as
    your subclass and name it \c AddressBook.

    Five files will be generated in this \gui{Project}:

    \list
        \o  \c{addressbook.pro} - the project file,
        \o  \c{addressbook.h} - the definition file for the \c AddressBook
            class,
        \o  \c{addressbook.cpp} - the implementation file for the
            \c AddressBook class,
        \o  \c{main.cpp} - the file containing a \c main() function, with an
            instance of \c AddressBook, and
        \o  \c{addressbook.ui} - the user interface file created with \QD.
    \endlist

    Now that we have all the files we need, let's move on to designing the user
    interface.


    \section1 Placing Widgets on the Form

    In the \gui{Project Sidebar}, double-click on the \c{addressbook.ui} file.
    The \QD plugin will be launched, allowing you to design your program's user
    interface.

    We require two \l{QLabel}s to label the input fields as well as a QLineEdit
    and a QTextEdit for the input fields. So, drag those widgets from the
    \gui{Widget Box} to your form. In the \gui{Property Editor}, set their
    \gui{objectName} property to \c nameLabel and \c addressLabel for the
    \l{QLabel}s, \c nameLine for the QLineEdit and finally, \c addressText for
    the QTextEdit.

    Next, we have to position the widgets properly, according to the screenshot
    earlier. We use a QGridLayout to position our labels and input fields in a
    structured manner. QGridLayout divides the available space into a grid and
    places widgets in the cells we specify with row and column numbers. The
    diagram below shows the layout cells and the position of our widgets. Place
    your widgets accordingly and save the form by choosing
    \gui{File | Save} or using the \key{Ctrl+S} shortcut.

    \image addressbook-tutorial-part1-labeled-screenshot.png

    A common mistake when designing user interfaces with \QD is overlooking the
    top level widget's layout. Unlike sub-layouts, which \QD displays with a
    red border, top level layouts have no graphical representation. Layouts are
    necessary for top level widgets, in this case QWidget, to ensure that when
    the window is resized, the widgets on the form will resize accordingly. You
    can try this out by pressing \key{Ctrl+Alt+R} now. To correct it, simply click
    anywhere on the form and select \gui{Lay out Horizontally} or
    \gui{Lay out Vertically}. The output will be the same. Now your widgets
    will resize correctly.


    \section1 The AddressBook Class

    The \l{examples/addressbook-sdk/part1/addressbook.h}{\c addressbook.h} file
    is used to define the \c AddressBook class.

    Let's take a look at what is already provided for us by Qt Creator. The
    \c AddressBook class has been defined as a QWidget subclass with a
    constructor and destructor.The Q_OBJECT macro is used to indicate that this
    class uses internationalization as well as Qt's signals and slots features.
    Although the macro implements some of Qt's more advanced features, for now,
    it is useful to think of it as a shortcut that allows us to use the
    \l{QObject::}{tr()} and \l{QObject::}{connect()} functions.

    \snippet examples/addressbook-sdk/part1/addressbook.h class definition

    Qt Creator's \gui{Project Wizard} provides us with the \c Ui object as a
    way to access the widgets on our form.

    The \l{examples/addressbook-sdk/part1/addressbook.cpp}{\c addressbook.cpp}
    file is used to implement the \c AddressBook class. The constructor sets up
    the \c ui file; the destructor deletes it.

    \snippet examples/addressbook-sdk/part1/addressbook.cpp class implementation


    \section1 The \c{main()} Function

    The \l{examples/addressbook-sdk/part1/main.cpp}{\c main.cpp} file contains
    the \c{main()} function  It is generated by the \gui{Project Wizard}.
    Within this function, a QApplication object, \c a, is instantiated.
    QApplication is responsible for various application-wide resources, such as
    the default font and cursor, and for running an event loop. Hence, there is
    always one QApplication object in every GUI application using Qt.

    \snippet examples/addressbook-sdk/part1/main.cpp main function

    The code constructs a new \c AddressBook widget on the stack and 
    invokes its \l{QWidget::}{show()} function to display it. 
    However, the widget will not be shown until the application's event
    loop is started. This is done by calling the application's
    \l{QApplication::}{exec()} function. Finally, the result returned by
    \l{QApplication::}{exec()} is used as the \c main() function's return
    value.


    \section1 Running the Application

    To run your application with Qt Creator, simply click on the Play button
    (image). A bare bones Address Book will be displayed. Click on the X button
    to close it.


    \section1 Qt Programming - Subclassing

    When writing Qt programs, we usually subclass Qt objects to add
    functionality. This is one of the essential concepts behind creating custom
    widgets or collections of standard widgets. Subclassing to extend or change
    the behavior of a widget has the following advantages:

    \list
        \o  We can write implementations of virtual or pure virtual functions
            to obtain exactly what we need, falling back on the base class's
            implementation when necessary.
        \o  It allows us to encapsulate parts of the user interface within a
            class, so that the other parts of the application do not need to
            know about the individual widgets in the user interface.
        \o  The subclass can be used to create multiple custom widgets in the
            same application or library, and the code for the subclass can be
            reused in other projects.
    \endlist

    Since Qt does not provided a specific address book widget, we subclass a
    standard Qt widget class and add features to it. The \c AddressBook class
    we create in this tutorial can be reused in situations where a basic
    address book is needed.
*/


/*!
    \page tutorials-addressbook-sdk-part2.html
    \previouspage Address Book 1 - Designing the User Interface
    \contentspage {Address Book Tutorial}{Contents}
    \nextpage {examples/addressbook-sdk/part3}{Chapter 3}
    \example examples/addressbook-sdk/part2
    \title Address Book 2 - Adding Addresses

    The next step to creating our basic address book application is to allow a
    little bit of user interaction.

    \image addressbook-tutorial-part2-add-contact.png

    We will provide a push button that the user can click to add a new contact.
    Also, some form of data structure is needed to store these contacts in an
    organized way.


    \section1 Placing Widgets on the Form

    We shall continue with the form we had from the last chapter; we have the
    labels and input fields set up, but we need to add push buttons to complete
    the process of adding a contact. So, we begin by breaking the existing
    layouts: select \gui{Break Layout} from the context menu. You might have to
    do a \gui{Select All} with \key{Ctrl+A} first.. Then, we add three push
    buttons. Double-click on each of them to set their text to "Add", "Submit",
    and "Cancel". We now require a vertical spacer to ensure that the push
    buttons will be laid out neatly; drag one from the \gui{Widget Box}.

    Next, lay out these three push buttons and the spacer vertically, by
    selecting all three of them (using the \key{Ctrl + click}) and choosing
    \gui{Lay out Vertically} from the context menu. Alternatively you can click
    on the ... button or use the \key{Ctrl+L} shortcut. We use the spacer as we
    do not want the buttons to be evenly spaced, but arranged closer to the top
    of the widget. The figure below shows the difference between using the
    spacer and not using it.

    \image addressbook-tutorial-part2-stretch-effects.png

    Select all the objects on the form (use \key{Ctrl+A}) and lay them out in a
    grid. Lastly, set the top level widget's layout by right-clicking anywhere
    on the widget and selecting \gui{Lay out Horizontally} or
    \gui{Lay out Vertically}.

    The final design of the form is shown in the screenshot below:

    ## image


    \section1 The AddressBook Class

    To ensure that the Address Book reacts to user interaction, we need to
    write slots for each push button that we added earlier. A slot is a
    function that responds to a particular signal. We will discuss this
    concept in further detail below. However, for an overview of Qt's signals
    and slots concept, you can refer to the \l{Signals and Slots} document.

    In the \l{examples/addressbook-sdk/part2/addressbook.h}{\c addressbook.h}
    file, we add the following code:

    \snippet examples/addressbook-sdk/part2/addressbook.h slot definition

    Next, we have to provide private members for the \c AddressBook class so
    that we can access these widgets freely throughout the class.

    \snippet examples/addressbook-sdk/part2/addressbook.h members1

    \note The names, e.g., \c addButton etc., correspond to the name of the
    actual object. You can modify them by double-clicking on their names within
    \QD's \gui{Object Inspector}.

    We need a container to store our address book contacts, so that we can
    traverse and display them. A QMap object, \c contacts, is used for this
    purpose as it holds a key-value pair: the contact's name as the \e key, and
    the contact's address as the \e value.

    \snippet examples/addressbook-sdk/part2/addressbook.h members2

    We also declare two private QString objects, \c oldName and \c oldAddress.
    These objects are needed to hold the name and address of hte contact that
    was last displayed, before the user clicked \gui Add. So, when the user
    clicks \gui Cancel, we can revert to displaying the details of the last
    contact.

    Let's move on to implementing the slots we defined earlier. Within the
    constructor of \c AddressBook, we extract the widgets from the form using
    the \c ui object by pointing our private members to them.

    \snippet examples/addressbook-sdk/part2/addressbook.cpp extract objects

    Then we set \c nameLine and \c addressText to read-only, so that we can
    only display but not edit existing contact details. We also hide
    \c submitButton and \c cancelButton as they will only be be displayed
    when the user clicks \gui Add, and this is handled by the \c addContact()
    function discussed below.

    \snippet examples/addressbook-sdk/part2/addressbook.cpp signal slot

    We connect the push buttons' \l{QAbstractButton::}{clicked()} signal to
    their respective slots. The figure below illustrates this.

    \image addressbook-tutorial-part2-signals-and-slots.png

    Finally, we set the window title to "Simple Address Book" using the
    \l{QWidget::}{setWindowTitle()} function.

    \snippet examples/addressbook-sdk/part2/addressbook.cpp window title

    \section2 The \c{addContact()} Function

    In this function, we begin by storing the last displayed contact details
    in \c oldName and \c oldAddress. Then we clear these input fields and turn
    off the read-only mode. The focus is set on \c nameLine and we display
    \c submitButton and \c cancelButton; but we disable \c addButton.

    \snippet examples/addressbook-sdk/part2/addressbook.cpp addContact

    \section2 The \c{submitContact()} Function

    This function can be divided into three parts:

    \list 1
        \o  We extract the contact's detail from \c nameLine and \c addressText
            and store them in QString objects. We also validate to ensure that
            the user did not click \gui Submit with empty input fields;
            otherwise, a QMessageBox is displayed to remind the user for a name
            and address.

            \snippet examples/addressbook-sdk/part2/addressbook.cpp submitContact part1

        \o  We then proceed to check if the contact already exists. If it does
            not exist, we add the contact to \c contacts and we display a
            QMessageBox to inform the user about this, preventing the user from
            adding duplicate contacts. Our \c contacts object is based on
            key-value pairs or name and address, hence, we want to ensure that
            \e key is unique.

            \snippet examples/addressbook-sdk/part2/addressbook.cpp submitContact part2

        \o  Once we have handled both cases mentioned above, we restore the
            push buttons to their normal state with the following code:

            \snippet examples/addressbook-sdk/part2/addressbook.cpp submitContact part3
    \endlist

    The screenshot below shows the QMessageBox object we use to display
    information messages to the user.

    \image addressbook-tutorial-part2-add-successful.png

    \section2 The \c{cancel()} Function

    This function restores the last displayed contact details and enables
    \c addButton, as well as hides \c submitButton and \c cancelButton.

    \snippet examples/addressbook-sdk/part2/addressbook.cpp cancel

    The general idea behind adding a contact is to give the user the
    flexibility to click \gui Submit or \gui Cancel at any time. The flowchart
    below further explains this concept:

    \image addressbook-tutorial-part2-add-flowchart.png


    \section1 Running the Application

    Run your application now. You will be able to add as many unique contacts
    as you like.

*/


/*!
    \page tutorials-addressbook-sdk-part3.html
    \previouspage Address Book 2 - Adding Addresses
    \contentspage {Address Book Tutorial}{Contents}
    \nextpage {examples/addressbook-sdk/part4}{Chapter 4}
    \example examples/addressbook-sdk/part3
    \title Address Book 3 - Navigating between Entries

    The address book application is now half complete. We need to add some
    functions to navigate between contacts. But first, we have to decide what
    sort of a data structure we would like to use to hold these contacts.

    In Chapter 2, we used a QMap of key-value pairs with the contact's name as
    the \e key, and the contact's address as the \e value. This works well for
    our case. However, in order to navigate and display each entry, a little
    bit of enhancement is needed.

    We enhance the QMap by making it replicate a data structure similar to a
    circularly-linked list, where all elements are connected, including the
    first element and the last element. The figure below illustrates this data
    structure;

    \image addressbook-tutorial-part3-linkedlist.png


    \section1 Placing Widgets on the Form

    So far, our application allows us to add new contacts. However, we also
    need to traverse the existing contacts. To do so, we add two push buttons
    at the bottom of our application and name them: \gui Next and
    \gui Previous. The buttons' \c objectName should be \c nextButton and
    \c previousButton, respectively. Then, we break our top level layout.
    Simply right-click on \c AddressBook in the \gui{Object Inspector} and
    then select \gui{Lay out|Break Layout}. Place the \gui Next and
    \gui Previous buttons in a horizontal layout. Now drag and drop the buttons
    together with their layout into the existing grid layout. The screenshot
    below illustrates what you will see as the button layout approaches the
    grid layout; drop it then.

    \image addressbook-tutorial-part3-drop-in-gridlayout

    Finally, set a top level layout for the widget again.

    \note We follow basic conventions for \c next() and \c previous() functions
    by placing the \c nextButton on the right and the \c previousButton on the
    left.


    \section1 The AddressBook Class

    Let's move on to the code. In order to add navigation functions to the
    address book application, we need to add two more slots to our
    \c AddressBook class: \c next() and \c previous().

    \snippet examples/addressbook-sdk/part3/addressbook.h slot definition

    We also define two more QPushButton objects:

    \snippet examples/addressbook-sdk/part3/addressbook.h members

    In the \c AddressBook constructor, we extract the push buttons from the
    \c ui object and disable them by default. This is because navigation is
    only enabled when there is more than one contact in the address book.

    \snippet examples/addressbook-sdk/part3/addressbook.cpp extract objects

    Next, we connect the buttons to their respective slots:

    \snippet examples/addressbook-sdk/part3/addressbook.cpp signal slot

    The screenshot below is our expected graphical user interface. Notice that
    it is getting closer to our final application.

    \image addressbook-tutorial-part3-screenshot.png

    Within our \c addContact() function, we have to disable the \gui Next and
    \gui Previous buttons so that the user does not attempt to navigate while
    adding a contact.

    \snippet examples/addressbook-sdk/part3/addressbook.cpp disable navigation

    Also, in our \c submitContact() function, we enable the navigation buttons,
    depending on the size of \c contacts. Asmentioned earlier, navigation is
    only enabled when there is more than one contact in the address book. The
    following lines of code demonstrates how to do this:

    \snippet examples/addressbook-sdk/part3/addressbook.cpp enable navigation

    We also include these lins of code in the \c cancel() function.

    Recall that we intend to emulate a circularly-linked list with our QMap
    object, \c contacts. So in the \c next() function, we obtain an iterator
    for \c contacts and then:

    \list
        \o If the iterator is not at the end of \c contacts, we increment it by
           one.
        \o If the iterator is at the end of \c contacts, we move it to the
           beginning of \c contacts. This gives us the illusion that our QMap
           is working like a circularly-linked list.
    \endlist

    \snippet examples/addressbook-sdk/part3/addressbook.cpp next

    Once we have iterated to the current object in \c contacts, we display its
    contents on \c nameLine and \c addressText.

    Similarly, for the \c previous() function,we obtain an iterator for
    \c contacts and then:

    \list
        \o  If the iterator is at the end of \c contacts, we clear the display
            and return.
        \o  If the iterator is at the beginning of \c contacts, we move it to
            the end.
        \o  We then decrement the iterator by one.
    \endlist

    \snippet examples/addressbook-sdk/part3/addressbook.cpp previous

    Again, we display the contents of the current object in \c contacts.

*/

/*!
\omit
    \page tutorials-addressbook-sdk-part4.html
    \previouspage Address Book 3 - Navigating between Entries
    \contentspage {Address Book Tutorial}{Contents}
    \nextpage {examples/addressbook-sdk/part5}{Chapter 5}
    \example examples/addressbook-sdk/part4
    \title Address Book 4 - Editing and Removing Addresses

    In this chapter, we look at ways to modify the contents of contacts stored
    in the address book application.

    #screenshot

    We now have an address book that not only holds contacts in an organized
    manner, but also allows navigation. It would be convenient to include edit
    and remove functions so that a contact's details can be changed when
    needed. However, this requires a little improvement, in the form of enums.

    In our previous chapters, we had two modes: \c AddingMode and
    \c NavigationMode - but they were not defined as enums. Instead, we enabled
    and disabled the corresponding buttons manually, resulting in multiple
    lines of repeated code.

    In this chapter, we define the \c Mode enum with three different values:
    \list
        \o \c{NavigationMode},
        \o \c{AddingMode}, and
        \o \c{EditingMode}.
    \endlist

    \section1 Placing Widgets on the Form

    To edit and remove contacts, we need two push buttons. Drag them and name
    them accordingly. Their \c objectName properties should be \c editButton
    and \c removeButton, respectively. The quickest way to place these two
    buttons into our existing layout, is to simply drag and drop them. Use the
    screenshot below as a guide:

    \image addressbook-tutorial-part4-drop-in-gridlayout.png


    \section1 The AddressBook Class

    We update the header file to contain the \c Mode enum:

    \snippet examples/addressbook-sdk/part4/addressbook.h enum

    We also add two new slots, \c editContact() and \c removeContact(), to our
    current list of public slots.

    \snippet examples/addressbook-sdk/part4/addressbook.h slot definition

    In order to switch between modes, we introduce the \c updateInterface()
    function to control the enabling and disabling of all push buttons. We also
    add two new push buttons, \c editButton and \c removeButton, for the edit
    and remove functions mentioned earlier.

    \snippet examples/addressbook-sdk/part4/adressbook.h updateInterface
    \dots
    \snippet examples/addressbook-sdk/part4/addressbook.h members

    Lastly, we declare \c currentMode to keep track of the enum's current mode.

    \snippet examples/addressbook-sdk/part4/addressbook.h current mode

    Let's begin by implementing the mode-changing features of the address book
    application. The \c editButton and \c removeButton are extracted and
    disabled by default, as the address book starts up with zero contacts in
    memory.

    \snippet examples/addressbook-sdk/part4/addressbook.cpp extract objects

    These buttons are then connected to their respective slots,
    \c editContact() and \c removeContact.

    \snippet examples/addressbook-sdk/part4/addressbook.cpp signal slot

    Now we look at the \c editContact() and \c removeContact() functions in
    detail.


    \section2 The \c{editContact()} Function

    This function stores the contact's old details in \c oldName and
    \c oldAddress, before switching the mode to \c EditingMode. In this mode,
    the \c submitButton and \c cancelButton are both enabled. Hence, the user
    can change the contact's details and click either button.

    \snippet examples/addressbook-sdk/part4/addressbook.cpp editContact

    Since we will reuse the \c submitButton for both: adding a new contact and
    editing an existing contact, we need to modify our existing
    \c submitContact() function. So, we divide it in two with an \c{if-else}
    statement.

    First, we check \c currentMode to see if it is in \c AddingMode. If it is,
    we proceed with our adding process.

    \snippet examples/addressbook-sdk/part4/addressbook.cpp submitContact part1
    \dots
    \snippet examples/addressbook-sdk/part4/addressbook.cpp submitContact part2

    Otherwise, we check to see if \c currentMode is in \c EditingMode. If it
    is, we compare \c oldName with \c name. If the name has changed, we remove
    the old contact from \c contacts and insert the newly updated contact.

    \snippet examples/addressbook-sdk/part4/addressbook.cpp submitContact part3

    If only the contact's address changed, i.e., \c oldAddress is not the same
    as \c address, we update the contact's address. Lastly, we set
    \c currentMode to \c NavigationMode. This is an important step as it
    re-enables all the disabled push buttons.

    To remove a contact from the address book, we implement the
    \c removeContact() function.

    \snippet examples/addressbook-sdk/part4/addressbook.cpp removeContact

    This function first checks to see if the contact exists in \c contacts. If
    it does, we display a QMessageBox, to confirm the removal with the user.
    Once the user has confirmed, we call \c previous() to ensure that the
    user interface shows another contact, and we remove the contact using
    \l{QMap}'s \l{QMap::}{remove()} function. As a courtesy, we display a
    QMessageBox to inform the user. Both the message boxes used in this
    function are shown below:

    # image


    \section2 The \c{updateInterface()} Function

    We mentioned this function earlier as a means to enable and disable the
    push buttons, depending on the current mode. The function updates the
    current mode according to the \c mode argument passed to it, assigning it
    to \c currentMode, before checking its value.\

    Each of the push buttons is then enabled or disabled, depending on the
    current mode. The code for \c AddingMode and \c EditingMode is shown below:

    \snippet examples/addressbook-sdk/part4/addressbook.cpp updateInterface part1

    For \c NavigationMode, however, we include conditions within the parameters
    of the QPushButton::setEnabled() function. This is to ensure that
    \c editButton and \c removeButton are enabled when there is at least one
    contact in the address book; \c nextButton and \c previousButton are only
    enabled when there is more than one contact in the address book.

    \snippet examples/addressbook-sdk/part4/addressbook.cpp updateInterface part2

    By performing the task of setting the mode and updating the user interface
    in the same function, we avoid the possibility of the user interface
    getting "out of sync" with the internal state of the application.

    To maintain consistency, we need to modify our \c addContact() and
    \c cancel() functions respectively. Below is the code:

    \snippet examples/addressbook-sdk/part4/addressbook.cpp addContact
    \dots
    \snippet examples/addressbook-sdk/part4/addressbook.cpp cancel

    \page tutorials-addressbook-sdk-part5.html
    \previouspage Address Book 4 - Editing and Removing Addresses
    \contentspage {Address Book Tutorial}{Contents}
    \nextpage {examples/addressbook-sdk/part6}{Chapter 6}
    \example examples/addressbook-sdk/part5
    \title Address Book 5 - Adding a Find Function

    In this chapter, we look at ways to locate contacts and addresses in the
    address book application.

    # image

    As we keep adding contacts to our address book, it becomes tedious to
    navigate them with the \gui Next and \gui Previous buttons. In this case,
    a \gui Find function would be more efficient in looking up contacts. The
    screenshot above shows the \gui Find button and its position on the panel
    of buttons.

    When the user clicks on the \gui Find button, it is useful to display a
    dialog that can prompt the user for a contact's name. Qt provides QDialog,
    which we subclass in this chapter, to implement a FindDialog class.

    \section1 Designing FindDialog

    #image

    We begin by adding a new \c{.ui} file to our project. Right click on your
    project and select \gui{Add New...}. In the \gui{New File} dialog, select
    \gui{Qt Designer Form}. In the \gui{Qt Designer Form} dialog, select
    \e{Dialog without buttons}. Name it \c{finddialog.ui} and add it to your
    project. The \QD plugin within Qt Creator will now display your new form.

    To replicate the screenshot above, we need a label, a line edit, and a push
    button. Drag these onto your form. Set their text accordingly and name them
    \c label, \c lineEdit, and \c findButton, respectively. Place these widgets
    in a horizontal layout. Then set a top level layout - either horizontal or
    vertical.


    \page tutorials-addressbook-sdk-part6.html
    \previouspage Address Book 5 - Adding a Find Function
    \contentspage {Address Book Tutorial}{Contents}
    \nextpage {examples/addressbook-sdk/part7}{Chapter 7}
    \example examples/addressbook-sdk/part6
    \title Address Book 6 - Loading and Saving


    \page tutorials-addressbook-sdk-part7.html
    \previouspage Address Book 6 - Loading and Saving
    \contentspage {Address Book Tutorial}{Contents}
    \example examples/addressbook-sdk/part7
    \title Address Book 7 - Additional Features

\endomit
*/